! Started logfile: J1022-1037_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:38:43 2019 obs J1022-1037_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1022-1037_S_2017_03_27_pus_uva.fits ! AN table 1: 217 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.980133 visibilities/baseline/integration-bin. ! Found source: J1022-1037 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 38284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1022-1037_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 707 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911165Jy sigma=0.007201 ! Fit after self-cal, rms=0.890608Jy sigma=0.007039 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.479 mas, bpa=-4.599 degrees ! Estimated noise=766.971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.071016 Jy ! Component: 100 - total flux cleaned = 0.109478 Jy ! Total flux subtracted in 100 components = 0.109478 Jy ! Clean residual min=-0.010716 max=0.031780 Jy/beam ! Clean residual mean=-0.000077 rms=0.004016 Jy/beam ! Combined flux in latest and established models = 0.109478 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.109478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149807Jy sigma=0.001233 ! Fit after self-cal, rms=0.149404Jy sigma=0.001230 ! Inverting map ! Added new window around map position (4, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337277 Jy ! Component: 100 - total flux cleaned = 0.0579176 Jy ! Total flux subtracted in 100 components = 0.0579176 Jy ! Clean residual min=-0.009312 max=0.024633 Jy/beam ! Clean residual mean=-0.000054 rms=0.003164 Jy/beam ! Combined flux in latest and established models = 0.167395 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 71 components and 0.167395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132203Jy sigma=0.001066 ! Fit after self-cal, rms=0.131400Jy sigma=0.001060 ! Inverting map ! Added new window around map position (-5, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236187 Jy ! Component: 100 - total flux cleaned = 0.0416676 Jy ! Total flux subtracted in 100 components = 0.0416676 Jy ! Clean residual min=-0.008314 max=0.015515 Jy/beam ! Clean residual mean=-0.000038 rms=0.002592 Jy/beam ! Combined flux in latest and established models = 0.209063 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 123 components and 0.209063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121163Jy sigma=0.000961 ! Fit after self-cal, rms=0.120961Jy sigma=0.000960 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=7.952 mas, bpa=-3.112 degrees ! Estimated noise=496.983 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0368226 Jy ! Component: 100 - total flux cleaned = 0.0633862 Jy ! Component: 150 - total flux cleaned = 0.0831383 Jy ! Component: 200 - total flux cleaned = 0.0979021 Jy ! Total flux subtracted in 200 components = 0.0979021 Jy ! Clean residual min=-0.010088 max=0.019419 Jy/beam ! Clean residual mean=-0.000002 rms=0.004610 Jy/beam ! Combined flux in latest and established models = 0.306965 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 174 components and 0.306965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107278Jy sigma=0.000818 ! Fit after self-cal, rms=0.106647Jy sigma=0.000814 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 0.94 HN 1.00 KP 0.96 ! LA 0.86 MK 1.17 NL 1.40 OV 1.19 ! PT 0.79 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 0.98 HN 0.94 KP 0.93 ! LA 0.84 MK 1.26 NL 1.41 OV 1.23 ! PT 0.78 SC 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.02 HN 0.98 KP 0.92 ! LA 0.86 MK 1.11 NL 1.38 OV 1.17 ! PT 0.76 SC 0.78 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 1.08 HN 0.71 KP 1.00* ! LA 0.80 MK 0.83 NL 1.00* OV 1.36 ! PT 0.78 SC 0.43 ! ! ! Fit before self-cal, rms=0.106647Jy sigma=0.000814 ! Fit after self-cal, rms=0.109818Jy sigma=0.000736 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=7.981 mas, bpa=-0.6035 degrees ! Estimated noise=486.361 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212331 Jy ! Component: 100 - total flux cleaned = 0.000279096 Jy ! Component: 150 - total flux cleaned = 0.000332228 Jy ! Component: 200 - total flux cleaned = 0.000386292 Jy ! Total flux subtracted in 200 components = 0.000386292 Jy ! Clean residual min=-0.006380 max=0.009780 Jy/beam ! Clean residual mean=-0.000013 rms=0.002075 Jy/beam ! Combined flux in latest and established models = 0.307351 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 183 components and 0.307351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109723Jy sigma=0.000735 ! Fit after self-cal, rms=0.110597Jy sigma=0.000733 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110597Jy sigma=0.000733 ! Fit after self-cal, rms=0.116248Jy sigma=0.000719 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=7.909 mas, bpa=0.4501 degrees ! Estimated noise=487.561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234986 Jy ! Component: 100 - total flux cleaned = 0.00300246 Jy ! Component: 150 - total flux cleaned = 0.00349556 Jy ! Component: 200 - total flux cleaned = 0.00379595 Jy ! Total flux subtracted in 200 components = 0.00379595 Jy ! Clean residual min=-0.005148 max=0.007968 Jy/beam ! Clean residual mean=-0.000000 rms=0.001754 Jy/beam ! Combined flux in latest and established models = 0.311147 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 193 components and 0.311147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116133Jy sigma=0.000718 ! Fit after self-cal, rms=0.116399Jy sigma=0.000718 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -45.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764957 Jy ! Component: 100 - total flux cleaned = 0.0118281 Jy ! Component: 150 - total flux cleaned = 0.0145751 Jy ! Component: 200 - total flux cleaned = 0.0160499 Jy ! Total flux subtracted in 200 components = 0.0160499 Jy ! Clean residual min=-0.005257 max=0.006462 Jy/beam ! Clean residual mean=-0.000007 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.327197 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 239 components and 0.327197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115805Jy sigma=0.000712 ! Fit after self-cal, rms=0.115677Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115677Jy sigma=0.000711 ! Fit after self-cal, rms=0.119816Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=7.924 mas, bpa=0.1159 degrees ! Estimated noise=482.656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249919 Jy ! Component: 100 - total flux cleaned = 0.00293226 Jy ! Component: 150 - total flux cleaned = 0.00330611 Jy ! Component: 200 - total flux cleaned = 0.00370046 Jy ! Total flux subtracted in 200 components = 0.00370046 Jy ! Clean residual min=-0.004725 max=0.006467 Jy/beam ! Clean residual mean=0.000000 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.330898 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 252 components and 0.330898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119648Jy sigma=0.000704 ! Fit after self-cal, rms=0.119732Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056822 Jy ! Component: 100 - total flux cleaned = 0.00711998 Jy ! Component: 150 - total flux cleaned = 0.00881436 Jy ! Component: 200 - total flux cleaned = 0.0104066 Jy ! Total flux subtracted in 200 components = 0.0104066 Jy ! Clean residual min=-0.004386 max=0.005462 Jy/beam ! Clean residual mean=-0.000003 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.341304 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 278 components and 0.341304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119293Jy sigma=0.000700 ! Fit after self-cal, rms=0.119183Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119183Jy sigma=0.000700 ! Fit after self-cal, rms=0.117786Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.593 mas, bmaj=14.25 mas, bpa=1.894 degrees ! Estimated noise=610.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419761 Jy ! Component: 100 - total flux cleaned = 0.0060296 Jy ! Component: 150 - total flux cleaned = 0.00749121 Jy ! Component: 200 - total flux cleaned = 0.00876266 Jy ! Total flux subtracted in 200 components = 0.00876266 Jy ! Clean residual min=-0.006466 max=0.006628 Jy/beam ! Clean residual mean=0.000001 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.350067 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 294 components and 0.350067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117636Jy sigma=0.000698 ! Fit after self-cal, rms=0.117553Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129275 Jy ! Component: 100 - total flux cleaned = 0.00174839 Jy ! Component: 150 - total flux cleaned = 0.00190704 Jy ! Component: 200 - total flux cleaned = 0.00198131 Jy ! Total flux subtracted in 200 components = 0.00198131 Jy ! Clean residual min=-0.006249 max=0.006311 Jy/beam ! Clean residual mean=0.000003 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 0.352048 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 305 components and 0.352048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117483Jy sigma=0.000698 ! Fit after self-cal, rms=0.117434Jy sigma=0.000697 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.913 mas, bpa=0.05356 degrees ! Estimated noise=477.289 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.172 x 7.913 at 0.05356 degrees (North through East) ! Clean map min=-0.006301 max=0.083318 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=6.402 mas, bpa=-1.538 degrees ! Estimated noise=738.786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0694116 Jy ! Component: 100 - total flux cleaned = 0.111258 Jy ! Component: 150 - total flux cleaned = 0.143121 Jy ! Component: 200 - total flux cleaned = 0.168813 Jy ! Total flux subtracted in 200 components = 0.168813 Jy ! Clean residual min=-0.009484 max=0.015385 Jy/beam ! Clean residual mean=-0.000050 rms=0.002624 Jy/beam ! Combined flux in latest and established models = 0.168813 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 94 model components to the UV plane model. ! The established model now contains 94 components and 0.168813 Jy ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.913 mas, bpa=0.05356 degrees ! Estimated noise=477.289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421654 Jy ! Component: 100 - total flux cleaned = 0.069928 Jy ! Component: 150 - total flux cleaned = 0.0891366 Jy ! Component: 200 - total flux cleaned = 0.102923 Jy ! Total flux subtracted in 200 components = 0.102923 Jy ! Clean residual min=-0.007894 max=0.010434 Jy/beam ! Clean residual mean=-0.000014 rms=0.002551 Jy/beam ! Combined flux in latest and established models = 0.271736 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 186 components and 0.271736 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.593 mas, bmaj=14.25 mas, bpa=1.894 degrees ! Estimated noise=610.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195005 Jy ! Component: 100 - total flux cleaned = 0.032467 Jy ! Component: 150 - total flux cleaned = 0.0427077 Jy ! Component: 200 - total flux cleaned = 0.0510511 Jy ! Total flux subtracted in 200 components = 0.0510511 Jy ! Clean residual min=-0.008263 max=0.009146 Jy/beam ! Clean residual mean=-0.000005 rms=0.002598 Jy/beam ! Combined flux in latest and established models = 0.322787 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555039 Jy ! Component: 100 - total flux cleaned = 0.00954479 Jy ! Component: 150 - total flux cleaned = 0.0129753 Jy ! Component: 200 - total flux cleaned = 0.0157723 Jy ! Total flux subtracted in 200 components = 0.0157723 Jy ! Clean residual min=-0.007107 max=0.006901 Jy/beam ! Clean residual mean=-0.000003 rms=0.002091 Jy/beam ! Combined flux in latest and established models = 0.338559 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 237 components and 0.338559 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.913 mas, bpa=0.05356 degrees ! Estimated noise=477.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345976 Jy ! Component: 100 - total flux cleaned = 0.00675857 Jy ! Component: 150 - total flux cleaned = 0.00891488 Jy ! Component: 200 - total flux cleaned = 0.0106502 Jy ! Total flux subtracted in 200 components = 0.0106502 Jy ! Clean residual min=-0.004780 max=0.005218 Jy/beam ! Clean residual mean=0.000000 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.349209 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 253 components and 0.349209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117792Jy sigma=0.000701 ! Fit after self-cal, rms=0.117630Jy sigma=0.000699 wmodel J1022-1037_S_2017_03_27_pus_map.mod ! Writing 253 model components to file: J1022-1037_S_2017_03_27_pus_map.mod wobs J1022-1037_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1022-1037_S_2017_03_27_pus_uvs.fits wwins J1022-1037_S_2017_03_27_pus_map.win ! wwins: Wrote 6 windows to J1022-1037_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102003 Jy ! Component: 100 - total flux cleaned = 0.00195683 Jy ! Component: 150 - total flux cleaned = 0.00232322 Jy ! Component: 200 - total flux cleaned = 0.00225357 Jy ! Component: 250 - total flux cleaned = 0.00205259 Jy ! Component: 300 - total flux cleaned = 0.00179087 Jy ! Component: 350 - total flux cleaned = 0.00166281 Jy ! Component: 400 - total flux cleaned = 0.00141501 Jy ! Component: 450 - total flux cleaned = 0.00135463 Jy ! Component: 500 - total flux cleaned = 0.00123651 Jy ! Component: 550 - total flux cleaned = 0.00112118 Jy ! Component: 600 - total flux cleaned = 0.00123509 Jy ! Component: 650 - total flux cleaned = 0.00112224 Jy ! Component: 700 - total flux cleaned = 0.00112154 Jy ! Component: 750 - total flux cleaned = 0.00117511 Jy ! Component: 800 - total flux cleaned = 0.00133428 Jy ! Component: 850 - total flux cleaned = 0.00133432 Jy ! Component: 900 - total flux cleaned = 0.00133549 Jy ! Component: 950 - total flux cleaned = 0.00153777 Jy ! Component: 1000 - total flux cleaned = 0.00138718 Jy ! Component: 1050 - total flux cleaned = 0.00138719 Jy ! Component: 1100 - total flux cleaned = 0.0014362 Jy ! Component: 1150 - total flux cleaned = 0.00143611 Jy ! Component: 1200 - total flux cleaned = 0.0013884 Jy ! Component: 1250 - total flux cleaned = 0.00124921 Jy ! Component: 1300 - total flux cleaned = 0.00111087 Jy ! Component: 1350 - total flux cleaned = 0.00101941 Jy ! Component: 1400 - total flux cleaned = 0.000929838 Jy ! Component: 1450 - total flux cleaned = 0.000751164 Jy ! Component: 1500 - total flux cleaned = 0.000442104 Jy ! Component: 1550 - total flux cleaned = 0.000311291 Jy ! Component: 1600 - total flux cleaned = 0.000224981 Jy ! Component: 1650 - total flux cleaned = 5.3968e-05 Jy ! Component: 1700 - total flux cleaned = -7.33017e-05 Jy ! Component: 1750 - total flux cleaned = -0.000156757 Jy ! Component: 1800 - total flux cleaned = -0.000281425 Jy ! Component: 1850 - total flux cleaned = -0.000445721 Jy ! Component: 1900 - total flux cleaned = -0.000526853 Jy ! Component: 1950 - total flux cleaned = -0.000526883 Jy ! Component: 2000 - total flux cleaned = -0.000647196 Jy ! Component: 2050 - total flux cleaned = -0.000647501 Jy ! Component: 2100 - total flux cleaned = -0.000805327 Jy ! Component: 2150 - total flux cleaned = -0.000999584 Jy ! Component: 2200 - total flux cleaned = -0.00115417 Jy ! Component: 2250 - total flux cleaned = -0.00126892 Jy ! Component: 2300 - total flux cleaned = -0.00138237 Jy ! Component: 2350 - total flux cleaned = -0.00164515 Jy ! Component: 2400 - total flux cleaned = -0.00179416 Jy ! Component: 2450 - total flux cleaned = -0.00183073 Jy ! Component: 2500 - total flux cleaned = -0.00194064 Jy ! Component: 2550 - total flux cleaned = -0.00190491 Jy ! Component: 2600 - total flux cleaned = -0.00212081 Jy ! Component: 2650 - total flux cleaned = -0.00208487 Jy ! Component: 2700 - total flux cleaned = -0.00215518 Jy ! Component: 2750 - total flux cleaned = -0.00229522 Jy ! Component: 2800 - total flux cleaned = -0.00226082 Jy ! Component: 2850 - total flux cleaned = -0.00226078 Jy ! Component: 2900 - total flux cleaned = -0.00243228 Jy ! Component: 2950 - total flux cleaned = -0.00250023 Jy ! Component: 3000 - total flux cleaned = -0.00250036 Jy ! Component: 3050 - total flux cleaned = -0.00256743 Jy ! Component: 3100 - total flux cleaned = -0.00260059 Jy ! Component: 3150 - total flux cleaned = -0.00260074 Jy ! Component: 3200 - total flux cleaned = -0.00276463 Jy ! Component: 3250 - total flux cleaned = -0.0029598 Jy ! Component: 3300 - total flux cleaned = -0.00283063 Jy ! Component: 3350 - total flux cleaned = -0.00286307 Jy ! Component: 3400 - total flux cleaned = -0.00295838 Jy ! Component: 3450 - total flux cleaned = -0.00311636 Jy ! Component: 3500 - total flux cleaned = -0.00308522 Jy ! Component: 3550 - total flux cleaned = -0.0031476 Jy ! Component: 3600 - total flux cleaned = -0.00308585 Jy ! Component: 3650 - total flux cleaned = -0.00336331 Jy ! Component: 3700 - total flux cleaned = -0.00342432 Jy ! Component: 3750 - total flux cleaned = -0.00351546 Jy ! Component: 3800 - total flux cleaned = -0.00342486 Jy ! Component: 3850 - total flux cleaned = -0.003605 Jy ! Component: 3900 - total flux cleaned = -0.00372414 Jy ! Component: 3950 - total flux cleaned = -0.00369453 Jy ! Component: 4000 - total flux cleaned = -0.00372374 Jy ! Component: 4050 - total flux cleaned = -0.00372368 Jy ! Total flux subtracted in 4096 components = -0.00389866 Jy ! Clean residual min=-0.001595 max=0.001840 Jy/beam ! Clean residual mean=-0.000004 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.345311 Jy keep ! Adding 401 model components to the UV plane model. ! The established model now contains 654 components and 0.345311 Jy ![Exited script file: muppet] wmap "J1022-1037_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.172 x 7.913 at 0.05356 degrees (North through East) ! Clean map min=-0.0037891 max=0.083665 Jy/beam ! Writing clean map to FITS file: J1022-1037_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0836653 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000604402 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.16721 2.16721 4.33442 8.66885 17.3377 34.6754 69.3508 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.172 x 7.913 at 0.05356 degrees (North through East) ! Clean map min=-0.0037891 max=0.083665 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1022-1037_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:38:49 2019