! Started logfile: J1017+6116_S_2017_01_21_pus_uvs.log on Sun May 5 15:52:15 2019 obs J1017+6116_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1017+6116_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.690972 visibilities/baseline/integration-bin. ! Found source: J1017+6116 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1017+6116_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.471616Jy sigma=0.003572 ! Fit after self-cal, rms=0.467508Jy sigma=0.003540 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.36 mas, bmaj=10.21 mas, bpa=-40.5 degrees ! Estimated noise=4294.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.41327 Jy ! Component: 100 - total flux cleaned = 0.513894 Jy ! Total flux subtracted in 100 components = 0.513894 Jy ! Clean residual min=-0.026918 max=0.047147 Jy/beam ! Clean residual mean=0.000054 rms=0.009456 Jy/beam ! Combined flux in latest and established models = 0.513894 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.513894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114124Jy sigma=0.000885 ! Fit after self-cal, rms=0.114108Jy sigma=0.000884 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.836 mas, bmaj=10.57 mas, bpa=-39.41 degrees ! Estimated noise=3477.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049301 Jy ! Component: 100 - total flux cleaned = 0.0691357 Jy ! Component: 150 - total flux cleaned = 0.0696859 Jy ! Component: 200 - total flux cleaned = 0.069333 Jy ! Total flux subtracted in 200 components = 0.069333 Jy ! Clean residual min=-0.013082 max=0.019442 Jy/beam ! Clean residual mean=0.000053 rms=0.004449 Jy/beam ! Combined flux in latest and established models = 0.583227 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 25 components and 0.583227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095436Jy sigma=0.000705 ! Fit after self-cal, rms=0.095424Jy sigma=0.000705 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.94 LA 1.03 ! MK 0.98 NL 0.96 OV 1.04 PT 0.98 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.96 LA 0.98 ! MK 0.98 NL 0.99 OV 1.14 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.96 LA 1.00 ! MK 0.99 NL 0.99 OV 1.02 PT 0.95 ! SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.99 LA 0.95 ! MK 1.35 NL 1.00* OV 1.02 PT 1.00 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.095424Jy sigma=0.000705 ! Fit after self-cal, rms=0.087848Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=10.55 mas, bpa=-39.49 degrees ! Estimated noise=3463.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334377 Jy ! Component: 100 - total flux cleaned = 0.00456701 Jy ! Component: 150 - total flux cleaned = 0.00525179 Jy ! Component: 200 - total flux cleaned = 0.00591799 Jy ! Total flux subtracted in 200 components = 0.00591799 Jy ! Clean residual min=-0.007638 max=0.008219 Jy/beam ! Clean residual mean=0.000004 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 0.589145 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.589145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087171Jy sigma=0.000632 ! Fit after self-cal, rms=0.087252Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087252Jy sigma=0.000631 ! Fit after self-cal, rms=0.087513Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=10.54 mas, bpa=-39.54 degrees ! Estimated noise=3470.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310794 Jy ! Component: 100 - total flux cleaned = 0.00354502 Jy ! Component: 150 - total flux cleaned = 0.00408365 Jy ! Component: 200 - total flux cleaned = 0.00460161 Jy ! Total flux subtracted in 200 components = 0.00460161 Jy ! Clean residual min=-0.007365 max=0.007148 Jy/beam ! Clean residual mean=0.000003 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 0.593747 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.593747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087249Jy sigma=0.000629 ! Fit after self-cal, rms=0.087251Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428983 Jy ! Component: 100 - total flux cleaned = 0.000787595 Jy ! Component: 150 - total flux cleaned = 0.000950083 Jy ! Component: 200 - total flux cleaned = 0.00100266 Jy ! Total flux subtracted in 200 components = 0.00100266 Jy ! Clean residual min=-0.007123 max=0.006939 Jy/beam ! Clean residual mean=0.000001 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 0.594749 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.594749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087164Jy sigma=0.000628 ! Fit after self-cal, rms=0.087160Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087160Jy sigma=0.000628 ! Fit after self-cal, rms=0.087300Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=10.53 mas, bpa=-39.59 degrees ! Estimated noise=3473.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224445 Jy ! Component: 100 - total flux cleaned = 0.00292925 Jy ! Component: 150 - total flux cleaned = 0.00331517 Jy ! Component: 200 - total flux cleaned = 0.00369273 Jy ! Total flux subtracted in 200 components = 0.00369273 Jy ! Clean residual min=-0.007145 max=0.006575 Jy/beam ! Clean residual mean=0.000000 rms=0.001846 Jy/beam ! Combined flux in latest and established models = 0.598442 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.598442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087196Jy sigma=0.000627 ! Fit after self-cal, rms=0.087198Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321252 Jy ! Component: 100 - total flux cleaned = 0.000405603 Jy ! Component: 150 - total flux cleaned = 0.000522938 Jy ! Component: 200 - total flux cleaned = 0.000596615 Jy ! Total flux subtracted in 200 components = 0.000596615 Jy ! Clean residual min=-0.007085 max=0.006525 Jy/beam ! Clean residual mean=-0.000001 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.599039 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.599039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087156Jy sigma=0.000627 ! Fit after self-cal, rms=0.087152Jy sigma=0.000627 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087152Jy sigma=0.000627 ! Fit after self-cal, rms=0.087224Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.356 mas, bmaj=10.61 mas, bpa=-42.59 degrees ! Estimated noise=4467.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176598 Jy ! Component: 100 - total flux cleaned = 0.00187844 Jy ! Component: 150 - total flux cleaned = 0.00192463 Jy ! Component: 200 - total flux cleaned = 0.00196705 Jy ! Total flux subtracted in 200 components = 0.00196705 Jy ! Clean residual min=-0.006775 max=0.006757 Jy/beam ! Clean residual mean=-0.000001 rms=0.002257 Jy/beam ! Combined flux in latest and established models = 0.601006 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.601005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087198Jy sigma=0.000627 ! Fit after self-cal, rms=0.087191Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018615 Jy ! Component: 100 - total flux cleaned = 0.00018589 Jy ! Component: 150 - total flux cleaned = 0.000114483 Jy ! Component: 200 - total flux cleaned = 8.05966e-05 Jy ! Total flux subtracted in 200 components = 8.05966e-05 Jy ! Clean residual min=-0.006739 max=0.006698 Jy/beam ! Clean residual mean=-0.000002 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.601086 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 100 components and 0.601086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087193Jy sigma=0.000627 ! Fit after self-cal, rms=0.087187Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=10.52 mas, bpa=-39.62 degrees ! Estimated noise=3475.82 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.828 x 10.52 at -39.62 degrees (North through East) ! Clean map min=-0.0067037 max=0.54728 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087187Jy sigma=0.000626 ! Fit after self-cal, rms=0.081267Jy sigma=0.000570 ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=10.52 mas, bpa=-39.63 degrees ! Estimated noise=3475.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150644 Jy ! Component: 100 - total flux cleaned = 0.00169516 Jy ! Component: 150 - total flux cleaned = 0.00169523 Jy ! Component: 200 - total flux cleaned = 0.0016948 Jy ! Total flux subtracted in 200 components = 0.0016948 Jy ! Clean residual min=-0.007419 max=0.006344 Jy/beam ! Clean residual mean=-0.000003 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.602781 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 109 components and 0.602781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081216Jy sigma=0.000570 ! Fit after self-cal, rms=0.081216Jy sigma=0.000570 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.4714e-05 Jy ! Component: 100 - total flux cleaned = 7.46304e-05 Jy ! Component: 150 - total flux cleaned = 0.000108642 Jy ! Component: 200 - total flux cleaned = 0.00017193 Jy ! Total flux subtracted in 200 components = 0.00017193 Jy ! Clean residual min=-0.007312 max=0.006329 Jy/beam ! Clean residual mean=-0.000003 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.602953 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 111 components and 0.602953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081183Jy sigma=0.000570 ! Fit after self-cal, rms=0.081179Jy sigma=0.000570 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081179Jy sigma=0.000570 ! Fit after self-cal, rms=0.081171Jy sigma=0.000570 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=10.12 mas, bpa=-40.77 degrees ! Estimated noise=4334.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.416475 Jy ! Component: 100 - total flux cleaned = 0.514679 Jy ! Component: 150 - total flux cleaned = 0.556081 Jy ! Component: 200 - total flux cleaned = 0.57323 Jy ! Total flux subtracted in 200 components = 0.57323 Jy ! Clean residual min=-0.012046 max=0.010744 Jy/beam ! Clean residual mean=0.000016 rms=0.003082 Jy/beam ! Combined flux in latest and established models = 0.57323 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.57323 Jy ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=10.52 mas, bpa=-39.64 degrees ! Estimated noise=3475.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115848 Jy ! Component: 100 - total flux cleaned = 0.016812 Jy ! Component: 150 - total flux cleaned = 0.019575 Jy ! Component: 200 - total flux cleaned = 0.0216856 Jy ! Total flux subtracted in 200 components = 0.0216856 Jy ! Clean residual min=-0.007658 max=0.006859 Jy/beam ! Clean residual mean=0.000011 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 0.594915 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.594915 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.349 mas, bmaj=10.61 mas, bpa=-42.66 degrees ! Estimated noise=4472.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449381 Jy ! Component: 100 - total flux cleaned = 0.00596409 Jy ! Component: 150 - total flux cleaned = 0.0068204 Jy ! Component: 200 - total flux cleaned = 0.00745281 Jy ! Total flux subtracted in 200 components = 0.00745281 Jy ! Clean residual min=-0.007334 max=0.006895 Jy/beam ! Clean residual mean=-0.000002 rms=0.002274 Jy/beam ! Combined flux in latest and established models = 0.602368 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177805 Jy ! Component: 100 - total flux cleaned = 0.000283738 Jy ! Component: 150 - total flux cleaned = 0.000427791 Jy ! Component: 200 - total flux cleaned = 0.00042742 Jy ! Total flux subtracted in 200 components = 0.00042742 Jy ! Clean residual min=-0.007208 max=0.006883 Jy/beam ! Clean residual mean=-0.000004 rms=0.002233 Jy/beam ! Combined flux in latest and established models = 0.602795 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 67 components and 0.602795 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=10.52 mas, bpa=-39.64 degrees ! Estimated noise=3475.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000324462 Jy ! Component: 100 - total flux cleaned = 0.000541623 Jy ! Component: 150 - total flux cleaned = 0.00117065 Jy ! Component: 200 - total flux cleaned = 0.00117048 Jy ! Total flux subtracted in 200 components = 0.00117048 Jy ! Clean residual min=-0.007551 max=0.006332 Jy/beam ! Clean residual mean=-0.000003 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 0.603966 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.603966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081378Jy sigma=0.000571 ! Fit after self-cal, rms=0.081399Jy sigma=0.000571 wmodel J1017+6116_S_2017_01_21_pus_map.mod ! Writing 77 model components to file: J1017+6116_S_2017_01_21_pus_map.mod wobs J1017+6116_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1017+6116_S_2017_01_21_pus_uvs.fits wwins J1017+6116_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1017+6116_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00262125 Jy ! Component: 100 - total flux cleaned = -0.00400162 Jy ! Component: 150 - total flux cleaned = -0.0046438 Jy ! Component: 200 - total flux cleaned = -0.00445114 Jy ! Component: 250 - total flux cleaned = -0.00426372 Jy ! Component: 300 - total flux cleaned = -0.00399012 Jy ! Component: 350 - total flux cleaned = -0.0039883 Jy ! Component: 400 - total flux cleaned = -0.00399072 Jy ! Component: 450 - total flux cleaned = -0.004227 Jy ! Component: 500 - total flux cleaned = -0.00407833 Jy ! Component: 550 - total flux cleaned = -0.00408 Jy ! Component: 600 - total flux cleaned = -0.00414707 Jy ! Component: 650 - total flux cleaned = -0.00421239 Jy ! Component: 700 - total flux cleaned = -0.00427465 Jy ! Component: 750 - total flux cleaned = -0.00414705 Jy ! Component: 800 - total flux cleaned = -0.00402608 Jy ! Component: 850 - total flux cleaned = -0.0040858 Jy ! Component: 900 - total flux cleaned = -0.00402777 Jy ! Component: 950 - total flux cleaned = -0.0038601 Jy ! Component: 1000 - total flux cleaned = -0.0038613 Jy ! Component: 1050 - total flux cleaned = -0.00386129 Jy ! Component: 1100 - total flux cleaned = -0.0039652 Jy ! Component: 1150 - total flux cleaned = -0.00406751 Jy ! Component: 1200 - total flux cleaned = -0.00416781 Jy ! Component: 1250 - total flux cleaned = -0.00421668 Jy ! Component: 1300 - total flux cleaned = -0.00421725 Jy ! Component: 1350 - total flux cleaned = -0.00407638 Jy ! Component: 1400 - total flux cleaned = -0.00389132 Jy ! Component: 1450 - total flux cleaned = -0.00384588 Jy ! Component: 1500 - total flux cleaned = -0.00366617 Jy ! Component: 1550 - total flux cleaned = -0.0034445 Jy ! Component: 1600 - total flux cleaned = -0.00340079 Jy ! Component: 1650 - total flux cleaned = -0.00309833 Jy ! Component: 1700 - total flux cleaned = -0.00288546 Jy ! Component: 1750 - total flux cleaned = -0.00275879 Jy ! Component: 1800 - total flux cleaned = -0.00263366 Jy ! Component: 1850 - total flux cleaned = -0.00246936 Jy ! Component: 1900 - total flux cleaned = -0.00234859 Jy ! Component: 1950 - total flux cleaned = -0.00234931 Jy ! Component: 2000 - total flux cleaned = -0.00234879 Jy ! Component: 2050 - total flux cleaned = -0.00219145 Jy ! Component: 2100 - total flux cleaned = -0.00223026 Jy ! Component: 2150 - total flux cleaned = -0.00219114 Jy ! Component: 2200 - total flux cleaned = -0.00226691 Jy ! Component: 2250 - total flux cleaned = -0.00226684 Jy ! Component: 2300 - total flux cleaned = -0.00223001 Jy ! Component: 2350 - total flux cleaned = -0.00230379 Jy ! Component: 2400 - total flux cleaned = -0.00234028 Jy ! Component: 2450 - total flux cleaned = -0.00237647 Jy ! Component: 2500 - total flux cleaned = -0.00226907 Jy ! Component: 2550 - total flux cleaned = -0.00226935 Jy ! Component: 2600 - total flux cleaned = -0.00219883 Jy ! Component: 2650 - total flux cleaned = -0.00209429 Jy ! Component: 2700 - total flux cleaned = -0.00199021 Jy ! Component: 2750 - total flux cleaned = -0.00185247 Jy ! Component: 2800 - total flux cleaned = -0.0018181 Jy ! Component: 2850 - total flux cleaned = -0.00171595 Jy ! Component: 2900 - total flux cleaned = -0.00154768 Jy ! Component: 2950 - total flux cleaned = -0.00148086 Jy ! Component: 3000 - total flux cleaned = -0.00141438 Jy ! Component: 3050 - total flux cleaned = -0.0013152 Jy ! Component: 3100 - total flux cleaned = -0.0012165 Jy ! Component: 3150 - total flux cleaned = -0.00115107 Jy ! Component: 3200 - total flux cleaned = -0.000955392 Jy ! Component: 3250 - total flux cleaned = -0.000922991 Jy ! Component: 3300 - total flux cleaned = -0.000858117 Jy ! Component: 3350 - total flux cleaned = -0.00063231 Jy ! Component: 3400 - total flux cleaned = -0.000600505 Jy ! Component: 3450 - total flux cleaned = -0.000632453 Jy ! Component: 3500 - total flux cleaned = -0.00040927 Jy ! Component: 3550 - total flux cleaned = -0.000313927 Jy ! Component: 3600 - total flux cleaned = -0.00028207 Jy ! Component: 3650 - total flux cleaned = -0.000186648 Jy ! Component: 3700 - total flux cleaned = -2.79243e-05 Jy ! Component: 3750 - total flux cleaned = 3.54496e-05 Jy ! Component: 3800 - total flux cleaned = 9.87849e-05 Jy ! Component: 3850 - total flux cleaned = 0.000193798 Jy ! Component: 3900 - total flux cleaned = 0.000288808 Jy ! Component: 3950 - total flux cleaned = 0.000383911 Jy ! Component: 4000 - total flux cleaned = 0.000479 Jy ! Component: 4050 - total flux cleaned = 0.000574244 Jy ! Total flux subtracted in 4096 components = 0.000701334 Jy ! Clean residual min=-0.001799 max=0.001836 Jy/beam ! Clean residual mean=0.000012 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.604667 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 352 components and 0.604667 Jy ![Exited script file: muppet] wmap "J1017+6116_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.828 x 10.52 at -39.64 degrees (North through East) ! Clean map min=-0.005668 max=0.54663 Jy/beam ! Writing clean map to FITS file: J1017+6116_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.546625 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000580564 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.318626 0.318626 0.637253 1.27451 2.54901 5.09802 10.196 20.3921 40.7842 81.5683 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.546 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.828 x 10.52 at -39.64 degrees (North through East) ! Clean map min=-0.005668 max=0.54663 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1017+6116_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:52:20 2019