! Started logfile: J1033+4116_S_2017_01_21_pus_uvs.log on Sun May 5 15:52:29 2019 obs J1033+4116_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1033+4116_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.652778 visibilities/baseline/integration-bin. ! Found source: J1033+4116 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033+4116_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.162863Jy sigma=0.001231 ! Fit after self-cal, rms=0.135263Jy sigma=0.000991 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.485 mas, bmaj=9.579 mas, bpa=-41.89 degrees ! Estimated noise=4331.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.808992 Jy ! Component: 100 - total flux cleaned = 0.985414 Jy ! Total flux subtracted in 100 components = 0.985414 Jy ! Clean residual min=-0.031287 max=0.062169 Jy/beam ! Clean residual mean=0.000128 rms=0.010658 Jy/beam ! Combined flux in latest and established models = 0.985414 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.985414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139902Jy sigma=0.001038 ! Fit after self-cal, rms=0.139903Jy sigma=0.001038 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=9.657 mas, bpa=-40.19 degrees ! Estimated noise=3585.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484185 Jy ! Component: 100 - total flux cleaned = 0.0542376 Jy ! Component: 150 - total flux cleaned = 0.0547306 Jy ! Component: 200 - total flux cleaned = 0.0557012 Jy ! Total flux subtracted in 200 components = 0.0557012 Jy ! Clean residual min=-0.028731 max=0.032895 Jy/beam ! Clean residual mean=0.000209 rms=0.007787 Jy/beam ! Combined flux in latest and established models = 1.04112 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.04112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124058Jy sigma=0.000887 ! Fit after self-cal, rms=0.123987Jy sigma=0.000886 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.94 LA 1.01 ! MK 0.98 NL 0.99 OV 1.10 PT 0.96 ! SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.97 LA 0.97 ! MK 0.97 NL 1.07 OV 1.11 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.98 LA 0.99 ! MK 1.00 NL 1.05 OV 1.01 PT 0.94 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.96 LA 1.05 ! MK 1.25 NL 1.00* OV 1.07 PT 0.96 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.123987Jy sigma=0.000886 ! Fit after self-cal, rms=0.092878Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=9.578 mas, bpa=-40.05 degrees ! Estimated noise=3563.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00863974 Jy ! Component: 100 - total flux cleaned = 0.0131031 Jy ! Component: 150 - total flux cleaned = 0.0140322 Jy ! Component: 200 - total flux cleaned = 0.0147013 Jy ! Total flux subtracted in 200 components = 0.0147013 Jy ! Clean residual min=-0.008254 max=0.012238 Jy/beam ! Clean residual mean=0.000030 rms=0.002666 Jy/beam ! Combined flux in latest and established models = 1.05582 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 1.05582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091861Jy sigma=0.000651 ! Fit after self-cal, rms=0.091930Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091930Jy sigma=0.000650 ! Fit after self-cal, rms=0.091825Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=9.573 mas, bpa=-40.08 degrees ! Estimated noise=3565.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500162 Jy ! Component: 100 - total flux cleaned = 0.00595719 Jy ! Component: 150 - total flux cleaned = 0.00652845 Jy ! Component: 200 - total flux cleaned = 0.00713865 Jy ! Total flux subtracted in 200 components = 0.00713865 Jy ! Clean residual min=-0.007944 max=0.010845 Jy/beam ! Clean residual mean=0.000030 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 1.06296 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 1.06296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091384Jy sigma=0.000646 ! Fit after self-cal, rms=0.091374Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (120.5, 106). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00682028 Jy ! Component: 100 - total flux cleaned = 0.00750802 Jy ! Component: 150 - total flux cleaned = 0.00786309 Jy ! Component: 200 - total flux cleaned = 0.00787878 Jy ! Total flux subtracted in 200 components = 0.00787878 Jy ! Clean residual min=-0.008995 max=0.007666 Jy/beam ! Clean residual mean=0.000015 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 1.07083 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 1.07083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090126Jy sigma=0.000636 ! Fit after self-cal, rms=0.090067Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090067Jy sigma=0.000635 ! Fit after self-cal, rms=0.089790Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=9.566 mas, bpa=-40.11 degrees ! Estimated noise=3564.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017054 Jy ! Component: 100 - total flux cleaned = 0.00251671 Jy ! Component: 150 - total flux cleaned = 0.00287198 Jy ! Component: 200 - total flux cleaned = 0.00297294 Jy ! Total flux subtracted in 200 components = 0.00297294 Jy ! Clean residual min=-0.006734 max=0.006738 Jy/beam ! Clean residual mean=0.000014 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 1.07381 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 1.07381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089414Jy sigma=0.000631 ! Fit after self-cal, rms=0.089385Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.59826e-05 Jy ! Component: 100 - total flux cleaned = -2.62433e-05 Jy ! Component: 150 - total flux cleaned = -2.81868e-05 Jy ! Component: 200 - total flux cleaned = -2.67242e-05 Jy ! Total flux subtracted in 200 components = -2.67242e-05 Jy ! Clean residual min=-0.006439 max=0.006326 Jy/beam ! Clean residual mean=0.000013 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 1.07378 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 1.07378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089212Jy sigma=0.000630 ! Fit after self-cal, rms=0.089198Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089198Jy sigma=0.000630 ! Fit after self-cal, rms=0.089125Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.94 mas, bmaj=9.877 mas, bpa=-38.43 degrees ! Estimated noise=4366.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011277 Jy ! Component: 100 - total flux cleaned = 0.000947793 Jy ! Component: 150 - total flux cleaned = 0.000787981 Jy ! Component: 200 - total flux cleaned = 0.000738168 Jy ! Total flux subtracted in 200 components = 0.000738168 Jy ! Clean residual min=-0.006135 max=0.005837 Jy/beam ! Clean residual mean=0.000028 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 1.07452 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 1.07452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089075Jy sigma=0.000630 ! Fit after self-cal, rms=0.089073Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.89595e-05 Jy ! Component: 100 - total flux cleaned = 1.51808e-05 Jy ! Component: 150 - total flux cleaned = 5.9724e-05 Jy ! Component: 200 - total flux cleaned = 0.000100197 Jy ! Total flux subtracted in 200 components = 0.000100197 Jy ! Clean residual min=-0.006027 max=0.005791 Jy/beam ! Clean residual mean=0.000025 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 1.07462 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 1.07462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089048Jy sigma=0.000629 ! Fit after self-cal, rms=0.089048Jy sigma=0.000629 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=9.562 mas, bpa=-40.11 degrees ! Estimated noise=3563.69 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 9.562 at -40.11 degrees (North through East) ! Clean map min=-0.0071213 max=1.0348 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089048Jy sigma=0.000629 ! Fit after self-cal, rms=0.080172Jy sigma=0.000560 ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=9.563 mas, bpa=-40.11 degrees ! Estimated noise=3563.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331645 Jy ! Component: 100 - total flux cleaned = -0.000611336 Jy ! Component: 150 - total flux cleaned = -0.000610397 Jy ! Component: 200 - total flux cleaned = -0.000552081 Jy ! Total flux subtracted in 200 components = -0.000552081 Jy ! Clean residual min=-0.005644 max=0.006178 Jy/beam ! Clean residual mean=0.000010 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 1.07407 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 1.07407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080062Jy sigma=0.000559 ! Fit after self-cal, rms=0.080046Jy sigma=0.000559 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.23514e-05 Jy ! Component: 100 - total flux cleaned = 0.00014556 Jy ! Component: 150 - total flux cleaned = 0.000194224 Jy ! Component: 200 - total flux cleaned = 0.000243671 Jy ! Total flux subtracted in 200 components = 0.000243671 Jy ! Clean residual min=-0.005800 max=0.006064 Jy/beam ! Clean residual mean=0.000010 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 1.07431 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 144 components and 1.07431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079977Jy sigma=0.000559 ! Fit after self-cal, rms=0.079968Jy sigma=0.000559 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079968Jy sigma=0.000559 ! Fit after self-cal, rms=0.079959Jy sigma=0.000558 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.486 mas, bmaj=9.473 mas, bpa=-41.83 degrees ! Estimated noise=4294.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.802063 Jy ! Component: 100 - total flux cleaned = 0.977005 Jy ! Component: 150 - total flux cleaned = 1.02055 Jy ! Component: 200 - total flux cleaned = 1.03996 Jy ! Total flux subtracted in 200 components = 1.03996 Jy ! Clean residual min=-0.014926 max=0.013657 Jy/beam ! Clean residual mean=0.000038 rms=0.003421 Jy/beam ! Combined flux in latest and established models = 1.03996 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.03996 Jy ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=9.563 mas, bpa=-40.11 degrees ! Estimated noise=3563.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153995 Jy ! Component: 100 - total flux cleaned = 0.0194314 Jy ! Component: 150 - total flux cleaned = 0.0229173 Jy ! Component: 200 - total flux cleaned = 0.0255519 Jy ! Total flux subtracted in 200 components = 0.0255519 Jy ! Clean residual min=-0.008870 max=0.008045 Jy/beam ! Clean residual mean=0.000039 rms=0.002395 Jy/beam ! Combined flux in latest and established models = 1.06551 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 1.06551 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.937 mas, bmaj=9.875 mas, bpa=-38.45 degrees ! Estimated noise=4368.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00694745 Jy ! Component: 100 - total flux cleaned = 0.00830957 Jy ! Component: 150 - total flux cleaned = 0.00885793 Jy ! Component: 200 - total flux cleaned = 0.00930972 Jy ! Total flux subtracted in 200 components = 0.00930972 Jy ! Clean residual min=-0.007275 max=0.006879 Jy/beam ! Clean residual mean=0.000026 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 1.07482 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129454 Jy ! Component: 100 - total flux cleaned = 0.000133611 Jy ! Component: 150 - total flux cleaned = 2.98472e-05 Jy ! Component: 200 - total flux cleaned = -6.86418e-05 Jy ! Total flux subtracted in 200 components = -6.86418e-05 Jy ! Clean residual min=-0.006702 max=0.007393 Jy/beam ! Clean residual mean=0.000023 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 1.07475 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 77 components and 1.07475 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=9.563 mas, bpa=-40.11 degrees ! Estimated noise=3563.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126096 Jy ! Component: 100 - total flux cleaned = -0.00108285 Jy ! Component: 150 - total flux cleaned = -0.00108294 Jy ! Component: 200 - total flux cleaned = -0.000940204 Jy ! Total flux subtracted in 200 components = -0.000940204 Jy ! Clean residual min=-0.005988 max=0.007254 Jy/beam ! Clean residual mean=0.000007 rms=0.001694 Jy/beam ! Combined flux in latest and established models = 1.07381 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 92 components and 1.07381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080460Jy sigma=0.000562 ! Fit after self-cal, rms=0.080464Jy sigma=0.000562 wmodel J1033+4116_S_2017_01_21_pus_map.mod ! Writing 92 model components to file: J1033+4116_S_2017_01_21_pus_map.mod wobs J1033+4116_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1033+4116_S_2017_01_21_pus_uvs.fits wwins J1033+4116_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1033+4116_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247421 Jy ! Component: 100 - total flux cleaned = 0.00258216 Jy ! Component: 150 - total flux cleaned = 0.00277576 Jy ! Component: 200 - total flux cleaned = 0.00277512 Jy ! Component: 250 - total flux cleaned = 0.00295027 Jy ! Component: 300 - total flux cleaned = 0.00286779 Jy ! Component: 350 - total flux cleaned = 0.0031064 Jy ! Component: 400 - total flux cleaned = 0.00318392 Jy ! Component: 450 - total flux cleaned = 0.00361791 Jy ! Component: 500 - total flux cleaned = 0.00403517 Jy ! Component: 550 - total flux cleaned = 0.00444002 Jy ! Component: 600 - total flux cleaned = 0.00463541 Jy ! Component: 650 - total flux cleaned = 0.00488602 Jy ! Component: 700 - total flux cleaned = 0.00506811 Jy ! Component: 750 - total flux cleaned = 0.0050684 Jy ! Component: 800 - total flux cleaned = 0.00501154 Jy ! Component: 850 - total flux cleaned = 0.00501254 Jy ! Component: 900 - total flux cleaned = 0.00512319 Jy ! Component: 950 - total flux cleaned = 0.00528377 Jy ! Component: 1000 - total flux cleaned = 0.00538815 Jy ! Component: 1050 - total flux cleaned = 0.00548951 Jy ! Component: 1100 - total flux cleaned = 0.00559084 Jy ! Component: 1150 - total flux cleaned = 0.00593356 Jy ! Component: 1200 - total flux cleaned = 0.00598072 Jy ! Component: 1250 - total flux cleaned = 0.00617094 Jy ! Component: 1300 - total flux cleaned = 0.00649498 Jy ! Component: 1350 - total flux cleaned = 0.00663101 Jy ! Component: 1400 - total flux cleaned = 0.0068097 Jy ! Component: 1450 - total flux cleaned = 0.00689757 Jy ! Component: 1500 - total flux cleaned = 0.00702756 Jy ! Component: 1550 - total flux cleaned = 0.00736724 Jy ! Component: 1600 - total flux cleaned = 0.00745057 Jy ! Component: 1650 - total flux cleaned = 0.00777992 Jy ! Component: 1700 - total flux cleaned = 0.00794124 Jy ! Component: 1750 - total flux cleaned = 0.00798105 Jy ! Component: 1800 - total flux cleaned = 0.0082573 Jy ! Component: 1850 - total flux cleaned = 0.00845127 Jy ! Component: 1900 - total flux cleaned = 0.00864272 Jy ! Component: 1950 - total flux cleaned = 0.00868001 Jy ! Component: 2000 - total flux cleaned = 0.0088294 Jy ! Component: 2050 - total flux cleaned = 0.00901391 Jy ! Component: 2100 - total flux cleaned = 0.00912321 Jy ! Component: 2150 - total flux cleaned = 0.00926773 Jy ! Component: 2200 - total flux cleaned = 0.00951848 Jy ! Component: 2250 - total flux cleaned = 0.00973112 Jy ! Component: 2300 - total flux cleaned = 0.0100465 Jy ! Component: 2350 - total flux cleaned = 0.0102551 Jy ! Component: 2400 - total flux cleaned = 0.0105652 Jy ! Component: 2450 - total flux cleaned = 0.0107699 Jy ! Component: 2500 - total flux cleaned = 0.0109735 Jy ! Component: 2550 - total flux cleaned = 0.0112086 Jy ! Component: 2600 - total flux cleaned = 0.0113416 Jy ! Component: 2650 - total flux cleaned = 0.0115403 Jy ! Component: 2700 - total flux cleaned = 0.0116714 Jy ! Component: 2750 - total flux cleaned = 0.0117695 Jy ! Component: 2800 - total flux cleaned = 0.0118665 Jy ! Component: 2850 - total flux cleaned = 0.0119631 Jy ! Component: 2900 - total flux cleaned = 0.0120909 Jy ! Component: 2950 - total flux cleaned = 0.0122496 Jy ! Component: 3000 - total flux cleaned = 0.0124072 Jy ! Component: 3050 - total flux cleaned = 0.0125011 Jy ! Component: 3100 - total flux cleaned = 0.0127195 Jy ! Component: 3150 - total flux cleaned = 0.0128128 Jy ! Component: 3200 - total flux cleaned = 0.012968 Jy ! Component: 3250 - total flux cleaned = 0.0131225 Jy ! Component: 3300 - total flux cleaned = 0.0133383 Jy ! Component: 3350 - total flux cleaned = 0.0134614 Jy ! Component: 3400 - total flux cleaned = 0.0136148 Jy ! Component: 3450 - total flux cleaned = 0.0137065 Jy ! Component: 3500 - total flux cleaned = 0.0138288 Jy ! Component: 3550 - total flux cleaned = 0.0139815 Jy ! Component: 3600 - total flux cleaned = 0.0141341 Jy ! Component: 3650 - total flux cleaned = 0.0143169 Jy ! Component: 3700 - total flux cleaned = 0.0144083 Jy ! Component: 3750 - total flux cleaned = 0.0145908 Jy ! Component: 3800 - total flux cleaned = 0.0147428 Jy ! Component: 3850 - total flux cleaned = 0.0148034 Jy ! Component: 3900 - total flux cleaned = 0.0150463 Jy ! Component: 3950 - total flux cleaned = 0.0151374 Jy ! Component: 4000 - total flux cleaned = 0.0153496 Jy ! Component: 4050 - total flux cleaned = 0.0155619 Jy ! Total flux subtracted in 4096 components = 0.015653 Jy ! Clean residual min=-0.001764 max=0.002023 Jy/beam ! Clean residual mean=0.000003 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 1.08946 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 360 components and 1.08946 Jy ![Exited script file: muppet] wmap "J1033+4116_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 9.563 at -40.11 degrees (North through East) ! Clean map min=-0.0080854 max=1.0358 Jy/beam ! Writing clean map to FITS file: J1033+4116_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.03576 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000512877 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.148551 0.148551 0.297103 0.594206 1.18841 2.37682 4.75365 9.50729 19.0146 38.0292 76.0583 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.035 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 9.563 at -40.11 degrees (North through East) ! Clean map min=-0.0080854 max=1.0358 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033+4116_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:52:33 2019