! Started logfile: J1028+2401_S_2017_02_24_pus_uvs.log on Sat May 4 11:24:17 2019 obs J1028+2401_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1028+2401_S_2017_02_24_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.846018 visibilities/baseline/integration-bin. ! Found source: J1028+2401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 17208 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1028+2401_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 434 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.829531Jy sigma=0.010618 ! Fit after self-cal, rms=0.823425Jy sigma=0.010573 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=5.875 mas, bpa=-2.647 degrees ! Estimated noise=831.102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131949 Jy ! Component: 100 - total flux cleaned = 0.161752 Jy ! Total flux subtracted in 100 components = 0.161752 Jy ! Clean residual min=-0.009396 max=0.010426 Jy/beam ! Clean residual mean=-0.000013 rms=0.002989 Jy/beam ! Combined flux in latest and established models = 0.161752 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.161752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082134Jy sigma=0.001311 ! Fit after self-cal, rms=0.082104Jy sigma=0.001311 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.917 mas, bmaj=6.82 mas, bpa=-1.557 degrees ! Estimated noise=600.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129207 Jy ! Component: 100 - total flux cleaned = 0.0184914 Jy ! Component: 150 - total flux cleaned = 0.0203985 Jy ! Component: 200 - total flux cleaned = 0.020399 Jy ! Total flux subtracted in 200 components = 0.020399 Jy ! Clean residual min=-0.008379 max=0.008790 Jy/beam ! Clean residual mean=-0.000017 rms=0.002819 Jy/beam ! Combined flux in latest and established models = 0.182151 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.182151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078747Jy sigma=0.001390 ! Fit after self-cal, rms=0.078708Jy sigma=0.001390 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 0.97 KP 0.93 ! LA 0.91 MK 0.97 NL 0.99 OV 1.00 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 1.04 KP 0.89 ! LA 0.90 MK 0.97 NL 0.92 OV 1.03 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.97 KP 0.99 ! LA 0.99 MK 1.00 NL 1.04 OV 0.96 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.94 KP 1.00* ! LA 9.21 MK 1.25 NL 1.00* OV 1.01 ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.078708Jy sigma=0.001390 ! Fit after self-cal, rms=0.336931Jy sigma=0.000722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=6.713 mas, bpa=-0.5969 degrees ! Estimated noise=612.402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00530746 Jy ! Component: 100 - total flux cleaned = 0.00772499 Jy ! Component: 150 - total flux cleaned = 0.00902268 Jy ! Component: 200 - total flux cleaned = 0.00980321 Jy ! Total flux subtracted in 200 components = 0.00980321 Jy ! Clean residual min=-0.003453 max=0.004083 Jy/beam ! Clean residual mean=-0.000008 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.191954 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.191954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335862Jy sigma=0.000723 ! Fit after self-cal, rms=0.336289Jy sigma=0.000721 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.336289Jy sigma=0.000721 ! Fit after self-cal, rms=0.237302Jy sigma=0.000705 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.824 mas, bmaj=6.697 mas, bpa=-0.4861 degrees ! Estimated noise=626.134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392494 Jy ! Component: 100 - total flux cleaned = 0.00582031 Jy ! Component: 150 - total flux cleaned = 0.00698506 Jy ! Component: 200 - total flux cleaned = 0.00775297 Jy ! Total flux subtracted in 200 components = 0.00775297 Jy ! Clean residual min=-0.003196 max=0.004074 Jy/beam ! Clean residual mean=-0.000006 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.199707 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 65 components and 0.199707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236639Jy sigma=0.000706 ! Fit after self-cal, rms=0.236608Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347957 Jy ! Component: 100 - total flux cleaned = 0.00518944 Jy ! Component: 150 - total flux cleaned = 0.00585497 Jy ! Component: 200 - total flux cleaned = 0.00611759 Jy ! Total flux subtracted in 200 components = 0.00611759 Jy ! Clean residual min=-0.003024 max=0.003262 Jy/beam ! Clean residual mean=-0.000005 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.205824 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 0.205824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236464Jy sigma=0.000705 ! Fit after self-cal, rms=0.236452Jy sigma=0.000705 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236452Jy sigma=0.000705 ! Fit after self-cal, rms=0.204101Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=6.691 mas, bpa=-0.4413 degrees ! Estimated noise=628.296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106697 Jy ! Component: 100 - total flux cleaned = 0.00132694 Jy ! Component: 150 - total flux cleaned = 0.00151098 Jy ! Component: 200 - total flux cleaned = 0.001619 Jy ! Total flux subtracted in 200 components = 0.001619 Jy ! Clean residual min=-0.002000 max=0.001925 Jy/beam ! Clean residual mean=0.000003 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.207443 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 123 components and 0.207443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204030Jy sigma=0.000676 ! Fit after self-cal, rms=0.203993Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295544 Jy ! Component: 100 - total flux cleaned = 0.0004391 Jy ! Component: 150 - total flux cleaned = 0.000482598 Jy ! Component: 200 - total flux cleaned = 0.0005623 Jy ! Total flux subtracted in 200 components = 0.0005623 Jy ! Clean residual min=-0.002005 max=0.001855 Jy/beam ! Clean residual mean=0.000003 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.208006 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 134 components and 0.208006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203964Jy sigma=0.000675 ! Fit after self-cal, rms=0.203964Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203964Jy sigma=0.000675 ! Fit after self-cal, rms=0.205104Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.363 mas, bmaj=9.847 mas, bpa=0.3205 degrees ! Estimated noise=766.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083166 Jy ! Component: 100 - total flux cleaned = 0.00087927 Jy ! Component: 150 - total flux cleaned = 0.000918221 Jy ! Component: 200 - total flux cleaned = 0.00093481 Jy ! Total flux subtracted in 200 components = 0.00093481 Jy ! Clean residual min=-0.002810 max=0.002461 Jy/beam ! Clean residual mean=0.000005 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.208941 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 147 components and 0.208941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205071Jy sigma=0.000675 ! Fit after self-cal, rms=0.205070Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62018e-05 Jy ! Component: 100 - total flux cleaned = 4.97886e-05 Jy ! Component: 150 - total flux cleaned = 5.06599e-05 Jy ! Component: 200 - total flux cleaned = 3.80153e-05 Jy ! Total flux subtracted in 200 components = 3.80153e-05 Jy ! Clean residual min=-0.002824 max=0.002461 Jy/beam ! Clean residual mean=0.000005 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.208979 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 161 components and 0.208979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205064Jy sigma=0.000675 ! Fit after self-cal, rms=0.205064Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=6.692 mas, bpa=-0.3477 degrees ! Estimated noise=629.825 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.82 x 6.692 at -0.3477 degrees (North through East) ! Clean map min=-0.0020269 max=0.17828 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=5.747 mas, bpa=-1.029 degrees ! Estimated noise=868.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137822 Jy ! Component: 100 - total flux cleaned = 0.170932 Jy ! Component: 150 - total flux cleaned = 0.184711 Jy ! Component: 200 - total flux cleaned = 0.191304 Jy ! Total flux subtracted in 200 components = 0.191304 Jy ! Clean residual min=-0.002730 max=0.003271 Jy/beam ! Clean residual mean=-0.000004 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.191304 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.191304 Jy ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=6.692 mas, bpa=-0.3477 degrees ! Estimated noise=629.825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520925 Jy ! Component: 100 - total flux cleaned = 0.00864058 Jy ! Component: 150 - total flux cleaned = 0.0111282 Jy ! Component: 200 - total flux cleaned = 0.0129766 Jy ! Total flux subtracted in 200 components = 0.0129766 Jy ! Clean residual min=-0.002116 max=0.002003 Jy/beam ! Clean residual mean=0.000000 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.204281 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 72 components and 0.204281 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.363 mas, bmaj=9.847 mas, bpa=0.3205 degrees ! Estimated noise=766.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205292 Jy ! Component: 100 - total flux cleaned = 0.0032628 Jy ! Component: 150 - total flux cleaned = 0.00391174 Jy ! Component: 200 - total flux cleaned = 0.00413309 Jy ! Total flux subtracted in 200 components = 0.00413309 Jy ! Clean residual min=-0.002887 max=0.002486 Jy/beam ! Clean residual mean=0.000004 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.208414 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.43127e-05 Jy ! Component: 100 - total flux cleaned = 0.000140397 Jy ! Component: 150 - total flux cleaned = 0.000190242 Jy ! Component: 200 - total flux cleaned = 0.000234934 Jy ! Total flux subtracted in 200 components = 0.000234934 Jy ! Clean residual min=-0.002855 max=0.002476 Jy/beam ! Clean residual mean=0.000004 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.208649 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 136 components and 0.208649 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=6.692 mas, bpa=-0.3477 degrees ! Estimated noise=629.825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035845 Jy ! Component: 100 - total flux cleaned = 0.000493606 Jy ! Component: 150 - total flux cleaned = 0.000518014 Jy ! Component: 200 - total flux cleaned = 0.000561968 Jy ! Total flux subtracted in 200 components = 0.000561968 Jy ! Clean residual min=-0.002045 max=0.001923 Jy/beam ! Clean residual mean=0.000003 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.209211 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 155 components and 0.209211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205042Jy sigma=0.000675 ! Fit after self-cal, rms=0.205041Jy sigma=0.000675 wmodel J1028+2401_S_2017_02_24_pus_map.mod ! Writing 155 model components to file: J1028+2401_S_2017_02_24_pus_map.mod wobs J1028+2401_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1028+2401_S_2017_02_24_pus_uvs.fits wwins J1028+2401_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J1028+2401_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000509546 Jy ! Component: 100 - total flux cleaned = -0.000864765 Jy ! Component: 150 - total flux cleaned = -0.00113423 Jy ! Component: 200 - total flux cleaned = -0.00133383 Jy ! Component: 250 - total flux cleaned = -0.00127914 Jy ! Component: 300 - total flux cleaned = -0.00130531 Jy ! Component: 350 - total flux cleaned = -0.0013567 Jy ! Component: 400 - total flux cleaned = -0.00135699 Jy ! Component: 450 - total flux cleaned = -0.00135754 Jy ! Component: 500 - total flux cleaned = -0.00138213 Jy ! Component: 550 - total flux cleaned = -0.00138232 Jy ! Component: 600 - total flux cleaned = -0.00138249 Jy ! Component: 650 - total flux cleaned = -0.00131334 Jy ! Component: 700 - total flux cleaned = -0.0013367 Jy ! Component: 750 - total flux cleaned = -0.00140415 Jy ! Component: 800 - total flux cleaned = -0.0013817 Jy ! Component: 850 - total flux cleaned = -0.00138133 Jy ! Component: 900 - total flux cleaned = -0.00135965 Jy ! Component: 950 - total flux cleaned = -0.00135931 Jy ! Component: 1000 - total flux cleaned = -0.0013592 Jy ! Component: 1050 - total flux cleaned = -0.00131736 Jy ! Component: 1100 - total flux cleaned = -0.0012764 Jy ! Component: 1150 - total flux cleaned = -0.00123601 Jy ! Component: 1200 - total flux cleaned = -0.00117616 Jy ! Component: 1250 - total flux cleaned = -0.00119571 Jy ! Component: 1300 - total flux cleaned = -0.00117599 Jy ! Component: 1350 - total flux cleaned = -0.00119487 Jy ! Component: 1400 - total flux cleaned = -0.00109931 Jy ! Component: 1450 - total flux cleaned = -0.00113737 Jy ! Component: 1500 - total flux cleaned = -0.0011375 Jy ! Component: 1550 - total flux cleaned = -0.00111871 Jy ! Component: 1600 - total flux cleaned = -0.00115549 Jy ! Component: 1650 - total flux cleaned = -0.00117336 Jy ! Component: 1700 - total flux cleaned = -0.00113714 Jy ! Component: 1750 - total flux cleaned = -0.00113719 Jy ! Component: 1800 - total flux cleaned = -0.00119054 Jy ! Component: 1850 - total flux cleaned = -0.00117298 Jy ! Component: 1900 - total flux cleaned = -0.00124268 Jy ! Component: 1950 - total flux cleaned = -0.00120804 Jy ! Component: 2000 - total flux cleaned = -0.00120829 Jy ! Component: 2050 - total flux cleaned = -0.00122539 Jy ! Component: 2100 - total flux cleaned = -0.00124211 Jy ! Component: 2150 - total flux cleaned = -0.00124193 Jy ! Component: 2200 - total flux cleaned = -0.0012419 Jy ! Component: 2250 - total flux cleaned = -0.00120883 Jy ! Component: 2300 - total flux cleaned = -0.00119215 Jy ! Component: 2350 - total flux cleaned = -0.00129027 Jy ! Component: 2400 - total flux cleaned = -0.00129023 Jy ! Component: 2450 - total flux cleaned = -0.00129012 Jy ! Component: 2500 - total flux cleaned = -0.00124218 Jy ! Component: 2550 - total flux cleaned = -0.00125825 Jy ! Component: 2600 - total flux cleaned = -0.00124265 Jy ! Component: 2650 - total flux cleaned = -0.00124262 Jy ! Component: 2700 - total flux cleaned = -0.00125833 Jy ! Component: 2750 - total flux cleaned = -0.00118096 Jy ! Component: 2800 - total flux cleaned = -0.00119636 Jy ! Component: 2850 - total flux cleaned = -0.00121158 Jy ! Component: 2900 - total flux cleaned = -0.00115077 Jy ! Component: 2950 - total flux cleaned = -0.00113551 Jy ! Component: 3000 - total flux cleaned = -0.00107534 Jy ! Component: 3050 - total flux cleaned = -0.0010604 Jy ! Component: 3100 - total flux cleaned = -0.00101591 Jy ! Component: 3150 - total flux cleaned = -0.0010307 Jy ! Component: 3200 - total flux cleaned = -0.00100127 Jy ! Component: 3250 - total flux cleaned = -0.000986818 Jy ! Component: 3300 - total flux cleaned = -0.000972236 Jy ! Component: 3350 - total flux cleaned = -0.000943414 Jy ! Component: 3400 - total flux cleaned = -0.00092907 Jy ! Component: 3450 - total flux cleaned = -0.000886177 Jy ! Component: 3500 - total flux cleaned = -0.000900406 Jy ! Component: 3550 - total flux cleaned = -0.000843807 Jy ! Component: 3600 - total flux cleaned = -0.000885915 Jy ! Component: 3650 - total flux cleaned = -0.000871869 Jy ! Component: 3700 - total flux cleaned = -0.000830101 Jy ! Component: 3750 - total flux cleaned = -0.000871601 Jy ! Component: 3800 - total flux cleaned = -0.00081642 Jy ! Component: 3850 - total flux cleaned = -0.000830132 Jy ! Component: 3900 - total flux cleaned = -0.000843681 Jy ! Component: 3950 - total flux cleaned = -0.000843673 Jy ! Component: 4000 - total flux cleaned = -0.00085726 Jy ! Component: 4050 - total flux cleaned = -0.0008842 Jy ! Total flux subtracted in 4096 components = -0.000870761 Jy ! Clean residual min=-0.000831 max=0.000799 Jy/beam ! Clean residual mean=0.000001 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.20834 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 487 components and 0.20834 Jy ![Exited script file: muppet] wmap "J1028+2401_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.82 x 6.692 at -0.3477 degrees (North through East) ! Clean map min=-0.0013961 max=0.17886 Jy/beam ! Writing clean map to FITS file: J1028+2401_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.178862 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000262474 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.440239 0.440239 0.880477 1.76095 3.52191 7.04382 14.0876 28.1753 56.3505 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.178 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.82 x 6.692 at -0.3477 degrees (North through East) ! Clean map min=-0.0013961 max=0.17886 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1028+2401_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:24:22 2019