! Started logfile: J1016+0513_S_2017_07_16_pus_uvs.log on Thu May 9 11:06:47 2019 obs J1016+0513_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1016+0513_S_2017_07_16_pus_uva.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.702924 visibilities/baseline/integration-bin. ! Found source: J1016+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 2404 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1016+0513_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.949382Jy sigma=0.007788 ! Fit after self-cal, rms=0.901413Jy sigma=0.007451 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=7.03 mas, bpa=-5.342 degrees ! Estimated noise=2517.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0775077 Jy ! Component: 100 - total flux cleaned = 0.0974324 Jy ! Total flux subtracted in 100 components = 0.0974324 Jy ! Clean residual min=-0.008365 max=0.009302 Jy/beam ! Clean residual mean=-0.000025 rms=0.002187 Jy/beam ! Combined flux in latest and established models = 0.0974324 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0974324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089467Jy sigma=0.000694 ! Fit after self-cal, rms=0.089411Jy sigma=0.000694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.533 mas, bpa=-4.29 degrees ! Estimated noise=2203.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122991 Jy ! Component: 100 - total flux cleaned = 0.0190699 Jy ! Component: 150 - total flux cleaned = 0.0231526 Jy ! Component: 200 - total flux cleaned = 0.0257523 Jy ! Total flux subtracted in 200 components = 0.0257523 Jy ! Clean residual min=-0.005988 max=0.007025 Jy/beam ! Clean residual mean=-0.000026 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.123185 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.123185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087773Jy sigma=0.000679 ! Fit after self-cal, rms=0.087699Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.03 KP 1.11 ! LA 0.93 MK 0.96 NL 0.85 OV 1.06 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.92 KP 1.01 ! LA 1.05 MK 0.90 NL 1.03 OV 0.97 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.23 KP 0.96 ! LA 0.91 MK 1.45 NL 1.04 OV 0.89 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.087699Jy sigma=0.000678 ! Fit after self-cal, rms=0.089433Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=7.561 mas, bpa=-3.577 degrees ! Estimated noise=2204.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000787326 Jy ! Component: 100 - total flux cleaned = -0.000856358 Jy ! Component: 150 - total flux cleaned = -0.000829251 Jy ! Component: 200 - total flux cleaned = -0.0007791 Jy ! Total flux subtracted in 200 components = -0.0007791 Jy ! Clean residual min=-0.005798 max=0.006627 Jy/beam ! Clean residual mean=-0.000024 rms=0.001457 Jy/beam ! Combined flux in latest and established models = 0.122406 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.122406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089404Jy sigma=0.000670 ! Fit after self-cal, rms=0.089535Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089535Jy sigma=0.000670 ! Fit after self-cal, rms=0.092571Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=7.617 mas, bpa=-3.321 degrees ! Estimated noise=2211.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000418769 Jy ! Component: 100 - total flux cleaned = -0.000343303 Jy ! Component: 150 - total flux cleaned = -0.0002779 Jy ! Component: 200 - total flux cleaned = -0.000248001 Jy ! Total flux subtracted in 200 components = -0.000248001 Jy ! Clean residual min=-0.004861 max=0.006206 Jy/beam ! Clean residual mean=-0.000010 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.122158 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.122158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092548Jy sigma=0.000662 ! Fit after self-cal, rms=0.092701Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31.5, 65). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562525 Jy ! Component: 100 - total flux cleaned = 0.00734541 Jy ! Component: 150 - total flux cleaned = 0.00806651 Jy ! Component: 200 - total flux cleaned = 0.0085656 Jy ! Total flux subtracted in 200 components = 0.0085656 Jy ! Clean residual min=-0.004476 max=0.004713 Jy/beam ! Clean residual mean=-0.000015 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.130723 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.130723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092242Jy sigma=0.000658 ! Fit after self-cal, rms=0.092196Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092196Jy sigma=0.000658 ! Fit after self-cal, rms=0.092408Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=7.637 mas, bpa=-3.405 degrees ! Estimated noise=2197.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018617 Jy ! Component: 100 - total flux cleaned = 0.00200411 Jy ! Component: 150 - total flux cleaned = 0.00206861 Jy ! Component: 200 - total flux cleaned = 0.00212453 Jy ! Total flux subtracted in 200 components = 0.00212453 Jy ! Clean residual min=-0.004421 max=0.004566 Jy/beam ! Clean residual mean=-0.000013 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.132848 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.132848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092292Jy sigma=0.000657 ! Fit after self-cal, rms=0.092294Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363187 Jy ! Component: 100 - total flux cleaned = 0.000362226 Jy ! Component: 150 - total flux cleaned = 0.000460514 Jy ! Component: 200 - total flux cleaned = 0.000459794 Jy ! Total flux subtracted in 200 components = 0.000459794 Jy ! Clean residual min=-0.004332 max=0.004484 Jy/beam ! Clean residual mean=-0.000013 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.133308 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 0.133307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092233Jy sigma=0.000656 ! Fit after self-cal, rms=0.092227Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092227Jy sigma=0.000656 ! Fit after self-cal, rms=0.092252Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.98 mas, bmaj=12.82 mas, bpa=-6.344 degrees ! Estimated noise=2885.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000758218 Jy ! Component: 100 - total flux cleaned = 0.0010844 Jy ! Component: 150 - total flux cleaned = 0.00130168 Jy ! Component: 200 - total flux cleaned = 0.00146518 Jy ! Total flux subtracted in 200 components = 0.00146518 Jy ! Clean residual min=-0.004744 max=0.004649 Jy/beam ! Clean residual mean=-0.000030 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.134773 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 0.134773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092222Jy sigma=0.000656 ! Fit after self-cal, rms=0.092221Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.53619e-05 Jy ! Component: 100 - total flux cleaned = 0.000246052 Jy ! Component: 150 - total flux cleaned = 0.000356846 Jy ! Component: 200 - total flux cleaned = 0.000408356 Jy ! Total flux subtracted in 200 components = 0.000408356 Jy ! Clean residual min=-0.004700 max=0.004627 Jy/beam ! Clean residual mean=-0.000030 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.135181 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.135181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092206Jy sigma=0.000656 ! Fit after self-cal, rms=0.092209Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.635 mas, bpa=-3.381 degrees ! Estimated noise=2195.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 7.635 at -3.381 degrees (North through East) ! Clean map min=-0.0042086 max=0.098954 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=7.08 mas, bpa=-4.585 degrees ! Estimated noise=2526.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0767127 Jy ! Component: 100 - total flux cleaned = 0.0965127 Jy ! Component: 150 - total flux cleaned = 0.106283 Jy ! Component: 200 - total flux cleaned = 0.110844 Jy ! Total flux subtracted in 200 components = 0.110844 Jy ! Clean residual min=-0.006290 max=0.006565 Jy/beam ! Clean residual mean=-0.000013 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.110844 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.110844 Jy ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.635 mas, bpa=-3.381 degrees ! Estimated noise=2195.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17, 41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678057 Jy ! Component: 100 - total flux cleaned = 0.0112973 Jy ! Component: 150 - total flux cleaned = 0.0142181 Jy ! Component: 200 - total flux cleaned = 0.0160813 Jy ! Total flux subtracted in 200 components = 0.0160813 Jy ! Clean residual min=-0.004861 max=0.004723 Jy/beam ! Clean residual mean=-0.000017 rms=0.001179 Jy/beam ! Combined flux in latest and established models = 0.126925 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 53 components and 0.126925 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.98 mas, bmaj=12.82 mas, bpa=-6.344 degrees ! Estimated noise=2885.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339399 Jy ! Component: 100 - total flux cleaned = 0.0055677 Jy ! Component: 150 - total flux cleaned = 0.00705 Jy ! Component: 200 - total flux cleaned = 0.00737132 Jy ! Total flux subtracted in 200 components = 0.00737132 Jy ! Clean residual min=-0.004928 max=0.004470 Jy/beam ! Clean residual mean=-0.000034 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.134297 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199096 Jy ! Component: 100 - total flux cleaned = 0.000339095 Jy ! Component: 150 - total flux cleaned = 0.000471598 Jy ! Component: 200 - total flux cleaned = 0.000595472 Jy ! Total flux subtracted in 200 components = 0.000595472 Jy ! Clean residual min=-0.004908 max=0.004364 Jy/beam ! Clean residual mean=-0.000033 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.134892 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 86 components and 0.134892 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.635 mas, bpa=-3.381 degrees ! Estimated noise=2195.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148603 Jy ! Component: 100 - total flux cleaned = -0.00155744 Jy ! Component: 150 - total flux cleaned = -0.00155715 Jy ! Component: 200 - total flux cleaned = -0.00137225 Jy ! Total flux subtracted in 200 components = -0.00137225 Jy ! Clean residual min=-0.004297 max=0.004254 Jy/beam ! Clean residual mean=-0.000013 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.13352 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.13352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092169Jy sigma=0.000656 ! Fit after self-cal, rms=0.092138Jy sigma=0.000656 wmodel J1016+0513_S_2017_07_16_pus_map.mod ! Writing 105 model components to file: J1016+0513_S_2017_07_16_pus_map.mod wobs J1016+0513_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1016+0513_S_2017_07_16_pus_uvs.fits wwins J1016+0513_S_2017_07_16_pus_map.win ! wwins: Wrote 3 windows to J1016+0513_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000713842 Jy ! Component: 100 - total flux cleaned = -0.00123175 Jy ! Component: 150 - total flux cleaned = -0.00171705 Jy ! Component: 200 - total flux cleaned = -0.00204945 Jy ! Component: 250 - total flux cleaned = -0.0023044 Jy ! Component: 300 - total flux cleaned = -0.00273086 Jy ! Component: 350 - total flux cleaned = -0.0030247 Jy ! Component: 400 - total flux cleaned = -0.00331032 Jy ! Component: 450 - total flux cleaned = -0.00331106 Jy ! Component: 500 - total flux cleaned = -0.00320332 Jy ! Component: 550 - total flux cleaned = -0.00304737 Jy ! Component: 600 - total flux cleaned = -0.00325206 Jy ! Component: 650 - total flux cleaned = -0.00325219 Jy ! Component: 700 - total flux cleaned = -0.00349693 Jy ! Component: 750 - total flux cleaned = -0.00364035 Jy ! Component: 800 - total flux cleaned = -0.0038277 Jy ! Component: 850 - total flux cleaned = -0.00405745 Jy ! Component: 900 - total flux cleaned = -0.00414724 Jy ! Component: 950 - total flux cleaned = -0.00432455 Jy ! Component: 1000 - total flux cleaned = -0.00441175 Jy ! Component: 1050 - total flux cleaned = -0.00458251 Jy ! Component: 1100 - total flux cleaned = -0.0047085 Jy ! Component: 1150 - total flux cleaned = -0.00474987 Jy ! Component: 1200 - total flux cleaned = -0.00495258 Jy ! Component: 1250 - total flux cleaned = -0.0050709 Jy ! Component: 1300 - total flux cleaned = -0.00503201 Jy ! Component: 1350 - total flux cleaned = -0.00510907 Jy ! Component: 1400 - total flux cleaned = -0.00510974 Jy ! Component: 1450 - total flux cleaned = -0.00522295 Jy ! Component: 1500 - total flux cleaned = -0.00529732 Jy ! Component: 1550 - total flux cleaned = -0.00529671 Jy ! Component: 1600 - total flux cleaned = -0.0053328 Jy ! Component: 1650 - total flux cleaned = -0.00540408 Jy ! Component: 1700 - total flux cleaned = -0.00536898 Jy ! Component: 1750 - total flux cleaned = -0.00536958 Jy ! Component: 1800 - total flux cleaned = -0.00550662 Jy ! Component: 1850 - total flux cleaned = -0.0053708 Jy ! Component: 1900 - total flux cleaned = -0.00543816 Jy ! Component: 1950 - total flux cleaned = -0.00537209 Jy ! Component: 2000 - total flux cleaned = -0.00533949 Jy ! Component: 2050 - total flux cleaned = -0.00537227 Jy ! Component: 2100 - total flux cleaned = -0.00530847 Jy ! Component: 2150 - total flux cleaned = -0.00527707 Jy ! Component: 2200 - total flux cleaned = -0.0053398 Jy ! Component: 2250 - total flux cleaned = -0.00527768 Jy ! Component: 2300 - total flux cleaned = -0.00540166 Jy ! Component: 2350 - total flux cleaned = -0.00534032 Jy ! Component: 2400 - total flux cleaned = -0.00546145 Jy ! Component: 2450 - total flux cleaned = -0.00531112 Jy ! Component: 2500 - total flux cleaned = -0.00534142 Jy ! Component: 2550 - total flux cleaned = -0.00534155 Jy ! Component: 2600 - total flux cleaned = -0.00528337 Jy ! Component: 2650 - total flux cleaned = -0.00531226 Jy ! Component: 2700 - total flux cleaned = -0.00522604 Jy ! Component: 2750 - total flux cleaned = -0.00522603 Jy ! Component: 2800 - total flux cleaned = -0.00516996 Jy ! Component: 2850 - total flux cleaned = -0.00511421 Jy ! Component: 2900 - total flux cleaned = -0.00516957 Jy ! Component: 2950 - total flux cleaned = -0.00511466 Jy ! Component: 3000 - total flux cleaned = -0.00522356 Jy ! Component: 3050 - total flux cleaned = -0.00514254 Jy ! Component: 3100 - total flux cleaned = -0.00516986 Jy ! Component: 3150 - total flux cleaned = -0.00509047 Jy ! Component: 3200 - total flux cleaned = -0.00514326 Jy ! Component: 3250 - total flux cleaned = -0.00509123 Jy ! Component: 3300 - total flux cleaned = -0.00511688 Jy ! Component: 3350 - total flux cleaned = -0.00506597 Jy ! Component: 3400 - total flux cleaned = -0.00511693 Jy ! Component: 3450 - total flux cleaned = -0.00514195 Jy ! Component: 3500 - total flux cleaned = -0.00506644 Jy ! Component: 3550 - total flux cleaned = -0.00496715 Jy ! Component: 3600 - total flux cleaned = -0.00501677 Jy ! Component: 3650 - total flux cleaned = -0.0049678 Jy ! Component: 3700 - total flux cleaned = -0.00499189 Jy ! Component: 3750 - total flux cleaned = -0.00501633 Jy ! Component: 3800 - total flux cleaned = -0.00501638 Jy ! Component: 3850 - total flux cleaned = -0.00513569 Jy ! Component: 3900 - total flux cleaned = -0.00515915 Jy ! Component: 3950 - total flux cleaned = -0.00518266 Jy ! Component: 4000 - total flux cleaned = -0.00527644 Jy ! Component: 4050 - total flux cleaned = -0.00529972 Jy ! Total flux subtracted in 4096 components = -0.00539241 Jy ! Clean residual min=-0.001562 max=0.001396 Jy/beam ! Clean residual mean=-0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.128127 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 387 components and 0.128127 Jy ![Exited script file: muppet] wmap "J1016+0513_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 7.635 at -3.381 degrees (North through East) ! Clean map min=-0.0031189 max=0.098767 Jy/beam ! Writing clean map to FITS file: J1016+0513_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0987672 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000413529 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.25607 1.25607 2.51214 5.02428 10.0486 20.0971 40.1943 80.3885 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 7.635 at -3.381 degrees (North through East) ! Clean map min=-0.0031189 max=0.098767 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1016+0513_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:06:51 2019