! Started logfile: J1016+0513_S_2017_10_09_pus_uvs.log on Sun May 12 13:09:47 2019 obs J1016+0513_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1016+0513_S_2017_10_09_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.588889 visibilities/baseline/integration-bin. ! Found source: J1016+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1696 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1016+0513_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.879342Jy sigma=0.007550 ! Fit after self-cal, rms=0.871372Jy sigma=0.007492 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=12.78 mas, bpa=-21.48 degrees ! Estimated noise=2693.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100029 Jy ! Component: 100 - total flux cleaned = 0.122365 Jy ! Total flux subtracted in 100 components = 0.122365 Jy ! Clean residual min=-0.008743 max=0.008618 Jy/beam ! Clean residual mean=-0.000009 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.122365 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.122365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084833Jy sigma=0.000656 ! Fit after self-cal, rms=0.084828Jy sigma=0.000656 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=14.11 mas, bpa=-21.71 degrees ! Estimated noise=2413.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975563 Jy ! Component: 100 - total flux cleaned = 0.0125371 Jy ! Component: 150 - total flux cleaned = 0.0134545 Jy ! Component: 200 - total flux cleaned = 0.0138179 Jy ! Total flux subtracted in 200 components = 0.0138179 Jy ! Clean residual min=-0.006823 max=0.007371 Jy/beam ! Clean residual mean=-0.000011 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 0.136183 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 0.136183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083512Jy sigma=0.000648 ! Fit after self-cal, rms=0.083469Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.00 KP 1.06 ! LA 0.95 MK 0.92 NL 0.99 OV 1.00* ! PT 1.10 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.08 KP 1.04 ! LA 0.86 MK 1.10 NL 1.01 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.07 HN 1.04 KP 0.90 ! LA 0.83 MK 1.04 NL 1.14 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.31 HN 0.87 KP 1.00* ! LA 1.00* MK 0.97 NL 1.00* OV 1.00* ! PT 1.04 ! ! ! Fit before self-cal, rms=0.083469Jy sigma=0.000648 ! Fit after self-cal, rms=0.079319Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=13.85 mas, bpa=-21.97 degrees ! Estimated noise=2430.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00264434 Jy ! Component: 100 - total flux cleaned = -0.0027734 Jy ! Component: 150 - total flux cleaned = -0.00288209 Jy ! Component: 200 - total flux cleaned = -0.00292961 Jy ! Total flux subtracted in 200 components = -0.00292961 Jy ! Clean residual min=-0.005702 max=0.005335 Jy/beam ! Clean residual mean=0.000002 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.133253 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.133253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079184Jy sigma=0.000637 ! Fit after self-cal, rms=0.079171Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079171Jy sigma=0.000637 ! Fit after self-cal, rms=0.077902Jy sigma=0.000629 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=13.81 mas, bpa=-21.89 degrees ! Estimated noise=2419.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149481 Jy ! Component: 100 - total flux cleaned = -0.00179794 Jy ! Component: 150 - total flux cleaned = -0.00194268 Jy ! Component: 200 - total flux cleaned = -0.0019429 Jy ! Total flux subtracted in 200 components = -0.0019429 Jy ! Clean residual min=-0.005274 max=0.004885 Jy/beam ! Clean residual mean=0.000006 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.13131 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.13131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077845Jy sigma=0.000629 ! Fit after self-cal, rms=0.077885Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118031 Jy ! Component: 100 - total flux cleaned = -0.000151183 Jy ! Component: 150 - total flux cleaned = -0.000119936 Jy ! Component: 200 - total flux cleaned = -0.000150382 Jy ! Total flux subtracted in 200 components = -0.000150382 Jy ! Clean residual min=-0.005284 max=0.004850 Jy/beam ! Clean residual mean=0.000006 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.13116 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.13116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077858Jy sigma=0.000628 ! Fit after self-cal, rms=0.077858Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077858Jy sigma=0.000628 ! Fit after self-cal, rms=0.077824Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=13.83 mas, bpa=-21.86 degrees ! Estimated noise=2410.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000927885 Jy ! Component: 100 - total flux cleaned = -0.00120086 Jy ! Component: 150 - total flux cleaned = -0.00132091 Jy ! Component: 200 - total flux cleaned = -0.00140351 Jy ! Total flux subtracted in 200 components = -0.00140351 Jy ! Clean residual min=-0.005282 max=0.004706 Jy/beam ! Clean residual mean=0.000007 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.129756 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.129756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077790Jy sigma=0.000628 ! Fit after self-cal, rms=0.077796Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.83088e-05 Jy ! Component: 100 - total flux cleaned = -6.86956e-05 Jy ! Component: 150 - total flux cleaned = -9.45123e-05 Jy ! Component: 200 - total flux cleaned = -0.000119213 Jy ! Total flux subtracted in 200 components = -0.000119213 Jy ! Clean residual min=-0.005301 max=0.004674 Jy/beam ! Clean residual mean=0.000007 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.129637 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.129637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077775Jy sigma=0.000628 ! Fit after self-cal, rms=0.077776Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077776Jy sigma=0.000628 ! Fit after self-cal, rms=0.077744Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.633 mas, bmaj=14.25 mas, bpa=-24.37 degrees ! Estimated noise=2865.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000406092 Jy ! Component: 100 - total flux cleaned = -0.000574784 Jy ! Component: 150 - total flux cleaned = -0.000634082 Jy ! Component: 200 - total flux cleaned = -0.00071166 Jy ! Total flux subtracted in 200 components = -0.00071166 Jy ! Clean residual min=-0.004844 max=0.005221 Jy/beam ! Clean residual mean=0.000013 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.128925 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.128925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077736Jy sigma=0.000628 ! Fit after self-cal, rms=0.077738Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.46871e-05 Jy ! Component: 100 - total flux cleaned = -1.12312e-05 Jy ! Component: 150 - total flux cleaned = -3.48137e-05 Jy ! Component: 200 - total flux cleaned = -7.96834e-05 Jy ! Total flux subtracted in 200 components = -7.96834e-05 Jy ! Clean residual min=-0.004841 max=0.005200 Jy/beam ! Clean residual mean=0.000013 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.128846 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.128846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077736Jy sigma=0.000628 ! Fit after self-cal, rms=0.077735Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=13.86 mas, bpa=-21.84 degrees ! Estimated noise=2404.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.662 x 13.86 at -21.84 degrees (North through East) ! Clean map min=-0.0053574 max=0.12764 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=12.51 mas, bpa=-21.7 degrees ! Estimated noise=2696.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0989007 Jy ! Component: 100 - total flux cleaned = 0.121355 Jy ! Component: 150 - total flux cleaned = 0.126096 Jy ! Component: 200 - total flux cleaned = 0.126765 Jy ! Total flux subtracted in 200 components = 0.126765 Jy ! Clean residual min=-0.005994 max=0.006330 Jy/beam ! Clean residual mean=0.000005 rms=0.001648 Jy/beam ! Combined flux in latest and established models = 0.126765 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.126765 Jy ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=13.86 mas, bpa=-21.84 degrees ! Estimated noise=2404.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183873 Jy ! Component: 100 - total flux cleaned = 0.00181992 Jy ! Component: 150 - total flux cleaned = 0.00190503 Jy ! Component: 200 - total flux cleaned = 0.00190457 Jy ! Total flux subtracted in 200 components = 0.00190457 Jy ! Clean residual min=-0.005307 max=0.004800 Jy/beam ! Clean residual mean=0.000008 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.12867 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 46 components and 0.12867 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.633 mas, bmaj=14.25 mas, bpa=-24.37 degrees ! Estimated noise=2865.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711359 Jy ! Component: 100 - total flux cleaned = 0.000619984 Jy ! Component: 150 - total flux cleaned = 0.000450614 Jy ! Component: 200 - total flux cleaned = 0.000414364 Jy ! Total flux subtracted in 200 components = 0.000414364 Jy ! Clean residual min=-0.004706 max=0.005159 Jy/beam ! Clean residual mean=0.000014 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.129084 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.18726e-07 Jy ! Component: 100 - total flux cleaned = -3.05355e-05 Jy ! Component: 150 - total flux cleaned = -3.22998e-05 Jy ! Component: 200 - total flux cleaned = -5.91435e-05 Jy ! Total flux subtracted in 200 components = -5.91435e-05 Jy ! Clean residual min=-0.004729 max=0.005158 Jy/beam ! Clean residual mean=0.000013 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.129025 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.129025 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=13.86 mas, bpa=-21.84 degrees ! Estimated noise=2404.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.24207e-06 Jy ! Component: 100 - total flux cleaned = 5.89336e-05 Jy ! Component: 150 - total flux cleaned = 5.94172e-05 Jy ! Component: 200 - total flux cleaned = -1.70414e-05 Jy ! Total flux subtracted in 200 components = -1.70414e-05 Jy ! Clean residual min=-0.005276 max=0.004631 Jy/beam ! Clean residual mean=0.000008 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.129008 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.129008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077772Jy sigma=0.000628 ! Fit after self-cal, rms=0.077770Jy sigma=0.000628 wmodel J1016+0513_S_2017_10_09_pus_map.mod ! Writing 76 model components to file: J1016+0513_S_2017_10_09_pus_map.mod wobs J1016+0513_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1016+0513_S_2017_10_09_pus_uvs.fits wwins J1016+0513_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1016+0513_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000684132 Jy ! Component: 100 - total flux cleaned = -0.000760252 Jy ! Component: 150 - total flux cleaned = -0.000991922 Jy ! Component: 200 - total flux cleaned = -0.0011362 Jy ! Component: 250 - total flux cleaned = -0.00106792 Jy ! Component: 300 - total flux cleaned = -0.00139408 Jy ! Component: 350 - total flux cleaned = -0.00145438 Jy ! Component: 400 - total flux cleaned = -0.0014539 Jy ! Component: 450 - total flux cleaned = -0.00151224 Jy ! Component: 500 - total flux cleaned = -0.00156874 Jy ! Component: 550 - total flux cleaned = -0.0014598 Jy ! Component: 600 - total flux cleaned = -0.00140833 Jy ! Component: 650 - total flux cleaned = -0.00140929 Jy ! Component: 700 - total flux cleaned = -0.00145883 Jy ! Component: 750 - total flux cleaned = -0.00155447 Jy ! Component: 800 - total flux cleaned = -0.00150603 Jy ! Component: 850 - total flux cleaned = -0.0013684 Jy ! Component: 900 - total flux cleaned = -0.00141472 Jy ! Component: 950 - total flux cleaned = -0.00159034 Jy ! Component: 1000 - total flux cleaned = -0.0015884 Jy ! Component: 1050 - total flux cleaned = -0.00163042 Jy ! Component: 1100 - total flux cleaned = -0.0017134 Jy ! Component: 1150 - total flux cleaned = -0.00175401 Jy ! Component: 1200 - total flux cleaned = -0.00167555 Jy ! Component: 1250 - total flux cleaned = -0.00179249 Jy ! Component: 1300 - total flux cleaned = -0.0018682 Jy ! Component: 1350 - total flux cleaned = -0.00190506 Jy ! Component: 1400 - total flux cleaned = -0.00208982 Jy ! Component: 1450 - total flux cleaned = -0.00216323 Jy ! Component: 1500 - total flux cleaned = -0.0023434 Jy ! Component: 1550 - total flux cleaned = -0.00244967 Jy ! Component: 1600 - total flux cleaned = -0.00265791 Jy ! Component: 1650 - total flux cleaned = -0.00272606 Jy ! Component: 1700 - total flux cleaned = -0.0028274 Jy ! Component: 1750 - total flux cleaned = -0.0029268 Jy ! Component: 1800 - total flux cleaned = -0.00299209 Jy ! Component: 1850 - total flux cleaned = -0.00312169 Jy ! Component: 1900 - total flux cleaned = -0.0033137 Jy ! Component: 1950 - total flux cleaned = -0.00334554 Jy ! Component: 2000 - total flux cleaned = -0.00347032 Jy ! Component: 2050 - total flux cleaned = -0.00362455 Jy ! Component: 2100 - total flux cleaned = -0.00365509 Jy ! Component: 2150 - total flux cleaned = -0.00374622 Jy ! Component: 2200 - total flux cleaned = -0.00380592 Jy ! Component: 2250 - total flux cleaned = -0.00398246 Jy ! Component: 2300 - total flux cleaned = -0.00401127 Jy ! Component: 2350 - total flux cleaned = -0.00409725 Jy ! Component: 2400 - total flux cleaned = -0.00415449 Jy ! Component: 2450 - total flux cleaned = -0.00426761 Jy ! Component: 2500 - total flux cleaned = -0.00446328 Jy ! Component: 2550 - total flux cleaned = -0.00462919 Jy ! Component: 2600 - total flux cleaned = -0.00476622 Jy ! Component: 2650 - total flux cleaned = -0.00495512 Jy ! Component: 2700 - total flux cleaned = -0.00503524 Jy ! Component: 2750 - total flux cleaned = -0.00511495 Jy ! Component: 2800 - total flux cleaned = -0.00527319 Jy ! Component: 2850 - total flux cleaned = -0.00542978 Jy ! Component: 2900 - total flux cleaned = -0.00563659 Jy ! Component: 2950 - total flux cleaned = -0.00571343 Jy ! Component: 3000 - total flux cleaned = -0.00584082 Jy ! Component: 3050 - total flux cleaned = -0.00604243 Jy ! Component: 3100 - total flux cleaned = -0.00611729 Jy ! Component: 3150 - total flux cleaned = -0.00626569 Jy ! Component: 3200 - total flux cleaned = -0.006364 Jy ! Component: 3250 - total flux cleaned = -0.00648561 Jy ! Component: 3300 - total flux cleaned = -0.00653399 Jy ! Component: 3350 - total flux cleaned = -0.00660589 Jy ! Component: 3400 - total flux cleaned = -0.00670098 Jy ! Component: 3450 - total flux cleaned = -0.0067953 Jy ! Component: 3500 - total flux cleaned = -0.00686551 Jy ! Component: 3550 - total flux cleaned = -0.00686536 Jy ! Component: 3600 - total flux cleaned = -0.00695759 Jy ! Component: 3650 - total flux cleaned = -0.00702643 Jy ! Component: 3700 - total flux cleaned = -0.00711706 Jy ! Component: 3750 - total flux cleaned = -0.00720719 Jy ! Component: 3800 - total flux cleaned = -0.00727415 Jy ! Component: 3850 - total flux cleaned = -0.00734089 Jy ! Component: 3900 - total flux cleaned = -0.00740691 Jy ! Component: 3950 - total flux cleaned = -0.00747269 Jy ! Component: 4000 - total flux cleaned = -0.00758151 Jy ! Component: 4050 - total flux cleaned = -0.00764606 Jy ! Total flux subtracted in 4096 components = -0.00771048 Jy ! Clean residual min=-0.001219 max=0.001159 Jy/beam ! Clean residual mean=-0.000006 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.121297 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 315 components and 0.121297 Jy ![Exited script file: muppet] wmap "J1016+0513_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.662 x 13.86 at -21.84 degrees (North through East) ! Clean map min=-0.0042123 max=0.12758 Jy/beam ! Writing clean map to FITS file: J1016+0513_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127577 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000364844 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.857939 0.857939 1.71588 3.43176 6.86351 13.727 27.4541 54.9081 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.662 x 13.86 at -21.84 degrees (North through East) ! Clean map min=-0.0042123 max=0.12758 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1016+0513_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:09:52 2019