! Started logfile: J1016+0513_S_2017_09_26_pus_uvs.log on Sat May 11 13:00:05 2019 obs J1016+0513_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1016+0513_S_2017_09_26_pus_uva.fits ! AN table 1: 25 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.686667 visibilities/baseline/integration-bin. ! Found source: J1016+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 2472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1016+0513_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.890241Jy sigma=0.007529 ! Fit after self-cal, rms=0.881329Jy sigma=0.007475 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=13.03 mas, bpa=-19.99 degrees ! Estimated noise=2287.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0935261 Jy ! Component: 100 - total flux cleaned = 0.115341 Jy ! Total flux subtracted in 100 components = 0.115341 Jy ! Clean residual min=-0.006902 max=0.008839 Jy/beam ! Clean residual mean=-0.000026 rms=0.002057 Jy/beam ! Combined flux in latest and established models = 0.115341 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.115341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083958Jy sigma=0.000660 ! Fit after self-cal, rms=0.083951Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=13.26 mas, bpa=-20.14 degrees ! Estimated noise=1880.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104703 Jy ! Component: 100 - total flux cleaned = 0.0160225 Jy ! Component: 150 - total flux cleaned = 0.0193709 Jy ! Component: 200 - total flux cleaned = 0.0207385 Jy ! Total flux subtracted in 200 components = 0.0207385 Jy ! Clean residual min=-0.004694 max=0.005260 Jy/beam ! Clean residual mean=-0.000019 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.136079 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 59 components and 0.136079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082730Jy sigma=0.000648 ! Fit after self-cal, rms=0.082758Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.96 KP 1.01 ! LA 0.96 MK 1.05 NL 0.86 OV 1.07 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 1.03 KP 1.00 ! LA 0.97 MK 0.98 NL 1.05 OV 1.01 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.01 KP 0.97 ! LA 0.98 MK 1.02 NL 1.04 OV 1.00 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.06 KP 1.00* ! LA 1.08 MK 1.10 NL 1.00* OV 1.27 ! PT 0.94 ! ! ! Fit before self-cal, rms=0.082758Jy sigma=0.000648 ! Fit after self-cal, rms=0.084185Jy sigma=0.000643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=13.26 mas, bpa=-20.08 degrees ! Estimated noise=1875.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.56217e-05 Jy ! Component: 100 - total flux cleaned = 8.33171e-05 Jy ! Component: 150 - total flux cleaned = 4.3724e-05 Jy ! Component: 200 - total flux cleaned = 4.26709e-05 Jy ! Total flux subtracted in 200 components = 4.26709e-05 Jy ! Clean residual min=-0.004574 max=0.004505 Jy/beam ! Clean residual mean=-0.000008 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.136122 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.136122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084118Jy sigma=0.000643 ! Fit after self-cal, rms=0.084327Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084327Jy sigma=0.000643 ! Fit after self-cal, rms=0.103421Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=13.33 mas, bpa=-19.98 degrees ! Estimated noise=1876.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116246 Jy ! Component: 100 - total flux cleaned = 0.00136067 Jy ! Component: 150 - total flux cleaned = 0.00148965 Jy ! Component: 200 - total flux cleaned = 0.00154731 Jy ! Total flux subtracted in 200 components = 0.00154731 Jy ! Clean residual min=-0.003834 max=0.004626 Jy/beam ! Clean residual mean=-0.000015 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.137669 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.137669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103344Jy sigma=0.000636 ! Fit after self-cal, rms=0.105460Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, 37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294072 Jy ! Component: 100 - total flux cleaned = 0.00304182 Jy ! Component: 150 - total flux cleaned = 0.00312152 Jy ! Component: 200 - total flux cleaned = 0.00319254 Jy ! Total flux subtracted in 200 components = 0.00319254 Jy ! Clean residual min=-0.004087 max=0.003946 Jy/beam ! Clean residual mean=-0.000014 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.140862 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 119 components and 0.140862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105140Jy sigma=0.000633 ! Fit after self-cal, rms=0.105210Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105210Jy sigma=0.000633 ! Fit after self-cal, rms=0.195406Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=13.33 mas, bpa=-19.99 degrees ! Estimated noise=1872.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000608946 Jy ! Component: 100 - total flux cleaned = 0.000783073 Jy ! Component: 150 - total flux cleaned = 0.000942353 Jy ! Component: 200 - total flux cleaned = 0.00108995 Jy ! Total flux subtracted in 200 components = 0.00108995 Jy ! Clean residual min=-0.003863 max=0.003997 Jy/beam ! Clean residual mean=-0.000013 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.141952 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 129 components and 0.141952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195334Jy sigma=0.000632 ! Fit after self-cal, rms=0.196132Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.10959e-05 Jy ! Component: 100 - total flux cleaned = 3.83394e-05 Jy ! Component: 150 - total flux cleaned = 0.000164665 Jy ! Component: 200 - total flux cleaned = 0.000204267 Jy ! Total flux subtracted in 200 components = 0.000204267 Jy ! Clean residual min=-0.003882 max=0.004002 Jy/beam ! Clean residual mean=-0.000012 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.142156 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 138 components and 0.142156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196098Jy sigma=0.000632 ! Fit after self-cal, rms=0.196111Jy sigma=0.000632 ! Inverting map ! Added new window around map position (91.5, 42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000753303 Jy ! Component: 100 - total flux cleaned = 0.000382345 Jy ! Component: 150 - total flux cleaned = 0.000235435 Jy ! Component: 200 - total flux cleaned = 0.000230635 Jy ! Total flux subtracted in 200 components = 0.000230635 Jy ! Clean residual min=-0.003732 max=0.003392 Jy/beam ! Clean residual mean=-0.000013 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.142387 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 164 components and 0.142387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195965Jy sigma=0.000630 ! Fit after self-cal, rms=0.196038Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196038Jy sigma=0.000630 ! Fit after self-cal, rms=0.313918Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.675 mas, bmaj=13.93 mas, bpa=-15.57 degrees ! Estimated noise=2168.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.1553e-05 Jy ! Component: 100 - total flux cleaned = -0.000438511 Jy ! Component: 150 - total flux cleaned = -0.000687024 Jy ! Component: 200 - total flux cleaned = -0.000773057 Jy ! Total flux subtracted in 200 components = -0.000773057 Jy ! Clean residual min=-0.003101 max=0.002854 Jy/beam ! Clean residual mean=-0.000023 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.141614 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 182 components and 0.141614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313932Jy sigma=0.000629 ! Fit after self-cal, rms=0.314121Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136979 Jy ! Component: 100 - total flux cleaned = -9.79907e-05 Jy ! Component: 150 - total flux cleaned = -9.89788e-05 Jy ! Component: 200 - total flux cleaned = -2.92885e-05 Jy ! Total flux subtracted in 200 components = -2.92885e-05 Jy ! Clean residual min=-0.003039 max=0.002859 Jy/beam ! Clean residual mean=-0.000021 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.141584 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 191 components and 0.141584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314116Jy sigma=0.000629 ! Fit after self-cal, rms=0.314127Jy sigma=0.000629 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=13.34 mas, bpa=-20 degrees ! Estimated noise=1873.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.827 x 13.34 at -20 degrees (North through East) ! Clean map min=-0.003487 max=0.12184 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=13.1 mas, bpa=-19.82 degrees ! Estimated noise=2305.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0928638 Jy ! Component: 100 - total flux cleaned = 0.114355 Jy ! Component: 150 - total flux cleaned = 0.122045 Jy ! Component: 200 - total flux cleaned = 0.126639 Jy ! Total flux subtracted in 200 components = 0.126639 Jy ! Clean residual min=-0.005816 max=0.005339 Jy/beam ! Clean residual mean=-0.000020 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.126639 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.126639 Jy ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=13.34 mas, bpa=-20 degrees ! Estimated noise=1873.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394116 Jy ! Component: 100 - total flux cleaned = 0.00590403 Jy ! Component: 150 - total flux cleaned = 0.00743168 Jy ! Component: 200 - total flux cleaned = 0.00829484 Jy ! Total flux subtracted in 200 components = 0.00829484 Jy ! Clean residual min=-0.004070 max=0.004007 Jy/beam ! Clean residual mean=-0.000028 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.134934 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 53 components and 0.134934 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.675 mas, bmaj=13.93 mas, bpa=-15.57 degrees ! Estimated noise=2168.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524649 Jy ! Component: 100 - total flux cleaned = 0.00164587 Jy ! Component: 150 - total flux cleaned = 0.00239261 Jy ! Component: 200 - total flux cleaned = 0.00280938 Jy ! Total flux subtracted in 200 components = 0.00280938 Jy ! Clean residual min=-0.003655 max=0.003451 Jy/beam ! Clean residual mean=-0.000035 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.137744 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437925 Jy ! Component: 100 - total flux cleaned = 0.000835974 Jy ! Component: 150 - total flux cleaned = 0.00125963 Jy ! Component: 200 - total flux cleaned = 0.00148168 Jy ! Total flux subtracted in 200 components = 0.00148168 Jy ! Clean residual min=-0.003410 max=0.003096 Jy/beam ! Clean residual mean=-0.000028 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.139225 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 115 components and 0.139225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=13.34 mas, bpa=-20 degrees ! Estimated noise=1873.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000700017 Jy ! Component: 100 - total flux cleaned = 0.00102431 Jy ! Component: 150 - total flux cleaned = 0.00146652 Jy ! Component: 200 - total flux cleaned = 0.00180786 Jy ! Total flux subtracted in 200 components = 0.00180786 Jy ! Clean residual min=-0.003717 max=0.003089 Jy/beam ! Clean residual mean=-0.000015 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.141033 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.141033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314370Jy sigma=0.000630 ! Fit after self-cal, rms=0.314337Jy sigma=0.000630 wmodel J1016+0513_S_2017_09_26_pus_map.mod ! Writing 135 model components to file: J1016+0513_S_2017_09_26_pus_map.mod wobs J1016+0513_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1016+0513_S_2017_09_26_pus_uvs.fits wwins J1016+0513_S_2017_09_26_pus_map.win ! wwins: Wrote 3 windows to J1016+0513_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110939 Jy ! Component: 100 - total flux cleaned = -0.00155917 Jy ! Component: 150 - total flux cleaned = -0.00193047 Jy ! Component: 200 - total flux cleaned = -0.00223392 Jy ! Component: 250 - total flux cleaned = -0.00266871 Jy ! Component: 300 - total flux cleaned = -0.00285411 Jy ! Component: 350 - total flux cleaned = -0.00289904 Jy ! Component: 400 - total flux cleaned = -0.00302899 Jy ! Component: 450 - total flux cleaned = -0.00311375 Jy ! Component: 500 - total flux cleaned = -0.00315449 Jy ! Component: 550 - total flux cleaned = -0.00327458 Jy ! Component: 600 - total flux cleaned = -0.00327411 Jy ! Component: 650 - total flux cleaned = -0.00335172 Jy ! Component: 700 - total flux cleaned = -0.00350378 Jy ! Component: 750 - total flux cleaned = -0.00354121 Jy ! Component: 800 - total flux cleaned = -0.00368721 Jy ! Component: 850 - total flux cleaned = -0.00372238 Jy ! Component: 900 - total flux cleaned = -0.00382816 Jy ! Component: 950 - total flux cleaned = -0.00389868 Jy ! Component: 1000 - total flux cleaned = -0.00400188 Jy ! Component: 1050 - total flux cleaned = -0.0040693 Jy ! Component: 1100 - total flux cleaned = -0.00413518 Jy ! Component: 1150 - total flux cleaned = -0.00423324 Jy ! Component: 1200 - total flux cleaned = -0.00436179 Jy ! Component: 1250 - total flux cleaned = -0.00455099 Jy ! Component: 1300 - total flux cleaned = -0.00461337 Jy ! Component: 1350 - total flux cleaned = -0.0048292 Jy ! Component: 1400 - total flux cleaned = -0.00488961 Jy ! Component: 1450 - total flux cleaned = -0.00507003 Jy ! Component: 1500 - total flux cleaned = -0.00515925 Jy ! Component: 1550 - total flux cleaned = -0.00527675 Jy ! Component: 1600 - total flux cleaned = -0.00542209 Jy ! Component: 1650 - total flux cleaned = -0.00550852 Jy ! Component: 1700 - total flux cleaned = -0.00567902 Jy ! Component: 1750 - total flux cleaned = -0.00579167 Jy ! Component: 1800 - total flux cleaned = -0.00598681 Jy ! Component: 1850 - total flux cleaned = -0.00606957 Jy ! Component: 1900 - total flux cleaned = -0.00617888 Jy ! Component: 1950 - total flux cleaned = -0.00636842 Jy ! Component: 2000 - total flux cleaned = -0.00650209 Jy ! Component: 2050 - total flux cleaned = -0.00655497 Jy ! Component: 2100 - total flux cleaned = -0.00668663 Jy ! Component: 2150 - total flux cleaned = -0.00681685 Jy ! Component: 2200 - total flux cleaned = -0.00689399 Jy ! Component: 2250 - total flux cleaned = -0.0069195 Jy ! Component: 2300 - total flux cleaned = -0.00704612 Jy ! Component: 2350 - total flux cleaned = -0.00712149 Jy ! Component: 2400 - total flux cleaned = -0.00722108 Jy ! Component: 2450 - total flux cleaned = -0.00729513 Jy ! Component: 2500 - total flux cleaned = -0.00729532 Jy ! Component: 2550 - total flux cleaned = -0.00734394 Jy ! Component: 2600 - total flux cleaned = -0.00741571 Jy ! Component: 2650 - total flux cleaned = -0.00743974 Jy ! Component: 2700 - total flux cleaned = -0.00748706 Jy ! Component: 2750 - total flux cleaned = -0.00753415 Jy ! Component: 2800 - total flux cleaned = -0.00765041 Jy ! Component: 2850 - total flux cleaned = -0.00765048 Jy ! Component: 2900 - total flux cleaned = -0.00778786 Jy ! Component: 2950 - total flux cleaned = -0.00794694 Jy ! Component: 3000 - total flux cleaned = -0.00799208 Jy ! Component: 3050 - total flux cleaned = -0.00814911 Jy ! Component: 3100 - total flux cleaned = -0.00819369 Jy ! Component: 3150 - total flux cleaned = -0.00830469 Jy ! Component: 3200 - total flux cleaned = -0.00839284 Jy ! Component: 3250 - total flux cleaned = -0.00856802 Jy ! Component: 3300 - total flux cleaned = -0.00869859 Jy ! Component: 3350 - total flux cleaned = -0.00882849 Jy ! Component: 3400 - total flux cleaned = -0.00891466 Jy ! Component: 3450 - total flux cleaned = -0.00902188 Jy ! Component: 3500 - total flux cleaned = -0.00912842 Jy ! Component: 3550 - total flux cleaned = -0.0092134 Jy ! Component: 3600 - total flux cleaned = -0.00929796 Jy ! Component: 3650 - total flux cleaned = -0.00940312 Jy ! Component: 3700 - total flux cleaned = -0.00952853 Jy ! Component: 3750 - total flux cleaned = -0.00965329 Jy ! Component: 3800 - total flux cleaned = -0.00977731 Jy ! Component: 3850 - total flux cleaned = -0.00979791 Jy ! Component: 3900 - total flux cleaned = -0.00988 Jy ! Component: 3950 - total flux cleaned = -0.0100229 Jy ! Component: 4000 - total flux cleaned = -0.0100431 Jy ! Component: 4050 - total flux cleaned = -0.0100837 Jy ! Total flux subtracted in 4096 components = -0.0101444 Jy ! Clean residual min=-0.001170 max=0.001119 Jy/beam ! Clean residual mean=-0.000004 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.130889 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 366 components and 0.130889 Jy ![Exited script file: muppet] wmap "J1016+0513_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.827 x 13.34 at -20 degrees (North through East) ! Clean map min=-0.0035967 max=0.12148 Jy/beam ! Writing clean map to FITS file: J1016+0513_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121479 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000352473 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.870455 0.870455 1.74091 3.48182 6.96364 13.9273 27.8546 55.7091 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.827 x 13.34 at -20 degrees (North through East) ! Clean map min=-0.0035967 max=0.12148 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1016+0513_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:00:09 2019