! Started logfile: J1022-0443_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:45:36 2019 obs J1022-0443_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1022-0443_S_2017_05_31_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.90078 visibilities/baseline/integration-bin. ! Found source: J1022-0443 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 18484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1022-0443_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960912Jy sigma=0.007315 ! Fit after self-cal, rms=0.934230Jy sigma=0.007168 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=6.953 mas, bpa=-4.317 degrees ! Estimated noise=1130.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539411 Jy ! Component: 100 - total flux cleaned = 0.0659289 Jy ! Total flux subtracted in 100 components = 0.0659289 Jy ! Clean residual min=-0.004127 max=0.004171 Jy/beam ! Clean residual mean=0.000004 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.0659289 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0659289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111491Jy sigma=0.000682 ! Fit after self-cal, rms=0.111130Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=8.126 mas, bpa=-3.033 degrees ! Estimated noise=783.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447841 Jy ! Component: 100 - total flux cleaned = 0.00653484 Jy ! Component: 150 - total flux cleaned = 0.00769331 Jy ! Component: 200 - total flux cleaned = 0.0079431 Jy ! Total flux subtracted in 200 components = 0.0079431 Jy ! Clean residual min=-0.002690 max=0.002646 Jy/beam ! Clean residual mean=0.000007 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.073872 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.073872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110806Jy sigma=0.000679 ! Fit after self-cal, rms=0.110803Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.90 HN 1.20 KP 0.99 ! LA 0.99 MK 1.00 NL 0.91 OV 0.97 ! PT 1.08 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.07 KP 1.28 ! LA 1.04 MK 0.95 NL 1.13 OV 1.18 ! PT 1.05 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.97 KP 1.00 ! LA 1.01 MK 1.04 NL 0.98 OV 0.93 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.85 KP 0.55 ! LA 0.73 MK 1.05 NL 1.00* OV 1.00* ! PT 0.77 SC 1.00* ! ! ! Fit before self-cal, rms=0.110803Jy sigma=0.000678 ! Fit after self-cal, rms=0.105467Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=8.14 mas, bpa=-3.072 degrees ! Estimated noise=787.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442728 Jy ! Component: 100 - total flux cleaned = 0.000540329 Jy ! Component: 150 - total flux cleaned = 0.000618005 Jy ! Component: 200 - total flux cleaned = 0.000651408 Jy ! Total flux subtracted in 200 components = 0.000651408 Jy ! Clean residual min=-0.002304 max=0.002477 Jy/beam ! Clean residual mean=0.000005 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0745234 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0745234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105447Jy sigma=0.000672 ! Fit after self-cal, rms=0.105488Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105488Jy sigma=0.000672 ! Fit after self-cal, rms=0.104089Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.273 mas, bmaj=8.129 mas, bpa=-3.102 degrees ! Estimated noise=790.178 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029201 Jy ! Component: 100 - total flux cleaned = 0.000364778 Jy ! Component: 150 - total flux cleaned = 0.000424844 Jy ! Component: 200 - total flux cleaned = 0.000425272 Jy ! Total flux subtracted in 200 components = 0.000425272 Jy ! Clean residual min=-0.002300 max=0.001999 Jy/beam ! Clean residual mean=0.000006 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0749487 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0749487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104081Jy sigma=0.000668 ! Fit after self-cal, rms=0.104197Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120586 Jy ! Component: 100 - total flux cleaned = -0.000122148 Jy ! Component: 150 - total flux cleaned = -0.00012235 Jy ! Component: 200 - total flux cleaned = -0.000133183 Jy ! Total flux subtracted in 200 components = -0.000133183 Jy ! Clean residual min=-0.002187 max=0.001987 Jy/beam ! Clean residual mean=0.000006 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0748155 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.0748155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104193Jy sigma=0.000668 ! Fit after self-cal, rms=0.104192Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104192Jy sigma=0.000668 ! Fit after self-cal, rms=0.104734Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=8.119 mas, bpa=-3.064 degrees ! Estimated noise=790.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.35289e-05 Jy ! Component: 100 - total flux cleaned = 8.97661e-05 Jy ! Component: 150 - total flux cleaned = 0.000100508 Jy ! Component: 200 - total flux cleaned = 0.000110704 Jy ! Total flux subtracted in 200 components = 0.000110704 Jy ! Clean residual min=-0.002198 max=0.001964 Jy/beam ! Clean residual mean=0.000004 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0749262 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0749262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104731Jy sigma=0.000665 ! Fit after self-cal, rms=0.104791Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.24551e-05 Jy ! Component: 100 - total flux cleaned = -4.16696e-05 Jy ! Component: 150 - total flux cleaned = -4.19056e-05 Jy ! Component: 200 - total flux cleaned = -3.20904e-05 Jy ! Total flux subtracted in 200 components = -3.20904e-05 Jy ! Clean residual min=-0.002205 max=0.001815 Jy/beam ! Clean residual mean=0.000004 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0748941 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.0748941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104788Jy sigma=0.000664 ! Fit after self-cal, rms=0.104787Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104787Jy sigma=0.000664 ! Fit after self-cal, rms=0.105401Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.601 mas, bmaj=13.93 mas, bpa=-2.805 degrees ! Estimated noise=995.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432566 Jy ! Component: 100 - total flux cleaned = 0.000451806 Jy ! Component: 150 - total flux cleaned = 0.000465603 Jy ! Component: 200 - total flux cleaned = 0.000471036 Jy ! Total flux subtracted in 200 components = 0.000471036 Jy ! Clean residual min=-0.002446 max=0.002387 Jy/beam ! Clean residual mean=0.000010 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0753651 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0753651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105402Jy sigma=0.000664 ! Fit after self-cal, rms=0.105457Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.37922e-05 Jy ! Component: 100 - total flux cleaned = -5.98009e-05 Jy ! Component: 150 - total flux cleaned = -5.39228e-05 Jy ! Component: 200 - total flux cleaned = -4.87354e-05 Jy ! Total flux subtracted in 200 components = -4.87354e-05 Jy ! Clean residual min=-0.002429 max=0.002304 Jy/beam ! Clean residual mean=0.000009 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0753164 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0753164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105459Jy sigma=0.000664 ! Fit after self-cal, rms=0.105458Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=8.111 mas, bpa=-3.025 degrees ! Estimated noise=791.562 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 8.111 at -3.025 degrees (North through East) ! Clean map min=-0.0022511 max=0.069722 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=6.997 mas, bpa=-4.231 degrees ! Estimated noise=1118.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0533401 Jy ! Component: 100 - total flux cleaned = 0.0656082 Jy ! Component: 150 - total flux cleaned = 0.070136 Jy ! Component: 200 - total flux cleaned = 0.0712952 Jy ! Total flux subtracted in 200 components = 0.0712952 Jy ! Clean residual min=-0.003041 max=0.003198 Jy/beam ! Clean residual mean=0.000002 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.0712953 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0712953 Jy ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=8.111 mas, bpa=-3.025 degrees ! Estimated noise=791.562 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222523 Jy ! Component: 100 - total flux cleaned = 0.00278618 Jy ! Component: 150 - total flux cleaned = 0.002973 Jy ! Component: 200 - total flux cleaned = 0.00312669 Jy ! Total flux subtracted in 200 components = 0.00312669 Jy ! Clean residual min=-0.002267 max=0.001782 Jy/beam ! Clean residual mean=0.000004 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0744219 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0744219 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.601 mas, bmaj=13.93 mas, bpa=-2.805 degrees ! Estimated noise=995.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00079302 Jy ! Component: 100 - total flux cleaned = 0.000850058 Jy ! Component: 150 - total flux cleaned = 0.000861018 Jy ! Component: 200 - total flux cleaned = 0.000879479 Jy ! Total flux subtracted in 200 components = 0.000879479 Jy ! Clean residual min=-0.002442 max=0.002298 Jy/beam ! Clean residual mean=0.000009 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0753014 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.57351e-05 Jy ! Component: 100 - total flux cleaned = 1.61055e-05 Jy ! Component: 150 - total flux cleaned = 1.57326e-05 Jy ! Component: 200 - total flux cleaned = 1.53744e-05 Jy ! Total flux subtracted in 200 components = 1.53744e-05 Jy ! Clean residual min=-0.002435 max=0.002307 Jy/beam ! Clean residual mean=0.000009 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0753168 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0753168 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=8.111 mas, bpa=-3.025 degrees ! Estimated noise=791.562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328251 Jy ! Component: 100 - total flux cleaned = -0.000361982 Jy ! Component: 150 - total flux cleaned = -0.000376634 Jy ! Component: 200 - total flux cleaned = -0.000376228 Jy ! Total flux subtracted in 200 components = -0.000376228 Jy ! Clean residual min=-0.002245 max=0.001789 Jy/beam ! Clean residual mean=0.000004 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0749406 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0749406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105465Jy sigma=0.000664 ! Fit after self-cal, rms=0.105470Jy sigma=0.000664 wmodel J1022-0443_S_2017_05_31_pus_map.mod ! Writing 38 model components to file: J1022-0443_S_2017_05_31_pus_map.mod wobs J1022-0443_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1022-0443_S_2017_05_31_pus_uvs.fits wwins J1022-0443_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1022-0443_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000561023 Jy ! Component: 100 - total flux cleaned = -0.000623076 Jy ! Component: 150 - total flux cleaned = -0.000714657 Jy ! Component: 200 - total flux cleaned = -0.000773756 Jy ! Component: 250 - total flux cleaned = -0.000831067 Jy ! Component: 300 - total flux cleaned = -0.000831758 Jy ! Component: 350 - total flux cleaned = -0.000885828 Jy ! Component: 400 - total flux cleaned = -0.000806642 Jy ! Component: 450 - total flux cleaned = -0.000807083 Jy ! Component: 500 - total flux cleaned = -0.00075691 Jy ! Component: 550 - total flux cleaned = -0.000732335 Jy ! Component: 600 - total flux cleaned = -0.00075681 Jy ! Component: 650 - total flux cleaned = -0.000684563 Jy ! Component: 700 - total flux cleaned = -0.000660988 Jy ! Component: 750 - total flux cleaned = -0.000591551 Jy ! Component: 800 - total flux cleaned = -0.000614778 Jy ! Component: 850 - total flux cleaned = -0.000569702 Jy ! Component: 900 - total flux cleaned = -0.000503247 Jy ! Component: 950 - total flux cleaned = -0.000503061 Jy ! Component: 1000 - total flux cleaned = -0.000394702 Jy ! Component: 1050 - total flux cleaned = -0.000395114 Jy ! Component: 1100 - total flux cleaned = -0.000373897 Jy ! Component: 1150 - total flux cleaned = -0.000249036 Jy ! Component: 1200 - total flux cleaned = -0.000249084 Jy ! Component: 1250 - total flux cleaned = -0.000208104 Jy ! Component: 1300 - total flux cleaned = -0.000167303 Jy ! Component: 1350 - total flux cleaned = -6.72508e-05 Jy ! Component: 1400 - total flux cleaned = 1.17102e-05 Jy ! Component: 1450 - total flux cleaned = 7.02405e-05 Jy ! Component: 1500 - total flux cleaned = 0.000147578 Jy ! Component: 1550 - total flux cleaned = 0.000223779 Jy ! Component: 1600 - total flux cleaned = 0.000242872 Jy ! Component: 1650 - total flux cleaned = 0.000318104 Jy ! Component: 1700 - total flux cleaned = 0.000336581 Jy ! Component: 1750 - total flux cleaned = 0.000446937 Jy ! Component: 1800 - total flux cleaned = 0.000537878 Jy ! Component: 1850 - total flux cleaned = 0.000592033 Jy ! Component: 1900 - total flux cleaned = 0.000717402 Jy ! Component: 1950 - total flux cleaned = 0.000788261 Jy ! Component: 2000 - total flux cleaned = 0.000876121 Jy ! Component: 2050 - total flux cleaned = 0.000980714 Jy ! Component: 2100 - total flux cleaned = 0.00104998 Jy ! Component: 2150 - total flux cleaned = 0.00120422 Jy ! Component: 2200 - total flux cleaned = 0.00130635 Jy ! Component: 2250 - total flux cleaned = 0.00135689 Jy ! Component: 2300 - total flux cleaned = 0.00154116 Jy ! Component: 2350 - total flux cleaned = 0.00164114 Jy ! Component: 2400 - total flux cleaned = 0.00183904 Jy ! Component: 2450 - total flux cleaned = 0.0019374 Jy ! Component: 2500 - total flux cleaned = 0.00201882 Jy ! Component: 2550 - total flux cleaned = 0.00216423 Jy ! Component: 2600 - total flux cleaned = 0.00230862 Jy ! Component: 2650 - total flux cleaned = 0.00240399 Jy ! Component: 2700 - total flux cleaned = 0.00249875 Jy ! Component: 2750 - total flux cleaned = 0.00259305 Jy ! Component: 2800 - total flux cleaned = 0.00270224 Jy ! Component: 2850 - total flux cleaned = 0.00285728 Jy ! Component: 2900 - total flux cleaned = 0.00290357 Jy ! Component: 2950 - total flux cleaned = 0.003026 Jy ! Component: 3000 - total flux cleaned = 0.00314742 Jy ! Component: 3050 - total flux cleaned = 0.00325304 Jy ! Component: 3100 - total flux cleaned = 0.00338788 Jy ! Component: 3150 - total flux cleaned = 0.00350712 Jy ! Component: 3200 - total flux cleaned = 0.00356633 Jy ! Component: 3250 - total flux cleaned = 0.00365473 Jy ! Component: 3300 - total flux cleaned = 0.00377193 Jy ! Component: 3350 - total flux cleaned = 0.00391718 Jy ! Component: 3400 - total flux cleaned = 0.00404692 Jy ! Component: 3450 - total flux cleaned = 0.00416161 Jy ! Component: 3500 - total flux cleaned = 0.00426124 Jy ! Component: 3550 - total flux cleaned = 0.00430391 Jy ! Component: 3600 - total flux cleaned = 0.00445882 Jy ! Component: 3650 - total flux cleaned = 0.00455689 Jy ! Component: 3700 - total flux cleaned = 0.0046264 Jy ! Component: 3750 - total flux cleaned = 0.00477856 Jy ! Component: 3800 - total flux cleaned = 0.00492972 Jy ! Component: 3850 - total flux cleaned = 0.00494332 Jy ! Component: 3900 - total flux cleaned = 0.00503843 Jy ! Component: 3950 - total flux cleaned = 0.00511953 Jy ! Component: 4000 - total flux cleaned = 0.00522713 Jy ! Component: 4050 - total flux cleaned = 0.00536093 Jy ! Total flux subtracted in 4096 components = 0.00546727 Jy ! Clean residual min=-0.000789 max=0.000867 Jy/beam ! Clean residual mean=0.000001 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.0804078 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 331 components and 0.0804078 Jy ![Exited script file: muppet] wmap "J1022-0443_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 8.111 at -3.025 degrees (North through East) ! Clean map min=-0.0016286 max=0.069621 Jy/beam ! Writing clean map to FITS file: J1022-0443_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0696211 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00024457 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05386 1.05386 2.10772 4.21544 8.43088 16.8618 33.7235 67.4471 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 8.111 at -3.025 degrees (North through East) ! Clean map min=-0.0016286 max=0.069621 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1022-0443_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:45:41 2019