! Started logfile: J1018-3144_S_2017_07_16_pus_uvs.log on Thu May 9 11:06:51 2019 obs J1018-3144_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1018-3144_S_2017_07_16_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.657078 visibilities/baseline/integration-bin. ! Found source: J1018-3144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 17268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1018-3144_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 442 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 457 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 281 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1148 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911824Jy sigma=0.005851 ! Fit after self-cal, rms=0.851916Jy sigma=0.005458 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=6.431 mas, bpa=-6.183 degrees ! Estimated noise=1612.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101386 Jy ! Component: 100 - total flux cleaned = 0.161562 Jy ! Total flux subtracted in 100 components = 0.161562 Jy ! Clean residual min=-0.020812 max=0.043655 Jy/beam ! Clean residual mean=-0.000861 rms=0.009203 Jy/beam ! Combined flux in latest and established models = 0.161562 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 52 components and 0.161562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229204Jy sigma=0.001538 ! Fit after self-cal, rms=0.228370Jy sigma=0.001535 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=8.481 mas, bpa=-5.635 degrees ! Estimated noise=1067.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0991303 Jy ! Component: 100 - total flux cleaned = 0.151892 Jy ! Component: 150 - total flux cleaned = 0.18008 Jy ! Component: 200 - total flux cleaned = 0.195139 Jy ! Total flux subtracted in 200 components = 0.195139 Jy ! Clean residual min=-0.036993 max=0.062701 Jy/beam ! Clean residual mean=-0.001258 rms=0.015714 Jy/beam ! Combined flux in latest and established models = 0.3567 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.3567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188644Jy sigma=0.001251 ! Fit after self-cal, rms=0.186776Jy sigma=0.001246 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.29 FD 1.00* HN 2.18 KP 0.72 ! LA 0.81 MK 1.37 NL 1.56 OV 1.12 ! PT 0.78 SC 1.49 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.30 FD 1.00* HN 2.42 KP 0.68 ! LA 0.80 MK 1.54 NL 1.79 OV 1.25 ! PT 0.76 SC 0.78 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 3.04 FD 1.00* HN 2.17 KP 0.67 ! LA 0.80 MK 1.71 NL 1.86 OV 1.11 ! PT 0.76 SC 1.63 ! ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.39 KP 1.00* ! LA 0.82 MK 0.97 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.186776Jy sigma=0.001246 ! Fit after self-cal, rms=0.349558Jy sigma=0.000903 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=9.521 mas, bpa=-4.137 degrees ! Estimated noise=1312.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472209 Jy ! Component: 100 - total flux cleaned = 0.00496101 Jy ! Component: 150 - total flux cleaned = 0.0051718 Jy ! Component: 200 - total flux cleaned = 0.00535912 Jy ! Total flux subtracted in 200 components = 0.00535912 Jy ! Clean residual min=-0.026945 max=0.037551 Jy/beam ! Clean residual mean=-0.000589 rms=0.010147 Jy/beam ! Combined flux in latest and established models = 0.36206 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.36206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349122Jy sigma=0.000903 ! Fit after self-cal, rms=0.355712Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355712Jy sigma=0.000894 ! Fit after self-cal, rms=0.391794Jy sigma=0.000850 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=9.438 mas, bpa=-4.786 degrees ! Estimated noise=1345.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102644 Jy ! Component: 100 - total flux cleaned = 0.013542 Jy ! Component: 150 - total flux cleaned = 0.013791 Jy ! Component: 200 - total flux cleaned = 0.0140728 Jy ! Total flux subtracted in 200 components = 0.0140728 Jy ! Clean residual min=-0.026649 max=0.033440 Jy/beam ! Clean residual mean=-0.000254 rms=0.009216 Jy/beam ! Combined flux in latest and established models = 0.376132 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 82 components and 0.376132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391103Jy sigma=0.000849 ! Fit after self-cal, rms=0.391385Jy sigma=0.000848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823866 Jy ! Component: 100 - total flux cleaned = 0.000700526 Jy ! Component: 150 - total flux cleaned = 0.000709671 Jy ! Component: 200 - total flux cleaned = 0.000709716 Jy ! Total flux subtracted in 200 components = 0.000709716 Jy ! Clean residual min=-0.026928 max=0.033326 Jy/beam ! Clean residual mean=-0.000248 rms=0.009191 Jy/beam ! Combined flux in latest and established models = 0.376842 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 0.376842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391196Jy sigma=0.000848 ! Fit after self-cal, rms=0.391288Jy sigma=0.000848 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391288Jy sigma=0.000848 ! Fit after self-cal, rms=0.420317Jy sigma=0.000835 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=9.257 mas, bpa=-3.223 degrees ! Estimated noise=1294.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514354 Jy ! Component: 100 - total flux cleaned = 0.0055655 Jy ! Component: 150 - total flux cleaned = 0.00572674 Jy ! Component: 200 - total flux cleaned = 0.0059329 Jy ! Total flux subtracted in 200 components = 0.0059329 Jy ! Clean residual min=-0.026808 max=0.030467 Jy/beam ! Clean residual mean=-0.000014 rms=0.008701 Jy/beam ! Combined flux in latest and established models = 0.382775 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 0.382775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420028Jy sigma=0.000836 ! Fit after self-cal, rms=0.420203Jy sigma=0.000835 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196636 Jy ! Component: 100 - total flux cleaned = 0.000194771 Jy ! Component: 150 - total flux cleaned = 0.00019686 Jy ! Component: 200 - total flux cleaned = 0.000199374 Jy ! Total flux subtracted in 200 components = 0.000199374 Jy ! Clean residual min=-0.026700 max=0.030400 Jy/beam ! Clean residual mean=-0.000013 rms=0.008699 Jy/beam ! Combined flux in latest and established models = 0.382974 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.382974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420091Jy sigma=0.000835 ! Fit after self-cal, rms=0.420149Jy sigma=0.000835 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420149Jy sigma=0.000835 ! Fit after self-cal, rms=0.424287Jy sigma=0.000834 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.494 mas, bmaj=26.93 mas, bpa=-2.095 degrees ! Estimated noise=1435.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638242 Jy ! Component: 100 - total flux cleaned = 0.00636394 Jy ! Component: 150 - total flux cleaned = 0.00637181 Jy ! Component: 200 - total flux cleaned = 0.00646217 Jy ! Total flux subtracted in 200 components = 0.00646217 Jy ! Clean residual min=-0.043962 max=0.050879 Jy/beam ! Clean residual mean=-0.000027 rms=0.014955 Jy/beam ! Combined flux in latest and established models = 0.389437 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 89 components and 0.389437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424003Jy sigma=0.000836 ! Fit after self-cal, rms=0.424094Jy sigma=0.000836 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000363086 Jy ! Component: 100 - total flux cleaned = -0.000357646 Jy ! Component: 150 - total flux cleaned = -0.000352776 Jy ! Component: 200 - total flux cleaned = -0.000267528 Jy ! Total flux subtracted in 200 components = -0.000267528 Jy ! Clean residual min=-0.043942 max=0.050889 Jy/beam ! Clean residual mean=-0.000029 rms=0.014946 Jy/beam ! Combined flux in latest and established models = 0.389169 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 90 components and 0.389169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.423988Jy sigma=0.000837 ! Fit after self-cal, rms=0.424174Jy sigma=0.000836 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.309 mas, bpa=-3.393 degrees ! Estimated noise=1315.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 9.309 at -3.393 degrees (North through East) ! Clean map min=-0.026735 max=0.15866 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.472 mas, bmaj=6.938 mas, bpa=-5.833 degrees ! Estimated noise=2331.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144989 Jy ! Component: 100 - total flux cleaned = 0.230626 Jy ! Component: 150 - total flux cleaned = 0.284436 Jy ! Component: 200 - total flux cleaned = 0.318492 Jy ! Total flux subtracted in 200 components = 0.318492 Jy ! Clean residual min=-0.016990 max=0.021631 Jy/beam ! Clean residual mean=-0.000305 rms=0.005695 Jy/beam ! Combined flux in latest and established models = 0.318492 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.318492 Jy ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.309 mas, bpa=-3.393 degrees ! Estimated noise=1315.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361531 Jy ! Component: 100 - total flux cleaned = 0.0527152 Jy ! Component: 150 - total flux cleaned = 0.0605174 Jy ! Component: 200 - total flux cleaned = 0.0639958 Jy ! Total flux subtracted in 200 components = 0.0639958 Jy ! Clean residual min=-0.027168 max=0.031335 Jy/beam ! Clean residual mean=-0.000068 rms=0.008882 Jy/beam ! Combined flux in latest and established models = 0.382488 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 62 components and 0.382488 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.494 mas, bmaj=26.93 mas, bpa=-2.095 degrees ! Estimated noise=1435.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459599 Jy ! Component: 100 - total flux cleaned = 0.00470297 Jy ! Component: 150 - total flux cleaned = 0.00471001 Jy ! Component: 200 - total flux cleaned = 0.00480028 Jy ! Total flux subtracted in 200 components = 0.00480028 Jy ! Clean residual min=-0.044307 max=0.050998 Jy/beam ! Clean residual mean=-0.000055 rms=0.014954 Jy/beam ! Combined flux in latest and established models = 0.387288 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.61947e-05 Jy ! Component: 100 - total flux cleaned = 0.000164978 Jy ! Component: 150 - total flux cleaned = 0.00023375 Jy ! Component: 200 - total flux cleaned = 0.000298304 Jy ! Total flux subtracted in 200 components = 0.000298304 Jy ! Clean residual min=-0.044194 max=0.050788 Jy/beam ! Clean residual mean=-0.000050 rms=0.014976 Jy/beam ! Combined flux in latest and established models = 0.387587 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.387587 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.309 mas, bpa=-3.393 degrees ! Estimated noise=1315.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226055 Jy ! Component: 100 - total flux cleaned = -0.00224853 Jy ! Component: 150 - total flux cleaned = -0.00240045 Jy ! Component: 200 - total flux cleaned = -0.00245848 Jy ! Total flux subtracted in 200 components = -0.00245848 Jy ! Clean residual min=-0.026979 max=0.031281 Jy/beam ! Clean residual mean=-0.000044 rms=0.008879 Jy/beam ! Combined flux in latest and established models = 0.385128 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.385128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424057Jy sigma=0.000837 ! Fit after self-cal, rms=0.423858Jy sigma=0.000836 wmodel J1018-3144_S_2017_07_16_pus_map.mod ! Writing 74 model components to file: J1018-3144_S_2017_07_16_pus_map.mod wobs J1018-3144_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1018-3144_S_2017_07_16_pus_uvs.fits wwins J1018-3144_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1018-3144_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133008 Jy ! Component: 100 - total flux cleaned = 0.0194731 Jy ! Component: 150 - total flux cleaned = 0.0259272 Jy ! Component: 200 - total flux cleaned = 0.0306988 Jy ! Component: 250 - total flux cleaned = 0.0347577 Jy ! Component: 300 - total flux cleaned = 0.0388697 Jy ! Component: 350 - total flux cleaned = 0.0424039 Jy ! Component: 400 - total flux cleaned = 0.0469334 Jy ! Component: 450 - total flux cleaned = 0.0512325 Jy ! Component: 500 - total flux cleaned = 0.0547972 Jy ! Component: 550 - total flux cleaned = 0.0576898 Jy ! Component: 600 - total flux cleaned = 0.0612401 Jy ! Component: 650 - total flux cleaned = 0.0639332 Jy ! Component: 700 - total flux cleaned = 0.0663077 Jy ! Component: 750 - total flux cleaned = 0.0688427 Jy ! Component: 800 - total flux cleaned = 0.0699627 Jy ! Component: 850 - total flux cleaned = 0.0721435 Jy ! Component: 900 - total flux cleaned = 0.0729922 Jy ! Component: 950 - total flux cleaned = 0.0744419 Jy ! Component: 1000 - total flux cleaned = 0.0758503 Jy ! Component: 1050 - total flux cleaned = 0.0766339 Jy ! Component: 1100 - total flux cleaned = 0.0781706 Jy ! Component: 1150 - total flux cleaned = 0.0789163 Jy ! Component: 1200 - total flux cleaned = 0.0796493 Jy ! Component: 1250 - total flux cleaned = 0.080189 Jy ! Component: 1300 - total flux cleaned = 0.081073 Jy ! Component: 1350 - total flux cleaned = 0.0817657 Jy ! Component: 1400 - total flux cleaned = 0.0824427 Jy ! Component: 1450 - total flux cleaned = 0.0831064 Jy ! Component: 1500 - total flux cleaned = 0.0832691 Jy ! Component: 1550 - total flux cleaned = 0.0835883 Jy ! Component: 1600 - total flux cleaned = 0.0837478 Jy ! Component: 1650 - total flux cleaned = 0.084369 Jy ! Component: 1700 - total flux cleaned = 0.0846744 Jy ! Component: 1750 - total flux cleaned = 0.0851232 Jy ! Component: 1800 - total flux cleaned = 0.0854165 Jy ! Component: 1850 - total flux cleaned = 0.0855602 Jy ! Component: 1900 - total flux cleaned = 0.0858455 Jy ! Component: 1950 - total flux cleaned = 0.0861281 Jy ! Component: 2000 - total flux cleaned = 0.0862678 Jy ! Component: 2050 - total flux cleaned = 0.0864036 Jy ! Component: 2100 - total flux cleaned = 0.086269 Jy ! Component: 2150 - total flux cleaned = 0.0861364 Jy ! Component: 2200 - total flux cleaned = 0.0860065 Jy ! Component: 2250 - total flux cleaned = 0.0863947 Jy ! Component: 2300 - total flux cleaned = 0.0862648 Jy ! Component: 2350 - total flux cleaned = 0.0860124 Jy ! Component: 2400 - total flux cleaned = 0.0858859 Jy ! Component: 2450 - total flux cleaned = 0.085762 Jy ! Component: 2500 - total flux cleaned = 0.0853976 Jy ! Component: 2550 - total flux cleaned = 0.0849175 Jy ! Component: 2600 - total flux cleaned = 0.0839639 Jy ! Component: 2650 - total flux cleaned = 0.083138 Jy ! Component: 2700 - total flux cleaned = 0.0823204 Jy ! Component: 2750 - total flux cleaned = 0.081162 Jy ! Component: 2800 - total flux cleaned = 0.0798985 Jy ! Component: 2850 - total flux cleaned = 0.0787584 Jy ! Component: 2900 - total flux cleaned = 0.0774041 Jy ! Component: 2950 - total flux cleaned = 0.0762835 Jy ! Component: 3000 - total flux cleaned = 0.0751718 Jy ! Component: 3050 - total flux cleaned = 0.0739579 Jy ! Component: 3100 - total flux cleaned = 0.0729722 Jy ! Component: 3150 - total flux cleaned = 0.0719921 Jy ! Component: 3200 - total flux cleaned = 0.0708018 Jy ! Component: 3250 - total flux cleaned = 0.069942 Jy ! Component: 3300 - total flux cleaned = 0.0688732 Jy ! Component: 3350 - total flux cleaned = 0.0675969 Jy ! Component: 3400 - total flux cleaned = 0.0665394 Jy ! Component: 3450 - total flux cleaned = 0.0653825 Jy ! Component: 3500 - total flux cleaned = 0.0642306 Jy ! Component: 3550 - total flux cleaned = 0.0629807 Jy ! Component: 3600 - total flux cleaned = 0.0622548 Jy ! Component: 3650 - total flux cleaned = 0.0610139 Jy ! Component: 3700 - total flux cleaned = 0.059777 Jy ! Component: 3750 - total flux cleaned = 0.0585434 Jy ! Component: 3800 - total flux cleaned = 0.0573136 Jy ! Component: 3850 - total flux cleaned = 0.0560859 Jy ! Component: 3900 - total flux cleaned = 0.0548604 Jy ! Component: 3950 - total flux cleaned = 0.0533314 Jy ! Component: 4000 - total flux cleaned = 0.0525173 Jy ! Component: 4050 - total flux cleaned = 0.0511954 Jy ! Total flux subtracted in 4096 components = 0.0499766 Jy ! Clean residual min=-0.005499 max=0.005973 Jy/beam ! Clean residual mean=-0.000032 rms=0.002143 Jy/beam ! Combined flux in latest and established models = 0.435105 Jy keep ! Adding 599 model components to the UV plane model. ! The established model now contains 673 components and 0.435104 Jy ![Exited script file: muppet] wmap "J1018-3144_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 9.309 at -3.393 degrees (North through East) ! Clean map min=-0.014411 max=0.16537 Jy/beam ! Writing clean map to FITS file: J1018-3144_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.165373 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00193705 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.51398 3.51398 7.02795 14.0559 28.1118 56.2236 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0058 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.165 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 9.309 at -3.393 degrees (North through East) ! Clean map min=-0.014411 max=0.16537 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1018-3144_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:06:57 2019