! Started logfile: J1033+6051_X_2017_02_24_pus_uvs.log on Sat May 4 10:01:18 2019 obs J1033+6051_X_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1033+6051_X_2017_02_24_pus_uva.fits ! AN table 1: 151 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970272 visibilities/baseline/integration-bin. ! Found source: J1033+6051 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1882 lines of history. ! ! Reading 79116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1033+6051_X_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.559451Jy sigma=0.004820 ! Fit after self-cal, rms=0.543752Jy sigma=0.004686 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.81 mas, bmaj=0.9633 mas, bpa=8.186 degrees ! Estimated noise=622.099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.350451 Jy ! Component: 100 - total flux cleaned = 0.435757 Jy ! Total flux subtracted in 100 components = 0.435757 Jy ! Clean residual min=-0.010425 max=0.035108 Jy/beam ! Clean residual mean=-0.000069 rms=0.002681 Jy/beam ! Combined flux in latest and established models = 0.435757 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.435757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103134Jy sigma=0.000886 ! Fit after self-cal, rms=0.102737Jy sigma=0.000883 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379177 Jy ! Component: 100 - total flux cleaned = 0.0563519 Jy ! Total flux subtracted in 100 components = 0.0563519 Jy ! Clean residual min=-0.005886 max=0.012769 Jy/beam ! Clean residual mean=-0.000036 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.492109 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.492109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085037Jy sigma=0.000712 ! Fit after self-cal, rms=0.084669Jy sigma=0.000709 ! Inverting map ! Added new window around map position (0, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136364 Jy ! Component: 100 - total flux cleaned = 0.0213904 Jy ! Total flux subtracted in 100 components = 0.0213904 Jy ! Clean residual min=-0.006239 max=0.005659 Jy/beam ! Clean residual mean=-0.000023 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.513499 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.513499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081945Jy sigma=0.000683 ! Fit after self-cal, rms=0.081747Jy sigma=0.000681 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=1.208 mas, bpa=9.81 degrees ! Estimated noise=291.761 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0074281 Jy ! Component: 100 - total flux cleaned = 0.011097 Jy ! Component: 150 - total flux cleaned = 0.0131501 Jy ! Component: 200 - total flux cleaned = 0.0136484 Jy ! Total flux subtracted in 200 components = 0.0136484 Jy ! Clean residual min=-0.004665 max=0.003651 Jy/beam ! Clean residual mean=-0.000037 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.527148 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 0.527148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081143Jy sigma=0.000675 ! Fit after self-cal, rms=0.081082Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 0.99 KP 1.03 ! LA 1.01 MK 0.97 NL 0.96 OV 1.00 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 0.97 KP 1.03 ! LA 1.01 MK 0.97 NL 0.96 OV 1.00 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.97 KP 1.04 ! LA 0.99 MK 0.98 NL 0.96 OV 1.00 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.00 KP 1.03 ! LA 0.99 MK 0.98 NL 0.97 OV 1.01 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.97 KP 1.03 ! LA 0.99 MK 1.00 NL 0.97 OV 1.01 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.99 KP 1.01 ! LA 1.03 MK 0.98 NL 0.96 OV 1.00 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 0.98 KP 1.03 ! LA 0.99 MK 0.99 NL 0.97 OV 1.01 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.99 KP 1.01 ! LA 1.03 MK 0.97 NL 0.98 OV 1.00 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 0.97 KP 1.03 ! LA 0.99 MK 0.97 NL 0.97 OV 1.00 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 0.97 KP 1.02 ! LA 0.99 MK 0.98 NL 0.97 OV 1.01 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.01 KP 1.02 ! LA 0.99 MK 0.98 NL 0.96 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.99 KP 1.07 ! LA 0.99 MK 0.98 NL 0.97 OV 1.02 ! PT 1.00 SC 1.05 ! ! ! Fit before self-cal, rms=0.081082Jy sigma=0.000675 ! Fit after self-cal, rms=0.079190Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.044 mas, bmaj=1.208 mas, bpa=8.583 degrees ! Estimated noise=291.511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376531 Jy ! Component: 100 - total flux cleaned = 0.00493365 Jy ! Component: 150 - total flux cleaned = 0.00558628 Jy ! Component: 200 - total flux cleaned = 0.00586928 Jy ! Total flux subtracted in 200 components = 0.00586928 Jy ! Clean residual min=-0.001662 max=0.002155 Jy/beam ! Clean residual mean=-0.000006 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.533017 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 54 components and 0.533017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078962Jy sigma=0.000655 ! Fit after self-cal, rms=0.078942Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078942Jy sigma=0.000655 ! Fit after self-cal, rms=0.078624Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.043 mas, bmaj=1.206 mas, bpa=9.502 degrees ! Estimated noise=291.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163705 Jy ! Component: 100 - total flux cleaned = 0.00205018 Jy ! Component: 150 - total flux cleaned = 0.00236068 Jy ! Component: 200 - total flux cleaned = 0.00243584 Jy ! Total flux subtracted in 200 components = 0.00243584 Jy ! Clean residual min=-0.000936 max=0.001757 Jy/beam ! Clean residual mean=-0.000008 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.535453 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.535453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078584Jy sigma=0.000651 ! Fit after self-cal, rms=0.078581Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125994 Jy ! Component: 100 - total flux cleaned = 0.0017299 Jy ! Component: 150 - total flux cleaned = 0.00202045 Jy ! Component: 200 - total flux cleaned = 0.00221651 Jy ! Total flux subtracted in 200 components = 0.00221651 Jy ! Clean residual min=-0.000959 max=0.001016 Jy/beam ! Clean residual mean=-0.000005 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.537669 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.537669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078547Jy sigma=0.000650 ! Fit after self-cal, rms=0.078544Jy sigma=0.000650 ! Inverting map ! Added new window around map position (-0.2, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000883523 Jy ! Component: 100 - total flux cleaned = 0.00120542 Jy ! Component: 150 - total flux cleaned = 0.00137875 Jy ! Component: 200 - total flux cleaned = 0.00145396 Jy ! Total flux subtracted in 200 components = 0.00145396 Jy ! Clean residual min=-0.000917 max=0.000897 Jy/beam ! Clean residual mean=-0.000003 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.539123 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.539123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078526Jy sigma=0.000650 ! Fit after self-cal, rms=0.078524Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078524Jy sigma=0.000650 ! Fit after self-cal, rms=0.078505Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.043 mas, bmaj=1.205 mas, bpa=9.467 degrees ! Estimated noise=291.163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568189 Jy ! Component: 100 - total flux cleaned = 0.000748945 Jy ! Component: 150 - total flux cleaned = 0.000851198 Jy ! Component: 200 - total flux cleaned = 0.000913208 Jy ! Total flux subtracted in 200 components = 0.000913208 Jy ! Clean residual min=-0.000823 max=0.000873 Jy/beam ! Clean residual mean=-0.000004 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.540037 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.540037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078496Jy sigma=0.000650 ! Fit after self-cal, rms=0.078495Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000584983 Jy ! Component: 100 - total flux cleaned = 0.000713453 Jy ! Component: 150 - total flux cleaned = 0.000744371 Jy ! Component: 200 - total flux cleaned = 0.00078755 Jy ! Total flux subtracted in 200 components = 0.00078755 Jy ! Clean residual min=-0.000805 max=0.000720 Jy/beam ! Clean residual mean=-0.000003 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.540824 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 105 components and 0.540824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078485Jy sigma=0.000650 ! Fit after self-cal, rms=0.078484Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078484Jy sigma=0.000650 ! Fit after self-cal, rms=0.078492Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.306 mas, bmaj=2.466 mas, bpa=57.79 degrees ! Estimated noise=374.492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483319 Jy ! Component: 100 - total flux cleaned = 0.00073109 Jy ! Component: 150 - total flux cleaned = 0.000882227 Jy ! Component: 200 - total flux cleaned = 0.000968108 Jy ! Total flux subtracted in 200 components = 0.000968108 Jy ! Clean residual min=-0.000787 max=0.000825 Jy/beam ! Clean residual mean=-0.000006 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.541792 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 0.541792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078491Jy sigma=0.000650 ! Fit after self-cal, rms=0.078491Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.54028e-05 Jy ! Component: 100 - total flux cleaned = 0.000164181 Jy ! Component: 150 - total flux cleaned = 0.000231387 Jy ! Component: 200 - total flux cleaned = 0.000267522 Jy ! Total flux subtracted in 200 components = 0.000267522 Jy ! Clean residual min=-0.000796 max=0.000819 Jy/beam ! Clean residual mean=-0.000005 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.54206 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 132 components and 0.54206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078490Jy sigma=0.000650 ! Fit after self-cal, rms=0.078490Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.043 mas, bmaj=1.205 mas, bpa=9.49 degrees ! Estimated noise=291.202 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.043 x 1.205 at 9.49 degrees (North through East) ! Clean map min=-0.00065452 max=0.45603 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8125 mas, bmaj=0.9612 mas, bpa=7.777 degrees ! Estimated noise=621.168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.349428 Jy ! Component: 100 - total flux cleaned = 0.4386 Jy ! Component: 150 - total flux cleaned = 0.477677 Jy ! Component: 200 - total flux cleaned = 0.496868 Jy ! Total flux subtracted in 200 components = 0.496868 Jy ! Clean residual min=-0.003353 max=0.009217 Jy/beam ! Clean residual mean=-0.000030 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.496868 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.496868 Jy ! Inverting map and beam ! Estimated beam: bmin=1.043 mas, bmaj=1.205 mas, bpa=9.49 degrees ! Estimated noise=291.202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150751 Jy ! Component: 100 - total flux cleaned = 0.0230464 Jy ! Component: 150 - total flux cleaned = 0.028118 Jy ! Component: 200 - total flux cleaned = 0.0315968 Jy ! Total flux subtracted in 200 components = 0.0315968 Jy ! Clean residual min=-0.001195 max=0.001959 Jy/beam ! Clean residual mean=-0.000023 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.528465 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 43 components and 0.528465 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256349 Jy ! Component: 100 - total flux cleaned = 0.00450435 Jy ! Component: 150 - total flux cleaned = 0.00603139 Jy ! Component: 200 - total flux cleaned = 0.00728531 Jy ! Total flux subtracted in 200 components = 0.00728531 Jy ! Clean residual min=-0.000859 max=0.000987 Jy/beam ! Clean residual mean=-0.000011 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.53575 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 65 components and 0.535751 Jy ! Inverting map ! Added new window around map position (0, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112094 Jy ! Component: 100 - total flux cleaned = 0.00205447 Jy ! Component: 150 - total flux cleaned = 0.00280242 Jy ! Component: 200 - total flux cleaned = 0.00337763 Jy ! Total flux subtracted in 200 components = 0.00337763 Jy ! Clean residual min=-0.000765 max=0.000724 Jy/beam ! Clean residual mean=-0.000006 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.539128 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 85 components and 0.539128 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.306 mas, bmaj=2.466 mas, bpa=57.79 degrees ! Estimated noise=374.492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085572 Jy ! Component: 100 - total flux cleaned = 0.00142623 Jy ! Component: 150 - total flux cleaned = 0.00184668 Jy ! Component: 200 - total flux cleaned = 0.0021752 Jy ! Total flux subtracted in 200 components = 0.0021752 Jy ! Clean residual min=-0.000788 max=0.000886 Jy/beam ! Clean residual mean=-0.000007 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.541304 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256176 Jy ! Component: 100 - total flux cleaned = 0.000347595 Jy ! Component: 150 - total flux cleaned = 0.000397113 Jy ! Component: 200 - total flux cleaned = 0.000450217 Jy ! Total flux subtracted in 200 components = 0.000450217 Jy ! Clean residual min=-0.000766 max=0.000871 Jy/beam ! Clean residual mean=-0.000006 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.541754 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 133 components and 0.541754 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.043 mas, bmaj=1.205 mas, bpa=9.49 degrees ! Estimated noise=291.202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257362 Jy ! Component: 100 - total flux cleaned = -0.000340237 Jy ! Component: 150 - total flux cleaned = -0.00039765 Jy ! Component: 200 - total flux cleaned = -0.000415705 Jy ! Total flux subtracted in 200 components = -0.000415705 Jy ! Clean residual min=-0.000698 max=0.000746 Jy/beam ! Clean residual mean=-0.000003 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.541338 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 148 components and 0.541338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078505Jy sigma=0.000650 ! Fit after self-cal, rms=0.078500Jy sigma=0.000650 wmodel J1033+6051_X_2017_02_24_pus_map.mod ! Writing 148 model components to file: J1033+6051_X_2017_02_24_pus_map.mod wobs J1033+6051_X_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1033+6051_X_2017_02_24_pus_uvs.fits wwins J1033+6051_X_2017_02_24_pus_map.win ! wwins: Wrote 7 windows to J1033+6051_X_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166386 Jy ! Component: 100 - total flux cleaned = 0.000192074 Jy ! Component: 150 - total flux cleaned = 0.000253049 Jy ! Component: 200 - total flux cleaned = 0.000323212 Jy ! Component: 250 - total flux cleaned = 0.000368888 Jy ! Component: 300 - total flux cleaned = 0.000436052 Jy ! Component: 350 - total flux cleaned = 0.000502028 Jy ! Component: 400 - total flux cleaned = 0.000566781 Jy ! Component: 450 - total flux cleaned = 0.000640788 Jy ! Component: 500 - total flux cleaned = 0.000651182 Jy ! Component: 550 - total flux cleaned = 0.000681904 Jy ! Component: 600 - total flux cleaned = 0.000722159 Jy ! Component: 650 - total flux cleaned = 0.000721945 Jy ! Component: 700 - total flux cleaned = 0.000780954 Jy ! Component: 750 - total flux cleaned = 0.000809936 Jy ! Component: 800 - total flux cleaned = 0.000848166 Jy ! Component: 850 - total flux cleaned = 0.000866859 Jy ! Component: 900 - total flux cleaned = 0.000876194 Jy ! Component: 950 - total flux cleaned = 0.000894886 Jy ! Component: 1000 - total flux cleaned = 0.000959131 Jy ! Component: 1050 - total flux cleaned = 0.000986341 Jy ! Component: 1100 - total flux cleaned = 0.00101328 Jy ! Component: 1150 - total flux cleaned = 0.00105775 Jy ! Component: 1200 - total flux cleaned = 0.00107514 Jy ! Component: 1250 - total flux cleaned = 0.00110119 Jy ! Component: 1300 - total flux cleaned = 0.00109247 Jy ! Component: 1350 - total flux cleaned = 0.0011438 Jy ! Component: 1400 - total flux cleaned = 0.00110994 Jy ! Component: 1450 - total flux cleaned = 0.00118572 Jy ! Component: 1500 - total flux cleaned = 0.00119399 Jy ! Component: 1550 - total flux cleaned = 0.0011941 Jy ! Component: 1600 - total flux cleaned = 0.00125163 Jy ! Component: 1650 - total flux cleaned = 0.00125969 Jy ! Component: 1700 - total flux cleaned = 0.00126777 Jy ! Component: 1750 - total flux cleaned = 0.00126778 Jy ! Component: 1800 - total flux cleaned = 0.00132356 Jy ! Component: 1850 - total flux cleaned = 0.00136307 Jy ! Component: 1900 - total flux cleaned = 0.00136312 Jy ! Component: 1950 - total flux cleaned = 0.00137869 Jy ! Component: 2000 - total flux cleaned = 0.00143285 Jy ! Total flux subtracted in 2048 components = 0.00147897 Jy ! Clean residual min=-0.000457 max=0.000389 Jy/beam ! Clean residual mean=-0.000001 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.542817 Jy keep ! Adding 166 model components to the UV plane model. ! The established model now contains 313 components and 0.542817 Jy ![Exited script file: muppet] wmap "J1033+6051_X_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.043 x 1.205 at 9.49 degrees (North through East) ! Clean map min=-0.00059142 max=0.45589 Jy/beam ! Writing clean map to FITS file: J1033+6051_X_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.455893 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141244 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0929455 0.0929455 0.185891 0.371782 0.743564 1.48713 2.97426 5.94851 11.897 23.7941 47.5881 95.1762 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.455 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.043 x 1.205 at 9.49 degrees (North through East) ! Clean map min=-0.00059142 max=0.45589 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033+6051_X_2017_02_24_pus_uvs.log closed on Sat May 4 10:01:23 2019