! Started logfile: J1019-2708_S_2017_08_05_pus_uvs.log on Thu May 9 19:26:53 2019 obs J1019-2708_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1019-2708_S_2017_08_05_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.751587 visibilities/baseline/integration-bin. ! Found source: J1019-2708 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 7576 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1019-2708_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 368 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.892272Jy sigma=0.006220 ! Fit after self-cal, rms=0.876087Jy sigma=0.006119 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.321 mas, bmaj=6.859 mas, bpa=-7.389 degrees ! Estimated noise=1805.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.095778 Jy ! Component: 100 - total flux cleaned = 0.118306 Jy ! Total flux subtracted in 100 components = 0.118306 Jy ! Clean residual min=-0.006567 max=0.010006 Jy/beam ! Clean residual mean=-0.000005 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 0.118306 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.118306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106903Jy sigma=0.000688 ! Fit after self-cal, rms=0.106916Jy sigma=0.000688 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.909 mas, bpa=-7.483 degrees ! Estimated noise=1381.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159185 Jy ! Component: 100 - total flux cleaned = 0.0245522 Jy ! Component: 150 - total flux cleaned = 0.0295044 Jy ! Component: 200 - total flux cleaned = 0.0323487 Jy ! Total flux subtracted in 200 components = 0.0323487 Jy ! Clean residual min=-0.004867 max=0.004586 Jy/beam ! Clean residual mean=-0.000031 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.150655 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 49 components and 0.150655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104503Jy sigma=0.000671 ! Fit after self-cal, rms=0.104534Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.27 KP 1.07 ! LA 0.97 MK 1.09 NL 0.85 OV 1.03 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.20 KP 1.04 ! LA 0.97 MK 0.96 NL 1.05 OV 1.01 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.86 ! LA 0.75 MK 1.02 NL 1.14 OV 0.96 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.05 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.104534Jy sigma=0.000671 ! Fit after self-cal, rms=0.107125Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=7.899 mas, bpa=-7.15 degrees ! Estimated noise=1393.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73644e-05 Jy ! Component: 100 - total flux cleaned = -2.32679e-05 Jy ! Component: 150 - total flux cleaned = -5.40952e-05 Jy ! Component: 200 - total flux cleaned = -0.000105806 Jy ! Total flux subtracted in 200 components = -0.000105806 Jy ! Clean residual min=-0.003596 max=0.003799 Jy/beam ! Clean residual mean=-0.000023 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.150549 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.150549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107093Jy sigma=0.000662 ! Fit after self-cal, rms=0.107184Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107184Jy sigma=0.000662 ! Fit after self-cal, rms=0.108536Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=7.882 mas, bpa=-7.031 degrees ! Estimated noise=1395.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341719 Jy ! Component: 100 - total flux cleaned = 0.000345632 Jy ! Component: 150 - total flux cleaned = 0.000347511 Jy ! Component: 200 - total flux cleaned = 0.000309335 Jy ! Total flux subtracted in 200 components = 0.000309335 Jy ! Clean residual min=-0.003415 max=0.003380 Jy/beam ! Clean residual mean=-0.000022 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.150858 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.150858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108521Jy sigma=0.000660 ! Fit after self-cal, rms=0.108561Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.92325e-05 Jy ! Component: 100 - total flux cleaned = -9.37121e-05 Jy ! Component: 150 - total flux cleaned = -0.000125374 Jy ! Component: 200 - total flux cleaned = -0.000140423 Jy ! Total flux subtracted in 200 components = -0.000140423 Jy ! Clean residual min=-0.003410 max=0.003424 Jy/beam ! Clean residual mean=-0.000022 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.150718 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.150718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108555Jy sigma=0.000660 ! Fit after self-cal, rms=0.108556Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108556Jy sigma=0.000660 ! Fit after self-cal, rms=0.109215Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=7.863 mas, bpa=-6.999 degrees ! Estimated noise=1392.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143414 Jy ! Component: 100 - total flux cleaned = 0.000113243 Jy ! Component: 150 - total flux cleaned = 8.44896e-05 Jy ! Component: 200 - total flux cleaned = 7.18516e-05 Jy ! Total flux subtracted in 200 components = 7.18516e-05 Jy ! Clean residual min=-0.003320 max=0.003361 Jy/beam ! Clean residual mean=-0.000021 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.15079 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 73 components and 0.15079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109209Jy sigma=0.000660 ! Fit after self-cal, rms=0.109229Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.81144e-05 Jy ! Component: 100 - total flux cleaned = -2.72573e-05 Jy ! Component: 150 - total flux cleaned = -2.6659e-05 Jy ! Component: 200 - total flux cleaned = -2.64901e-05 Jy ! Total flux subtracted in 200 components = -2.64901e-05 Jy ! Clean residual min=-0.003350 max=0.003378 Jy/beam ! Clean residual mean=-0.000021 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.150763 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 76 components and 0.150763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109226Jy sigma=0.000660 ! Fit after self-cal, rms=0.109226Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109226Jy sigma=0.000660 ! Fit after self-cal, rms=0.109271Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.742 mas, bmaj=20.4 mas, bpa=-4.273 degrees ! Estimated noise=1781.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478982 Jy ! Component: 100 - total flux cleaned = 0.000476466 Jy ! Component: 150 - total flux cleaned = 0.000476415 Jy ! Component: 200 - total flux cleaned = 0.000488508 Jy ! Total flux subtracted in 200 components = 0.000488508 Jy ! Clean residual min=-0.003972 max=0.004088 Jy/beam ! Clean residual mean=-0.000044 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.151252 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 82 components and 0.151252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109272Jy sigma=0.000660 ! Fit after self-cal, rms=0.109270Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.4157e-05 Jy ! Component: 100 - total flux cleaned = 3.61275e-05 Jy ! Component: 150 - total flux cleaned = 4.8458e-05 Jy ! Component: 200 - total flux cleaned = 5.92481e-05 Jy ! Total flux subtracted in 200 components = 5.92481e-05 Jy ! Clean residual min=-0.003962 max=0.004087 Jy/beam ! Clean residual mean=-0.000044 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.151311 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 82 components and 0.151311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109270Jy sigma=0.000660 ! Fit after self-cal, rms=0.109267Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=7.851 mas, bpa=-6.945 degrees ! Estimated noise=1391.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.936 x 7.851 at -6.945 degrees (North through East) ! Clean map min=-0.0032319 max=0.12344 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.34 mas, bmaj=6.789 mas, bpa=-6.816 degrees ! Estimated noise=1846.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.096814 Jy ! Component: 100 - total flux cleaned = 0.119555 Jy ! Component: 150 - total flux cleaned = 0.130101 Jy ! Component: 200 - total flux cleaned = 0.136557 Jy ! Total flux subtracted in 200 components = 0.136557 Jy ! Clean residual min=-0.005164 max=0.004401 Jy/beam ! Clean residual mean=-0.000007 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.136557 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.136557 Jy ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=7.851 mas, bpa=-6.945 degrees ! Estimated noise=1391.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666637 Jy ! Component: 100 - total flux cleaned = 0.0103311 Jy ! Component: 150 - total flux cleaned = 0.012547 Jy ! Component: 200 - total flux cleaned = 0.0139373 Jy ! Total flux subtracted in 200 components = 0.0139373 Jy ! Clean residual min=-0.003375 max=0.003314 Jy/beam ! Clean residual mean=-0.000020 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.150494 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 66 components and 0.150494 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.742 mas, bmaj=20.4 mas, bpa=-4.273 degrees ! Estimated noise=1781.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136997 Jy ! Component: 100 - total flux cleaned = 0.00171326 Jy ! Component: 150 - total flux cleaned = 0.00174405 Jy ! Component: 200 - total flux cleaned = 0.00173055 Jy ! Total flux subtracted in 200 components = 0.00173055 Jy ! Clean residual min=-0.003745 max=0.003975 Jy/beam ! Clean residual mean=-0.000042 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.152224 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.47006e-07 Jy ! Component: 100 - total flux cleaned = -5.12577e-07 Jy ! Component: 150 - total flux cleaned = -2.15724e-06 Jy ! Component: 200 - total flux cleaned = -2.64177e-06 Jy ! Total flux subtracted in 200 components = -2.64177e-06 Jy ! Clean residual min=-0.003732 max=0.003967 Jy/beam ! Clean residual mean=-0.000042 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.152222 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.152222 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=7.851 mas, bpa=-6.945 degrees ! Estimated noise=1391.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163874 Jy ! Component: 100 - total flux cleaned = -8.94635e-05 Jy ! Component: 150 - total flux cleaned = -2.87822e-05 Jy ! Component: 200 - total flux cleaned = -2.93666e-05 Jy ! Total flux subtracted in 200 components = -2.93666e-05 Jy ! Clean residual min=-0.003267 max=0.003331 Jy/beam ! Clean residual mean=-0.000019 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.152192 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 86 components and 0.152192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109221Jy sigma=0.000660 ! Fit after self-cal, rms=0.109192Jy sigma=0.000659 wmodel J1019-2708_S_2017_08_05_pus_map.mod ! Writing 86 model components to file: J1019-2708_S_2017_08_05_pus_map.mod wobs J1019-2708_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1019-2708_S_2017_08_05_pus_uvs.fits wwins J1019-2708_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1019-2708_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295112 Jy ! Component: 100 - total flux cleaned = -0.000623299 Jy ! Component: 150 - total flux cleaned = -0.00102825 Jy ! Component: 200 - total flux cleaned = -0.00151027 Jy ! Component: 250 - total flux cleaned = -0.00188038 Jy ! Component: 300 - total flux cleaned = -0.00228023 Jy ! Component: 350 - total flux cleaned = -0.00245352 Jy ! Component: 400 - total flux cleaned = -0.00278772 Jy ! Component: 450 - total flux cleaned = -0.00290987 Jy ! Component: 500 - total flux cleaned = -0.00314595 Jy ! Component: 550 - total flux cleaned = -0.00329938 Jy ! Component: 600 - total flux cleaned = -0.00344837 Jy ! Component: 650 - total flux cleaned = -0.00362949 Jy ! Component: 700 - total flux cleaned = -0.00373571 Jy ! Component: 750 - total flux cleaned = -0.00390863 Jy ! Component: 800 - total flux cleaned = -0.00407821 Jy ! Component: 850 - total flux cleaned = -0.00427823 Jy ! Component: 900 - total flux cleaned = -0.00460472 Jy ! Component: 950 - total flux cleaned = -0.00479683 Jy ! Component: 1000 - total flux cleaned = -0.00498663 Jy ! Component: 1050 - total flux cleaned = -0.00529564 Jy ! Component: 1100 - total flux cleaned = -0.0054169 Jy ! Component: 1150 - total flux cleaned = -0.00550699 Jy ! Component: 1200 - total flux cleaned = -0.00565482 Jy ! Component: 1250 - total flux cleaned = -0.00571338 Jy ! Component: 1300 - total flux cleaned = -0.00585696 Jy ! Component: 1350 - total flux cleaned = -0.00596967 Jy ! Component: 1400 - total flux cleaned = -0.00605276 Jy ! Component: 1450 - total flux cleaned = -0.00605254 Jy ! Component: 1500 - total flux cleaned = -0.00613404 Jy ! Component: 1550 - total flux cleaned = -0.00618757 Jy ! Component: 1600 - total flux cleaned = -0.00610786 Jy ! Component: 1650 - total flux cleaned = -0.00613367 Jy ! Component: 1700 - total flux cleaned = -0.00610789 Jy ! Component: 1750 - total flux cleaned = -0.00603165 Jy ! Component: 1800 - total flux cleaned = -0.00598124 Jy ! Component: 1850 - total flux cleaned = -0.00595609 Jy ! Component: 1900 - total flux cleaned = -0.00583255 Jy ! Component: 1950 - total flux cleaned = -0.00575902 Jy ! Component: 2000 - total flux cleaned = -0.00563822 Jy ! Component: 2050 - total flux cleaned = -0.00551901 Jy ! Component: 2100 - total flux cleaned = -0.00544854 Jy ! Component: 2150 - total flux cleaned = -0.00542512 Jy ! Component: 2200 - total flux cleaned = -0.00535571 Jy ! Component: 2250 - total flux cleaned = -0.00530994 Jy ! Component: 2300 - total flux cleaned = -0.00524148 Jy ! Component: 2350 - total flux cleaned = -0.00517362 Jy ! Component: 2400 - total flux cleaned = -0.00510656 Jy ! Component: 2450 - total flux cleaned = -0.00497409 Jy ! Component: 2500 - total flux cleaned = -0.00501802 Jy ! Component: 2550 - total flux cleaned = -0.00490946 Jy ! Component: 2600 - total flux cleaned = -0.00486648 Jy ! Component: 2650 - total flux cleaned = -0.00490912 Jy ! Component: 2700 - total flux cleaned = -0.004824 Jy ! Component: 2750 - total flux cleaned = -0.00482381 Jy ! Component: 2800 - total flux cleaned = -0.00474017 Jy ! Component: 2850 - total flux cleaned = -0.00463677 Jy ! Component: 2900 - total flux cleaned = -0.00461643 Jy ! Component: 2950 - total flux cleaned = -0.00457571 Jy ! Component: 3000 - total flux cleaned = -0.00449458 Jy ! Component: 3050 - total flux cleaned = -0.00447435 Jy ! Component: 3100 - total flux cleaned = -0.00439456 Jy ! Component: 3150 - total flux cleaned = -0.00431535 Jy ! Component: 3200 - total flux cleaned = -0.00427599 Jy ! Component: 3250 - total flux cleaned = -0.00421738 Jy ! Component: 3300 - total flux cleaned = -0.00417868 Jy ! Component: 3350 - total flux cleaned = -0.00414003 Jy ! Component: 3400 - total flux cleaned = -0.00402477 Jy ! Component: 3450 - total flux cleaned = -0.00391024 Jy ! Component: 3500 - total flux cleaned = -0.00391027 Jy ! Component: 3550 - total flux cleaned = -0.00385355 Jy ! Component: 3600 - total flux cleaned = -0.00377831 Jy ! Component: 3650 - total flux cleaned = -0.00370368 Jy ! Component: 3700 - total flux cleaned = -0.00357351 Jy ! Component: 3750 - total flux cleaned = -0.00353655 Jy ! Component: 3800 - total flux cleaned = -0.00338936 Jy ! Component: 3850 - total flux cleaned = -0.00329795 Jy ! Component: 3900 - total flux cleaned = -0.00322503 Jy ! Component: 3950 - total flux cleaned = -0.00315256 Jy ! Component: 4000 - total flux cleaned = -0.0030625 Jy ! Component: 4050 - total flux cleaned = -0.00300862 Jy ! Total flux subtracted in 4096 components = -0.00291934 Jy ! Clean residual min=-0.001145 max=0.001135 Jy/beam ! Clean residual mean=0.000002 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.149273 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 352 components and 0.149273 Jy ![Exited script file: muppet] wmap "J1019-2708_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.936 x 7.851 at -6.945 degrees (North through East) ! Clean map min=-0.0023417 max=0.12527 Jy/beam ! Writing clean map to FITS file: J1019-2708_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.125272 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000308582 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.738989 0.738989 1.47798 2.95596 5.91191 11.8238 23.6477 47.2953 94.5906 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.125 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.936 x 7.851 at -6.945 degrees (North through East) ! Clean map min=-0.0023417 max=0.12527 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1019-2708_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:26:58 2019