! Started logfile: J1025-0509_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:45:47 2019 obs J1025-0509_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1025-0509_S_2017_05_31_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.949318 visibilities/baseline/integration-bin. ! Found source: J1025-0509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 19480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1025-0509_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 484 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.126890Jy sigma=0.006781 ! Fit after self-cal, rms=1.107974Jy sigma=0.006695 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=6.864 mas, bpa=-4.412 degrees ! Estimated noise=1079.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0858067 Jy ! Component: 100 - total flux cleaned = 0.104817 Jy ! Total flux subtracted in 100 components = 0.104817 Jy ! Clean residual min=-0.005816 max=0.008137 Jy/beam ! Clean residual mean=-0.000001 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.104817 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.104817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.750984Jy sigma=0.000715 ! Fit after self-cal, rms=0.750978Jy sigma=0.000715 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=8.063 mas, bpa=-4.348 degrees ! Estimated noise=790.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00863791 Jy ! Component: 100 - total flux cleaned = 0.0124724 Jy ! Component: 150 - total flux cleaned = 0.0144194 Jy ! Component: 200 - total flux cleaned = 0.0154921 Jy ! Total flux subtracted in 200 components = 0.0154921 Jy ! Clean residual min=-0.004976 max=0.004497 Jy/beam ! Clean residual mean=0.000003 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.120309 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 36 components and 0.120309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.750114Jy sigma=0.000713 ! Fit after self-cal, rms=0.750107Jy sigma=0.000713 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.90 HN 1.00 KP 1.03 ! LA 1.05 MK 1.00 NL 0.93 OV 1.06 ! PT 1.10 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.55 FD 0.94 HN 1.03 KP 0.99 ! LA 1.00 MK 1.04 NL 1.07 OV 1.10 ! PT 1.11 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.01 HN 0.99 KP 0.96 ! LA 1.02 MK 1.06 NL 0.99 OV 1.01 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.81 KP 0.62 ! LA 0.80 MK 1.19 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.750107Jy sigma=0.000713 ! Fit after self-cal, rms=0.943240Jy sigma=0.000706 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=8.153 mas, bpa=-4.442 degrees ! Estimated noise=812.635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234138 Jy ! Component: 100 - total flux cleaned = 0.00258939 Jy ! Component: 150 - total flux cleaned = 0.00263083 Jy ! Component: 200 - total flux cleaned = 0.00262725 Jy ! Total flux subtracted in 200 components = 0.00262725 Jy ! Clean residual min=-0.004445 max=0.003806 Jy/beam ! Clean residual mean=0.000006 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.122937 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.122937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.942874Jy sigma=0.000706 ! Fit after self-cal, rms=0.942881Jy sigma=0.000705 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.942881Jy sigma=0.000705 ! Fit after self-cal, rms=0.116695Jy sigma=0.000694 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.104 mas, bpa=-4.511 degrees ! Estimated noise=813.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835055 Jy ! Component: 100 - total flux cleaned = 0.000909183 Jy ! Component: 150 - total flux cleaned = 0.000942936 Jy ! Component: 200 - total flux cleaned = 0.000973446 Jy ! Total flux subtracted in 200 components = 0.000973446 Jy ! Clean residual min=-0.002612 max=0.002870 Jy/beam ! Clean residual mean=0.000003 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.12391 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.12391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116683Jy sigma=0.000694 ! Fit after self-cal, rms=0.116715Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025059 Jy ! Component: 100 - total flux cleaned = 0.00306167 Jy ! Component: 150 - total flux cleaned = 0.00319876 Jy ! Component: 200 - total flux cleaned = 0.00328853 Jy ! Total flux subtracted in 200 components = 0.00328853 Jy ! Clean residual min=-0.002383 max=0.002368 Jy/beam ! Clean residual mean=0.000004 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.127199 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.127199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116655Jy sigma=0.000693 ! Fit after self-cal, rms=0.116664Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116664Jy sigma=0.000693 ! Fit after self-cal, rms=0.115252Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=8.091 mas, bpa=-4.45 degrees ! Estimated noise=813.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291465 Jy ! Component: 100 - total flux cleaned = 0.000415767 Jy ! Component: 150 - total flux cleaned = 0.000527477 Jy ! Component: 200 - total flux cleaned = 0.000603876 Jy ! Total flux subtracted in 200 components = 0.000603876 Jy ! Clean residual min=-0.002573 max=0.002310 Jy/beam ! Clean residual mean=0.000003 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.127802 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.127802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115234Jy sigma=0.000692 ! Fit after self-cal, rms=0.115219Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267736 Jy ! Component: 100 - total flux cleaned = 0.000361314 Jy ! Component: 150 - total flux cleaned = 0.000383237 Jy ! Component: 200 - total flux cleaned = 0.000404691 Jy ! Total flux subtracted in 200 components = 0.000404691 Jy ! Clean residual min=-0.002498 max=0.002275 Jy/beam ! Clean residual mean=0.000003 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.128207 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 94 components and 0.128207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115207Jy sigma=0.000691 ! Fit after self-cal, rms=0.115208Jy sigma=0.000691 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115208Jy sigma=0.000691 ! Fit after self-cal, rms=0.115388Jy sigma=0.000691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.438 mas, bmaj=13.95 mas, bpa=-5.374 degrees ! Estimated noise=1050.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125057 Jy ! Component: 100 - total flux cleaned = 0.00150271 Jy ! Component: 150 - total flux cleaned = 0.00158374 Jy ! Component: 200 - total flux cleaned = 0.00166702 Jy ! Total flux subtracted in 200 components = 0.00166702 Jy ! Clean residual min=-0.002746 max=0.002732 Jy/beam ! Clean residual mean=0.000006 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.129874 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 99 components and 0.129874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115384Jy sigma=0.000691 ! Fit after self-cal, rms=0.115398Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.30563e-05 Jy ! Component: 100 - total flux cleaned = 4.24979e-05 Jy ! Component: 150 - total flux cleaned = 5.69832e-05 Jy ! Component: 200 - total flux cleaned = 5.70854e-05 Jy ! Total flux subtracted in 200 components = 5.70854e-05 Jy ! Clean residual min=-0.002741 max=0.002725 Jy/beam ! Clean residual mean=0.000006 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.129931 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 105 components and 0.129931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115399Jy sigma=0.000691 ! Fit after self-cal, rms=0.115398Jy sigma=0.000691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.083 mas, bpa=-4.424 degrees ! Estimated noise=815.452 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.083 at -4.424 degrees (North through East) ! Clean map min=-0.0024108 max=0.11419 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.656 mas, bmaj=6.856 mas, bpa=-4.613 degrees ! Estimated noise=1109.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0879534 Jy ! Component: 100 - total flux cleaned = 0.107787 Jy ! Component: 150 - total flux cleaned = 0.115281 Jy ! Component: 200 - total flux cleaned = 0.119851 Jy ! Total flux subtracted in 200 components = 0.119851 Jy ! Clean residual min=-0.003222 max=0.004395 Jy/beam ! Clean residual mean=0.000002 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.119851 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.119851 Jy ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.083 mas, bpa=-4.424 degrees ! Estimated noise=815.452 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434341 Jy ! Component: 100 - total flux cleaned = 0.00665636 Jy ! Component: 150 - total flux cleaned = 0.00829568 Jy ! Component: 200 - total flux cleaned = 0.00891372 Jy ! Total flux subtracted in 200 components = 0.00891372 Jy ! Clean residual min=-0.002665 max=0.002425 Jy/beam ! Clean residual mean=0.000003 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.128765 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 49 components and 0.128765 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.438 mas, bmaj=13.95 mas, bpa=-5.374 degrees ! Estimated noise=1050.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000631948 Jy ! Component: 100 - total flux cleaned = 0.000882374 Jy ! Component: 150 - total flux cleaned = 0.00105874 Jy ! Component: 200 - total flux cleaned = 0.00118007 Jy ! Total flux subtracted in 200 components = 0.00118007 Jy ! Clean residual min=-0.002731 max=0.002621 Jy/beam ! Clean residual mean=0.000005 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.129945 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.70242e-05 Jy ! Component: 100 - total flux cleaned = 2.60815e-05 Jy ! Component: 150 - total flux cleaned = -1.94747e-05 Jy ! Component: 200 - total flux cleaned = -4.0468e-05 Jy ! Total flux subtracted in 200 components = -4.0468e-05 Jy ! Clean residual min=-0.002699 max=0.002589 Jy/beam ! Clean residual mean=0.000005 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.129905 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 95 components and 0.129904 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.083 mas, bpa=-4.424 degrees ! Estimated noise=815.452 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000544778 Jy ! Component: 100 - total flux cleaned = -0.000582049 Jy ! Component: 150 - total flux cleaned = -0.000581744 Jy ! Component: 200 - total flux cleaned = -0.000470131 Jy ! Total flux subtracted in 200 components = -0.000470131 Jy ! Clean residual min=-0.002651 max=0.002069 Jy/beam ! Clean residual mean=0.000003 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.129434 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 0.129434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115345Jy sigma=0.000691 ! Fit after self-cal, rms=0.115333Jy sigma=0.000691 wmodel J1025-0509_S_2017_05_31_pus_map.mod ! Writing 115 model components to file: J1025-0509_S_2017_05_31_pus_map.mod wobs J1025-0509_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1025-0509_S_2017_05_31_pus_uvs.fits wwins J1025-0509_S_2017_05_31_pus_map.win ! wwins: Wrote 3 windows to J1025-0509_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000970746 Jy ! Component: 100 - total flux cleaned = -0.00112385 Jy ! Component: 150 - total flux cleaned = -0.00108951 Jy ! Component: 200 - total flux cleaned = -0.00102217 Jy ! Component: 250 - total flux cleaned = -0.000924039 Jy ! Component: 300 - total flux cleaned = -0.000796168 Jy ! Component: 350 - total flux cleaned = -0.000639961 Jy ! Component: 400 - total flux cleaned = -0.000578581 Jy ! Component: 450 - total flux cleaned = -0.000427635 Jy ! Component: 500 - total flux cleaned = -0.000221833 Jy ! Component: 550 - total flux cleaned = -0.000107518 Jy ! Component: 600 - total flux cleaned = -5.10247e-05 Jy ! Component: 650 - total flux cleaned = 0.000116416 Jy ! Component: 700 - total flux cleaned = 0.000226021 Jy ! Component: 750 - total flux cleaned = 0.000388786 Jy ! Component: 800 - total flux cleaned = 0.000575082 Jy ! Component: 850 - total flux cleaned = 0.000784663 Jy ! Component: 900 - total flux cleaned = 0.000888304 Jy ! Component: 950 - total flux cleaned = 0.00104101 Jy ! Component: 1000 - total flux cleaned = 0.00121669 Jy ! Component: 1050 - total flux cleaned = 0.00131552 Jy ! Component: 1100 - total flux cleaned = 0.00146215 Jy ! Component: 1150 - total flux cleaned = 0.00160713 Jy ! Component: 1200 - total flux cleaned = 0.00179826 Jy ! Component: 1250 - total flux cleaned = 0.00191621 Jy ! Component: 1300 - total flux cleaned = 0.00205597 Jy ! Component: 1350 - total flux cleaned = 0.00219435 Jy ! Component: 1400 - total flux cleaned = 0.00237662 Jy ! Component: 1450 - total flux cleaned = 0.00244409 Jy ! Component: 1500 - total flux cleaned = 0.00264513 Jy ! Component: 1550 - total flux cleaned = 0.00273348 Jy ! Component: 1600 - total flux cleaned = 0.0029523 Jy ! Component: 1650 - total flux cleaned = 0.00301693 Jy ! Component: 1700 - total flux cleaned = 0.00321032 Jy ! Component: 1750 - total flux cleaned = 0.00337997 Jy ! Component: 1800 - total flux cleaned = 0.00348511 Jy ! Component: 1850 - total flux cleaned = 0.00369313 Jy ! Component: 1900 - total flux cleaned = 0.00383754 Jy ! Component: 1950 - total flux cleaned = 0.00394024 Jy ! Component: 2000 - total flux cleaned = 0.00412242 Jy ! Component: 2050 - total flux cleaned = 0.00432316 Jy ! Component: 2100 - total flux cleaned = 0.00448207 Jy ! Component: 2150 - total flux cleaned = 0.0045805 Jy ! Component: 2200 - total flux cleaned = 0.00465827 Jy ! Component: 2250 - total flux cleaned = 0.00477428 Jy ! Component: 2300 - total flux cleaned = 0.00487021 Jy ! Component: 2350 - total flux cleaned = 0.00488946 Jy ! Component: 2400 - total flux cleaned = 0.00500288 Jy ! Component: 2450 - total flux cleaned = 0.00517204 Jy ! Component: 2500 - total flux cleaned = 0.00520909 Jy ! Component: 2550 - total flux cleaned = 0.00533834 Jy ! Component: 2600 - total flux cleaned = 0.00537503 Jy ! Component: 2650 - total flux cleaned = 0.00546586 Jy ! Component: 2700 - total flux cleaned = 0.00552013 Jy ! Component: 2750 - total flux cleaned = 0.0056635 Jy ! Component: 2800 - total flux cleaned = 0.00566344 Jy ! Component: 2850 - total flux cleaned = 0.00562841 Jy ! Component: 2900 - total flux cleaned = 0.00566346 Jy ! Component: 2950 - total flux cleaned = 0.00564584 Jy ! Component: 3000 - total flux cleaned = 0.00564588 Jy ! Component: 3050 - total flux cleaned = 0.0056975 Jy ! Component: 3100 - total flux cleaned = 0.00568036 Jy ! Component: 3150 - total flux cleaned = 0.00568034 Jy ! Component: 3200 - total flux cleaned = 0.00578178 Jy ! Component: 3250 - total flux cleaned = 0.00579851 Jy ! Component: 3300 - total flux cleaned = 0.00578193 Jy ! Component: 3350 - total flux cleaned = 0.00579825 Jy ! Component: 3400 - total flux cleaned = 0.00581468 Jy ! Component: 3450 - total flux cleaned = 0.00586387 Jy ! Component: 3500 - total flux cleaned = 0.00581516 Jy ! Component: 3550 - total flux cleaned = 0.00581531 Jy ! Component: 3600 - total flux cleaned = 0.0058313 Jy ! Component: 3650 - total flux cleaned = 0.00584737 Jy ! Component: 3700 - total flux cleaned = 0.00581553 Jy ! Component: 3750 - total flux cleaned = 0.00583137 Jy ! Component: 3800 - total flux cleaned = 0.00587837 Jy ! Component: 3850 - total flux cleaned = 0.00583149 Jy ! Component: 3900 - total flux cleaned = 0.00581591 Jy ! Component: 3950 - total flux cleaned = 0.00581579 Jy ! Component: 4000 - total flux cleaned = 0.00581581 Jy ! Component: 4050 - total flux cleaned = 0.005877 Jy ! Total flux subtracted in 4096 components = 0.00583147 Jy ! Clean residual min=-0.000892 max=0.000893 Jy/beam ! Clean residual mean=0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.135266 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 437 components and 0.135266 Jy ![Exited script file: muppet] wmap "J1025-0509_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.083 at -4.424 degrees (North through East) ! Clean map min=-0.0020484 max=0.11354 Jy/beam ! Writing clean map to FITS file: J1025-0509_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113541 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000292515 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.772888 0.772888 1.54578 3.09155 6.18311 12.3662 24.7324 49.4649 98.9297 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.083 at -4.424 degrees (North through East) ! Clean map min=-0.0020484 max=0.11354 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1025-0509_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:45:53 2019