! Started logfile: J1033+4116_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:11:31 2019 obs J1033+4116_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1033+4116_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.572222 visibilities/baseline/integration-bin. ! Found source: J1033+4116 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033+4116_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.191037Jy sigma=0.001717 ! Fit after self-cal, rms=0.182107Jy sigma=0.001647 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=10.05 mas, bpa=13.88 degrees ! Estimated noise=3286.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.858003 Jy ! Component: 100 - total flux cleaned = 1.04681 Jy ! Total flux subtracted in 100 components = 1.04681 Jy ! Clean residual min=-0.033292 max=0.075901 Jy/beam ! Clean residual mean=0.000175 rms=0.013183 Jy/beam ! Combined flux in latest and established models = 1.04681 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.04681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160472Jy sigma=0.001377 ! Fit after self-cal, rms=0.160476Jy sigma=0.001377 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.157 mas, bmaj=10.89 mas, bpa=13.57 degrees ! Estimated noise=2816.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0740556 Jy ! Component: 100 - total flux cleaned = 0.112121 Jy ! Component: 150 - total flux cleaned = 0.135075 Jy ! Component: 200 - total flux cleaned = 0.149421 Jy ! Total flux subtracted in 200 components = 0.149421 Jy ! Clean residual min=-0.022645 max=0.028646 Jy/beam ! Clean residual mean=0.000101 rms=0.006432 Jy/beam ! Combined flux in latest and established models = 1.19623 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 1.19623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129410Jy sigma=0.000943 ! Fit after self-cal, rms=0.129250Jy sigma=0.000941 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 1.00* KP 1.01 ! LA 1.03 MK 1.00* NL 0.91 OV 1.02 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.00* KP 0.97 ! LA 0.98 MK 1.00* NL 1.02 OV 1.04 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 1.00* KP 1.02 ! LA 1.02 MK 1.00* NL 1.00 OV 0.96 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.00* KP 1.00* ! LA 1.06 MK 1.00* NL 1.00* OV 0.99 ! PT 0.99 SC 1.35 ! ! ! Fit before self-cal, rms=0.129250Jy sigma=0.000941 ! Fit after self-cal, rms=0.100635Jy sigma=0.000723 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.152 mas, bmaj=10.96 mas, bpa=13.18 degrees ! Estimated noise=2803.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00492131 Jy ! Component: 100 - total flux cleaned = -0.00598127 Jy ! Component: 150 - total flux cleaned = -0.00647082 Jy ! Component: 200 - total flux cleaned = -0.00702338 Jy ! Total flux subtracted in 200 components = -0.00702338 Jy ! Clean residual min=-0.013410 max=0.015205 Jy/beam ! Clean residual mean=0.000060 rms=0.003446 Jy/beam ! Combined flux in latest and established models = 1.18921 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 1.18921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099782Jy sigma=0.000713 ! Fit after self-cal, rms=0.099804Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099804Jy sigma=0.000712 ! Fit after self-cal, rms=0.099250Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.148 mas, bmaj=10.98 mas, bpa=13.1 degrees ! Estimated noise=2801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00467379 Jy ! Component: 100 - total flux cleaned = -0.00562297 Jy ! Component: 150 - total flux cleaned = -0.00588879 Jy ! Component: 200 - total flux cleaned = -0.00600745 Jy ! Total flux subtracted in 200 components = -0.00600745 Jy ! Clean residual min=-0.012245 max=0.014537 Jy/beam ! Clean residual mean=0.000054 rms=0.003164 Jy/beam ! Combined flux in latest and established models = 1.1832 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 1.1832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098739Jy sigma=0.000704 ! Fit after self-cal, rms=0.098754Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664469 Jy ! Component: 100 - total flux cleaned = 0.00722716 Jy ! Component: 150 - total flux cleaned = 0.006876 Jy ! Component: 200 - total flux cleaned = 0.00684658 Jy ! Total flux subtracted in 200 components = 0.00684658 Jy ! Clean residual min=-0.010131 max=0.007863 Jy/beam ! Clean residual mean=0.000019 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 1.19005 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 1.19005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096698Jy sigma=0.000679 ! Fit after self-cal, rms=0.096731Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096731Jy sigma=0.000679 ! Fit after self-cal, rms=0.096231Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.143 mas, bmaj=11 mas, bpa=13.05 degrees ! Estimated noise=2796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000726526 Jy ! Component: 100 - total flux cleaned = 0.000727168 Jy ! Component: 150 - total flux cleaned = 0.00117069 Jy ! Component: 200 - total flux cleaned = 0.00127427 Jy ! Total flux subtracted in 200 components = 0.00127427 Jy ! Clean residual min=-0.008566 max=0.006846 Jy/beam ! Clean residual mean=0.000006 rms=0.001793 Jy/beam ! Combined flux in latest and established models = 1.19132 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 90 components and 1.19132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095929Jy sigma=0.000673 ! Fit after self-cal, rms=0.095940Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.11002e-05 Jy ! Component: 100 - total flux cleaned = 9.45151e-05 Jy ! Component: 150 - total flux cleaned = 0.000265121 Jy ! Component: 200 - total flux cleaned = 0.000342868 Jy ! Total flux subtracted in 200 components = 0.000342868 Jy ! Clean residual min=-0.007935 max=0.006647 Jy/beam ! Clean residual mean=0.000005 rms=0.001701 Jy/beam ! Combined flux in latest and established models = 1.19167 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 101 components and 1.19167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095753Jy sigma=0.000672 ! Fit after self-cal, rms=0.095744Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095744Jy sigma=0.000672 ! Fit after self-cal, rms=0.095649Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.557 mas, bmaj=11.78 mas, bpa=22.13 degrees ! Estimated noise=3095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000557187 Jy ! Component: 100 - total flux cleaned = -0.000550271 Jy ! Component: 150 - total flux cleaned = -0.00047646 Jy ! Component: 200 - total flux cleaned = -0.000342278 Jy ! Total flux subtracted in 200 components = -0.000342278 Jy ! Clean residual min=-0.008395 max=0.006985 Jy/beam ! Clean residual mean=0.000006 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 1.19132 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 122 components and 1.19132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095707Jy sigma=0.000670 ! Fit after self-cal, rms=0.095724Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333675 Jy ! Component: 100 - total flux cleaned = 0.000394634 Jy ! Component: 150 - total flux cleaned = 0.00039515 Jy ! Component: 200 - total flux cleaned = 0.000394594 Jy ! Total flux subtracted in 200 components = 0.000394594 Jy ! Clean residual min=-0.007985 max=0.006867 Jy/beam ! Clean residual mean=0.000004 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 1.19172 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 1.19172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095751Jy sigma=0.000670 ! Fit after self-cal, rms=0.095739Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.141 mas, bmaj=11 mas, bpa=13.03 degrees ! Estimated noise=2794.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.141 x 11 at 13.03 degrees (North through East) ! Clean map min=-0.0088186 max=1.1019 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095739Jy sigma=0.000670 ! Fit after self-cal, rms=0.085456Jy sigma=0.000613 ! Inverting map and beam ! Estimated beam: bmin=4.142 mas, bmaj=11 mas, bpa=13.02 degrees ! Estimated noise=2795.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292678 Jy ! Component: 100 - total flux cleaned = 0.000288847 Jy ! Component: 150 - total flux cleaned = 0.000209069 Jy ! Component: 200 - total flux cleaned = 0.000138728 Jy ! Total flux subtracted in 200 components = 0.000138728 Jy ! Clean residual min=-0.006903 max=0.006171 Jy/beam ! Clean residual mean=-0.000001 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 1.19186 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 147 components and 1.19186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085192Jy sigma=0.000612 ! Fit after self-cal, rms=0.085143Jy sigma=0.000612 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.94473e-05 Jy ! Component: 100 - total flux cleaned = -6.04182e-05 Jy ! Component: 150 - total flux cleaned = -5.87682e-05 Jy ! Component: 200 - total flux cleaned = -8.93192e-06 Jy ! Total flux subtracted in 200 components = -8.93192e-06 Jy ! Clean residual min=-0.006581 max=0.006154 Jy/beam ! Clean residual mean=-0.000002 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 1.19185 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 161 components and 1.19185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084992Jy sigma=0.000611 ! Fit after self-cal, rms=0.084968Jy sigma=0.000611 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084968Jy sigma=0.000611 ! Fit after self-cal, rms=0.084860Jy sigma=0.000611 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=10.15 mas, bpa=13.31 degrees ! Estimated noise=3274.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.854903 Jy ! Component: 100 - total flux cleaned = 1.04134 Jy ! Component: 150 - total flux cleaned = 1.09183 Jy ! Component: 200 - total flux cleaned = 1.11898 Jy ! Total flux subtracted in 200 components = 1.11898 Jy ! Clean residual min=-0.012289 max=0.020047 Jy/beam ! Clean residual mean=0.000073 rms=0.004442 Jy/beam ! Combined flux in latest and established models = 1.11898 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.11898 Jy ! Inverting map and beam ! Estimated beam: bmin=4.141 mas, bmaj=11 mas, bpa=13.01 degrees ! Estimated noise=2793.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221171 Jy ! Component: 100 - total flux cleaned = 0.0365961 Jy ! Component: 150 - total flux cleaned = 0.0474252 Jy ! Component: 200 - total flux cleaned = 0.0540032 Jy ! Total flux subtracted in 200 components = 0.0540032 Jy ! Clean residual min=-0.009134 max=0.009163 Jy/beam ! Clean residual mean=0.000052 rms=0.002561 Jy/beam ! Combined flux in latest and established models = 1.17299 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 58 components and 1.17299 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.557 mas, bmaj=11.78 mas, bpa=22.03 degrees ! Estimated noise=3094.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00736132 Jy ! Component: 100 - total flux cleaned = 0.0108963 Jy ! Component: 150 - total flux cleaned = 0.0132817 Jy ! Component: 200 - total flux cleaned = 0.014713 Jy ! Total flux subtracted in 200 components = 0.014713 Jy ! Clean residual min=-0.009543 max=0.006809 Jy/beam ! Clean residual mean=0.000027 rms=0.002068 Jy/beam ! Combined flux in latest and established models = 1.1877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122825 Jy ! Component: 100 - total flux cleaned = 0.00216138 Jy ! Component: 150 - total flux cleaned = 0.00308888 Jy ! Component: 200 - total flux cleaned = 0.00388882 Jy ! Total flux subtracted in 200 components = 0.00388882 Jy ! Clean residual min=-0.008475 max=0.006556 Jy/beam ! Clean residual mean=0.000009 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 1.19159 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 105 components and 1.19159 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.141 mas, bmaj=11 mas, bpa=13.01 degrees ! Estimated noise=2793.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.76683e-05 Jy ! Component: 100 - total flux cleaned = 0.000167822 Jy ! Component: 150 - total flux cleaned = 0.000491038 Jy ! Component: 200 - total flux cleaned = 0.000586844 Jy ! Total flux subtracted in 200 components = 0.000586844 Jy ! Clean residual min=-0.006760 max=0.006131 Jy/beam ! Clean residual mean=0.000003 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 1.19218 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 130 components and 1.19218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085444Jy sigma=0.000614 ! Fit after self-cal, rms=0.085461Jy sigma=0.000614 wmodel J1033+4116_S_2017_01_16_pus_map.mod ! Writing 130 model components to file: J1033+4116_S_2017_01_16_pus_map.mod wobs J1033+4116_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1033+4116_S_2017_01_16_pus_uvs.fits wwins J1033+4116_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J1033+4116_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217445 Jy ! Component: 100 - total flux cleaned = 0.000965593 Jy ! Component: 150 - total flux cleaned = 0.00168626 Jy ! Component: 200 - total flux cleaned = 0.00242379 Jy ! Component: 250 - total flux cleaned = 0.00327455 Jy ! Component: 300 - total flux cleaned = 0.00415539 Jy ! Component: 350 - total flux cleaned = 0.00513291 Jy ! Component: 400 - total flux cleaned = 0.00573591 Jy ! Component: 450 - total flux cleaned = 0.00650769 Jy ! Component: 500 - total flux cleaned = 0.0070658 Jy ! Component: 550 - total flux cleaned = 0.00772409 Jy ! Component: 600 - total flux cleaned = 0.00835763 Jy ! Component: 650 - total flux cleaned = 0.0087462 Jy ! Component: 700 - total flux cleaned = 0.00901606 Jy ! Component: 750 - total flux cleaned = 0.00948955 Jy ! Component: 800 - total flux cleaned = 0.00969353 Jy ! Component: 850 - total flux cleaned = 0.00979263 Jy ! Component: 900 - total flux cleaned = 0.0100382 Jy ! Component: 950 - total flux cleaned = 0.010182 Jy ! Component: 1000 - total flux cleaned = 0.0103712 Jy ! Component: 1050 - total flux cleaned = 0.0105104 Jy ! Component: 1100 - total flux cleaned = 0.0105563 Jy ! Component: 1150 - total flux cleaned = 0.0105564 Jy ! Component: 1200 - total flux cleaned = 0.0106008 Jy ! Component: 1250 - total flux cleaned = 0.0106879 Jy ! Component: 1300 - total flux cleaned = 0.0107306 Jy ! Component: 1350 - total flux cleaned = 0.0107305 Jy ! Component: 1400 - total flux cleaned = 0.0107729 Jy ! Component: 1450 - total flux cleaned = 0.0108559 Jy ! Component: 1500 - total flux cleaned = 0.0108964 Jy ! Component: 1550 - total flux cleaned = 0.0108553 Jy ! Component: 1600 - total flux cleaned = 0.0108153 Jy ! Component: 1650 - total flux cleaned = 0.0107756 Jy ! Component: 1700 - total flux cleaned = 0.0106965 Jy ! Component: 1750 - total flux cleaned = 0.0106182 Jy ! Component: 1800 - total flux cleaned = 0.0104624 Jy ! Component: 1850 - total flux cleaned = 0.0103462 Jy ! Component: 1900 - total flux cleaned = 0.0101147 Jy ! Component: 1950 - total flux cleaned = 0.00999947 Jy ! Component: 2000 - total flux cleaned = 0.00980783 Jy ! Component: 2050 - total flux cleaned = 0.00961721 Jy ! Component: 2100 - total flux cleaned = 0.00942731 Jy ! Component: 2150 - total flux cleaned = 0.00923767 Jy ! Component: 2200 - total flux cleaned = 0.0090866 Jy ! Component: 2250 - total flux cleaned = 0.00897342 Jy ! Component: 2300 - total flux cleaned = 0.00882308 Jy ! Component: 2350 - total flux cleaned = 0.00878561 Jy ! Component: 2400 - total flux cleaned = 0.00871024 Jy ! Component: 2450 - total flux cleaned = 0.00867272 Jy ! Component: 2500 - total flux cleaned = 0.00855984 Jy ! Component: 2550 - total flux cleaned = 0.00852224 Jy ! Component: 2600 - total flux cleaned = 0.00844713 Jy ! Component: 2650 - total flux cleaned = 0.00844694 Jy ! Component: 2700 - total flux cleaned = 0.00837158 Jy ! Component: 2750 - total flux cleaned = 0.00837156 Jy ! Component: 2800 - total flux cleaned = 0.00825808 Jy ! Component: 2850 - total flux cleaned = 0.00825792 Jy ! Component: 2900 - total flux cleaned = 0.00818206 Jy ! Component: 2950 - total flux cleaned = 0.00810622 Jy ! Component: 3000 - total flux cleaned = 0.00803023 Jy ! Component: 3050 - total flux cleaned = 0.0080306 Jy ! Component: 3100 - total flux cleaned = 0.00791598 Jy ! Component: 3150 - total flux cleaned = 0.0078393 Jy ! Component: 3200 - total flux cleaned = 0.00776243 Jy ! Component: 3250 - total flux cleaned = 0.00768528 Jy ! Component: 3300 - total flux cleaned = 0.00753009 Jy ! Component: 3350 - total flux cleaned = 0.00741344 Jy ! Component: 3400 - total flux cleaned = 0.00725655 Jy ! Component: 3450 - total flux cleaned = 0.00713863 Jy ! Component: 3500 - total flux cleaned = 0.00705998 Jy ! Component: 3550 - total flux cleaned = 0.00698061 Jy ! Component: 3600 - total flux cleaned = 0.00694087 Jy ! Component: 3650 - total flux cleaned = 0.0068609 Jy ! Component: 3700 - total flux cleaned = 0.00682052 Jy ! Component: 3750 - total flux cleaned = 0.00673928 Jy ! Component: 3800 - total flux cleaned = 0.00678019 Jy ! Component: 3850 - total flux cleaned = 0.00673901 Jy ! Component: 3900 - total flux cleaned = 0.00669782 Jy ! Component: 3950 - total flux cleaned = 0.00669794 Jy ! Component: 4000 - total flux cleaned = 0.00657144 Jy ! Component: 4050 - total flux cleaned = 0.0065713 Jy ! Total flux subtracted in 4096 components = 0.00648554 Jy ! Clean residual min=-0.002600 max=0.002720 Jy/beam ! Clean residual mean=-0.000020 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 1.19866 Jy keep ! Adding 204 model components to the UV plane model. ! The established model now contains 334 components and 1.19866 Jy ![Exited script file: muppet] wmap "J1033+4116_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.141 x 11 at 13.01 degrees (North through East) ! Clean map min=-0.0068447 max=1.1019 Jy/beam ! Writing clean map to FITS file: J1033+4116_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.10193 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000718048 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.195488 0.195488 0.390976 0.781952 1.5639 3.12781 6.25562 12.5112 25.0225 50.0449 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.141 x 11 at 13.01 degrees (North through East) ! Clean map min=-0.0068447 max=1.1019 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033+4116_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:11:36 2019