! Started logfile: J1034-0211_X_2017_06_10_pus_uvs.log on Mon May 6 12:45:35 2019 obs J1034-0211_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1034-0211_X_2017_06_10_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977778 visibilities/baseline/integration-bin. ! Found source: J1034-0211 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 76032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1034-0211_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993311Jy sigma=0.008873 ! Fit after self-cal, rms=0.963361Jy sigma=0.008615 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6747 mas, bmaj=1.699 mas, bpa=-0.04738 degrees ! Estimated noise=594.096 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290877 Jy ! Component: 100 - total flux cleaned = 0.0360673 Jy ! Total flux subtracted in 100 components = 0.0360673 Jy ! Clean residual min=-0.001708 max=0.002746 Jy/beam ! Clean residual mean=-0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0360673 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0360673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076893Jy sigma=0.000655 ! Fit after self-cal, rms=0.075770Jy sigma=0.000645 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453285 Jy ! Component: 100 - total flux cleaned = 0.00662738 Jy ! Total flux subtracted in 100 components = 0.00662738 Jy ! Clean residual min=-0.001451 max=0.001962 Jy/beam ! Clean residual mean=-0.000003 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0426947 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.0426947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075413Jy sigma=0.000642 ! Fit after self-cal, rms=0.075408Jy sigma=0.000642 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.858 mas, bmaj=2.006 mas, bpa=-0.99 degrees ! Estimated noise=289.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271072 Jy ! Component: 100 - total flux cleaned = 0.00435015 Jy ! Component: 150 - total flux cleaned = 0.00542256 Jy ! Component: 200 - total flux cleaned = 0.00614956 Jy ! Total flux subtracted in 200 components = 0.00614956 Jy ! Clean residual min=-0.000953 max=0.001314 Jy/beam ! Clean residual mean=-0.000004 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0488443 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.0488443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075303Jy sigma=0.000641 ! Fit after self-cal, rms=0.075280Jy sigma=0.000640 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144164 Jy ! Component: 100 - total flux cleaned = 0.00218671 Jy ! Component: 150 - total flux cleaned = 0.00256975 Jy ! Component: 200 - total flux cleaned = 0.0026572 Jy ! Total flux subtracted in 200 components = 0.0026572 Jy ! Clean residual min=-0.000922 max=0.001080 Jy/beam ! Clean residual mean=-0.000003 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.0515015 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.0515015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075251Jy sigma=0.000640 ! Fit after self-cal, rms=0.075229Jy sigma=0.000640 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.02 KP 0.94 ! LA 0.94 MK 1.06 NL 0.97 OV 1.08 ! PT 1.04 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.05 HN 0.96 KP 0.99 ! LA 0.99 MK 1.10 NL 1.05 OV 1.09 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.98 KP 1.03 ! LA 1.00 MK 1.11 NL 1.06 OV 1.02 ! PT 1.01 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.06 HN 1.02 KP 0.96 ! LA 1.01 MK 1.06 NL 1.01 OV 1.06 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.96 KP 0.98 ! LA 0.98 MK 1.10 NL 1.01 OV 1.10 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 0.97 KP 0.99 ! LA 1.00 MK 1.09 NL 0.98 OV 1.09 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.91 KP 0.98 ! LA 0.99 MK 0.98 NL 1.04 OV 1.05 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.84 KP 0.99 ! LA 0.97 MK 1.00 NL 1.04 OV 1.07 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.96 KP 0.98 ! LA 1.00 MK 0.98 NL 1.05 OV 0.98 ! PT 1.08 SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.94 HN 0.87 KP 0.92 ! LA 1.02 MK 1.00 NL 1.01 OV 1.00 ! PT 1.01 SC 0.88 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.92 HN 0.92 KP 1.00 ! LA 0.95 MK 0.88 NL 0.94 OV 1.03 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.87 HN 0.72 KP 0.97 ! LA 0.98 MK 0.86 NL 1.03 OV 0.96 ! PT 0.98 SC 0.82 ! ! ! Fit before self-cal, rms=0.075229Jy sigma=0.000640 ! Fit after self-cal, rms=0.073334Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.856 mas, bmaj=2.004 mas, bpa=-0.8726 degrees ! Estimated noise=289.243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888249 Jy ! Component: 100 - total flux cleaned = 0.00123904 Jy ! Component: 150 - total flux cleaned = 0.00130138 Jy ! Component: 200 - total flux cleaned = 0.00134259 Jy ! Total flux subtracted in 200 components = 0.00134259 Jy ! Clean residual min=-0.000831 max=0.000854 Jy/beam ! Clean residual mean=-0.000003 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0528441 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.0528441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073321Jy sigma=0.000639 ! Fit after self-cal, rms=0.073321Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073321Jy sigma=0.000638 ! Fit after self-cal, rms=0.073361Jy sigma=0.000638 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8533 mas, bmaj=1.995 mas, bpa=-0.833 degrees ! Estimated noise=289.426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670711 Jy ! Component: 100 - total flux cleaned = 0.000907986 Jy ! Component: 150 - total flux cleaned = 0.000966878 Jy ! Component: 200 - total flux cleaned = 0.000977314 Jy ! Total flux subtracted in 200 components = 0.000977314 Jy ! Clean residual min=-0.000821 max=0.000764 Jy/beam ! Clean residual mean=-0.000002 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.0538214 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.0538214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073354Jy sigma=0.000638 ! Fit after self-cal, rms=0.073363Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361712 Jy ! Component: 100 - total flux cleaned = 0.000419333 Jy ! Component: 150 - total flux cleaned = 0.000407928 Jy ! Component: 200 - total flux cleaned = 0.000397344 Jy ! Total flux subtracted in 200 components = 0.000397344 Jy ! Clean residual min=-0.000810 max=0.000743 Jy/beam ! Clean residual mean=-0.000002 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.0542187 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.0542187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073358Jy sigma=0.000638 ! Fit after self-cal, rms=0.073352Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073352Jy sigma=0.000638 ! Fit after self-cal, rms=0.073306Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8513 mas, bmaj=1.986 mas, bpa=-0.789 degrees ! Estimated noise=288.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476485 Jy ! Component: 100 - total flux cleaned = 0.00060714 Jy ! Component: 150 - total flux cleaned = 0.0006545 Jy ! Component: 200 - total flux cleaned = 0.000680042 Jy ! Total flux subtracted in 200 components = 0.000680042 Jy ! Clean residual min=-0.000800 max=0.000730 Jy/beam ! Clean residual mean=-0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.0548988 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.0548988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073302Jy sigma=0.000637 ! Fit after self-cal, rms=0.073317Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250811 Jy ! Component: 100 - total flux cleaned = 0.000294483 Jy ! Component: 150 - total flux cleaned = 0.000285263 Jy ! Component: 200 - total flux cleaned = 0.000285145 Jy ! Total flux subtracted in 200 components = 0.000285145 Jy ! Clean residual min=-0.000812 max=0.000714 Jy/beam ! Clean residual mean=-0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.0551839 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.0551839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073314Jy sigma=0.000637 ! Fit after self-cal, rms=0.073310Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073310Jy sigma=0.000637 ! Fit after self-cal, rms=0.073375Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.085 mas, bmaj=3.335 mas, bpa=-2.396 degrees ! Estimated noise=383.592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521454 Jy ! Component: 100 - total flux cleaned = 0.000745783 Jy ! Component: 150 - total flux cleaned = 0.000780549 Jy ! Component: 200 - total flux cleaned = 0.000817186 Jy ! Total flux subtracted in 200 components = 0.000817186 Jy ! Clean residual min=-0.000788 max=0.000726 Jy/beam ! Clean residual mean=-0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0560011 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.0560011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073374Jy sigma=0.000637 ! Fit after self-cal, rms=0.073379Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.49524e-05 Jy ! Component: 100 - total flux cleaned = 6.57419e-05 Jy ! Component: 150 - total flux cleaned = 7.32104e-05 Jy ! Component: 200 - total flux cleaned = 6.63388e-05 Jy ! Total flux subtracted in 200 components = 6.63388e-05 Jy ! Clean residual min=-0.000800 max=0.000723 Jy/beam ! Clean residual mean=-0.000000 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0560674 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 0.0560674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073378Jy sigma=0.000637 ! Fit after self-cal, rms=0.073377Jy sigma=0.000637 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.981 mas, bpa=-0.7605 degrees ! Estimated noise=288.606 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8493 x 1.981 at -0.7605 degrees (North through East) ! Clean map min=-0.00076767 max=0.039254 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.671 mas, bmaj=1.686 mas, bpa=0.03295 degrees ! Estimated noise=583.134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0301298 Jy ! Component: 100 - total flux cleaned = 0.038161 Jy ! Component: 150 - total flux cleaned = 0.0429367 Jy ! Component: 200 - total flux cleaned = 0.0462659 Jy ! Total flux subtracted in 200 components = 0.0462659 Jy ! Clean residual min=-0.001496 max=0.001893 Jy/beam ! Clean residual mean=-0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0462659 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0462659 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.981 mas, bpa=-0.7605 degrees ! Estimated noise=288.606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343368 Jy ! Component: 100 - total flux cleaned = 0.005534 Jy ! Component: 150 - total flux cleaned = 0.0069347 Jy ! Component: 200 - total flux cleaned = 0.00793341 Jy ! Total flux subtracted in 200 components = 0.00793341 Jy ! Clean residual min=-0.001007 max=0.000900 Jy/beam ! Clean residual mean=-0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.0541993 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.0541993 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.085 mas, bmaj=3.335 mas, bpa=-2.396 degrees ! Estimated noise=383.592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108003 Jy ! Component: 100 - total flux cleaned = 0.00160686 Jy ! Component: 150 - total flux cleaned = 0.00179532 Jy ! Component: 200 - total flux cleaned = 0.00186246 Jy ! Total flux subtracted in 200 components = 0.00186246 Jy ! Clean residual min=-0.000836 max=0.000730 Jy/beam ! Clean residual mean=-0.000001 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.0560618 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.67496e-05 Jy ! Component: 100 - total flux cleaned = 3.16706e-05 Jy ! Component: 150 - total flux cleaned = 3.81837e-05 Jy ! Component: 200 - total flux cleaned = 4.44519e-05 Jy ! Total flux subtracted in 200 components = 4.44519e-05 Jy ! Clean residual min=-0.000827 max=0.000725 Jy/beam ! Clean residual mean=-0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0561062 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 66 components and 0.0561062 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.981 mas, bpa=-0.7605 degrees ! Estimated noise=288.606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101838 Jy ! Component: 100 - total flux cleaned = -5.68677e-05 Jy ! Component: 150 - total flux cleaned = -3.03403e-05 Jy ! Component: 200 - total flux cleaned = -4.23419e-05 Jy ! Total flux subtracted in 200 components = -4.23419e-05 Jy ! Clean residual min=-0.000886 max=0.000728 Jy/beam ! Clean residual mean=-0.000000 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.0560639 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.0560639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073380Jy sigma=0.000637 ! Fit after self-cal, rms=0.073378Jy sigma=0.000637 wmodel J1034-0211_X_2017_06_10_pus_map.mod ! Writing 81 model components to file: J1034-0211_X_2017_06_10_pus_map.mod wobs J1034-0211_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1034-0211_X_2017_06_10_pus_uvs.fits wwins J1034-0211_X_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J1034-0211_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268255 Jy ! Component: 100 - total flux cleaned = -0.000256487 Jy ! Component: 150 - total flux cleaned = -0.000196771 Jy ! Component: 200 - total flux cleaned = -9.42832e-05 Jy ! Component: 250 - total flux cleaned = -2.81722e-05 Jy ! Component: 300 - total flux cleaned = 5.77463e-05 Jy ! Component: 350 - total flux cleaned = 0.000141547 Jy ! Component: 400 - total flux cleaned = 0.000213324 Jy ! Component: 450 - total flux cleaned = 0.000263512 Jy ! Component: 500 - total flux cleaned = 0.000312639 Jy ! Component: 550 - total flux cleaned = 0.000341575 Jy ! Component: 600 - total flux cleaned = 0.000388741 Jy ! Component: 650 - total flux cleaned = 0.000397804 Jy ! Component: 700 - total flux cleaned = 0.000434249 Jy ! Component: 750 - total flux cleaned = 0.000470112 Jy ! Component: 800 - total flux cleaned = 0.000531725 Jy ! Component: 850 - total flux cleaned = 0.000540271 Jy ! Component: 900 - total flux cleaned = 0.000583179 Jy ! Component: 950 - total flux cleaned = 0.000634046 Jy ! Component: 1000 - total flux cleaned = 0.000659098 Jy ! Component: 1050 - total flux cleaned = 0.00067557 Jy ! Component: 1100 - total flux cleaned = 0.000699883 Jy ! Component: 1150 - total flux cleaned = 0.00072392 Jy ! Component: 1200 - total flux cleaned = 0.000723874 Jy ! Component: 1250 - total flux cleaned = 0.000739371 Jy ! Component: 1300 - total flux cleaned = 0.000731738 Jy ! Component: 1350 - total flux cleaned = 0.00075447 Jy ! Component: 1400 - total flux cleaned = 0.000769436 Jy ! Component: 1450 - total flux cleaned = 0.000761919 Jy ! Component: 1500 - total flux cleaned = 0.000769188 Jy ! Component: 1550 - total flux cleaned = 0.000791021 Jy ! Component: 1600 - total flux cleaned = 0.000798244 Jy ! Component: 1650 - total flux cleaned = 0.000791035 Jy ! Component: 1700 - total flux cleaned = 0.000805239 Jy ! Component: 1750 - total flux cleaned = 0.000819194 Jy ! Component: 1800 - total flux cleaned = 0.000826156 Jy ! Component: 1850 - total flux cleaned = 0.000839954 Jy ! Component: 1900 - total flux cleaned = 0.00085359 Jy ! Component: 1950 - total flux cleaned = 0.00087381 Jy ! Component: 2000 - total flux cleaned = 0.000887229 Jy ! Total flux subtracted in 2048 components = 0.000893951 Jy ! Clean residual min=-0.000353 max=0.000395 Jy/beam ! Clean residual mean=-0.000001 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.0569578 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 225 components and 0.0569578 Jy ![Exited script file: muppet] wmap "J1034-0211_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8493 x 1.981 at -0.7605 degrees (North through East) ! Clean map min=-0.00069246 max=0.03879 Jy/beam ! Writing clean map to FITS file: J1034-0211_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0387897 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000125771 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.972715 0.972715 1.94543 3.89086 7.78172 15.5634 31.1269 62.2537 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.038 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8493 x 1.981 at -0.7605 degrees (North through East) ! Clean map min=-0.00069246 max=0.03879 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1034-0211_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:45:40 2019