! Started logfile: J1018+3542_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:11:04 2019 obs J1018+3542_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1018+3542_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.494444 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1018+3542 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1018+3542_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.534029Jy sigma=0.005066 ! Fit after self-cal, rms=0.530789Jy sigma=0.005042 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=7.213 mas, bpa=1.883 degrees ! Estimated noise=3387.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.379701 Jy ! Component: 100 - total flux cleaned = 0.465967 Jy ! Total flux subtracted in 100 components = 0.465967 Jy ! Clean residual min=-0.020118 max=0.037136 Jy/beam ! Clean residual mean=-0.000005 rms=0.006971 Jy/beam ! Combined flux in latest and established models = 0.465967 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.465967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109577Jy sigma=0.000919 ! Fit after self-cal, rms=0.109582Jy sigma=0.000919 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=7.914 mas, bpa=6.426 degrees ! Estimated noise=2936.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0389357 Jy ! Component: 100 - total flux cleaned = 0.0596363 Jy ! Component: 150 - total flux cleaned = 0.0723558 Jy ! Component: 200 - total flux cleaned = 0.080681 Jy ! Total flux subtracted in 200 components = 0.080681 Jy ! Clean residual min=-0.013204 max=0.017545 Jy/beam ! Clean residual mean=0.000036 rms=0.003740 Jy/beam ! Combined flux in latest and established models = 0.546648 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.546648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095822Jy sigma=0.000742 ! Fit after self-cal, rms=0.095822Jy sigma=0.000741 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.93 HN 0.95 KP 1.00 ! LA 1.00* MK 1.00* NL 0.90 OV 1.00 ! PT 0.98 SC 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.01 KP 0.97 ! LA 1.00* MK 1.00* NL 1.02 OV 1.01 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.03 HN 0.99 KP 1.02 ! LA 1.00* MK 1.00* NL 1.05 OV 0.95 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.00 KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 0.96 ! PT 1.02 SC 1.59 ! ! ! Fit before self-cal, rms=0.095822Jy sigma=0.000741 ! Fit after self-cal, rms=0.094113Jy sigma=0.000637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=7.949 mas, bpa=5.822 degrees ! Estimated noise=2944.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785617 Jy ! Component: 100 - total flux cleaned = 0.000478491 Jy ! Component: 150 - total flux cleaned = -4.28028e-05 Jy ! Component: 200 - total flux cleaned = -0.000464068 Jy ! Total flux subtracted in 200 components = -0.000464068 Jy ! Clean residual min=-0.007394 max=0.009317 Jy/beam ! Clean residual mean=0.000014 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.546184 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.546184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093890Jy sigma=0.000634 ! Fit after self-cal, rms=0.093998Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093998Jy sigma=0.000634 ! Fit after self-cal, rms=0.093854Jy sigma=0.000633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=7.948 mas, bpa=5.754 degrees ! Estimated noise=2942.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120193 Jy ! Component: 100 - total flux cleaned = -0.000281894 Jy ! Component: 150 - total flux cleaned = -0.000373422 Jy ! Component: 200 - total flux cleaned = -0.000412151 Jy ! Total flux subtracted in 200 components = -0.000412151 Jy ! Clean residual min=-0.006769 max=0.008984 Jy/beam ! Clean residual mean=0.000012 rms=0.001829 Jy/beam ! Combined flux in latest and established models = 0.545772 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.545772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093769Jy sigma=0.000632 ! Fit after self-cal, rms=0.093783Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 103.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00671334 Jy ! Component: 100 - total flux cleaned = 0.00729259 Jy ! Component: 150 - total flux cleaned = 0.00773824 Jy ! Component: 200 - total flux cleaned = 0.00801027 Jy ! Total flux subtracted in 200 components = 0.00801027 Jy ! Clean residual min=-0.005419 max=0.006990 Jy/beam ! Clean residual mean=0.000007 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.553782 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.553782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092883Jy sigma=0.000624 ! Fit after self-cal, rms=0.092925Jy sigma=0.000624 ! Inverting map ! Added new window around map position (-89, 109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577318 Jy ! Component: 100 - total flux cleaned = 0.00656178 Jy ! Component: 150 - total flux cleaned = 0.00709106 Jy ! Component: 200 - total flux cleaned = 0.00727771 Jy ! Total flux subtracted in 200 components = 0.00727771 Jy ! Clean residual min=-0.005033 max=0.005435 Jy/beam ! Clean residual mean=0.000007 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.56106 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.56106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092147Jy sigma=0.000619 ! Fit after self-cal, rms=0.092115Jy sigma=0.000619 ! Inverting map ! Added new window around map position (108, -122.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148641 Jy ! Component: 100 - total flux cleaned = 0.00192214 Jy ! Component: 150 - total flux cleaned = 0.00162947 Jy ! Component: 200 - total flux cleaned = 0.00127265 Jy ! Total flux subtracted in 200 components = 0.00127265 Jy ! Clean residual min=-0.004548 max=0.004223 Jy/beam ! Clean residual mean=0.000003 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.562332 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.562332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091475Jy sigma=0.000614 ! Fit after self-cal, rms=0.091452Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091452Jy sigma=0.000614 ! Fit after self-cal, rms=0.091352Jy sigma=0.000613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=7.946 mas, bpa=5.763 degrees ! Estimated noise=2939.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000685713 Jy ! Component: 100 - total flux cleaned = 0.000682466 Jy ! Component: 150 - total flux cleaned = 0.000608496 Jy ! Component: 200 - total flux cleaned = 0.000537776 Jy ! Total flux subtracted in 200 components = 0.000537776 Jy ! Clean residual min=-0.004315 max=0.003838 Jy/beam ! Clean residual mean=0.000003 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.56287 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 123 components and 0.56287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091067Jy sigma=0.000612 ! Fit after self-cal, rms=0.091064Jy sigma=0.000612 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.6902e-05 Jy ! Component: 100 - total flux cleaned = 3.33525e-05 Jy ! Component: 150 - total flux cleaned = -0.000208556 Jy ! Component: 200 - total flux cleaned = -0.000378888 Jy ! Total flux subtracted in 200 components = -0.000378888 Jy ! Clean residual min=-0.004343 max=0.003770 Jy/beam ! Clean residual mean=0.000002 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.562491 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 134 components and 0.562491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090888Jy sigma=0.000611 ! Fit after self-cal, rms=0.090883Jy sigma=0.000611 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090883Jy sigma=0.000611 ! Fit after self-cal, rms=0.091017Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.17 mas, bmaj=9.321 mas, bpa=3.246 degrees ! Estimated noise=3481.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176711 Jy ! Component: 100 - total flux cleaned = 7.92186e-05 Jy ! Component: 150 - total flux cleaned = 7.89868e-05 Jy ! Component: 200 - total flux cleaned = 3.58848e-05 Jy ! Total flux subtracted in 200 components = 3.58848e-05 Jy ! Clean residual min=-0.003592 max=0.003531 Jy/beam ! Clean residual mean=0.000004 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.562527 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 160 components and 0.562527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091008Jy sigma=0.000611 ! Fit after self-cal, rms=0.091011Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.56431e-05 Jy ! Component: 100 - total flux cleaned = -6.40622e-05 Jy ! Component: 150 - total flux cleaned = -9.92653e-05 Jy ! Component: 200 - total flux cleaned = -6.46651e-05 Jy ! Total flux subtracted in 200 components = -6.46651e-05 Jy ! Clean residual min=-0.003600 max=0.003434 Jy/beam ! Clean residual mean=0.000005 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.562462 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 177 components and 0.562462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091013Jy sigma=0.000610 ! Fit after self-cal, rms=0.091017Jy sigma=0.000610 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=7.946 mas, bpa=5.782 degrees ! Estimated noise=2939.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.797 x 7.946 at 5.782 degrees (North through East) ! Clean map min=-0.0046898 max=0.48706 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=7.254 mas, bpa=1.322 degrees ! Estimated noise=3379.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.376998 Jy ! Component: 100 - total flux cleaned = 0.461442 Jy ! Component: 150 - total flux cleaned = 0.493631 Jy ! Component: 200 - total flux cleaned = 0.511367 Jy ! Total flux subtracted in 200 components = 0.511367 Jy ! Clean residual min=-0.010470 max=0.009390 Jy/beam ! Clean residual mean=-0.000003 rms=0.002741 Jy/beam ! Combined flux in latest and established models = 0.511367 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.511367 Jy ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=7.946 mas, bpa=5.782 degrees ! Estimated noise=2939.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139159 Jy ! Component: 100 - total flux cleaned = 0.0219973 Jy ! Component: 150 - total flux cleaned = 0.0277006 Jy ! Component: 200 - total flux cleaned = 0.0316594 Jy ! Total flux subtracted in 200 components = 0.0316594 Jy ! Clean residual min=-0.006207 max=0.005674 Jy/beam ! Clean residual mean=0.000006 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.543026 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.543026 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.17 mas, bmaj=9.321 mas, bpa=3.246 degrees ! Estimated noise=3481.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603835 Jy ! Component: 100 - total flux cleaned = 0.00835072 Jy ! Component: 150 - total flux cleaned = 0.00998324 Jy ! Component: 200 - total flux cleaned = 0.0108885 Jy ! Total flux subtracted in 200 components = 0.0108885 Jy ! Clean residual min=-0.004763 max=0.003922 Jy/beam ! Clean residual mean=0.000007 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.553915 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000788586 Jy ! Component: 100 - total flux cleaned = 0.00148717 Jy ! Component: 150 - total flux cleaned = 0.00193761 Jy ! Component: 200 - total flux cleaned = 0.00243007 Jy ! Total flux subtracted in 200 components = 0.00243007 Jy ! Clean residual min=-0.003775 max=0.003643 Jy/beam ! Clean residual mean=0.000005 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.556345 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 97 components and 0.556345 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=7.946 mas, bpa=5.782 degrees ! Estimated noise=2939.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221032 Jy ! Component: 100 - total flux cleaned = 0.00210836 Jy ! Component: 150 - total flux cleaned = 0.00191157 Jy ! Component: 200 - total flux cleaned = 0.00209218 Jy ! Total flux subtracted in 200 components = 0.00209218 Jy ! Clean residual min=-0.004394 max=0.003872 Jy/beam ! Clean residual mean=0.000003 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.558437 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.558437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092110Jy sigma=0.000613 ! Fit after self-cal, rms=0.092073Jy sigma=0.000613 wmodel J1018+3542_S_2017_01_16_pus_map.mod ! Writing 120 model components to file: J1018+3542_S_2017_01_16_pus_map.mod wobs J1018+3542_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1018+3542_S_2017_01_16_pus_uvs.fits wwins J1018+3542_S_2017_01_16_pus_map.win ! wwins: Wrote 4 windows to J1018+3542_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103722 Jy ! Component: 100 - total flux cleaned = -0.0016631 Jy ! Component: 150 - total flux cleaned = -0.00217886 Jy ! Component: 200 - total flux cleaned = -0.00266268 Jy ! Component: 250 - total flux cleaned = -0.00300625 Jy ! Component: 300 - total flux cleaned = -0.0032265 Jy ! Component: 350 - total flux cleaned = -0.00343775 Jy ! Component: 400 - total flux cleaned = -0.00359037 Jy ! Component: 450 - total flux cleaned = -0.00378826 Jy ! Component: 500 - total flux cleaned = -0.00393295 Jy ! Component: 550 - total flux cleaned = -0.00393383 Jy ! Component: 600 - total flux cleaned = -0.00384218 Jy ! Component: 650 - total flux cleaned = -0.00384211 Jy ! Component: 700 - total flux cleaned = -0.00370953 Jy ! Component: 750 - total flux cleaned = -0.00358006 Jy ! Component: 800 - total flux cleaned = -0.00341101 Jy ! Component: 850 - total flux cleaned = -0.00328663 Jy ! Component: 900 - total flux cleaned = -0.00312332 Jy ! Component: 950 - total flux cleaned = -0.00296305 Jy ! Component: 1000 - total flux cleaned = -0.00292345 Jy ! Component: 1050 - total flux cleaned = -0.00272987 Jy ! Component: 1100 - total flux cleaned = -0.00265367 Jy ! Component: 1150 - total flux cleaned = -0.00269057 Jy ! Component: 1200 - total flux cleaned = -0.00257871 Jy ! Component: 1250 - total flux cleaned = -0.00246946 Jy ! Component: 1300 - total flux cleaned = -0.00243416 Jy ! Component: 1350 - total flux cleaned = -0.00254085 Jy ! Component: 1400 - total flux cleaned = -0.0025757 Jy ! Component: 1450 - total flux cleaned = -0.00267947 Jy ! Component: 1500 - total flux cleaned = -0.00267901 Jy ! Component: 1550 - total flux cleaned = -0.00271264 Jy ! Component: 1600 - total flux cleaned = -0.00291448 Jy ! Component: 1650 - total flux cleaned = -0.00304718 Jy ! Component: 1700 - total flux cleaned = -0.00314585 Jy ! Component: 1750 - total flux cleaned = -0.00334139 Jy ! Component: 1800 - total flux cleaned = -0.00350285 Jy ! Component: 1850 - total flux cleaned = -0.00363055 Jy ! Component: 1900 - total flux cleaned = -0.00382009 Jy ! Component: 1950 - total flux cleaned = -0.00391438 Jy ! Component: 2000 - total flux cleaned = -0.00403859 Jy ! Component: 2050 - total flux cleaned = -0.00422333 Jy ! Component: 2100 - total flux cleaned = -0.00443673 Jy ! Component: 2150 - total flux cleaned = -0.00458785 Jy ! Component: 2200 - total flux cleaned = -0.00467809 Jy ! Component: 2250 - total flux cleaned = -0.00488635 Jy ! Component: 2300 - total flux cleaned = -0.00494542 Jy ! Component: 2350 - total flux cleaned = -0.00517986 Jy ! Component: 2400 - total flux cleaned = -0.00520912 Jy ! Component: 2450 - total flux cleaned = -0.00535356 Jy ! Component: 2500 - total flux cleaned = -0.00546807 Jy ! Component: 2550 - total flux cleaned = -0.00555359 Jy ! Component: 2600 - total flux cleaned = -0.00563868 Jy ! Component: 2650 - total flux cleaned = -0.0057513 Jy ! Component: 2700 - total flux cleaned = -0.00575125 Jy ! Component: 2750 - total flux cleaned = -0.00583496 Jy ! Component: 2800 - total flux cleaned = -0.00591832 Jy ! Component: 2850 - total flux cleaned = -0.00589072 Jy ! Component: 2900 - total flux cleaned = -0.00594576 Jy ! Component: 2950 - total flux cleaned = -0.00600061 Jy ! Component: 3000 - total flux cleaned = -0.00605528 Jy ! Component: 3050 - total flux cleaned = -0.00602775 Jy ! Component: 3100 - total flux cleaned = -0.00605495 Jy ! Component: 3150 - total flux cleaned = -0.00602762 Jy ! Component: 3200 - total flux cleaned = -0.00602768 Jy ! Component: 3250 - total flux cleaned = -0.00602772 Jy ! Component: 3300 - total flux cleaned = -0.00610931 Jy ! Component: 3350 - total flux cleaned = -0.00616344 Jy ! Component: 3400 - total flux cleaned = -0.00621755 Jy ! Component: 3450 - total flux cleaned = -0.00624454 Jy ! Component: 3500 - total flux cleaned = -0.00629851 Jy ! Component: 3550 - total flux cleaned = -0.00624436 Jy ! Component: 3600 - total flux cleaned = -0.00627131 Jy ! Component: 3650 - total flux cleaned = -0.00624428 Jy ! Component: 3700 - total flux cleaned = -0.00616315 Jy ! Component: 3750 - total flux cleaned = -0.0061903 Jy ! Component: 3800 - total flux cleaned = -0.00616323 Jy ! Component: 3850 - total flux cleaned = -0.00613614 Jy ! Component: 3900 - total flux cleaned = -0.00608181 Jy ! Component: 3950 - total flux cleaned = -0.00600024 Jy ! Component: 4000 - total flux cleaned = -0.00591859 Jy ! Component: 4050 - total flux cleaned = -0.00589139 Jy ! Total flux subtracted in 4096 components = -0.00578242 Jy ! Clean residual min=-0.001435 max=0.001782 Jy/beam ! Clean residual mean=-0.000001 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.552655 Jy keep ! Adding 198 model components to the UV plane model. ! The established model now contains 318 components and 0.552654 Jy ![Exited script file: muppet] wmap "J1018+3542_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.797 x 7.946 at 5.782 degrees (North through East) ! Clean map min=-0.0047939 max=0.48804 Jy/beam ! Writing clean map to FITS file: J1018+3542_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.488041 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000435577 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.26775 0.26775 0.535501 1.071 2.142 4.28401 8.56801 17.136 34.2721 68.5441 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.488 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.797 x 7.946 at 5.782 degrees (North through East) ! Clean map min=-0.0047939 max=0.48804 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1018+3542_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:11:09 2019