! Started logfile: J1032-1400_S_2017_04_28_pus_uvs.log on Thu May 2 16:22:56 2019 obs J1032-1400_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1032-1400_S_2017_04_28_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.964848 visibilities/baseline/integration-bin. ! Found source: J1032-1400 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 9552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1032-1400_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 244 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936116Jy sigma=0.051770 ! Fit after self-cal, rms=0.916397Jy sigma=0.051712 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.982 mas, bpa=-9.163 degrees ! Estimated noise=635.695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269553 Jy ! Component: 100 - total flux cleaned = 0.033464 Jy ! Total flux subtracted in 100 components = 0.033464 Jy ! Clean residual min=-0.017302 max=0.018113 Jy/beam ! Clean residual mean=0.000004 rms=0.005077 Jy/beam ! Combined flux in latest and established models = 0.033464 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.033464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124507Jy sigma=0.001696 ! Fit after self-cal, rms=0.124483Jy sigma=0.001686 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=10.08 mas, bpa=-7.32 degrees ! Estimated noise=539.314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00736863 Jy ! Component: 100 - total flux cleaned = 0.0063971 Jy ! Component: 150 - total flux cleaned = 0.00529842 Jy ! Component: 200 - total flux cleaned = 0.00431058 Jy ! Total flux subtracted in 200 components = 0.00431058 Jy ! Clean residual min=-0.017677 max=0.020125 Jy/beam ! Clean residual mean=-0.000047 rms=0.004647 Jy/beam ! Combined flux in latest and established models = 0.0377746 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 10 components and 0.0377746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119692Jy sigma=0.002003 ! Fit after self-cal, rms=0.119601Jy sigma=0.002003 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.57 FD 0.60 HN 1.54 KP 0.60 ! LA 0.61 MK 0.80 NL 0.65 OV 0.59 ! PT 0.63 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.59 FD 0.57 HN 0.76 KP 0.57 ! LA 0.57 MK 0.90 NL 0.73 OV 0.61 ! PT 0.61 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.59 FD 0.59 HN 0.78 KP 0.62 ! LA 0.59 MK 0.85 NL 0.71 OV 0.57 ! PT 0.62 SC 0.86 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.78 HN 0.84 KP 1.00* ! LA 17.33 MK 1.03 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.119601Jy sigma=0.002003 ! Fit after self-cal, rms=0.066238Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=8.713 mas, bpa=-3.034 degrees ! Estimated noise=523.916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000906067 Jy ! Component: 100 - total flux cleaned = 0.000942225 Jy ! Component: 150 - total flux cleaned = 0.00100049 Jy ! Component: 200 - total flux cleaned = 0.00102698 Jy ! Total flux subtracted in 200 components = 0.00102698 Jy ! Clean residual min=-0.001612 max=0.001890 Jy/beam ! Clean residual mean=-0.000000 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0388016 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.0388016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066169Jy sigma=0.000676 ! Fit after self-cal, rms=0.064977Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064977Jy sigma=0.000670 ! Fit after self-cal, rms=0.053935Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=8.776 mas, bpa=-3.401 degrees ! Estimated noise=510.658 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388447 Jy ! Component: 100 - total flux cleaned = 0.00035019 Jy ! Component: 150 - total flux cleaned = 0.000349511 Jy ! Component: 200 - total flux cleaned = 0.000364615 Jy ! Total flux subtracted in 200 components = 0.000364615 Jy ! Clean residual min=-0.001412 max=0.001366 Jy/beam ! Clean residual mean=0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0391662 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.0391662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053918Jy sigma=0.000662 ! Fit after self-cal, rms=0.053866Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.55094e-05 Jy ! Component: 100 - total flux cleaned = -0.000109405 Jy ! Component: 150 - total flux cleaned = -0.000125718 Jy ! Component: 200 - total flux cleaned = -0.00014055 Jy ! Total flux subtracted in 200 components = -0.00014055 Jy ! Clean residual min=-0.001359 max=0.001397 Jy/beam ! Clean residual mean=0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0390256 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0390256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053852Jy sigma=0.000661 ! Fit after self-cal, rms=0.053846Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053846Jy sigma=0.000661 ! Fit after self-cal, rms=0.053867Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=8.759 mas, bpa=-3.44 degrees ! Estimated noise=510.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320803 Jy ! Component: 100 - total flux cleaned = 0.000351539 Jy ! Component: 150 - total flux cleaned = 0.000379288 Jy ! Component: 200 - total flux cleaned = 0.000404763 Jy ! Total flux subtracted in 200 components = 0.000404763 Jy ! Clean residual min=-0.001317 max=0.001300 Jy/beam ! Clean residual mean=0.000003 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.0394304 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.0394304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053858Jy sigma=0.000660 ! Fit after self-cal, rms=0.053890Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07719e-05 Jy ! Component: 100 - total flux cleaned = -2.42847e-06 Jy ! Component: 150 - total flux cleaned = -3.00718e-06 Jy ! Component: 200 - total flux cleaned = -3.40426e-06 Jy ! Total flux subtracted in 200 components = -3.40426e-06 Jy ! Clean residual min=-0.001332 max=0.001274 Jy/beam ! Clean residual mean=0.000003 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.039427 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.039427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053883Jy sigma=0.000660 ! Fit after self-cal, rms=0.053879Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053879Jy sigma=0.000660 ! Fit after self-cal, rms=0.053836Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.313 mas, bmaj=15.53 mas, bpa=5.07 degrees ! Estimated noise=570.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000498631 Jy ! Component: 100 - total flux cleaned = 0.00071087 Jy ! Component: 150 - total flux cleaned = 0.000742336 Jy ! Component: 200 - total flux cleaned = 0.000765021 Jy ! Total flux subtracted in 200 components = 0.000765021 Jy ! Clean residual min=-0.001211 max=0.001255 Jy/beam ! Clean residual mean=0.000004 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.040192 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.040192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053835Jy sigma=0.000660 ! Fit after self-cal, rms=0.053844Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.05668e-05 Jy ! Component: 100 - total flux cleaned = 4.16964e-05 Jy ! Component: 150 - total flux cleaned = 6.12649e-05 Jy ! Component: 200 - total flux cleaned = 7.92128e-05 Jy ! Total flux subtracted in 200 components = 7.92128e-05 Jy ! Clean residual min=-0.001209 max=0.001258 Jy/beam ! Clean residual mean=0.000003 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0402712 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.0402712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053845Jy sigma=0.000660 ! Fit after self-cal, rms=0.053842Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=8.733 mas, bpa=-3.408 degrees ! Estimated noise=510.924 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.648 x 8.733 at -3.408 degrees (North through East) ! Clean map min=-0.0012844 max=0.042801 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=7.6 mas, bpa=-4.382 degrees ! Estimated noise=755.382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329785 Jy ! Component: 100 - total flux cleaned = 0.0391121 Jy ! Component: 150 - total flux cleaned = 0.0391052 Jy ! Component: 200 - total flux cleaned = 0.0389167 Jy ! Total flux subtracted in 200 components = 0.0389167 Jy ! Clean residual min=-0.002353 max=0.002338 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0389167 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0389167 Jy ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=8.733 mas, bpa=-3.408 degrees ! Estimated noise=510.924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000962101 Jy ! Component: 100 - total flux cleaned = 0.000859135 Jy ! Component: 150 - total flux cleaned = 0.000857127 Jy ! Component: 200 - total flux cleaned = 0.000857498 Jy ! Total flux subtracted in 200 components = 0.000857498 Jy ! Clean residual min=-0.001503 max=0.001313 Jy/beam ! Clean residual mean=0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0397742 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.0397742 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.313 mas, bmaj=15.53 mas, bpa=5.07 degrees ! Estimated noise=570.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453242 Jy ! Component: 100 - total flux cleaned = 0.000524727 Jy ! Component: 150 - total flux cleaned = 0.000525208 Jy ! Component: 200 - total flux cleaned = 0.000525743 Jy ! Total flux subtracted in 200 components = 0.000525743 Jy ! Clean residual min=-0.001385 max=0.001144 Jy/beam ! Clean residual mean=0.000002 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0403 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.2488e-05 Jy ! Component: 100 - total flux cleaned = 2.42575e-05 Jy ! Component: 150 - total flux cleaned = 3.5561e-05 Jy ! Component: 200 - total flux cleaned = 4.60213e-05 Jy ! Total flux subtracted in 200 components = 4.60213e-05 Jy ! Clean residual min=-0.001358 max=0.001154 Jy/beam ! Clean residual mean=0.000002 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.040346 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.040346 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=8.733 mas, bpa=-3.408 degrees ! Estimated noise=510.924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265992 Jy ! Component: 100 - total flux cleaned = -0.000265781 Jy ! Component: 150 - total flux cleaned = -0.000313681 Jy ! Component: 200 - total flux cleaned = -0.000355835 Jy ! Total flux subtracted in 200 components = -0.000355835 Jy ! Clean residual min=-0.001450 max=0.001304 Jy/beam ! Clean residual mean=0.000002 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0399901 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0399901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053885Jy sigma=0.000660 ! Fit after self-cal, rms=0.053898Jy sigma=0.000660 wmodel J1032-1400_S_2017_04_28_pus_map.mod ! Writing 35 model components to file: J1032-1400_S_2017_04_28_pus_map.mod wobs J1032-1400_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1032-1400_S_2017_04_28_pus_uvs.fits wwins J1032-1400_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J1032-1400_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000538196 Jy ! Component: 100 - total flux cleaned = -0.000790771 Jy ! Component: 150 - total flux cleaned = -0.000834525 Jy ! Component: 200 - total flux cleaned = -0.000876901 Jy ! Component: 250 - total flux cleaned = -0.000917134 Jy ! Component: 300 - total flux cleaned = -0.000878415 Jy ! Component: 350 - total flux cleaned = -0.000897742 Jy ! Component: 400 - total flux cleaned = -0.000934284 Jy ! Component: 450 - total flux cleaned = -0.000916006 Jy ! Component: 500 - total flux cleaned = -0.000845604 Jy ! Component: 550 - total flux cleaned = -0.000828334 Jy ! Component: 600 - total flux cleaned = -0.000811365 Jy ! Component: 650 - total flux cleaned = -0.000845001 Jy ! Component: 700 - total flux cleaned = -0.000861515 Jy ! Component: 750 - total flux cleaned = -0.000829346 Jy ! Component: 800 - total flux cleaned = -0.000797398 Jy ! Component: 850 - total flux cleaned = -0.000812965 Jy ! Component: 900 - total flux cleaned = -0.000812683 Jy ! Component: 950 - total flux cleaned = -0.000766797 Jy ! Component: 1000 - total flux cleaned = -0.000856704 Jy ! Component: 1050 - total flux cleaned = -0.00084158 Jy ! Component: 1100 - total flux cleaned = -0.000797579 Jy ! Component: 1150 - total flux cleaned = -0.000797473 Jy ! Component: 1200 - total flux cleaned = -0.000826042 Jy ! Component: 1250 - total flux cleaned = -0.000797943 Jy ! Component: 1300 - total flux cleaned = -0.000798267 Jy ! Component: 1350 - total flux cleaned = -0.000798413 Jy ! Component: 1400 - total flux cleaned = -0.000784885 Jy ! Component: 1450 - total flux cleaned = -0.000851738 Jy ! Component: 1500 - total flux cleaned = -0.000798811 Jy ! Component: 1550 - total flux cleaned = -0.000850886 Jy ! Component: 1600 - total flux cleaned = -0.000812078 Jy ! Component: 1650 - total flux cleaned = -0.000799415 Jy ! Component: 1700 - total flux cleaned = -0.000774184 Jy ! Component: 1750 - total flux cleaned = -0.000786718 Jy ! Component: 1800 - total flux cleaned = -0.000749448 Jy ! Component: 1850 - total flux cleaned = -0.000712531 Jy ! Component: 1900 - total flux cleaned = -0.000688266 Jy ! Component: 1950 - total flux cleaned = -0.000652322 Jy ! Component: 2000 - total flux cleaned = -0.000640532 Jy ! Component: 2050 - total flux cleaned = -0.000664045 Jy ! Component: 2100 - total flux cleaned = -0.000652291 Jy ! Component: 2150 - total flux cleaned = -0.000617547 Jy ! Component: 2200 - total flux cleaned = -0.000617676 Jy ! Component: 2250 - total flux cleaned = -0.00059489 Jy ! Component: 2300 - total flux cleaned = -0.000606387 Jy ! Component: 2350 - total flux cleaned = -0.000583765 Jy ! Component: 2400 - total flux cleaned = -0.000583804 Jy ! Component: 2450 - total flux cleaned = -0.000550684 Jy ! Component: 2500 - total flux cleaned = -0.000583535 Jy ! Component: 2550 - total flux cleaned = -0.000572792 Jy ! Component: 2600 - total flux cleaned = -0.000562035 Jy ! Component: 2650 - total flux cleaned = -0.000540558 Jy ! Component: 2700 - total flux cleaned = -0.000572402 Jy ! Component: 2750 - total flux cleaned = -0.000572328 Jy ! Component: 2800 - total flux cleaned = -0.00055139 Jy ! Component: 2850 - total flux cleaned = -0.000530682 Jy ! Component: 2900 - total flux cleaned = -0.000541033 Jy ! Component: 2950 - total flux cleaned = -0.000561589 Jy ! Component: 3000 - total flux cleaned = -0.000571708 Jy ! Component: 3050 - total flux cleaned = -0.000551432 Jy ! Component: 3100 - total flux cleaned = -0.000521335 Jy ! Component: 3150 - total flux cleaned = -0.000531348 Jy ! Component: 3200 - total flux cleaned = -0.000521504 Jy ! Component: 3250 - total flux cleaned = -0.00051175 Jy ! Component: 3300 - total flux cleaned = -0.000541192 Jy ! Component: 3350 - total flux cleaned = -0.000541213 Jy ! Component: 3400 - total flux cleaned = -0.000512224 Jy ! Component: 3450 - total flux cleaned = -0.000493039 Jy ! Component: 3500 - total flux cleaned = -0.000464367 Jy ! Component: 3550 - total flux cleaned = -0.000435962 Jy ! Component: 3600 - total flux cleaned = -0.000426582 Jy ! Component: 3650 - total flux cleaned = -0.000389139 Jy ! Component: 3700 - total flux cleaned = -0.000389183 Jy ! Component: 3750 - total flux cleaned = -0.000398296 Jy ! Component: 3800 - total flux cleaned = -0.000370646 Jy ! Component: 3850 - total flux cleaned = -0.000361389 Jy ! Component: 3900 - total flux cleaned = -0.000334066 Jy ! Component: 3950 - total flux cleaned = -0.000316053 Jy ! Component: 4000 - total flux cleaned = -0.000316076 Jy ! Component: 4050 - total flux cleaned = -0.000298326 Jy ! Total flux subtracted in 4096 components = -0.000307251 Jy ! Clean residual min=-0.000516 max=0.000507 Jy/beam ! Clean residual mean=0.000001 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.0396829 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 301 components and 0.0396829 Jy ![Exited script file: muppet] wmap "J1032-1400_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.648 x 8.733 at -3.408 degrees (North through East) ! Clean map min=-0.00099286 max=0.042152 Jy/beam ! Writing clean map to FITS file: J1032-1400_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.042152 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159689 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13652 1.13652 2.27304 4.54609 9.09217 18.1843 36.3687 72.7374 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.042 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.648 x 8.733 at -3.408 degrees (North through East) ! Clean map min=-0.00099286 max=0.042152 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1032-1400_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:23:01 2019