! Started logfile: J1035+3756_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:11:42 2019 obs J1035+3756_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1035+3756_S_2017_01_16_pus_uva.fits ! AN table 1: 195 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.510655 visibilities/baseline/integration-bin. ! Found source: J1035+3756 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 17924 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1035+3756_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 600 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 821 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 854 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1162 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992199Jy sigma=0.009236 ! Fit after self-cal, rms=0.956446Jy sigma=0.008927 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.991 mas, bmaj=6.446 mas, bpa=14.62 degrees ! Estimated noise=1070.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348818 Jy ! Component: 100 - total flux cleaned = 0.0424906 Jy ! Total flux subtracted in 100 components = 0.0424906 Jy ! Clean residual min=-0.003067 max=0.003087 Jy/beam ! Clean residual mean=0.000006 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0424906 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0424906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085228Jy sigma=0.000636 ! Fit after self-cal, rms=0.084204Jy sigma=0.000625 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.839 mas, bmaj=7.309 mas, bpa=9.707 degrees ! Estimated noise=664.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367616 Jy ! Component: 100 - total flux cleaned = 0.00440787 Jy ! Component: 150 - total flux cleaned = 0.00440938 Jy ! Component: 200 - total flux cleaned = 0.00443193 Jy ! Total flux subtracted in 200 components = 0.00443193 Jy ! Clean residual min=-0.001951 max=0.001827 Jy/beam ! Clean residual mean=0.000005 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0469225 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.0469226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083953Jy sigma=0.000623 ! Fit after self-cal, rms=0.083947Jy sigma=0.000623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.03 KP 1.08 ! LA 1.03 MK 1.00* NL 0.91 OV 1.05 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.10 KP 0.98 ! LA 0.94 MK 1.00* NL 1.04 OV 1.05 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 3. ! A total of 156 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 1.10 KP 1.01 ! LA 1.00 MK 1.00* NL 1.00 OV 0.98 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.99 HN 0.88 KP 1.00* ! LA 0.94 MK 1.00* NL 1.00* OV 0.96 ! PT 0.97 SC 0.40 ! ! ! Fit before self-cal, rms=0.083947Jy sigma=0.000623 ! Fit after self-cal, rms=0.072126Jy sigma=0.000625 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.769 mas, bmaj=7.277 mas, bpa=10.51 degrees ! Estimated noise=682.975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.62937e-05 Jy ! Component: 100 - total flux cleaned = -5.56564e-05 Jy ! Component: 150 - total flux cleaned = -0.000125454 Jy ! Component: 200 - total flux cleaned = -0.000168513 Jy ! Total flux subtracted in 200 components = -0.000168513 Jy ! Clean residual min=-0.001515 max=0.001702 Jy/beam ! Clean residual mean=0.000005 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.046754 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.046754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072113Jy sigma=0.000625 ! Fit after self-cal, rms=0.072021Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072021Jy sigma=0.000624 ! Fit after self-cal, rms=0.071660Jy sigma=0.000623 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.787 mas, bmaj=7.295 mas, bpa=9.87 degrees ! Estimated noise=681.811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.02628e-05 Jy ! Component: 100 - total flux cleaned = -0.000119119 Jy ! Component: 150 - total flux cleaned = -0.000155691 Jy ! Component: 200 - total flux cleaned = -0.000176966 Jy ! Total flux subtracted in 200 components = -0.000176966 Jy ! Clean residual min=-0.001434 max=0.001462 Jy/beam ! Clean residual mean=0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0465771 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0465771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071655Jy sigma=0.000623 ! Fit after self-cal, rms=0.071697Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.87768e-05 Jy ! Component: 100 - total flux cleaned = -0.000100912 Jy ! Component: 150 - total flux cleaned = -0.000110246 Jy ! Component: 200 - total flux cleaned = -0.000126952 Jy ! Total flux subtracted in 200 components = -0.000126952 Jy ! Clean residual min=-0.001397 max=0.001426 Jy/beam ! Clean residual mean=0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0464501 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0464501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071694Jy sigma=0.000623 ! Fit after self-cal, rms=0.071686Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071686Jy sigma=0.000623 ! Fit after self-cal, rms=0.071919Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.785 mas, bmaj=7.3 mas, bpa=9.71 degrees ! Estimated noise=681.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.20705e-05 Jy ! Component: 100 - total flux cleaned = -7.26467e-05 Jy ! Component: 150 - total flux cleaned = -9.0997e-05 Jy ! Component: 200 - total flux cleaned = -0.000107194 Jy ! Total flux subtracted in 200 components = -0.000107194 Jy ! Clean residual min=-0.001393 max=0.001356 Jy/beam ! Clean residual mean=0.000002 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0463429 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0463429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071916Jy sigma=0.000623 ! Fit after self-cal, rms=0.071937Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.6348e-05 Jy ! Component: 100 - total flux cleaned = -6.12827e-05 Jy ! Component: 150 - total flux cleaned = -6.12435e-05 Jy ! Component: 200 - total flux cleaned = -6.12328e-05 Jy ! Total flux subtracted in 200 components = -6.12328e-05 Jy ! Clean residual min=-0.001395 max=0.001353 Jy/beam ! Clean residual mean=0.000002 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0462817 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0462817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071936Jy sigma=0.000623 ! Fit after self-cal, rms=0.071937Jy sigma=0.000623 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071937Jy sigma=0.000623 ! Fit after self-cal, rms=0.072085Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.291 mas, bmaj=9.88 mas, bpa=-12.3 degrees ! Estimated noise=775.413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.44442e-05 Jy ! Component: 100 - total flux cleaned = -9.17965e-05 Jy ! Component: 150 - total flux cleaned = -0.000102059 Jy ! Component: 200 - total flux cleaned = -0.000101772 Jy ! Total flux subtracted in 200 components = -0.000101772 Jy ! Clean residual min=-0.001588 max=0.001333 Jy/beam ! Clean residual mean=0.000003 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0461799 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0461799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072084Jy sigma=0.000623 ! Fit after self-cal, rms=0.072083Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.44062e-05 Jy ! Component: 100 - total flux cleaned = -8.99655e-05 Jy ! Component: 150 - total flux cleaned = -8.45999e-05 Jy ! Component: 200 - total flux cleaned = -7.5967e-05 Jy ! Total flux subtracted in 200 components = -7.5967e-05 Jy ! Clean residual min=-0.001567 max=0.001306 Jy/beam ! Clean residual mean=0.000003 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.046104 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.046104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072082Jy sigma=0.000623 ! Fit after self-cal, rms=0.072074Jy sigma=0.000623 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.783 mas, bmaj=7.304 mas, bpa=9.643 degrees ! Estimated noise=681.478 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.783 x 7.304 at 9.643 degrees (North through East) ! Clean map min=-0.0013556 max=0.047047 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.946 mas, bmaj=6.492 mas, bpa=13.83 degrees ! Estimated noise=1071.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363594 Jy ! Component: 100 - total flux cleaned = 0.0443817 Jy ! Component: 150 - total flux cleaned = 0.0458892 Jy ! Component: 200 - total flux cleaned = 0.0463103 Jy ! Total flux subtracted in 200 components = 0.0463103 Jy ! Clean residual min=-0.002396 max=0.002236 Jy/beam ! Clean residual mean=0.000005 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0463102 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0463102 Jy ! Inverting map and beam ! Estimated beam: bmin=4.783 mas, bmaj=7.304 mas, bpa=9.643 degrees ! Estimated noise=681.478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.82533e-05 Jy ! Component: 100 - total flux cleaned = 5.81563e-05 Jy ! Component: 150 - total flux cleaned = 5.45634e-05 Jy ! Component: 200 - total flux cleaned = -2.32977e-05 Jy ! Total flux subtracted in 200 components = -2.32977e-05 Jy ! Clean residual min=-0.001544 max=0.001318 Jy/beam ! Clean residual mean=0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0462869 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0462869 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.291 mas, bmaj=9.88 mas, bpa=-12.3 degrees ! Estimated noise=775.413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.41802e-05 Jy ! Component: 100 - total flux cleaned = -5.92349e-05 Jy ! Component: 150 - total flux cleaned = -6.99253e-05 Jy ! Component: 200 - total flux cleaned = -0.00010139 Jy ! Total flux subtracted in 200 components = -0.00010139 Jy ! Clean residual min=-0.001662 max=0.001296 Jy/beam ! Clean residual mean=0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0461856 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.91376e-05 Jy ! Component: 100 - total flux cleaned = -4.49787e-05 Jy ! Component: 150 - total flux cleaned = -6.06674e-05 Jy ! Component: 200 - total flux cleaned = -8.21293e-05 Jy ! Total flux subtracted in 200 components = -8.21293e-05 Jy ! Clean residual min=-0.001645 max=0.001299 Jy/beam ! Clean residual mean=0.000003 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0461034 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.0461034 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.783 mas, bmaj=7.304 mas, bpa=9.643 degrees ! Estimated noise=681.478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.81267e-05 Jy ! Component: 100 - total flux cleaned = 8.21524e-07 Jy ! Component: 150 - total flux cleaned = -2.40598e-05 Jy ! Component: 200 - total flux cleaned = -4.55656e-05 Jy ! Total flux subtracted in 200 components = -4.55656e-05 Jy ! Clean residual min=-0.001428 max=0.001350 Jy/beam ! Clean residual mean=0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0460579 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.0460579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072077Jy sigma=0.000623 ! Fit after self-cal, rms=0.072075Jy sigma=0.000623 wmodel J1035+3756_S_2017_01_16_pus_map.mod ! Writing 49 model components to file: J1035+3756_S_2017_01_16_pus_map.mod wobs J1035+3756_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1035+3756_S_2017_01_16_pus_uvs.fits wwins J1035+3756_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1035+3756_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.1636e-05 Jy ! Component: 100 - total flux cleaned = -0.000222515 Jy ! Component: 150 - total flux cleaned = -0.000402459 Jy ! Component: 200 - total flux cleaned = -0.000576179 Jy ! Component: 250 - total flux cleaned = -0.000723144 Jy ! Component: 300 - total flux cleaned = -0.000844979 Jy ! Component: 350 - total flux cleaned = -0.000983332 Jy ! Component: 400 - total flux cleaned = -0.00111873 Jy ! Component: 450 - total flux cleaned = -0.00125051 Jy ! Component: 500 - total flux cleaned = -0.00132454 Jy ! Component: 550 - total flux cleaned = -0.0013972 Jy ! Component: 600 - total flux cleaned = -0.00143284 Jy ! Component: 650 - total flux cleaned = -0.00148526 Jy ! Component: 700 - total flux cleaned = -0.00153673 Jy ! Component: 750 - total flux cleaned = -0.00151977 Jy ! Component: 800 - total flux cleaned = -0.00156979 Jy ! Component: 850 - total flux cleaned = -0.00158632 Jy ! Component: 900 - total flux cleaned = -0.0016186 Jy ! Component: 950 - total flux cleaned = -0.00161869 Jy ! Component: 1000 - total flux cleaned = -0.00166594 Jy ! Component: 1050 - total flux cleaned = -0.00171231 Jy ! Component: 1100 - total flux cleaned = -0.00174299 Jy ! Component: 1150 - total flux cleaned = -0.00181845 Jy ! Component: 1200 - total flux cleaned = -0.00181843 Jy ! Component: 1250 - total flux cleaned = -0.00187744 Jy ! Component: 1300 - total flux cleaned = -0.00190665 Jy ! Component: 1350 - total flux cleaned = -0.00196431 Jy ! Component: 1400 - total flux cleaned = -0.00199264 Jy ! Component: 1450 - total flux cleaned = -0.00199272 Jy ! Component: 1500 - total flux cleaned = -0.0020763 Jy ! Component: 1550 - total flux cleaned = -0.00206263 Jy ! Component: 1600 - total flux cleaned = -0.00206299 Jy ! Component: 1650 - total flux cleaned = -0.00207642 Jy ! Component: 1700 - total flux cleaned = -0.00210295 Jy ! Component: 1750 - total flux cleaned = -0.00203707 Jy ! Component: 1800 - total flux cleaned = -0.00203698 Jy ! Component: 1850 - total flux cleaned = -0.00199804 Jy ! Component: 1900 - total flux cleaned = -0.00203655 Jy ! Component: 1950 - total flux cleaned = -0.00202389 Jy ! Component: 2000 - total flux cleaned = -0.00208692 Jy ! Component: 2050 - total flux cleaned = -0.00211178 Jy ! Component: 2100 - total flux cleaned = -0.00208699 Jy ! Component: 2150 - total flux cleaned = -0.00212387 Jy ! Component: 2200 - total flux cleaned = -0.00213607 Jy ! Component: 2250 - total flux cleaned = -0.00206372 Jy ! Component: 2300 - total flux cleaned = -0.00205178 Jy ! Component: 2350 - total flux cleaned = -0.00206363 Jy ! Component: 2400 - total flux cleaned = -0.00200467 Jy ! Component: 2450 - total flux cleaned = -0.00203957 Jy ! Component: 2500 - total flux cleaned = -0.00206271 Jy ! Component: 2550 - total flux cleaned = -0.00201661 Jy ! Component: 2600 - total flux cleaned = -0.00197101 Jy ! Component: 2650 - total flux cleaned = -0.00194842 Jy ! Component: 2700 - total flux cleaned = -0.00193731 Jy ! Component: 2750 - total flux cleaned = -0.00189273 Jy ! Component: 2800 - total flux cleaned = -0.00189286 Jy ! Component: 2850 - total flux cleaned = -0.00189288 Jy ! Component: 2900 - total flux cleaned = -0.00184929 Jy ! Component: 2950 - total flux cleaned = -0.001817 Jy ! Component: 3000 - total flux cleaned = -0.00181695 Jy ! Component: 3050 - total flux cleaned = -0.0018276 Jy ! Component: 3100 - total flux cleaned = -0.00179605 Jy ! Component: 3150 - total flux cleaned = -0.00174363 Jy ! Component: 3200 - total flux cleaned = -0.00168125 Jy ! Component: 3250 - total flux cleaned = -0.00166064 Jy ! Component: 3300 - total flux cleaned = -0.00166059 Jy ! Component: 3350 - total flux cleaned = -0.00159938 Jy ! Component: 3400 - total flux cleaned = -0.00158912 Jy ! Component: 3450 - total flux cleaned = -0.0015388 Jy ! Component: 3500 - total flux cleaned = -0.00146887 Jy ! Component: 3550 - total flux cleaned = -0.00142933 Jy ! Component: 3600 - total flux cleaned = -0.00139975 Jy ! Component: 3650 - total flux cleaned = -0.00134093 Jy ! Component: 3700 - total flux cleaned = -0.00129214 Jy ! Component: 3750 - total flux cleaned = -0.00126316 Jy ! Component: 3800 - total flux cleaned = -0.00126306 Jy ! Component: 3850 - total flux cleaned = -0.00118659 Jy ! Component: 3900 - total flux cleaned = -0.00113904 Jy ! Component: 3950 - total flux cleaned = -0.00105394 Jy ! Component: 4000 - total flux cleaned = -0.000978829 Jy ! Component: 4050 - total flux cleaned = -0.000978934 Jy ! Total flux subtracted in 4096 components = -0.000960511 Jy ! Clean residual min=-0.000574 max=0.000628 Jy/beam ! Clean residual mean=0.000001 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0450974 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 355 components and 0.0450973 Jy ![Exited script file: muppet] wmap "J1035+3756_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.783 x 7.304 at 9.643 degrees (North through East) ! Clean map min=-0.0011969 max=0.047039 Jy/beam ! Writing clean map to FITS file: J1035+3756_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0470386 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017396 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.10947 1.10947 2.21894 4.43789 8.87578 17.7516 35.5031 71.0062 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.783 x 7.304 at 9.643 degrees (North through East) ! Clean map min=-0.0011969 max=0.047039 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1035+3756_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:11:47 2019