! Started logfile: J1024+1912_S_2017_03_23_pus_uvs.log on Mon May 13 09:56:08 2019 obs J1024+1912_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1024+1912_S_2017_03_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672222 visibilities/baseline/integration-bin. ! Found source: J1024+1912 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1024+1912_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.721453Jy sigma=0.007410 ! Fit after self-cal, rms=0.714668Jy sigma=0.007348 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.504 mas, bmaj=7.084 mas, bpa=-6.505 degrees ! Estimated noise=2831.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219709 Jy ! Component: 100 - total flux cleaned = 0.273961 Jy ! Total flux subtracted in 100 components = 0.273961 Jy ! Clean residual min=-0.024229 max=0.040312 Jy/beam ! Clean residual mean=0.000257 rms=0.007735 Jy/beam ! Combined flux in latest and established models = 0.273961 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.273961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125956Jy sigma=0.001189 ! Fit after self-cal, rms=0.125954Jy sigma=0.001189 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.707 mas, bpa=-5.07 degrees ! Estimated noise=2470.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347775 Jy ! Component: 100 - total flux cleaned = 0.0509409 Jy ! Component: 150 - total flux cleaned = 0.0592242 Jy ! Component: 200 - total flux cleaned = 0.0614359 Jy ! Total flux subtracted in 200 components = 0.0614359 Jy ! Clean residual min=-0.023827 max=0.046207 Jy/beam ! Clean residual mean=0.000236 rms=0.008550 Jy/beam ! Combined flux in latest and established models = 0.335397 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.335397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115045Jy sigma=0.001110 ! Fit after self-cal, rms=0.114997Jy sigma=0.001109 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.92 KP 0.97 ! LA 0.91 MK 0.96 NL 1.12 OV 0.96 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.93 KP 0.96 ! LA 0.89 MK 0.94 NL 1.68 OV 0.98 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 0.91 KP 0.81 ! LA 0.71 MK 0.92 NL 2.08 OV 0.92 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.98 KP 1.00* ! LA 0.74 MK 1.36 NL 1.00* OV 3.02 ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.114997Jy sigma=0.001109 ! Fit after self-cal, rms=0.101643Jy sigma=0.000710 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=7.781 mas, bpa=-5.098 degrees ! Estimated noise=2442.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (54.5, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016385 Jy ! Component: 100 - total flux cleaned = 0.0221114 Jy ! Component: 150 - total flux cleaned = 0.0228278 Jy ! Component: 200 - total flux cleaned = 0.0232252 Jy ! Total flux subtracted in 200 components = 0.0232252 Jy ! Clean residual min=-0.008682 max=0.011075 Jy/beam ! Clean residual mean=-0.000006 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 0.358622 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.358622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098526Jy sigma=0.000672 ! Fit after self-cal, rms=0.098970Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098970Jy sigma=0.000669 ! Fit after self-cal, rms=0.097370Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.789 mas, bpa=-5.141 degrees ! Estimated noise=2422.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178469 Jy ! Component: 100 - total flux cleaned = 0.00196073 Jy ! Component: 150 - total flux cleaned = 0.00211328 Jy ! Component: 200 - total flux cleaned = 0.00238356 Jy ! Total flux subtracted in 200 components = 0.00238356 Jy ! Clean residual min=-0.008638 max=0.009831 Jy/beam ! Clean residual mean=-0.000011 rms=0.002081 Jy/beam ! Combined flux in latest and established models = 0.361006 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 0.361006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096745Jy sigma=0.000662 ! Fit after self-cal, rms=0.096710Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31.5, 104). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00699532 Jy ! Component: 100 - total flux cleaned = 0.00787566 Jy ! Component: 150 - total flux cleaned = 0.00914619 Jy ! Component: 200 - total flux cleaned = 0.00976684 Jy ! Total flux subtracted in 200 components = 0.00976684 Jy ! Clean residual min=-0.008005 max=0.007299 Jy/beam ! Clean residual mean=0.000006 rms=0.001759 Jy/beam ! Combined flux in latest and established models = 0.370773 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.370773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095586Jy sigma=0.000652 ! Fit after self-cal, rms=0.095498Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095498Jy sigma=0.000651 ! Fit after self-cal, rms=0.094889Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=7.798 mas, bpa=-5.165 degrees ! Estimated noise=2418.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000982178 Jy ! Component: 100 - total flux cleaned = 0.000865405 Jy ! Component: 150 - total flux cleaned = 0.00106678 Jy ! Component: 200 - total flux cleaned = 0.00115988 Jy ! Total flux subtracted in 200 components = 0.00115988 Jy ! Clean residual min=-0.007770 max=0.007042 Jy/beam ! Clean residual mean=-0.000001 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 0.371932 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 96 components and 0.371932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094587Jy sigma=0.000648 ! Fit after self-cal, rms=0.094572Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020943 Jy ! Component: 100 - total flux cleaned = -0.000120642 Jy ! Component: 150 - total flux cleaned = -0.000123653 Jy ! Component: 200 - total flux cleaned = -0.000281806 Jy ! Total flux subtracted in 200 components = -0.000281806 Jy ! Clean residual min=-0.007763 max=0.006987 Jy/beam ! Clean residual mean=-0.000001 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.371651 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 103 components and 0.371651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094385Jy sigma=0.000647 ! Fit after self-cal, rms=0.094380Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094380Jy sigma=0.000647 ! Fit after self-cal, rms=0.094271Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.234 mas, bmaj=10.8 mas, bpa=-2.263 degrees ! Estimated noise=3091.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196291 Jy ! Component: 100 - total flux cleaned = -0.00241308 Jy ! Component: 150 - total flux cleaned = -0.00300262 Jy ! Component: 200 - total flux cleaned = -0.00343624 Jy ! Total flux subtracted in 200 components = -0.00343624 Jy ! Clean residual min=-0.007264 max=0.005637 Jy/beam ! Clean residual mean=-0.000010 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.368214 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 118 components and 0.368214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094143Jy sigma=0.000647 ! Fit after self-cal, rms=0.094169Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000327836 Jy ! Component: 100 - total flux cleaned = -0.000669881 Jy ! Component: 150 - total flux cleaned = -0.000820637 Jy ! Component: 200 - total flux cleaned = -0.000895838 Jy ! Total flux subtracted in 200 components = -0.000895838 Jy ! Clean residual min=-0.006849 max=0.005441 Jy/beam ! Clean residual mean=-0.000008 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.367318 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 127 components and 0.367318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094096Jy sigma=0.000647 ! Fit after self-cal, rms=0.094138Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.806 mas, bpa=-5.19 degrees ! Estimated noise=2415.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.912 x 7.806 at -5.19 degrees (North through East) ! Clean map min=-0.0073309 max=0.28817 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=7.165 mas, bpa=-6.773 degrees ! Estimated noise=2764.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214299 Jy ! Component: 100 - total flux cleaned = 0.270566 Jy ! Component: 150 - total flux cleaned = 0.297679 Jy ! Component: 200 - total flux cleaned = 0.315259 Jy ! Total flux subtracted in 200 components = 0.315259 Jy ! Clean residual min=-0.010524 max=0.014985 Jy/beam ! Clean residual mean=0.000061 rms=0.003146 Jy/beam ! Combined flux in latest and established models = 0.315259 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.315259 Jy ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.806 mas, bpa=-5.19 degrees ! Estimated noise=2415.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194985 Jy ! Component: 100 - total flux cleaned = 0.0309503 Jy ! Component: 150 - total flux cleaned = 0.0382248 Jy ! Component: 200 - total flux cleaned = 0.0423415 Jy ! Total flux subtracted in 200 components = 0.0423415 Jy ! Clean residual min=-0.007740 max=0.008872 Jy/beam ! Clean residual mean=0.000015 rms=0.002035 Jy/beam ! Combined flux in latest and established models = 0.357601 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.357601 Jy ! Inverting map ! Added new window around map position (-48, -108). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720154 Jy ! Component: 100 - total flux cleaned = 0.00942563 Jy ! Component: 150 - total flux cleaned = 0.0115003 Jy ! Component: 200 - total flux cleaned = 0.0125169 Jy ! Total flux subtracted in 200 components = 0.0125169 Jy ! Clean residual min=-0.007141 max=0.005766 Jy/beam ! Clean residual mean=-0.000007 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.370118 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 0.370118 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.234 mas, bmaj=10.8 mas, bpa=-2.263 degrees ! Estimated noise=3091.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00269488 Jy ! Component: 100 - total flux cleaned = -0.00380582 Jy ! Component: 150 - total flux cleaned = -0.00478878 Jy ! Component: 200 - total flux cleaned = -0.00559057 Jy ! Total flux subtracted in 200 components = -0.00559057 Jy ! Clean residual min=-0.006108 max=0.004972 Jy/beam ! Clean residual mean=-0.000017 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.364527 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000645845 Jy ! Component: 100 - total flux cleaned = -0.00135427 Jy ! Component: 150 - total flux cleaned = -0.00211598 Jy ! Component: 200 - total flux cleaned = -0.00256596 Jy ! Total flux subtracted in 200 components = -0.00256596 Jy ! Clean residual min=-0.005507 max=0.004484 Jy/beam ! Clean residual mean=-0.000015 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.361961 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 104 components and 0.361961 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.806 mas, bpa=-5.19 degrees ! Estimated noise=2415.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145843 Jy ! Component: 100 - total flux cleaned = 0.00248815 Jy ! Component: 150 - total flux cleaned = 0.00248518 Jy ! Component: 200 - total flux cleaned = 0.00237741 Jy ! Total flux subtracted in 200 components = 0.00237741 Jy ! Clean residual min=-0.006854 max=0.005337 Jy/beam ! Clean residual mean=-0.000009 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.364339 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 130 components and 0.364339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093240Jy sigma=0.000640 ! Fit after self-cal, rms=0.093174Jy sigma=0.000639 wmodel J1024+1912_S_2017_03_23_pus_map.mod ! Writing 130 model components to file: J1024+1912_S_2017_03_23_pus_map.mod wobs J1024+1912_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1024+1912_S_2017_03_23_pus_uvs.fits wwins J1024+1912_S_2017_03_23_pus_map.win ! wwins: Wrote 5 windows to J1024+1912_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0025515 Jy ! Component: 100 - total flux cleaned = -0.00377662 Jy ! Component: 150 - total flux cleaned = -0.00447374 Jy ! Component: 200 - total flux cleaned = -0.00529581 Jy ! Component: 250 - total flux cleaned = -0.00608102 Jy ! Component: 300 - total flux cleaned = -0.00683139 Jy ! Component: 350 - total flux cleaned = -0.00748353 Jy ! Component: 400 - total flux cleaned = -0.00790171 Jy ! Component: 450 - total flux cleaned = -0.00830701 Jy ! Component: 500 - total flux cleaned = -0.00869784 Jy ! Component: 550 - total flux cleaned = -0.00901452 Jy ! Component: 600 - total flux cleaned = -0.00938168 Jy ! Component: 650 - total flux cleaned = -0.00967921 Jy ! Component: 700 - total flux cleaned = -0.0101432 Jy ! Component: 750 - total flux cleaned = -0.0104248 Jy ! Component: 800 - total flux cleaned = -0.0108107 Jy ! Component: 850 - total flux cleaned = -0.0111338 Jy ! Component: 900 - total flux cleaned = -0.0116603 Jy ! Component: 950 - total flux cleaned = -0.0117625 Jy ! Component: 1000 - total flux cleaned = -0.0119147 Jy ! Component: 1050 - total flux cleaned = -0.0120142 Jy ! Component: 1100 - total flux cleaned = -0.0120628 Jy ! Component: 1150 - total flux cleaned = -0.0120148 Jy ! Component: 1200 - total flux cleaned = -0.0119689 Jy ! Component: 1250 - total flux cleaned = -0.0121078 Jy ! Component: 1300 - total flux cleaned = -0.0119254 Jy ! Component: 1350 - total flux cleaned = -0.0118365 Jy ! Component: 1400 - total flux cleaned = -0.0118812 Jy ! Component: 1450 - total flux cleaned = -0.0117504 Jy ! Component: 1500 - total flux cleaned = -0.0116646 Jy ! Component: 1550 - total flux cleaned = -0.0115795 Jy ! Component: 1600 - total flux cleaned = -0.0115795 Jy ! Component: 1650 - total flux cleaned = -0.0113729 Jy ! Component: 1700 - total flux cleaned = -0.0114549 Jy ! Component: 1750 - total flux cleaned = -0.0112924 Jy ! Component: 1800 - total flux cleaned = -0.011172 Jy ! Component: 1850 - total flux cleaned = -0.0109335 Jy ! Component: 1900 - total flux cleaned = -0.0107367 Jy ! Component: 1950 - total flux cleaned = -0.01062 Jy ! Component: 2000 - total flux cleaned = -0.0103879 Jy ! Component: 2050 - total flux cleaned = -0.0101965 Jy ! Component: 2100 - total flux cleaned = -0.0100446 Jy ! Component: 2150 - total flux cleaned = -0.00985579 Jy ! Component: 2200 - total flux cleaned = -0.00959339 Jy ! Component: 2250 - total flux cleaned = -0.00929648 Jy ! Component: 2300 - total flux cleaned = -0.00922231 Jy ! Component: 2350 - total flux cleaned = -0.00907532 Jy ! Component: 2400 - total flux cleaned = -0.00892949 Jy ! Component: 2450 - total flux cleaned = -0.00882107 Jy ! Component: 2500 - total flux cleaned = -0.00874901 Jy ! Component: 2550 - total flux cleaned = -0.00860527 Jy ! Component: 2600 - total flux cleaned = -0.00849832 Jy ! Component: 2650 - total flux cleaned = -0.00846269 Jy ! Component: 2700 - total flux cleaned = -0.00835656 Jy ! Component: 2750 - total flux cleaned = -0.00828617 Jy ! Component: 2800 - total flux cleaned = -0.00828622 Jy ! Component: 2850 - total flux cleaned = -0.00828646 Jy ! Component: 2900 - total flux cleaned = -0.00828658 Jy ! Component: 2950 - total flux cleaned = -0.00835646 Jy ! Component: 3000 - total flux cleaned = -0.00832185 Jy ! Component: 3050 - total flux cleaned = -0.00832207 Jy ! Component: 3100 - total flux cleaned = -0.0082872 Jy ! Component: 3150 - total flux cleaned = -0.00835703 Jy ! Component: 3200 - total flux cleaned = -0.00825244 Jy ! Component: 3250 - total flux cleaned = -0.00828743 Jy ! Component: 3300 - total flux cleaned = -0.00828726 Jy ! Component: 3350 - total flux cleaned = -0.00835804 Jy ! Component: 3400 - total flux cleaned = -0.00842932 Jy ! Component: 3450 - total flux cleaned = -0.00842948 Jy ! Component: 3500 - total flux cleaned = -0.00850128 Jy ! Component: 3550 - total flux cleaned = -0.0084656 Jy ! Component: 3600 - total flux cleaned = -0.00850196 Jy ! Component: 3650 - total flux cleaned = -0.00846574 Jy ! Component: 3700 - total flux cleaned = -0.00853949 Jy ! Component: 3750 - total flux cleaned = -0.00853993 Jy ! Component: 3800 - total flux cleaned = -0.00865235 Jy ! Component: 3850 - total flux cleaned = -0.00876561 Jy ! Component: 3900 - total flux cleaned = -0.00880372 Jy ! Component: 3950 - total flux cleaned = -0.00891874 Jy ! Component: 4000 - total flux cleaned = -0.00903512 Jy ! Component: 4050 - total flux cleaned = -0.00915269 Jy ! Total flux subtracted in 4096 components = -0.00927139 Jy ! Clean residual min=-0.002592 max=0.002273 Jy/beam ! Clean residual mean=0.000007 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.355067 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 360 components and 0.355067 Jy ![Exited script file: muppet] wmap "J1024+1912_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.912 x 7.806 at -5.19 degrees (North through East) ! Clean map min=-0.0059531 max=0.28051 Jy/beam ! Writing clean map to FITS file: J1024+1912_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.280512 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000554315 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.592824 0.592824 1.18565 2.3713 4.7426 9.48519 18.9704 37.9408 75.8815 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.28 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.912 x 7.806 at -5.19 degrees (North through East) ! Clean map min=-0.0059531 max=0.28051 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1024+1912_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:56:13 2019