! Started logfile: J1033-2536_S_2017_08_05_pus_uvs.log on Thu May 9 19:27:16 2019 obs J1033-2536_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1033-2536_S_2017_08_05_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.754783 visibilities/baseline/integration-bin. ! Found source: J1033-2536 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 15624 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033-2536_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 766 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003218Jy sigma=0.006916 ! Fit after self-cal, rms=0.952693Jy sigma=0.006582 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.422 mas, bmaj=6.874 mas, bpa=-8.53 degrees ! Estimated noise=1628.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412849 Jy ! Component: 100 - total flux cleaned = 0.0504175 Jy ! Total flux subtracted in 100 components = 0.0504175 Jy ! Clean residual min=-0.004631 max=0.004293 Jy/beam ! Clean residual mean=0.000004 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.0504175 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0504175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099247Jy sigma=0.000628 ! Fit after self-cal, rms=0.097786Jy sigma=0.000619 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.939 mas, bpa=-8.251 degrees ! Estimated noise=982.309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362757 Jy ! Component: 100 - total flux cleaned = 0.00478467 Jy ! Component: 150 - total flux cleaned = 0.0048828 Jy ! Component: 200 - total flux cleaned = 0.00488168 Jy ! Total flux subtracted in 200 components = 0.00488168 Jy ! Clean residual min=-0.003045 max=0.002780 Jy/beam ! Clean residual mean=0.000005 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.0552991 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.0552991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097622Jy sigma=0.000618 ! Fit after self-cal, rms=0.097570Jy sigma=0.000618 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.87 KP 1.00 ! LA 1.03 MK 1.08 NL 0.93 OV 1.09 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.86 KP 0.97 ! LA 1.03 MK 0.98 NL 1.01 OV 1.14 ! PT 1.09 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.85 KP 0.83 ! LA 0.87 MK 1.08 NL 1.07 OV 1.08 ! PT 1.05 SC 0.95 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.71 KP 1.00* ! LA 1.00* MK 0.85 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.097570Jy sigma=0.000618 ! Fit after self-cal, rms=0.093608Jy sigma=0.000616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=8.016 mas, bpa=-8.624 degrees ! Estimated noise=977.356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110995 Jy ! Component: 100 - total flux cleaned = 0.00024325 Jy ! Component: 150 - total flux cleaned = 0.000267771 Jy ! Component: 200 - total flux cleaned = 0.00029045 Jy ! Total flux subtracted in 200 components = 0.00029045 Jy ! Clean residual min=-0.002199 max=0.002633 Jy/beam ! Clean residual mean=0.000007 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0555896 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 19 components and 0.0555896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093593Jy sigma=0.000616 ! Fit after self-cal, rms=0.093423Jy sigma=0.000616 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093423Jy sigma=0.000616 ! Fit after self-cal, rms=0.093169Jy sigma=0.000615 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=8.027 mas, bpa=-8.814 degrees ! Estimated noise=977.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282106 Jy ! Component: 100 - total flux cleaned = 0.000319491 Jy ! Component: 150 - total flux cleaned = 0.000352575 Jy ! Component: 200 - total flux cleaned = 0.000383276 Jy ! Total flux subtracted in 200 components = 0.000383276 Jy ! Clean residual min=-0.002095 max=0.002508 Jy/beam ! Clean residual mean=0.000004 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0559729 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 20 components and 0.0559729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093161Jy sigma=0.000615 ! Fit after self-cal, rms=0.093121Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (56, 111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151223 Jy ! Component: 100 - total flux cleaned = 0.00165665 Jy ! Component: 150 - total flux cleaned = 0.00184393 Jy ! Component: 200 - total flux cleaned = 0.00190454 Jy ! Total flux subtracted in 200 components = 0.00190454 Jy ! Clean residual min=-0.002014 max=0.002008 Jy/beam ! Clean residual mean=0.000004 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0578774 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.0578774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093056Jy sigma=0.000614 ! Fit after self-cal, rms=0.093017Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093017Jy sigma=0.000614 ! Fit after self-cal, rms=0.092650Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=7.982 mas, bpa=-8.912 degrees ! Estimated noise=971.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012161 Jy ! Component: 100 - total flux cleaned = 0.00129303 Jy ! Component: 150 - total flux cleaned = 0.00138385 Jy ! Component: 200 - total flux cleaned = 0.00141099 Jy ! Total flux subtracted in 200 components = 0.00141099 Jy ! Clean residual min=-0.001923 max=0.001923 Jy/beam ! Clean residual mean=0.000002 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0592884 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.0592884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092609Jy sigma=0.000614 ! Fit after self-cal, rms=0.092604Jy sigma=0.000613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000911189 Jy ! Component: 100 - total flux cleaned = 0.00101121 Jy ! Component: 150 - total flux cleaned = 0.00106459 Jy ! Component: 200 - total flux cleaned = 0.00108764 Jy ! Total flux subtracted in 200 components = 0.00108764 Jy ! Clean residual min=-0.002032 max=0.001878 Jy/beam ! Clean residual mean=0.000003 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.060376 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.060376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092576Jy sigma=0.000613 ! Fit after self-cal, rms=0.092555Jy sigma=0.000613 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092555Jy sigma=0.000613 ! Fit after self-cal, rms=0.092510Jy sigma=0.000613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.067 mas, bmaj=18.22 mas, bpa=-4.734 degrees ! Estimated noise=1304.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000617914 Jy ! Component: 100 - total flux cleaned = 0.000710204 Jy ! Component: 150 - total flux cleaned = 0.000759193 Jy ! Component: 200 - total flux cleaned = 0.000758214 Jy ! Total flux subtracted in 200 components = 0.000758214 Jy ! Clean residual min=-0.002157 max=0.002051 Jy/beam ! Clean residual mean=0.000003 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0611342 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.0611342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092497Jy sigma=0.000613 ! Fit after self-cal, rms=0.092490Jy sigma=0.000613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271863 Jy ! Component: 100 - total flux cleaned = 0.00024758 Jy ! Component: 150 - total flux cleaned = 0.00022789 Jy ! Component: 200 - total flux cleaned = 0.000210108 Jy ! Total flux subtracted in 200 components = 0.000210108 Jy ! Clean residual min=-0.002216 max=0.002052 Jy/beam ! Clean residual mean=0.000004 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0613443 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.0613443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092481Jy sigma=0.000613 ! Fit after self-cal, rms=0.092480Jy sigma=0.000613 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.955 mas, bpa=-8.876 degrees ! Estimated noise=970.005 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.852 x 7.955 at -8.876 degrees (North through East) ! Clean map min=-0.0033131 max=0.053736 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.393 mas, bmaj=6.927 mas, bpa=-9.792 degrees ! Estimated noise=1563.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414446 Jy ! Component: 100 - total flux cleaned = 0.0518661 Jy ! Component: 150 - total flux cleaned = 0.0562096 Jy ! Component: 200 - total flux cleaned = 0.0578465 Jy ! Total flux subtracted in 200 components = 0.0578465 Jy ! Clean residual min=-0.003518 max=0.003092 Jy/beam ! Clean residual mean=0.000002 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0578465 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0578465 Jy ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.955 mas, bpa=-8.876 degrees ! Estimated noise=970.005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116246 Jy ! Component: 100 - total flux cleaned = 0.00191286 Jy ! Component: 150 - total flux cleaned = 0.00251556 Jy ! Component: 200 - total flux cleaned = 0.00276919 Jy ! Total flux subtracted in 200 components = 0.00276919 Jy ! Clean residual min=-0.002091 max=0.002246 Jy/beam ! Clean residual mean=0.000001 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0606157 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.0606157 Jy ! Inverting map ! Added new window around map position (36, -59). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015175 Jy ! Component: 100 - total flux cleaned = 0.00134834 Jy ! Component: 150 - total flux cleaned = 0.00134726 Jy ! Component: 200 - total flux cleaned = 0.00130958 Jy ! Total flux subtracted in 200 components = 0.00130958 Jy ! Clean residual min=-0.002012 max=0.001773 Jy/beam ! Clean residual mean=0.000002 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0619253 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.0619253 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.067 mas, bmaj=18.22 mas, bpa=-4.734 degrees ! Estimated noise=1304.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403655 Jy ! Component: 100 - total flux cleaned = 0.000460037 Jy ! Component: 150 - total flux cleaned = 0.000461633 Jy ! Component: 200 - total flux cleaned = 0.000419753 Jy ! Total flux subtracted in 200 components = 0.000419753 Jy ! Clean residual min=-0.002133 max=0.001978 Jy/beam ! Clean residual mean=0.000005 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.062345 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.69689e-05 Jy ! Component: 100 - total flux cleaned = -0.000109104 Jy ! Component: 150 - total flux cleaned = -0.000140453 Jy ! Component: 200 - total flux cleaned = -0.000184453 Jy ! Total flux subtracted in 200 components = -0.000184453 Jy ! Clean residual min=-0.002077 max=0.001934 Jy/beam ! Clean residual mean=0.000005 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0621606 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.0621606 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.955 mas, bpa=-8.876 degrees ! Estimated noise=970.005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.40734e-05 Jy ! Component: 100 - total flux cleaned = 5.43069e-05 Jy ! Component: 150 - total flux cleaned = 5.57803e-05 Jy ! Component: 200 - total flux cleaned = 3.06013e-05 Jy ! Total flux subtracted in 200 components = 3.06013e-05 Jy ! Clean residual min=-0.001956 max=0.001817 Jy/beam ! Clean residual mean=0.000002 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0621912 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.0621912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092446Jy sigma=0.000613 ! Fit after self-cal, rms=0.092410Jy sigma=0.000612 wmodel J1033-2536_S_2017_08_05_pus_map.mod ! Writing 90 model components to file: J1033-2536_S_2017_08_05_pus_map.mod wobs J1033-2536_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1033-2536_S_2017_08_05_pus_uvs.fits wwins J1033-2536_S_2017_08_05_pus_map.win ! wwins: Wrote 3 windows to J1033-2536_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00021185 Jy ! Component: 100 - total flux cleaned = -0.000147884 Jy ! Component: 150 - total flux cleaned = -8.77131e-05 Jy ! Component: 200 - total flux cleaned = -8.84333e-05 Jy ! Component: 250 - total flux cleaned = -4.46116e-06 Jy ! Component: 300 - total flux cleaned = 5.0514e-05 Jy ! Component: 350 - total flux cleaned = 0.000156887 Jy ! Component: 400 - total flux cleaned = 0.000337385 Jy ! Component: 450 - total flux cleaned = 0.000437893 Jy ! Component: 500 - total flux cleaned = 0.000610767 Jy ! Component: 550 - total flux cleaned = 0.000851406 Jy ! Component: 600 - total flux cleaned = 0.000968914 Jy ! Component: 650 - total flux cleaned = 0.0011071 Jy ! Component: 700 - total flux cleaned = 0.00117536 Jy ! Component: 750 - total flux cleaned = 0.00130846 Jy ! Component: 800 - total flux cleaned = 0.00139538 Jy ! Component: 850 - total flux cleaned = 0.0015025 Jy ! Component: 900 - total flux cleaned = 0.0016076 Jy ! Component: 950 - total flux cleaned = 0.00169057 Jy ! Component: 1000 - total flux cleaned = 0.00179154 Jy ! Component: 1050 - total flux cleaned = 0.00187103 Jy ! Component: 1100 - total flux cleaned = 0.00194922 Jy ! Component: 1150 - total flux cleaned = 0.00206471 Jy ! Component: 1200 - total flux cleaned = 0.00212117 Jy ! Component: 1250 - total flux cleaned = 0.00221449 Jy ! Component: 1300 - total flux cleaned = 0.00232494 Jy ! Component: 1350 - total flux cleaned = 0.00241553 Jy ! Component: 1400 - total flux cleaned = 0.00248697 Jy ! Component: 1450 - total flux cleaned = 0.00255769 Jy ! Component: 1500 - total flux cleaned = 0.00262723 Jy ! Component: 1550 - total flux cleaned = 0.00262748 Jy ! Component: 1600 - total flux cleaned = 0.00271263 Jy ! Component: 1650 - total flux cleaned = 0.00274627 Jy ! Component: 1700 - total flux cleaned = 0.00281245 Jy ! Component: 1750 - total flux cleaned = 0.00281223 Jy ! Component: 1800 - total flux cleaned = 0.0028445 Jy ! Component: 1850 - total flux cleaned = 0.00284476 Jy ! Component: 1900 - total flux cleaned = 0.00287653 Jy ! Component: 1950 - total flux cleaned = 0.00286089 Jy ! Component: 2000 - total flux cleaned = 0.00284518 Jy ! Component: 2050 - total flux cleaned = 0.00284539 Jy ! Component: 2100 - total flux cleaned = 0.00289108 Jy ! Component: 2150 - total flux cleaned = 0.00290622 Jy ! Component: 2200 - total flux cleaned = 0.00287632 Jy ! Component: 2250 - total flux cleaned = 0.00290612 Jy ! Component: 2300 - total flux cleaned = 0.00293542 Jy ! Component: 2350 - total flux cleaned = 0.00295 Jy ! Component: 2400 - total flux cleaned = 0.00297889 Jy ! Component: 2450 - total flux cleaned = 0.00293593 Jy ! Component: 2500 - total flux cleaned = 0.00300698 Jy ! Component: 2550 - total flux cleaned = 0.00300694 Jy ! Component: 2600 - total flux cleaned = 0.00307659 Jy ! Component: 2650 - total flux cleaned = 0.00306247 Jy ! Component: 2700 - total flux cleaned = 0.00304867 Jy ! Component: 2750 - total flux cleaned = 0.00300779 Jy ! Component: 2800 - total flux cleaned = 0.00303485 Jy ! Component: 2850 - total flux cleaned = 0.00300795 Jy ! Component: 2900 - total flux cleaned = 0.00302138 Jy ! Component: 2950 - total flux cleaned = 0.00302124 Jy ! Component: 3000 - total flux cleaned = 0.00299489 Jy ! Component: 3050 - total flux cleaned = 0.0029819 Jy ! Component: 3100 - total flux cleaned = 0.00298202 Jy ! Component: 3150 - total flux cleaned = 0.00300786 Jy ! Component: 3200 - total flux cleaned = 0.00303342 Jy ! Component: 3250 - total flux cleaned = 0.00302071 Jy ! Component: 3300 - total flux cleaned = 0.00305857 Jy ! Component: 3350 - total flux cleaned = 0.00302091 Jy ! Component: 3400 - total flux cleaned = 0.00307079 Jy ! Component: 3450 - total flux cleaned = 0.00305838 Jy ! Component: 3500 - total flux cleaned = 0.00303363 Jy ! Component: 3550 - total flux cleaned = 0.00302145 Jy ! Component: 3600 - total flux cleaned = 0.00304577 Jy ! Component: 3650 - total flux cleaned = 0.00299745 Jy ! Component: 3700 - total flux cleaned = 0.00300964 Jy ! Component: 3750 - total flux cleaned = 0.00306938 Jy ! Component: 3800 - total flux cleaned = 0.00309322 Jy ! Component: 3850 - total flux cleaned = 0.00308129 Jy ! Component: 3900 - total flux cleaned = 0.00306958 Jy ! Component: 3950 - total flux cleaned = 0.00309291 Jy ! Component: 4000 - total flux cleaned = 0.00309289 Jy ! Component: 4050 - total flux cleaned = 0.00308132 Jy ! Total flux subtracted in 4096 components = 0.00308127 Jy ! Clean residual min=-0.000680 max=0.000676 Jy/beam ! Clean residual mean=0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0652725 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 372 components and 0.0652724 Jy ![Exited script file: muppet] wmap "J1033-2536_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.852 x 7.955 at -8.876 degrees (North through East) ! Clean map min=-0.0035901 max=0.053106 Jy/beam ! Writing clean map to FITS file: J1033-2536_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0531062 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200132 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13056 1.13056 2.26111 4.52223 9.04445 18.0889 36.1778 72.3556 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.852 x 7.955 at -8.876 degrees (North through East) ! Clean map min=-0.0035901 max=0.053106 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033-2536_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:27:22 2019