! Started logfile: J1033-2536_S_2017_10_21_pus_uvs.log on Sat May 11 20:56:10 2019 obs J1033-2536_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1033-2536_S_2017_10_21_pus_uva.fits ! AN table 1: 195 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.845869 visibilities/baseline/integration-bin. ! Found source: J1033-2536 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 23752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033-2536_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 422 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 287 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 967 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002307Jy sigma=0.007964 ! Fit after self-cal, rms=0.949463Jy sigma=0.007556 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=14.77 mas, bpa=-20.66 degrees ! Estimated noise=1318.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420087 Jy ! Component: 100 - total flux cleaned = 0.0513592 Jy ! Total flux subtracted in 100 components = 0.0513592 Jy ! Clean residual min=-0.005329 max=0.005260 Jy/beam ! Clean residual mean=-0.000006 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.0513592 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0513592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097576Jy sigma=0.000697 ! Fit after self-cal, rms=0.096276Jy sigma=0.000686 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=17.79 mas, bpa=-20.67 degrees ! Estimated noise=722.155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560892 Jy ! Component: 100 - total flux cleaned = 0.00809146 Jy ! Component: 150 - total flux cleaned = 0.00929049 Jy ! Component: 200 - total flux cleaned = 0.00953066 Jy ! Total flux subtracted in 200 components = 0.00953066 Jy ! Clean residual min=-0.004066 max=0.003399 Jy/beam ! Clean residual mean=-0.000041 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.0608899 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 0.0608899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095925Jy sigma=0.000684 ! Fit after self-cal, rms=0.095862Jy sigma=0.000683 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.06 FD 1.06 HN 0.92 KP 1.30 ! LA 1.03 MK 1.06 NL 1.04 OV 1.12 ! PT 0.77 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.91 KP 1.15 ! LA 1.08 MK 1.07 NL 1.03 OV 1.13 ! PT 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.06 HN 1.00 KP 1.15 ! LA 0.91 MK 1.12 NL 1.11 OV 1.04 ! PT 0.79 ! ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.74 KP 1.00* ! LA 0.74 MK 0.90 NL 1.00* OV 1.00* ! PT 0.74 ! ! ! Fit before self-cal, rms=0.095862Jy sigma=0.000683 ! Fit after self-cal, rms=0.092912Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=17.66 mas, bpa=-20.37 degrees ! Estimated noise=723.732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188596 Jy ! Component: 100 - total flux cleaned = 0.00023639 Jy ! Component: 150 - total flux cleaned = 0.00029553 Jy ! Component: 200 - total flux cleaned = 0.000311206 Jy ! Total flux subtracted in 200 components = 0.000311206 Jy ! Clean residual min=-0.001734 max=0.001670 Jy/beam ! Clean residual mean=-0.000002 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0612011 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.0612011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092899Jy sigma=0.000677 ! Fit after self-cal, rms=0.093313Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093313Jy sigma=0.000674 ! Fit after self-cal, rms=0.095897Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=17.64 mas, bpa=-20.31 degrees ! Estimated noise=728.166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217611 Jy ! Component: 100 - total flux cleaned = 0.000257255 Jy ! Component: 150 - total flux cleaned = 0.000291449 Jy ! Component: 200 - total flux cleaned = 0.000307113 Jy ! Total flux subtracted in 200 components = 0.000307113 Jy ! Clean residual min=-0.001838 max=0.001799 Jy/beam ! Clean residual mean=-0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0615082 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.0615082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095889Jy sigma=0.000674 ! Fit after self-cal, rms=0.096399Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.96877e-05 Jy ! Component: 100 - total flux cleaned = 0.00016429 Jy ! Component: 150 - total flux cleaned = 0.000201648 Jy ! Component: 200 - total flux cleaned = 0.000200864 Jy ! Total flux subtracted in 200 components = 0.000200864 Jy ! Clean residual min=-0.001916 max=0.001901 Jy/beam ! Clean residual mean=-0.000008 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0617091 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.0617091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096389Jy sigma=0.000673 ! Fit after self-cal, rms=0.096410Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096410Jy sigma=0.000673 ! Fit after self-cal, rms=0.098407Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=17.55 mas, bpa=-20.29 degrees ! Estimated noise=732.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250134 Jy ! Component: 100 - total flux cleaned = 0.000250707 Jy ! Component: 150 - total flux cleaned = 0.000267569 Jy ! Component: 200 - total flux cleaned = 0.000267294 Jy ! Total flux subtracted in 200 components = 0.000267294 Jy ! Clean residual min=-0.001713 max=0.001736 Jy/beam ! Clean residual mean=-0.000005 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0619763 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.0619764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098401Jy sigma=0.000672 ! Fit after self-cal, rms=0.098736Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.46436e-05 Jy ! Component: 100 - total flux cleaned = 8.66267e-05 Jy ! Component: 150 - total flux cleaned = 8.64368e-05 Jy ! Component: 200 - total flux cleaned = 8.67398e-05 Jy ! Total flux subtracted in 200 components = 8.67398e-05 Jy ! Clean residual min=-0.001642 max=0.001643 Jy/beam ! Clean residual mean=-0.000008 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0620631 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.0620631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098729Jy sigma=0.000672 ! Fit after self-cal, rms=0.098745Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098745Jy sigma=0.000672 ! Fit after self-cal, rms=0.100392Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.398 mas, bmaj=28.76 mas, bpa=-8.742 degrees ! Estimated noise=873.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118956 Jy ! Component: 100 - total flux cleaned = 0.000165666 Jy ! Component: 150 - total flux cleaned = 0.000194261 Jy ! Component: 200 - total flux cleaned = 0.000194927 Jy ! Total flux subtracted in 200 components = 0.000194927 Jy ! Clean residual min=-0.001720 max=0.001675 Jy/beam ! Clean residual mean=-0.000009 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.062258 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 99 components and 0.062258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100390Jy sigma=0.000672 ! Fit after self-cal, rms=0.100590Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.76375e-05 Jy ! Component: 100 - total flux cleaned = -9.69648e-06 Jy ! Component: 150 - total flux cleaned = 6.58198e-06 Jy ! Component: 200 - total flux cleaned = 6.51337e-06 Jy ! Total flux subtracted in 200 components = 6.51337e-06 Jy ! Clean residual min=-0.001764 max=0.001447 Jy/beam ! Clean residual mean=-0.000011 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0622645 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 0.0622645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100588Jy sigma=0.000671 ! Fit after self-cal, rms=0.100590Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=17.52 mas, bpa=-20.26 degrees ! Estimated noise=735.417 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 17.52 at -20.26 degrees (North through East) ! Clean map min=-0.0019967 max=0.053939 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=14.33 mas, bpa=-20.03 degrees ! Estimated noise=1309.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425255 Jy ! Component: 100 - total flux cleaned = 0.0523455 Jy ! Component: 150 - total flux cleaned = 0.056469 Jy ! Component: 200 - total flux cleaned = 0.0591759 Jy ! Total flux subtracted in 200 components = 0.0591759 Jy ! Clean residual min=-0.003670 max=0.003468 Jy/beam ! Clean residual mean=-0.000004 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.0591759 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0591759 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=17.52 mas, bpa=-20.26 degrees ! Estimated noise=735.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208588 Jy ! Component: 100 - total flux cleaned = 0.00243314 Jy ! Component: 150 - total flux cleaned = 0.00266775 Jy ! Component: 200 - total flux cleaned = 0.00286135 Jy ! Total flux subtracted in 200 components = 0.00286135 Jy ! Clean residual min=-0.001655 max=0.001740 Jy/beam ! Clean residual mean=-0.000008 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0620372 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.0620372 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.398 mas, bmaj=28.76 mas, bpa=-8.742 degrees ! Estimated noise=873.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213382 Jy ! Component: 100 - total flux cleaned = 0.000272226 Jy ! Component: 150 - total flux cleaned = 0.000271639 Jy ! Component: 200 - total flux cleaned = 0.0002718 Jy ! Total flux subtracted in 200 components = 0.0002718 Jy ! Clean residual min=-0.001715 max=0.001464 Jy/beam ! Clean residual mean=-0.000011 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.062309 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.45469e-07 Jy ! Component: 100 - total flux cleaned = -1.03381e-05 Jy ! Component: 150 - total flux cleaned = -2.05093e-05 Jy ! Component: 200 - total flux cleaned = -3.00923e-05 Jy ! Total flux subtracted in 200 components = -3.00923e-05 Jy ! Clean residual min=-0.001719 max=0.001459 Jy/beam ! Clean residual mean=-0.000011 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0622789 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.0622789 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=17.52 mas, bpa=-20.26 degrees ! Estimated noise=735.417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.05308e-05 Jy ! Component: 100 - total flux cleaned = -8.36458e-05 Jy ! Component: 150 - total flux cleaned = -8.3614e-05 Jy ! Component: 200 - total flux cleaned = -9.89434e-05 Jy ! Total flux subtracted in 200 components = -9.89434e-05 Jy ! Clean residual min=-0.001639 max=0.001670 Jy/beam ! Clean residual mean=-0.000008 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.06218 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.06218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100591Jy sigma=0.000671 ! Fit after self-cal, rms=0.100608Jy sigma=0.000671 wmodel J1033-2536_S_2017_10_21_pus_map.mod ! Writing 63 model components to file: J1033-2536_S_2017_10_21_pus_map.mod wobs J1033-2536_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1033-2536_S_2017_10_21_pus_uvs.fits wwins J1033-2536_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1033-2536_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.7028e-05 Jy ! Component: 100 - total flux cleaned = -1.09438e-05 Jy ! Component: 150 - total flux cleaned = 9.69639e-05 Jy ! Component: 200 - total flux cleaned = 0.000250207 Jy ! Component: 250 - total flux cleaned = 0.000323663 Jy ! Component: 300 - total flux cleaned = 0.000300487 Jy ! Component: 350 - total flux cleaned = 0.000255039 Jy ! Component: 400 - total flux cleaned = 0.000255582 Jy ! Component: 450 - total flux cleaned = 0.000212743 Jy ! Component: 500 - total flux cleaned = 0.000213097 Jy ! Component: 550 - total flux cleaned = 0.000233604 Jy ! Component: 600 - total flux cleaned = 0.000193061 Jy ! Component: 650 - total flux cleaned = 0.000153295 Jy ! Component: 700 - total flux cleaned = 7.62379e-05 Jy ! Component: 750 - total flux cleaned = 7.63872e-05 Jy ! Component: 800 - total flux cleaned = 2.07624e-05 Jy ! Component: 850 - total flux cleaned = -5.23506e-05 Jy ! Component: 900 - total flux cleaned = -8.82123e-05 Jy ! Component: 950 - total flux cleaned = -0.000123458 Jy ! Component: 1000 - total flux cleaned = -0.000141078 Jy ! Component: 1050 - total flux cleaned = -0.000191911 Jy ! Component: 1100 - total flux cleaned = -0.000175418 Jy ! Component: 1150 - total flux cleaned = -0.000175163 Jy ! Component: 1200 - total flux cleaned = -7.73197e-05 Jy ! Component: 1250 - total flux cleaned = -9.33328e-05 Jy ! Component: 1300 - total flux cleaned = -4.55027e-05 Jy ! Component: 1350 - total flux cleaned = 3.272e-05 Jy ! Component: 1400 - total flux cleaned = 0.000109671 Jy ! Component: 1450 - total flux cleaned = 0.000124721 Jy ! Component: 1500 - total flux cleaned = 0.000139768 Jy ! Component: 1550 - total flux cleaned = 0.000169351 Jy ! Component: 1600 - total flux cleaned = 0.000198761 Jy ! Component: 1650 - total flux cleaned = 0.000213221 Jy ! Component: 1700 - total flux cleaned = 0.000256277 Jy ! Component: 1750 - total flux cleaned = 0.000313041 Jy ! Component: 1800 - total flux cleaned = 0.000312795 Jy ! Component: 1850 - total flux cleaned = 0.000340682 Jy ! Component: 1900 - total flux cleaned = 0.000354537 Jy ! Component: 1950 - total flux cleaned = 0.000381968 Jy ! Component: 2000 - total flux cleaned = 0.000368532 Jy ! Component: 2050 - total flux cleaned = 0.000408953 Jy ! Component: 2100 - total flux cleaned = 0.000422282 Jy ! Component: 2150 - total flux cleaned = 0.000396025 Jy ! Component: 2200 - total flux cleaned = 0.000461251 Jy ! Component: 2250 - total flux cleaned = 0.000474137 Jy ! Component: 2300 - total flux cleaned = 0.000474095 Jy ! Component: 2350 - total flux cleaned = 0.000486722 Jy ! Component: 2400 - total flux cleaned = 0.000449228 Jy ! Component: 2450 - total flux cleaned = 0.000499106 Jy ! Component: 2500 - total flux cleaned = 0.000511198 Jy ! Component: 2550 - total flux cleaned = 0.000511074 Jy ! Component: 2600 - total flux cleaned = 0.000498967 Jy ! Component: 2650 - total flux cleaned = 0.0004505 Jy ! Component: 2700 - total flux cleaned = 0.000462505 Jy ! Component: 2750 - total flux cleaned = 0.000426917 Jy ! Component: 2800 - total flux cleaned = 0.000415309 Jy ! Component: 2850 - total flux cleaned = 0.000427018 Jy ! Component: 2900 - total flux cleaned = 0.00038056 Jy ! Component: 2950 - total flux cleaned = 0.000357362 Jy ! Component: 3000 - total flux cleaned = 0.000300141 Jy ! Component: 3050 - total flux cleaned = 0.000311517 Jy ! Component: 3100 - total flux cleaned = 0.000255198 Jy ! Component: 3150 - total flux cleaned = 0.00028866 Jy ! Component: 3200 - total flux cleaned = 0.000210945 Jy ! Component: 3250 - total flux cleaned = 0.000189153 Jy ! Component: 3300 - total flux cleaned = 0.000200164 Jy ! Component: 3350 - total flux cleaned = 0.000113231 Jy ! Component: 3400 - total flux cleaned = 0.000113281 Jy ! Component: 3450 - total flux cleaned = 0.000113221 Jy ! Component: 3500 - total flux cleaned = 5.98911e-05 Jy ! Component: 3550 - total flux cleaned = 6.94875e-06 Jy ! Component: 3600 - total flux cleaned = -2.45796e-05 Jy ! Component: 3650 - total flux cleaned = -4.54334e-05 Jy ! Component: 3700 - total flux cleaned = -3.50936e-05 Jy ! Component: 3750 - total flux cleaned = -0.000107512 Jy ! Component: 3800 - total flux cleaned = -0.000148586 Jy ! Component: 3850 - total flux cleaned = -0.000169077 Jy ! Component: 3900 - total flux cleaned = -0.000199532 Jy ! Component: 3950 - total flux cleaned = -0.000270046 Jy ! Component: 4000 - total flux cleaned = -0.000310245 Jy ! Component: 4050 - total flux cleaned = -0.000350222 Jy ! Total flux subtracted in 4096 components = -0.000399893 Jy ! Clean residual min=-0.000568 max=0.000513 Jy/beam ! Clean residual mean=-0.000002 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.0617801 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 331 components and 0.0617801 Jy ![Exited script file: muppet] wmap "J1033-2536_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 17.52 at -20.26 degrees (North through East) ! Clean map min=-0.0015782 max=0.053274 Jy/beam ! Writing clean map to FITS file: J1033-2536_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0532737 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182388 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.02708 1.02708 2.05415 4.10831 8.21662 16.4332 32.8665 65.733 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 17.52 at -20.26 degrees (North through East) ! Clean map min=-0.0015782 max=0.053274 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033-2536_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:56:15 2019