! Started logfile: J1024+1912_S_2017_08_12_pus_uvs.log on Fri May 10 14:57:37 2019 obs J1024+1912_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1024+1912_S_2017_08_12_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.706667 visibilities/baseline/integration-bin. ! Found source: J1024+1912 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1024+1912_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.726878Jy sigma=0.006180 ! Fit after self-cal, rms=0.718317Jy sigma=0.006112 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=8.733 mas, bpa=-24.67 degrees ! Estimated noise=3581.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219271 Jy ! Component: 100 - total flux cleaned = 0.27788 Jy ! Total flux subtracted in 100 components = 0.27788 Jy ! Clean residual min=-0.020104 max=0.041181 Jy/beam ! Clean residual mean=-0.000102 rms=0.007017 Jy/beam ! Combined flux in latest and established models = 0.277881 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.277881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109193Jy sigma=0.000870 ! Fit after self-cal, rms=0.109037Jy sigma=0.000868 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.97 mas, bpa=-23.33 degrees ! Estimated noise=2941.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435734 Jy ! Component: 100 - total flux cleaned = 0.0689167 Jy ! Component: 150 - total flux cleaned = 0.0850205 Jy ! Component: 200 - total flux cleaned = 0.0962025 Jy ! Total flux subtracted in 200 components = 0.0962025 Jy ! Clean residual min=-0.010641 max=0.009126 Jy/beam ! Clean residual mean=-0.000012 rms=0.002658 Jy/beam ! Combined flux in latest and established models = 0.374083 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 30 components and 0.374083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088005Jy sigma=0.000691 ! Fit after self-cal, rms=0.087369Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* HN 0.93 KP 1.02 ! LA 1.01 MK 1.03 NL 0.87 OV 1.05 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.06 KP 0.95 ! LA 0.93 MK 1.00 NL 1.11 OV 1.05 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.05 ! LA 0.96 MK 0.99 NL 1.03 OV 0.95 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.087369Jy sigma=0.000686 ! Fit after self-cal, rms=0.079502Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=8.856 mas, bpa=-22.63 degrees ! Estimated noise=2892.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607001 Jy ! Component: 100 - total flux cleaned = 0.00697454 Jy ! Component: 150 - total flux cleaned = 0.00697524 Jy ! Component: 200 - total flux cleaned = 0.00697981 Jy ! Total flux subtracted in 200 components = 0.00697981 Jy ! Clean residual min=-0.007860 max=0.005952 Jy/beam ! Clean residual mean=0.000032 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.381063 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.381063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078846Jy sigma=0.000645 ! Fit after self-cal, rms=0.078791Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078791Jy sigma=0.000644 ! Fit after self-cal, rms=0.078509Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.83 mas, bpa=-22.57 degrees ! Estimated noise=2891.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273636 Jy ! Component: 100 - total flux cleaned = 0.00326169 Jy ! Component: 150 - total flux cleaned = 0.0033272 Jy ! Component: 200 - total flux cleaned = 0.00332809 Jy ! Total flux subtracted in 200 components = 0.00332809 Jy ! Clean residual min=-0.007346 max=0.005377 Jy/beam ! Clean residual mean=0.000034 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.384391 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.384391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078370Jy sigma=0.000643 ! Fit after self-cal, rms=0.078351Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325625 Jy ! Component: 100 - total flux cleaned = 0.000463447 Jy ! Component: 150 - total flux cleaned = 0.00050439 Jy ! Component: 200 - total flux cleaned = 0.000541336 Jy ! Total flux subtracted in 200 components = 0.000541336 Jy ! Clean residual min=-0.007254 max=0.005343 Jy/beam ! Clean residual mean=0.000036 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.384932 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.384932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078308Jy sigma=0.000642 ! Fit after self-cal, rms=0.078300Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078300Jy sigma=0.000642 ! Fit after self-cal, rms=0.078150Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.818 mas, bpa=-22.55 degrees ! Estimated noise=2890.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922148 Jy ! Component: 100 - total flux cleaned = 0.00125259 Jy ! Component: 150 - total flux cleaned = 0.00132512 Jy ! Component: 200 - total flux cleaned = 0.00132616 Jy ! Total flux subtracted in 200 components = 0.00132616 Jy ! Clean residual min=-0.007146 max=0.005209 Jy/beam ! Clean residual mean=0.000034 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.386258 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.386259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078113Jy sigma=0.000642 ! Fit after self-cal, rms=0.078105Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.22788e-05 Jy ! Component: 100 - total flux cleaned = 9.22244e-05 Jy ! Component: 150 - total flux cleaned = 9.27403e-05 Jy ! Component: 200 - total flux cleaned = 9.21414e-05 Jy ! Total flux subtracted in 200 components = 9.21414e-05 Jy ! Clean residual min=-0.007116 max=0.005194 Jy/beam ! Clean residual mean=0.000035 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 0.386351 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 97 components and 0.386351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078087Jy sigma=0.000642 ! Fit after self-cal, rms=0.078081Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078081Jy sigma=0.000642 ! Fit after self-cal, rms=0.077994Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.607 mas, bmaj=10.91 mas, bpa=-18.93 degrees ! Estimated noise=3523.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000397292 Jy ! Component: 100 - total flux cleaned = -0.000414978 Jy ! Component: 150 - total flux cleaned = -0.000498475 Jy ! Component: 200 - total flux cleaned = -0.000523721 Jy ! Total flux subtracted in 200 components = -0.000523721 Jy ! Clean residual min=-0.008674 max=0.006496 Jy/beam ! Clean residual mean=0.000060 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.385827 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 0.385827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077993Jy sigma=0.000642 ! Fit after self-cal, rms=0.077970Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265637 Jy ! Component: 100 - total flux cleaned = -0.000236592 Jy ! Component: 150 - total flux cleaned = -0.00026093 Jy ! Component: 200 - total flux cleaned = -0.000283284 Jy ! Total flux subtracted in 200 components = -0.000283284 Jy ! Clean residual min=-0.008521 max=0.006375 Jy/beam ! Clean residual mean=0.000058 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 0.385544 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 0.385544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077975Jy sigma=0.000641 ! Fit after self-cal, rms=0.077962Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.811 mas, bpa=-22.53 degrees ! Estimated noise=2888.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 8.811 at -22.53 degrees (North through East) ! Clean map min=-0.0068134 max=0.27976 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.863 mas, bmaj=8.535 mas, bpa=-24.03 degrees ! Estimated noise=3463.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213795 Jy ! Component: 100 - total flux cleaned = 0.272659 Jy ! Component: 150 - total flux cleaned = 0.308097 Jy ! Component: 200 - total flux cleaned = 0.33179 Jy ! Total flux subtracted in 200 components = 0.33179 Jy ! Clean residual min=-0.013061 max=0.012804 Jy/beam ! Clean residual mean=-0.000039 rms=0.003295 Jy/beam ! Combined flux in latest and established models = 0.33179 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.33179 Jy ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.811 mas, bpa=-22.53 degrees ! Estimated noise=2888.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194609 Jy ! Component: 100 - total flux cleaned = 0.0308641 Jy ! Component: 150 - total flux cleaned = 0.0380276 Jy ! Component: 200 - total flux cleaned = 0.0429915 Jy ! Total flux subtracted in 200 components = 0.0429915 Jy ! Clean residual min=-0.008362 max=0.005062 Jy/beam ! Clean residual mean=0.000005 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.374781 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 54 components and 0.374781 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.607 mas, bmaj=10.91 mas, bpa=-18.93 degrees ! Estimated noise=3523.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507201 Jy ! Component: 100 - total flux cleaned = 0.00777404 Jy ! Component: 150 - total flux cleaned = 0.00850284 Jy ! Component: 200 - total flux cleaned = 0.00886216 Jy ! Total flux subtracted in 200 components = 0.00886216 Jy ! Clean residual min=-0.009053 max=0.006445 Jy/beam ! Clean residual mean=0.000048 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.383643 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000318599 Jy ! Component: 100 - total flux cleaned = 0.000556907 Jy ! Component: 150 - total flux cleaned = 0.000815781 Jy ! Component: 200 - total flux cleaned = 0.00100873 Jy ! Total flux subtracted in 200 components = 0.00100873 Jy ! Clean residual min=-0.008821 max=0.006456 Jy/beam ! Clean residual mean=0.000053 rms=0.002051 Jy/beam ! Combined flux in latest and established models = 0.384652 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 102 components and 0.384652 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.811 mas, bpa=-22.53 degrees ! Estimated noise=2888.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118481 Jy ! Component: 100 - total flux cleaned = 0.00158354 Jy ! Component: 150 - total flux cleaned = 0.00178181 Jy ! Component: 200 - total flux cleaned = 0.00195097 Jy ! Total flux subtracted in 200 components = 0.00195097 Jy ! Clean residual min=-0.007266 max=0.005271 Jy/beam ! Clean residual mean=0.000031 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.386603 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 119 components and 0.386603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078118Jy sigma=0.000642 ! Fit after self-cal, rms=0.078104Jy sigma=0.000642 wmodel J1024+1912_S_2017_08_12_pus_map.mod ! Writing 119 model components to file: J1024+1912_S_2017_08_12_pus_map.mod wobs J1024+1912_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1024+1912_S_2017_08_12_pus_uvs.fits wwins J1024+1912_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1024+1912_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00284339 Jy ! Component: 100 - total flux cleaned = -0.00357601 Jy ! Component: 150 - total flux cleaned = -0.00333814 Jy ! Component: 200 - total flux cleaned = -0.00273647 Jy ! Component: 250 - total flux cleaned = -0.00238299 Jy ! Component: 300 - total flux cleaned = -0.00204695 Jy ! Component: 350 - total flux cleaned = -0.00192007 Jy ! Component: 400 - total flux cleaned = -0.0019805 Jy ! Component: 450 - total flux cleaned = -0.00203711 Jy ! Component: 500 - total flux cleaned = -0.00214903 Jy ! Component: 550 - total flux cleaned = -0.00220371 Jy ! Component: 600 - total flux cleaned = -0.00220554 Jy ! Component: 650 - total flux cleaned = -0.00225728 Jy ! Component: 700 - total flux cleaned = -0.00225579 Jy ! Component: 750 - total flux cleaned = -0.00220754 Jy ! Component: 800 - total flux cleaned = -0.00211335 Jy ! Component: 850 - total flux cleaned = -0.00211422 Jy ! Component: 900 - total flux cleaned = -0.00211546 Jy ! Component: 950 - total flux cleaned = -0.00220309 Jy ! Component: 1000 - total flux cleaned = -0.00220319 Jy ! Component: 1050 - total flux cleaned = -0.00220342 Jy ! Component: 1100 - total flux cleaned = -0.00195684 Jy ! Component: 1150 - total flux cleaned = -0.00179639 Jy ! Component: 1200 - total flux cleaned = -0.00167803 Jy ! Component: 1250 - total flux cleaned = -0.00148467 Jy ! Component: 1300 - total flux cleaned = -0.00133254 Jy ! Component: 1350 - total flux cleaned = -0.00114548 Jy ! Component: 1400 - total flux cleaned = -0.000925425 Jy ! Component: 1450 - total flux cleaned = -0.000744586 Jy ! Component: 1500 - total flux cleaned = -0.000566495 Jy ! Component: 1550 - total flux cleaned = -0.000355293 Jy ! Component: 1600 - total flux cleaned = -4.46807e-05 Jy ! Component: 1650 - total flux cleaned = 9.20529e-05 Jy ! Component: 1700 - total flux cleaned = 0.000327305 Jy ! Component: 1750 - total flux cleaned = 0.000492359 Jy ! Component: 1800 - total flux cleaned = 0.000753058 Jy ! Component: 1850 - total flux cleaned = 0.000946196 Jy ! Component: 1900 - total flux cleaned = 0.00120027 Jy ! Component: 1950 - total flux cleaned = 0.001389 Jy ! Component: 2000 - total flux cleaned = 0.00154497 Jy ! Component: 2050 - total flux cleaned = 0.00173023 Jy ! Component: 2100 - total flux cleaned = 0.00194446 Jy ! Component: 2150 - total flux cleaned = 0.002066 Jy ! Component: 2200 - total flux cleaned = 0.00224716 Jy ! Component: 2250 - total flux cleaned = 0.00242682 Jy ! Component: 2300 - total flux cleaned = 0.002516 Jy ! Component: 2350 - total flux cleaned = 0.00263451 Jy ! Component: 2400 - total flux cleaned = 0.00281119 Jy ! Component: 2450 - total flux cleaned = 0.00286974 Jy ! Component: 2500 - total flux cleaned = 0.00292829 Jy ! Component: 2550 - total flux cleaned = 0.00298627 Jy ! Component: 2600 - total flux cleaned = 0.00298648 Jy ! Component: 2650 - total flux cleaned = 0.0029865 Jy ! Component: 2700 - total flux cleaned = 0.0029865 Jy ! Component: 2750 - total flux cleaned = 0.0029579 Jy ! Component: 2800 - total flux cleaned = 0.00295775 Jy ! Component: 2850 - total flux cleaned = 0.0029007 Jy ! Component: 2900 - total flux cleaned = 0.00284385 Jy ! Component: 2950 - total flux cleaned = 0.00281538 Jy ! Component: 3000 - total flux cleaned = 0.00275849 Jy ! Component: 3050 - total flux cleaned = 0.0027585 Jy ! Component: 3100 - total flux cleaned = 0.00270171 Jy ! Component: 3150 - total flux cleaned = 0.00270155 Jy ! Component: 3200 - total flux cleaned = 0.0027585 Jy ! Component: 3250 - total flux cleaned = 0.00275848 Jy ! Component: 3300 - total flux cleaned = 0.00272989 Jy ! Component: 3350 - total flux cleaned = 0.00275862 Jy ! Component: 3400 - total flux cleaned = 0.00275868 Jy ! Component: 3450 - total flux cleaned = 0.00272986 Jy ! Component: 3500 - total flux cleaned = 0.00275897 Jy ! Component: 3550 - total flux cleaned = 0.0027881 Jy ! Component: 3600 - total flux cleaned = 0.00270075 Jy ! Component: 3650 - total flux cleaned = 0.00272989 Jy ! Component: 3700 - total flux cleaned = 0.00270061 Jy ! Component: 3750 - total flux cleaned = 0.00267059 Jy ! Component: 3800 - total flux cleaned = 0.00267021 Jy ! Component: 3850 - total flux cleaned = 0.00267016 Jy ! Component: 3900 - total flux cleaned = 0.00267016 Jy ! Component: 3950 - total flux cleaned = 0.00264 Jy ! Component: 4000 - total flux cleaned = 0.00263971 Jy ! Component: 4050 - total flux cleaned = 0.00263956 Jy ! Total flux subtracted in 4096 components = 0.00263924 Jy ! Clean residual min=-0.001851 max=0.001782 Jy/beam ! Clean residual mean=-0.000001 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.389242 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 372 components and 0.389242 Jy ![Exited script file: muppet] wmap "J1024+1912_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 8.811 at -22.53 degrees (North through East) ! Clean map min=-0.0073825 max=0.27899 Jy/beam ! Writing clean map to FITS file: J1024+1912_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.278994 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000522924 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.562296 0.562296 1.12459 2.24918 4.49837 8.99674 17.9935 35.9869 71.9739 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.278 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 8.811 at -22.53 degrees (North through East) ! Clean map min=-0.0073825 max=0.27899 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1024+1912_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:57:41 2019