! Started logfile: J1033+4116_S_2017_02_19_pus_uvs.log on Sat May 4 18:48:50 2019 obs J1033+4116_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1033+4116_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.572222 visibilities/baseline/integration-bin. ! Found source: J1033+4116 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033+4116_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.217166Jy sigma=0.001607 ! Fit after self-cal, rms=0.198537Jy sigma=0.001446 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=10.02 mas, bpa=42.73 degrees ! Estimated noise=3833.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.834459 Jy ! Component: 100 - total flux cleaned = 1.01643 Jy ! Total flux subtracted in 100 components = 1.01643 Jy ! Clean residual min=-0.032554 max=0.052249 Jy/beam ! Clean residual mean=-0.000033 rms=0.010382 Jy/beam ! Combined flux in latest and established models = 1.01643 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1.01643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190761Jy sigma=0.001391 ! Fit after self-cal, rms=0.190761Jy sigma=0.001391 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=10.22 mas, bpa=42.92 degrees ! Estimated noise=3205.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579517 Jy ! Component: 100 - total flux cleaned = 0.086542 Jy ! Component: 150 - total flux cleaned = 0.106085 Jy ! Component: 200 - total flux cleaned = 0.120486 Jy ! Total flux subtracted in 200 components = 0.120486 Jy ! Clean residual min=-0.039492 max=0.035729 Jy/beam ! Clean residual mean=0.000001 rms=0.009518 Jy/beam ! Combined flux in latest and established models = 1.13691 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 1.13691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166040Jy sigma=0.001252 ! Fit after self-cal, rms=0.166037Jy sigma=0.001251 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00* KP 1.06 ! LA 1.02 MK 0.98 NL 0.86 OV 1.05 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 1.00* KP 1.01 ! LA 0.98 MK 0.98 NL 0.99 OV 1.08 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.05 HN 1.00* KP 0.90 ! LA 0.76 MK 1.03 NL 1.10 OV 0.98 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.07 HN 1.00* KP 1.00* ! LA 0.84 MK 1.28 NL 1.00* OV 1.04 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.166037Jy sigma=0.001251 ! Fit after self-cal, rms=0.080803Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=10.26 mas, bpa=42.96 degrees ! Estimated noise=3186.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233074 Jy ! Component: 100 - total flux cleaned = -0.00294722 Jy ! Component: 150 - total flux cleaned = -0.00341936 Jy ! Component: 200 - total flux cleaned = -0.00362295 Jy ! Total flux subtracted in 200 components = -0.00362295 Jy ! Clean residual min=-0.010169 max=0.013372 Jy/beam ! Clean residual mean=0.000016 rms=0.003081 Jy/beam ! Combined flux in latest and established models = 1.13329 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 1.13329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080290Jy sigma=0.000668 ! Fit after self-cal, rms=0.080270Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080270Jy sigma=0.000668 ! Fit after self-cal, rms=0.080214Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=10.26 mas, bpa=42.98 degrees ! Estimated noise=3186.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140915 Jy ! Component: 100 - total flux cleaned = -0.00134062 Jy ! Component: 150 - total flux cleaned = -0.0012759 Jy ! Component: 200 - total flux cleaned = -0.00121879 Jy ! Total flux subtracted in 200 components = -0.00121879 Jy ! Clean residual min=-0.009951 max=0.013272 Jy/beam ! Clean residual mean=0.000016 rms=0.002998 Jy/beam ! Combined flux in latest and established models = 1.13207 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 1.13207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080020Jy sigma=0.000666 ! Fit after self-cal, rms=0.080021Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-41, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00999608 Jy ! Component: 100 - total flux cleaned = 0.0135335 Jy ! Component: 150 - total flux cleaned = 0.0160565 Jy ! Component: 200 - total flux cleaned = 0.0178967 Jy ! Total flux subtracted in 200 components = 0.0178967 Jy ! Clean residual min=-0.007612 max=0.006896 Jy/beam ! Clean residual mean=0.000004 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 1.14997 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 109 components and 1.14997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077884Jy sigma=0.000645 ! Fit after self-cal, rms=0.077866Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077866Jy sigma=0.000645 ! Fit after self-cal, rms=0.077634Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=10.26 mas, bpa=43.01 degrees ! Estimated noise=3180.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414604 Jy ! Component: 100 - total flux cleaned = 0.00585921 Jy ! Component: 150 - total flux cleaned = 0.00620086 Jy ! Component: 200 - total flux cleaned = 0.00641094 Jy ! Total flux subtracted in 200 components = 0.00641094 Jy ! Clean residual min=-0.006594 max=0.005459 Jy/beam ! Clean residual mean=0.000004 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 1.15638 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 139 components and 1.15638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077277Jy sigma=0.000641 ! Fit after self-cal, rms=0.077276Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071978 Jy ! Component: 100 - total flux cleaned = 0.00108545 Jy ! Component: 150 - total flux cleaned = 0.00126021 Jy ! Component: 200 - total flux cleaned = 0.00142195 Jy ! Total flux subtracted in 200 components = 0.00142195 Jy ! Clean residual min=-0.006012 max=0.005182 Jy/beam ! Clean residual mean=0.000004 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 1.1578 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 1.1578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077111Jy sigma=0.000639 ! Fit after self-cal, rms=0.077109Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077109Jy sigma=0.000639 ! Fit after self-cal, rms=0.077083Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.129 mas, bmaj=10.27 mas, bpa=46.14 degrees ! Estimated noise=3875.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145725 Jy ! Component: 100 - total flux cleaned = 0.00259893 Jy ! Component: 150 - total flux cleaned = 0.003448 Jy ! Component: 200 - total flux cleaned = 0.00428935 Jy ! Total flux subtracted in 200 components = 0.00428935 Jy ! Clean residual min=-0.005729 max=0.005026 Jy/beam ! Clean residual mean=0.000005 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 1.16209 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 176 components and 1.16209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076994Jy sigma=0.000638 ! Fit after self-cal, rms=0.076986Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695158 Jy ! Component: 100 - total flux cleaned = 0.0012857 Jy ! Component: 150 - total flux cleaned = 0.00182292 Jy ! Component: 200 - total flux cleaned = 0.00210158 Jy ! Total flux subtracted in 200 components = 0.00210158 Jy ! Clean residual min=-0.005180 max=0.004911 Jy/beam ! Clean residual mean=0.000005 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 1.16419 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 196 components and 1.16419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076941Jy sigma=0.000638 ! Fit after self-cal, rms=0.076939Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=10.26 mas, bpa=43.01 degrees ! Estimated noise=3179.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.335 x 10.26 at 43.01 degrees (North through East) ! Clean map min=-0.0055975 max=1.0776 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076939Jy sigma=0.000638 ! Fit after self-cal, rms=0.070841Jy sigma=0.000584 ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=10.25 mas, bpa=43.01 degrees ! Estimated noise=3179.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201167 Jy ! Component: 100 - total flux cleaned = -0.000520585 Jy ! Component: 150 - total flux cleaned = -0.000922604 Jy ! Component: 200 - total flux cleaned = -0.00123265 Jy ! Total flux subtracted in 200 components = -0.00123265 Jy ! Clean residual min=-0.004525 max=0.004683 Jy/beam ! Clean residual mean=0.000004 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 1.16296 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 206 components and 1.16296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070748Jy sigma=0.000583 ! Fit after self-cal, rms=0.070749Jy sigma=0.000583 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000413878 Jy ! Component: 100 - total flux cleaned = -0.000506188 Jy ! Component: 150 - total flux cleaned = -0.000676578 Jy ! Component: 200 - total flux cleaned = -0.000677847 Jy ! Total flux subtracted in 200 components = -0.000677847 Jy ! Clean residual min=-0.004236 max=0.004578 Jy/beam ! Clean residual mean=0.000003 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 1.16228 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 218 components and 1.16228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070704Jy sigma=0.000582 ! Fit after self-cal, rms=0.070704Jy sigma=0.000582 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070704Jy sigma=0.000582 ! Fit after self-cal, rms=0.070687Jy sigma=0.000582 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=10.08 mas, bpa=42.79 degrees ! Estimated noise=3852.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.838464 Jy ! Component: 100 - total flux cleaned = 1.0213 Jy ! Component: 150 - total flux cleaned = 1.06269 Jy ! Component: 200 - total flux cleaned = 1.08188 Jy ! Total flux subtracted in 200 components = 1.08188 Jy ! Clean residual min=-0.012517 max=0.012931 Jy/beam ! Clean residual mean=-0.000024 rms=0.003476 Jy/beam ! Combined flux in latest and established models = 1.08188 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.08188 Jy ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=10.25 mas, bpa=43.01 degrees ! Estimated noise=3178.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158589 Jy ! Component: 100 - total flux cleaned = 0.0232199 Jy ! Component: 150 - total flux cleaned = 0.0304057 Jy ! Component: 200 - total flux cleaned = 0.035803 Jy ! Total flux subtracted in 200 components = 0.035803 Jy ! Clean residual min=-0.007733 max=0.008517 Jy/beam ! Clean residual mean=-0.000016 rms=0.002413 Jy/beam ! Combined flux in latest and established models = 1.11768 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 60 components and 1.11768 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.129 mas, bmaj=10.26 mas, bpa=46.15 degrees ! Estimated noise=3876.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101775 Jy ! Component: 100 - total flux cleaned = 0.0175314 Jy ! Component: 150 - total flux cleaned = 0.0234948 Jy ! Component: 200 - total flux cleaned = 0.0282665 Jy ! Total flux subtracted in 200 components = 0.0282665 Jy ! Clean residual min=-0.006768 max=0.006955 Jy/beam ! Clean residual mean=-0.000012 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 1.14595 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304443 Jy ! Component: 100 - total flux cleaned = 0.00508682 Jy ! Component: 150 - total flux cleaned = 0.0072477 Jy ! Component: 200 - total flux cleaned = 0.00870989 Jy ! Total flux subtracted in 200 components = 0.00870989 Jy ! Clean residual min=-0.005508 max=0.005527 Jy/beam ! Clean residual mean=-0.000004 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 1.15466 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 150 components and 1.15466 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=10.25 mas, bpa=43.01 degrees ! Estimated noise=3178.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030147 Jy ! Component: 100 - total flux cleaned = 0.00445529 Jy ! Component: 150 - total flux cleaned = 0.0056038 Jy ! Component: 200 - total flux cleaned = 0.00618197 Jy ! Total flux subtracted in 200 components = 0.00618197 Jy ! Clean residual min=-0.005125 max=0.005505 Jy/beam ! Clean residual mean=0.000001 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 1.16084 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 172 components and 1.16084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071151Jy sigma=0.000587 ! Fit after self-cal, rms=0.071095Jy sigma=0.000586 wmodel J1033+4116_S_2017_02_19_pus_map.mod ! Writing 172 model components to file: J1033+4116_S_2017_02_19_pus_map.mod wobs J1033+4116_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1033+4116_S_2017_02_19_pus_uvs.fits wwins J1033+4116_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J1033+4116_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000830013 Jy ! Component: 100 - total flux cleaned = 0.000661506 Jy ! Component: 150 - total flux cleaned = 0.000345594 Jy ! Component: 200 - total flux cleaned = -0.000103448 Jy ! Component: 250 - total flux cleaned = -0.000530884 Jy ! Component: 300 - total flux cleaned = -0.00121114 Jy ! Component: 350 - total flux cleaned = -0.00186584 Jy ! Component: 400 - total flux cleaned = -0.00243556 Jy ! Component: 450 - total flux cleaned = -0.0030466 Jy ! Component: 500 - total flux cleaned = -0.00363511 Jy ! Component: 550 - total flux cleaned = -0.00420401 Jy ! Component: 600 - total flux cleaned = -0.00453289 Jy ! Component: 650 - total flux cleaned = -0.00495984 Jy ! Component: 700 - total flux cleaned = -0.00532338 Jy ! Component: 750 - total flux cleaned = -0.00572789 Jy ! Component: 800 - total flux cleaned = -0.00607033 Jy ! Component: 850 - total flux cleaned = -0.00645475 Jy ! Component: 900 - total flux cleaned = -0.00673627 Jy ! Component: 950 - total flux cleaned = -0.00715033 Jy ! Component: 1000 - total flux cleaned = -0.00746478 Jy ! Component: 1050 - total flux cleaned = -0.00781737 Jy ! Component: 1100 - total flux cleaned = -0.00811984 Jy ! Component: 1150 - total flux cleaned = -0.00854424 Jy ! Component: 1200 - total flux cleaned = -0.00891931 Jy ! Component: 1250 - total flux cleaned = -0.00932727 Jy ! Component: 1300 - total flux cleaned = -0.00940733 Jy ! Component: 1350 - total flux cleaned = -0.00964459 Jy ! Component: 1400 - total flux cleaned = -0.00980035 Jy ! Component: 1450 - total flux cleaned = -0.00995348 Jy ! Component: 1500 - total flux cleaned = -0.0100667 Jy ! Component: 1550 - total flux cleaned = -0.010141 Jy ! Component: 1600 - total flux cleaned = -0.0100673 Jy ! Component: 1650 - total flux cleaned = -0.0100318 Jy ! Component: 1700 - total flux cleaned = -0.0101756 Jy ! Component: 1750 - total flux cleaned = -0.0101759 Jy ! Component: 1800 - total flux cleaned = -0.0102117 Jy ! Component: 1850 - total flux cleaned = -0.0103853 Jy ! Component: 1900 - total flux cleaned = -0.01042 Jy ! Component: 1950 - total flux cleaned = -0.0104546 Jy ! Component: 2000 - total flux cleaned = -0.0105558 Jy ! Component: 2050 - total flux cleaned = -0.0106225 Jy ! Component: 2100 - total flux cleaned = -0.0106553 Jy ! Component: 2150 - total flux cleaned = -0.0107209 Jy ! Component: 2200 - total flux cleaned = -0.0107533 Jy ! Component: 2250 - total flux cleaned = -0.0107211 Jy ! Component: 2300 - total flux cleaned = -0.0107853 Jy ! Component: 2350 - total flux cleaned = -0.0109122 Jy ! Component: 2400 - total flux cleaned = -0.0109438 Jy ! Component: 2450 - total flux cleaned = -0.0110376 Jy ! Component: 2500 - total flux cleaned = -0.0110689 Jy ! Component: 2550 - total flux cleaned = -0.0111305 Jy ! Component: 2600 - total flux cleaned = -0.0112835 Jy ! Component: 2650 - total flux cleaned = -0.0113747 Jy ! Component: 2700 - total flux cleaned = -0.0113747 Jy ! Component: 2750 - total flux cleaned = -0.0114948 Jy ! Component: 2800 - total flux cleaned = -0.0115244 Jy ! Component: 2850 - total flux cleaned = -0.0114056 Jy ! Component: 2900 - total flux cleaned = -0.0114057 Jy ! Component: 2950 - total flux cleaned = -0.0113175 Jy ! Component: 3000 - total flux cleaned = -0.0112589 Jy ! Component: 3050 - total flux cleaned = -0.0112588 Jy ! Component: 3100 - total flux cleaned = -0.0112876 Jy ! Component: 3150 - total flux cleaned = -0.0112005 Jy ! Component: 3200 - total flux cleaned = -0.0111714 Jy ! Component: 3250 - total flux cleaned = -0.0111424 Jy ! Component: 3300 - total flux cleaned = -0.0111424 Jy ! Component: 3350 - total flux cleaned = -0.0111424 Jy ! Component: 3400 - total flux cleaned = -0.0111137 Jy ! Component: 3450 - total flux cleaned = -0.0110846 Jy ! Component: 3500 - total flux cleaned = -0.0109694 Jy ! Component: 3550 - total flux cleaned = -0.0109692 Jy ! Component: 3600 - total flux cleaned = -0.0109404 Jy ! Component: 3650 - total flux cleaned = -0.0109403 Jy ! Component: 3700 - total flux cleaned = -0.0108829 Jy ! Component: 3750 - total flux cleaned = -0.0109404 Jy ! Component: 3800 - total flux cleaned = -0.0109115 Jy ! Component: 3850 - total flux cleaned = -0.0108828 Jy ! Component: 3900 - total flux cleaned = -0.0108248 Jy ! Component: 3950 - total flux cleaned = -0.0108248 Jy ! Component: 4000 - total flux cleaned = -0.0107958 Jy ! Component: 4050 - total flux cleaned = -0.0107664 Jy ! Total flux subtracted in 4096 components = -0.0107372 Jy ! Clean residual min=-0.001737 max=0.001856 Jy/beam ! Clean residual mean=0.000000 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 1.1501 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 445 components and 1.1501 Jy ![Exited script file: muppet] wmap "J1033+4116_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.335 x 10.25 at 43.01 degrees (North through East) ! Clean map min=-0.0039144 max=1.0795 Jy/beam ! Writing clean map to FITS file: J1033+4116_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.07952 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000467381 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.129886 0.129886 0.259771 0.519542 1.03908 2.07817 4.15634 8.31268 16.6254 33.2507 66.5014 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.335 x 10.25 at 43.01 degrees (North through East) ! Clean map min=-0.0039144 max=1.0795 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033+4116_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:48:55 2019