! Started logfile: J1033+071A_S_2017_07_16_pus_uvs.log on Thu May 9 11:07:15 2019 obs J1033+071A_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1033+071A_S_2017_07_16_pus_uva.fits ! AN table 1: 27 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.222222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1033+071A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 1080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033+071A_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.786936Jy sigma=0.007001 ! Fit after self-cal, rms=0.782458Jy sigma=0.007059 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=8.271 mas, bpa=20.97 degrees ! Estimated noise=3265.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166804 Jy ! Component: 100 - total flux cleaned = 0.20979 Jy ! Total flux subtracted in 100 components = 0.20979 Jy ! Clean residual min=-0.014022 max=0.019490 Jy/beam ! Clean residual mean=0.000058 rms=0.004419 Jy/beam ! Combined flux in latest and established models = 0.20979 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.20979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085934Jy sigma=0.000746 ! Fit after self-cal, rms=0.085912Jy sigma=0.000746 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.947 mas, bmaj=8.749 mas, bpa=20.39 degrees ! Estimated noise=2831.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232548 Jy ! Component: 100 - total flux cleaned = 0.0340986 Jy ! Component: 150 - total flux cleaned = 0.0385384 Jy ! Component: 200 - total flux cleaned = 0.0389651 Jy ! Total flux subtracted in 200 components = 0.0389651 Jy ! Clean residual min=-0.008089 max=0.006696 Jy/beam ! Clean residual mean=0.000004 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.248755 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 28 components and 0.248755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079580Jy sigma=0.000697 ! Fit after self-cal, rms=0.079548Jy sigma=0.000696 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.02 KP 1.02 ! LA 0.99 MK 1.00* NL 0.90 OV 1.03 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00 KP 0.96 ! LA 1.00 MK 1.00* NL 1.08 OV 1.04 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* HN 1.00 KP 1.08 ! LA 0.98 MK 1.00* NL 0.99 OV 0.91 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.079548Jy sigma=0.000696 ! Fit after self-cal, rms=0.075876Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.933 mas, bmaj=8.817 mas, bpa=21.65 degrees ! Estimated noise=2848.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243896 Jy ! Component: 100 - total flux cleaned = 0.00270212 Jy ! Component: 150 - total flux cleaned = 0.00287307 Jy ! Component: 200 - total flux cleaned = 0.00302623 Jy ! Total flux subtracted in 200 components = 0.00302623 Jy ! Clean residual min=-0.006743 max=0.006572 Jy/beam ! Clean residual mean=-0.000004 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 0.251781 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.251781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075774Jy sigma=0.000678 ! Fit after self-cal, rms=0.075758Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075758Jy sigma=0.000678 ! Fit after self-cal, rms=0.075639Jy sigma=0.000678 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.92 mas, bmaj=8.806 mas, bpa=21.76 degrees ! Estimated noise=2844.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163524 Jy ! Component: 100 - total flux cleaned = 0.00178248 Jy ! Component: 150 - total flux cleaned = 0.00182545 Jy ! Component: 200 - total flux cleaned = 0.0018654 Jy ! Total flux subtracted in 200 components = 0.0018654 Jy ! Clean residual min=-0.006508 max=0.006623 Jy/beam ! Clean residual mean=-0.000004 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 0.253647 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.253646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075586Jy sigma=0.000677 ! Fit after self-cal, rms=0.075580Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.80063e-05 Jy ! Component: 100 - total flux cleaned = 0.000103424 Jy ! Component: 150 - total flux cleaned = 0.000168251 Jy ! Component: 200 - total flux cleaned = 0.000197175 Jy ! Total flux subtracted in 200 components = 0.000197175 Jy ! Clean residual min=-0.006395 max=0.006605 Jy/beam ! Clean residual mean=-0.000004 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.253844 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.253844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075555Jy sigma=0.000677 ! Fit after self-cal, rms=0.075551Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075551Jy sigma=0.000677 ! Fit after self-cal, rms=0.075346Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.908 mas, bmaj=8.798 mas, bpa=21.88 degrees ! Estimated noise=2837.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106302 Jy ! Component: 100 - total flux cleaned = 0.00124568 Jy ! Component: 150 - total flux cleaned = 0.00127551 Jy ! Component: 200 - total flux cleaned = 0.00127468 Jy ! Total flux subtracted in 200 components = 0.00127468 Jy ! Clean residual min=-0.006126 max=0.006618 Jy/beam ! Clean residual mean=-0.000004 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 0.255118 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.255118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075317Jy sigma=0.000677 ! Fit after self-cal, rms=0.075314Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.92947e-06 Jy ! Component: 100 - total flux cleaned = 3.717e-05 Jy ! Component: 150 - total flux cleaned = 6.34483e-05 Jy ! Component: 200 - total flux cleaned = 6.34806e-05 Jy ! Total flux subtracted in 200 components = 6.34806e-05 Jy ! Clean residual min=-0.006090 max=0.006580 Jy/beam ! Clean residual mean=-0.000004 rms=0.001648 Jy/beam ! Combined flux in latest and established models = 0.255182 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.255182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075300Jy sigma=0.000677 ! Fit after self-cal, rms=0.075297Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075297Jy sigma=0.000677 ! Fit after self-cal, rms=0.075140Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.692 mas, bmaj=11.07 mas, bpa=0.644 degrees ! Estimated noise=3516.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000817804 Jy ! Component: 100 - total flux cleaned = 0.000763413 Jy ! Component: 150 - total flux cleaned = 0.00076323 Jy ! Component: 200 - total flux cleaned = 0.000745571 Jy ! Total flux subtracted in 200 components = 0.000745571 Jy ! Clean residual min=-0.007939 max=0.008244 Jy/beam ! Clean residual mean=-0.000005 rms=0.002235 Jy/beam ! Combined flux in latest and established models = 0.255927 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 63 components and 0.255927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075154Jy sigma=0.000677 ! Fit after self-cal, rms=0.075147Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.38104e-05 Jy ! Component: 100 - total flux cleaned = -6.69923e-05 Jy ! Component: 150 - total flux cleaned = -6.6173e-05 Jy ! Component: 200 - total flux cleaned = -7.92796e-05 Jy ! Total flux subtracted in 200 components = -7.92796e-05 Jy ! Clean residual min=-0.007902 max=0.008248 Jy/beam ! Clean residual mean=-0.000005 rms=0.002226 Jy/beam ! Combined flux in latest and established models = 0.255848 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.255848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075158Jy sigma=0.000677 ! Fit after self-cal, rms=0.075153Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=8.795 mas, bpa=22.01 degrees ! Estimated noise=2831.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.897 x 8.795 at 22.01 degrees (North through East) ! Clean map min=-0.0059812 max=0.21638 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=8.518 mas, bpa=23.2 degrees ! Estimated noise=3204.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.162714 Jy ! Component: 100 - total flux cleaned = 0.206335 Jy ! Component: 150 - total flux cleaned = 0.228241 Jy ! Component: 200 - total flux cleaned = 0.240111 Jy ! Total flux subtracted in 200 components = 0.240111 Jy ! Clean residual min=-0.008361 max=0.008123 Jy/beam ! Clean residual mean=0.000015 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 0.240111 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.240111 Jy ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=8.795 mas, bpa=22.01 degrees ! Estimated noise=2831.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073849 Jy ! Component: 100 - total flux cleaned = 0.0112332 Jy ! Component: 150 - total flux cleaned = 0.013496 Jy ! Component: 200 - total flux cleaned = 0.0149642 Jy ! Total flux subtracted in 200 components = 0.0149642 Jy ! Clean residual min=-0.006753 max=0.006771 Jy/beam ! Clean residual mean=-0.000003 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 0.255075 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.255075 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.692 mas, bmaj=11.07 mas, bpa=0.644 degrees ! Estimated noise=3516.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059439 Jy ! Component: 100 - total flux cleaned = 0.000534338 Jy ! Component: 150 - total flux cleaned = 0.000535259 Jy ! Component: 200 - total flux cleaned = 0.000488324 Jy ! Total flux subtracted in 200 components = 0.000488324 Jy ! Clean residual min=-0.008011 max=0.008193 Jy/beam ! Clean residual mean=-0.000004 rms=0.002231 Jy/beam ! Combined flux in latest and established models = 0.255563 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.06251e-05 Jy ! Component: 100 - total flux cleaned = -4.19306e-05 Jy ! Component: 150 - total flux cleaned = -6.12814e-05 Jy ! Component: 200 - total flux cleaned = -6.15365e-05 Jy ! Total flux subtracted in 200 components = -6.15365e-05 Jy ! Clean residual min=-0.007975 max=0.008153 Jy/beam ! Clean residual mean=-0.000004 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 0.255502 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.255502 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=8.795 mas, bpa=22.01 degrees ! Estimated noise=2831.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.21338e-05 Jy ! Component: 100 - total flux cleaned = -4.5704e-05 Jy ! Component: 150 - total flux cleaned = 4.15724e-05 Jy ! Component: 200 - total flux cleaned = 0.000163273 Jy ! Total flux subtracted in 200 components = 0.000163273 Jy ! Clean residual min=-0.006550 max=0.006642 Jy/beam ! Clean residual mean=-0.000004 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.255665 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.255665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075254Jy sigma=0.000677 ! Fit after self-cal, rms=0.075253Jy sigma=0.000677 wmodel J1033+071A_S_2017_07_16_pus_map.mod ! Writing 58 model components to file: J1033+071A_S_2017_07_16_pus_map.mod wobs J1033+071A_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1033+071A_S_2017_07_16_pus_uvs.fits wwins J1033+071A_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1033+071A_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00223021 Jy ! Component: 100 - total flux cleaned = -0.00304025 Jy ! Component: 150 - total flux cleaned = -0.00341556 Jy ! Component: 200 - total flux cleaned = -0.00375313 Jy ! Component: 250 - total flux cleaned = -0.00367182 Jy ! Component: 300 - total flux cleaned = -0.00344665 Jy ! Component: 350 - total flux cleaned = -0.00323496 Jy ! Component: 400 - total flux cleaned = -0.00303145 Jy ! Component: 450 - total flux cleaned = -0.00270656 Jy ! Component: 500 - total flux cleaned = -0.00226903 Jy ! Component: 550 - total flux cleaned = -0.00184736 Jy ! Component: 600 - total flux cleaned = -0.00155573 Jy ! Component: 650 - total flux cleaned = -0.00144304 Jy ! Component: 700 - total flux cleaned = -0.00117045 Jy ! Component: 750 - total flux cleaned = -0.00106418 Jy ! Component: 800 - total flux cleaned = -0.00075311 Jy ! Component: 850 - total flux cleaned = -0.000651599 Jy ! Component: 900 - total flux cleaned = -0.000502125 Jy ! Component: 950 - total flux cleaned = -0.000307755 Jy ! Component: 1000 - total flux cleaned = -0.000165493 Jy ! Component: 1050 - total flux cleaned = 1.96975e-05 Jy ! Component: 1100 - total flux cleaned = -7.13569e-05 Jy ! Component: 1150 - total flux cleaned = -7.13297e-05 Jy ! Component: 1200 - total flux cleaned = -2.79845e-05 Jy ! Component: 1250 - total flux cleaned = -7.04056e-05 Jy ! Component: 1300 - total flux cleaned = 9.94631e-05 Jy ! Component: 1350 - total flux cleaned = 5.99667e-05 Jy ! Component: 1400 - total flux cleaned = 0.000223705 Jy ! Component: 1450 - total flux cleaned = 0.000343913 Jy ! Component: 1500 - total flux cleaned = 0.000462429 Jy ! Component: 1550 - total flux cleaned = 0.000540926 Jy ! Component: 1600 - total flux cleaned = 0.000656855 Jy ! Component: 1650 - total flux cleaned = 0.000656833 Jy ! Component: 1700 - total flux cleaned = 0.000732961 Jy ! Component: 1750 - total flux cleaned = 0.000808144 Jy ! Component: 1800 - total flux cleaned = 0.000882562 Jy ! Component: 1850 - total flux cleaned = 0.000845578 Jy ! Component: 1900 - total flux cleaned = 0.000919327 Jy ! Component: 1950 - total flux cleaned = 0.000956216 Jy ! Component: 2000 - total flux cleaned = 0.00110216 Jy ! Component: 2050 - total flux cleaned = 0.00113815 Jy ! Component: 2100 - total flux cleaned = 0.00113788 Jy ! Component: 2150 - total flux cleaned = 0.00120957 Jy ! Component: 2200 - total flux cleaned = 0.00120947 Jy ! Component: 2250 - total flux cleaned = 0.00128077 Jy ! Component: 2300 - total flux cleaned = 0.00131639 Jy ! Component: 2350 - total flux cleaned = 0.00135159 Jy ! Component: 2400 - total flux cleaned = 0.0012815 Jy ! Component: 2450 - total flux cleaned = 0.00128179 Jy ! Component: 2500 - total flux cleaned = 0.00124718 Jy ! Component: 2550 - total flux cleaned = 0.00124717 Jy ! Component: 2600 - total flux cleaned = 0.00114351 Jy ! Component: 2650 - total flux cleaned = 0.00110907 Jy ! Component: 2700 - total flux cleaned = 0.00114346 Jy ! Component: 2750 - total flux cleaned = 0.00110919 Jy ! Component: 2800 - total flux cleaned = 0.00114359 Jy ! Component: 2850 - total flux cleaned = 0.00114385 Jy ! Component: 2900 - total flux cleaned = 0.00110976 Jy ! Component: 2950 - total flux cleaned = 0.00117793 Jy ! Component: 3000 - total flux cleaned = 0.00117788 Jy ! Component: 3050 - total flux cleaned = 0.0012119 Jy ! Component: 3100 - total flux cleaned = 0.00117806 Jy ! Component: 3150 - total flux cleaned = 0.0011442 Jy ! Component: 3200 - total flux cleaned = 0.00111036 Jy ! Component: 3250 - total flux cleaned = 0.00111048 Jy ! Component: 3300 - total flux cleaned = 0.00107644 Jy ! Component: 3350 - total flux cleaned = 0.00117819 Jy ! Component: 3400 - total flux cleaned = 0.00121222 Jy ! Component: 3450 - total flux cleaned = 0.00121223 Jy ! Component: 3500 - total flux cleaned = 0.00107573 Jy ! Component: 3550 - total flux cleaned = 0.000972769 Jy ! Component: 3600 - total flux cleaned = 0.000869994 Jy ! Component: 3650 - total flux cleaned = 0.000835586 Jy ! Component: 3700 - total flux cleaned = 0.0007666 Jy ! Component: 3750 - total flux cleaned = 0.000697449 Jy ! Component: 3800 - total flux cleaned = 0.00062806 Jy ! Component: 3850 - total flux cleaned = 0.000593116 Jy ! Component: 3900 - total flux cleaned = 0.000592892 Jy ! Component: 3950 - total flux cleaned = 0.000592607 Jy ! Component: 4000 - total flux cleaned = 0.00059227 Jy ! Component: 4050 - total flux cleaned = 0.000592272 Jy ! Total flux subtracted in 4096 components = 0.00059234 Jy ! Clean residual min=-0.002421 max=0.002531 Jy/beam ! Clean residual mean=-0.000000 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.256257 Jy keep ! Adding 223 model components to the UV plane model. ! The established model now contains 281 components and 0.256257 Jy ![Exited script file: muppet] wmap "J1033+071A_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.897 x 8.795 at 22.01 degrees (North through East) ! Clean map min=-0.0039784 max=0.21486 Jy/beam ! Writing clean map to FITS file: J1033+071A_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.214863 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000647432 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.90397 0.90397 1.80794 3.61588 7.23176 14.4635 28.927 57.8541 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.214 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.897 x 8.795 at 22.01 degrees (North through East) ! Clean map min=-0.0039784 max=0.21486 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033+071A_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:07:20 2019