! Started logfile: J1016+0513_S_2017_08_05_pus_uvs.log on Thu May 9 19:26:42 2019 obs J1016+0513_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1016+0513_S_2017_08_05_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.87 visibilities/baseline/integration-bin. ! Found source: J1016+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 3132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1016+0513_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920159Jy sigma=0.007723 ! Fit after self-cal, rms=0.894240Jy sigma=0.007535 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=7.027 mas, bpa=-5.322 degrees ! Estimated noise=2137.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0822488 Jy ! Component: 100 - total flux cleaned = 0.102737 Jy ! Total flux subtracted in 100 components = 0.102737 Jy ! Clean residual min=-0.007988 max=0.008714 Jy/beam ! Clean residual mean=-0.000007 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.102737 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.102737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086667Jy sigma=0.000678 ! Fit after self-cal, rms=0.086647Jy sigma=0.000677 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=7.791 mas, bpa=-3.572 degrees ! Estimated noise=1786.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117808 Jy ! Component: 100 - total flux cleaned = 0.0178485 Jy ! Component: 150 - total flux cleaned = 0.0211676 Jy ! Component: 200 - total flux cleaned = 0.023155 Jy ! Total flux subtracted in 200 components = 0.023155 Jy ! Clean residual min=-0.006020 max=0.005164 Jy/beam ! Clean residual mean=-0.000003 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.125892 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 39 components and 0.125892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084994Jy sigma=0.000665 ! Fit after self-cal, rms=0.085001Jy sigma=0.000665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.92 HN 0.99 KP 1.03 ! LA 1.01 MK 1.09 NL 0.89 OV 0.99 ! PT 1.07 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 0.94 KP 1.09 ! LA 0.96 MK 1.03 NL 1.03 OV 1.07 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.00 KP 0.92 ! LA 0.76 MK 1.03 NL 1.14 OV 0.99 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.94 KP 1.00* ! LA 1.00* MK 1.03 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.085001Jy sigma=0.000665 ! Fit after self-cal, rms=0.082528Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=7.861 mas, bpa=-3.281 degrees ! Estimated noise=1787.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000814036 Jy ! Component: 100 - total flux cleaned = -0.001013 Jy ! Component: 150 - total flux cleaned = -0.00113089 Jy ! Component: 200 - total flux cleaned = -0.00118525 Jy ! Total flux subtracted in 200 components = -0.00118525 Jy ! Clean residual min=-0.005798 max=0.004310 Jy/beam ! Clean residual mean=-0.000005 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.124707 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.124707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082500Jy sigma=0.000658 ! Fit after self-cal, rms=0.082486Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082486Jy sigma=0.000657 ! Fit after self-cal, rms=0.082867Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=7.852 mas, bpa=-3.493 degrees ! Estimated noise=1784.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000744029 Jy ! Component: 100 - total flux cleaned = -0.000717956 Jy ! Component: 150 - total flux cleaned = -0.000717067 Jy ! Component: 200 - total flux cleaned = -0.000775221 Jy ! Total flux subtracted in 200 components = -0.000775221 Jy ! Clean residual min=-0.005284 max=0.004187 Jy/beam ! Clean residual mean=-0.000006 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.123932 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.123932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082843Jy sigma=0.000652 ! Fit after self-cal, rms=0.082945Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.5227e-05 Jy ! Component: 100 - total flux cleaned = -7.13691e-05 Jy ! Component: 150 - total flux cleaned = -8.64478e-05 Jy ! Component: 200 - total flux cleaned = -8.73056e-05 Jy ! Total flux subtracted in 200 components = -8.73056e-05 Jy ! Clean residual min=-0.005213 max=0.004142 Jy/beam ! Clean residual mean=-0.000006 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.123844 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.123844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082939Jy sigma=0.000652 ! Fit after self-cal, rms=0.082938Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082938Jy sigma=0.000652 ! Fit after self-cal, rms=0.083252Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=7.844 mas, bpa=-3.277 degrees ! Estimated noise=1784.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00040832 Jy ! Component: 100 - total flux cleaned = -0.000410636 Jy ! Component: 150 - total flux cleaned = -0.000410503 Jy ! Component: 200 - total flux cleaned = -0.000435595 Jy ! Total flux subtracted in 200 components = -0.000435595 Jy ! Clean residual min=-0.005243 max=0.004162 Jy/beam ! Clean residual mean=-0.000006 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.123409 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.123409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083243Jy sigma=0.000652 ! Fit after self-cal, rms=0.083285Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.35741e-05 Jy ! Component: 100 - total flux cleaned = -1.35452e-05 Jy ! Component: 150 - total flux cleaned = -1.35556e-05 Jy ! Component: 200 - total flux cleaned = -2.39881e-05 Jy ! Total flux subtracted in 200 components = -2.39881e-05 Jy ! Clean residual min=-0.005223 max=0.004159 Jy/beam ! Clean residual mean=-0.000006 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.123385 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.123385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083282Jy sigma=0.000652 ! Fit after self-cal, rms=0.083282Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083282Jy sigma=0.000652 ! Fit after self-cal, rms=0.083485Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.58 mas, bmaj=12.41 mas, bpa=-4.101 degrees ! Estimated noise=2209.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406875 Jy ! Component: 100 - total flux cleaned = 0.000407039 Jy ! Component: 150 - total flux cleaned = 0.000406573 Jy ! Component: 200 - total flux cleaned = 0.000393642 Jy ! Total flux subtracted in 200 components = 0.000393642 Jy ! Clean residual min=-0.004929 max=0.004391 Jy/beam ! Clean residual mean=-0.000012 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.123779 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.123779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083486Jy sigma=0.000652 ! Fit after self-cal, rms=0.083503Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.4349e-05 Jy ! Component: 100 - total flux cleaned = 3.69825e-05 Jy ! Component: 150 - total flux cleaned = 3.6697e-05 Jy ! Component: 200 - total flux cleaned = 2.68864e-05 Jy ! Total flux subtracted in 200 components = 2.68864e-05 Jy ! Clean residual min=-0.004931 max=0.004373 Jy/beam ! Clean residual mean=-0.000012 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.123805 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.123805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083507Jy sigma=0.000652 ! Fit after self-cal, rms=0.083506Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=7.841 mas, bpa=-3.094 degrees ! Estimated noise=1785.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.294 x 7.841 at -3.094 degrees (North through East) ! Clean map min=-0.0050158 max=0.10796 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=7.039 mas, bpa=-4.904 degrees ! Estimated noise=2180.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0824201 Jy ! Component: 100 - total flux cleaned = 0.102239 Jy ! Component: 150 - total flux cleaned = 0.111792 Jy ! Component: 200 - total flux cleaned = 0.117314 Jy ! Total flux subtracted in 200 components = 0.117314 Jy ! Clean residual min=-0.006619 max=0.004289 Jy/beam ! Clean residual mean=-0.000006 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.117314 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.117314 Jy ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=7.841 mas, bpa=-3.094 degrees ! Estimated noise=1785.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354156 Jy ! Component: 100 - total flux cleaned = 0.0053154 Jy ! Component: 150 - total flux cleaned = 0.00587261 Jy ! Component: 200 - total flux cleaned = 0.00590643 Jy ! Total flux subtracted in 200 components = 0.00590643 Jy ! Clean residual min=-0.005386 max=0.004196 Jy/beam ! Clean residual mean=-0.000006 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.123221 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.123221 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.58 mas, bmaj=12.41 mas, bpa=-4.101 degrees ! Estimated noise=2209.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000752551 Jy ! Component: 100 - total flux cleaned = 0.000773079 Jy ! Component: 150 - total flux cleaned = 0.000773103 Jy ! Component: 200 - total flux cleaned = 0.000756247 Jy ! Total flux subtracted in 200 components = 0.000756247 Jy ! Clean residual min=-0.004875 max=0.004362 Jy/beam ! Clean residual mean=-0.000012 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.123977 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.64521e-05 Jy ! Component: 100 - total flux cleaned = -3.23565e-05 Jy ! Component: 150 - total flux cleaned = -3.20555e-05 Jy ! Component: 200 - total flux cleaned = -4.64961e-05 Jy ! Total flux subtracted in 200 components = -4.64961e-05 Jy ! Clean residual min=-0.004879 max=0.004350 Jy/beam ! Clean residual mean=-0.000012 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.12393 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.12393 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=7.841 mas, bpa=-3.094 degrees ! Estimated noise=1785.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0004944 Jy ! Component: 100 - total flux cleaned = -0.000520224 Jy ! Component: 150 - total flux cleaned = -0.0005205 Jy ! Component: 200 - total flux cleaned = -0.000540899 Jy ! Total flux subtracted in 200 components = -0.000540899 Jy ! Clean residual min=-0.005319 max=0.004165 Jy/beam ! Clean residual mean=-0.000006 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.123389 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.123389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083531Jy sigma=0.000652 ! Fit after self-cal, rms=0.083526Jy sigma=0.000652 wmodel J1016+0513_S_2017_08_05_pus_map.mod ! Writing 59 model components to file: J1016+0513_S_2017_08_05_pus_map.mod wobs J1016+0513_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1016+0513_S_2017_08_05_pus_uvs.fits wwins J1016+0513_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J1016+0513_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017889 Jy ! Component: 100 - total flux cleaned = -0.00236793 Jy ! Component: 150 - total flux cleaned = -0.00295607 Jy ! Component: 200 - total flux cleaned = -0.00350746 Jy ! Component: 250 - total flux cleaned = -0.00420649 Jy ! Component: 300 - total flux cleaned = -0.00459877 Jy ! Component: 350 - total flux cleaned = -0.00492382 Jy ! Component: 400 - total flux cleaned = -0.00502992 Jy ! Component: 450 - total flux cleaned = -0.00518302 Jy ! Component: 500 - total flux cleaned = -0.00533002 Jy ! Component: 550 - total flux cleaned = -0.0054249 Jy ! Component: 600 - total flux cleaned = -0.00556631 Jy ! Component: 650 - total flux cleaned = -0.00570556 Jy ! Component: 700 - total flux cleaned = -0.00588626 Jy ! Component: 750 - total flux cleaned = -0.00597399 Jy ! Component: 800 - total flux cleaned = -0.00623386 Jy ! Component: 850 - total flux cleaned = -0.00619105 Jy ! Component: 900 - total flux cleaned = -0.00644445 Jy ! Component: 950 - total flux cleaned = -0.00652777 Jy ! Component: 1000 - total flux cleaned = -0.00669173 Jy ! Component: 1050 - total flux cleaned = -0.00681288 Jy ! Component: 1100 - total flux cleaned = -0.00697156 Jy ! Component: 1150 - total flux cleaned = -0.00708928 Jy ! Component: 1200 - total flux cleaned = -0.0072439 Jy ! Component: 1250 - total flux cleaned = -0.00751038 Jy ! Component: 1300 - total flux cleaned = -0.00762246 Jy ! Component: 1350 - total flux cleaned = -0.00788172 Jy ! Component: 1400 - total flux cleaned = -0.00802791 Jy ! Component: 1450 - total flux cleaned = -0.00820813 Jy ! Component: 1500 - total flux cleaned = -0.00835092 Jy ! Component: 1550 - total flux cleaned = -0.00863296 Jy ! Component: 1600 - total flux cleaned = -0.00891185 Jy ! Component: 1650 - total flux cleaned = -0.00901518 Jy ! Component: 1700 - total flux cleaned = -0.00925326 Jy ! Component: 1750 - total flux cleaned = -0.00942097 Jy ! Component: 1800 - total flux cleaned = -0.00948731 Jy ! Component: 1850 - total flux cleaned = -0.00958585 Jy ! Component: 1900 - total flux cleaned = -0.00984583 Jy ! Component: 1950 - total flux cleaned = -0.00971639 Jy ! Component: 2000 - total flux cleaned = -0.00981249 Jy ! Component: 2050 - total flux cleaned = -0.00993896 Jy ! Component: 2100 - total flux cleaned = -0.0100012 Jy ! Component: 2150 - total flux cleaned = -0.0100016 Jy ! Component: 2200 - total flux cleaned = -0.0101548 Jy ! Component: 2250 - total flux cleaned = -0.0101847 Jy ! Component: 2300 - total flux cleaned = -0.0101245 Jy ! Component: 2350 - total flux cleaned = -0.0102441 Jy ! Component: 2400 - total flux cleaned = -0.0103035 Jy ! Component: 2450 - total flux cleaned = -0.0103621 Jy ! Component: 2500 - total flux cleaned = -0.0103909 Jy ! Component: 2550 - total flux cleaned = -0.0105345 Jy ! Component: 2600 - total flux cleaned = -0.0106484 Jy ! Component: 2650 - total flux cleaned = -0.0107329 Jy ! Component: 2700 - total flux cleaned = -0.0108445 Jy ! Component: 2750 - total flux cleaned = -0.0108442 Jy ! Component: 2800 - total flux cleaned = -0.0108993 Jy ! Component: 2850 - total flux cleaned = -0.0110632 Jy ! Component: 2900 - total flux cleaned = -0.0111713 Jy ! Component: 2950 - total flux cleaned = -0.0113054 Jy ! Component: 3000 - total flux cleaned = -0.011359 Jy ! Component: 3050 - total flux cleaned = -0.0115179 Jy ! Component: 3100 - total flux cleaned = -0.0116493 Jy ! Component: 3150 - total flux cleaned = -0.0117016 Jy ! Component: 3200 - total flux cleaned = -0.0118309 Jy ! Component: 3250 - total flux cleaned = -0.0119336 Jy ! Component: 3300 - total flux cleaned = -0.0120099 Jy ! Component: 3350 - total flux cleaned = -0.0120858 Jy ! Component: 3400 - total flux cleaned = -0.012186 Jy ! Component: 3450 - total flux cleaned = -0.0122855 Jy ! Component: 3500 - total flux cleaned = -0.0123843 Jy ! Component: 3550 - total flux cleaned = -0.0125314 Jy ! Component: 3600 - total flux cleaned = -0.0124827 Jy ! Component: 3650 - total flux cleaned = -0.0125309 Jy ! Component: 3700 - total flux cleaned = -0.0124828 Jy ! Component: 3750 - total flux cleaned = -0.0125782 Jy ! Component: 3800 - total flux cleaned = -0.0126255 Jy ! Component: 3850 - total flux cleaned = -0.0126489 Jy ! Component: 3900 - total flux cleaned = -0.0127188 Jy ! Component: 3950 - total flux cleaned = -0.012765 Jy ! Component: 4000 - total flux cleaned = -0.0127652 Jy ! Component: 4050 - total flux cleaned = -0.0129024 Jy ! Total flux subtracted in 4096 components = -0.0129476 Jy ! Clean residual min=-0.001481 max=0.001555 Jy/beam ! Clean residual mean=-0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.110442 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 349 components and 0.110442 Jy ![Exited script file: muppet] wmap "J1016+0513_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.294 x 7.841 at -3.094 degrees (North through East) ! Clean map min=-0.0037559 max=0.10786 Jy/beam ! Writing clean map to FITS file: J1016+0513_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107864 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00041467 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15331 1.15331 2.30662 4.61325 9.2265 18.453 36.906 73.812 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.294 x 7.841 at -3.094 degrees (North through East) ! Clean map min=-0.0037559 max=0.10786 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1016+0513_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:26:47 2019