! Started logfile: J1016+0513_S_2017_07_09_pus_uvs.log on Wed May 8 14:47:14 2019 obs J1016+0513_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1016+0513_S_2017_07_09_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.695019 visibilities/baseline/integration-bin. ! Found source: J1016+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 3628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1016+0513_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925376Jy sigma=0.008646 ! Fit after self-cal, rms=0.898708Jy sigma=0.008425 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.662 mas, bmaj=7.392 mas, bpa=-4.952 degrees ! Estimated noise=1692.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.082529 Jy ! Component: 100 - total flux cleaned = 0.103019 Jy ! Total flux subtracted in 100 components = 0.103019 Jy ! Clean residual min=-0.012290 max=0.009960 Jy/beam ! Clean residual mean=0.000004 rms=0.003065 Jy/beam ! Combined flux in latest and established models = 0.103019 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.103019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100671Jy sigma=0.000922 ! Fit after self-cal, rms=0.100222Jy sigma=0.000918 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.469 mas, bpa=-4.004 degrees ! Estimated noise=1397.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951645 Jy ! Component: 100 - total flux cleaned = 0.0143418 Jy ! Component: 150 - total flux cleaned = 0.0170319 Jy ! Component: 200 - total flux cleaned = 0.0184941 Jy ! Total flux subtracted in 200 components = 0.0184941 Jy ! Clean residual min=-0.008252 max=0.006447 Jy/beam ! Clean residual mean=-0.000005 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 0.121513 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 35 components and 0.121513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099392Jy sigma=0.000909 ! Fit after self-cal, rms=0.099394Jy sigma=0.000909 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.57 KP 1.06 ! LA 1.07 MK 1.11 NL 1.02 OV 0.97 ! PT 1.05 SC 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.01 KP 1.04 ! LA 0.95 MK 1.27 NL 0.99 OV 1.08 ! PT 0.93 SC 1.31 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.95 KP 0.98 ! LA 0.94 MK 1.23 NL 0.97 OV 0.99 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.87 KP 1.00* ! LA 0.89 MK 1.27 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.099394Jy sigma=0.000909 ! Fit after self-cal, rms=0.087567Jy sigma=0.000886 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=8.462 mas, bpa=-3.494 degrees ! Estimated noise=1392.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000583482 Jy ! Component: 100 - total flux cleaned = -0.000578842 Jy ! Component: 150 - total flux cleaned = -0.000525404 Jy ! Component: 200 - total flux cleaned = -0.000472631 Jy ! Total flux subtracted in 200 components = -0.000472631 Jy ! Clean residual min=-0.007184 max=0.006107 Jy/beam ! Clean residual mean=-0.000005 rms=0.001739 Jy/beam ! Combined flux in latest and established models = 0.121041 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.121041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087467Jy sigma=0.000885 ! Fit after self-cal, rms=0.088872Jy sigma=0.000878 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088872Jy sigma=0.000878 ! Fit after self-cal, rms=0.106764Jy sigma=0.000859 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=8.572 mas, bpa=-4.125 degrees ! Estimated noise=1508.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675359 Jy ! Component: 100 - total flux cleaned = 0.00654981 Jy ! Component: 150 - total flux cleaned = 0.0062151 Jy ! Component: 200 - total flux cleaned = 0.00600486 Jy ! Total flux subtracted in 200 components = 0.00600486 Jy ! Clean residual min=-0.007591 max=0.006408 Jy/beam ! Clean residual mean=-0.000000 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 0.127045 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.127045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106391Jy sigma=0.000852 ! Fit after self-cal, rms=0.108085Jy sigma=0.000849 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145003 Jy ! Component: 100 - total flux cleaned = -0.00169525 Jy ! Component: 150 - total flux cleaned = -0.00185125 Jy ! Component: 200 - total flux cleaned = -0.00198495 Jy ! Total flux subtracted in 200 components = -0.00198495 Jy ! Clean residual min=-0.007908 max=0.006187 Jy/beam ! Clean residual mean=-0.000004 rms=0.001881 Jy/beam ! Combined flux in latest and established models = 0.12506 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.12506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108059Jy sigma=0.000848 ! Fit after self-cal, rms=0.108117Jy sigma=0.000847 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108117Jy sigma=0.000847 ! Fit after self-cal, rms=0.143101Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=8.55 mas, bpa=-4.353 degrees ! Estimated noise=1509.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172595 Jy ! Component: 100 - total flux cleaned = 0.00196209 Jy ! Component: 150 - total flux cleaned = 0.00215267 Jy ! Component: 200 - total flux cleaned = 0.00227856 Jy ! Total flux subtracted in 200 components = 0.00227856 Jy ! Clean residual min=-0.004762 max=0.004043 Jy/beam ! Clean residual mean=-0.000000 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.127339 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 62 components and 0.127339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143025Jy sigma=0.000757 ! Fit after self-cal, rms=0.145184Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000619776 Jy ! Component: 100 - total flux cleaned = -0.000736061 Jy ! Component: 150 - total flux cleaned = -0.000829868 Jy ! Component: 200 - total flux cleaned = -0.000924098 Jy ! Total flux subtracted in 200 components = -0.000924098 Jy ! Clean residual min=-0.004561 max=0.004266 Jy/beam ! Clean residual mean=-0.000005 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.126415 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.126415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145167Jy sigma=0.000750 ! Fit after self-cal, rms=0.145184Jy sigma=0.000750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145184Jy sigma=0.000750 ! Fit after self-cal, rms=0.169510Jy sigma=0.000749 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.259 mas, bmaj=14.07 mas, bpa=-9.644 degrees ! Estimated noise=1918.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159729 Jy ! Component: 100 - total flux cleaned = 0.00172805 Jy ! Component: 150 - total flux cleaned = 0.00172707 Jy ! Component: 200 - total flux cleaned = 0.00172844 Jy ! Total flux subtracted in 200 components = 0.00172844 Jy ! Clean residual min=-0.005676 max=0.004918 Jy/beam ! Clean residual mean=-0.000006 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.128143 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 78 components and 0.128143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169486Jy sigma=0.000749 ! Fit after self-cal, rms=0.169687Jy sigma=0.000749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142864 Jy ! Component: 100 - total flux cleaned = -0.000192457 Jy ! Component: 150 - total flux cleaned = -0.000193198 Jy ! Component: 200 - total flux cleaned = -0.000174405 Jy ! Total flux subtracted in 200 components = -0.000174405 Jy ! Clean residual min=-0.005643 max=0.004888 Jy/beam ! Clean residual mean=-0.000007 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.127969 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 79 components and 0.127969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169681Jy sigma=0.000749 ! Fit after self-cal, rms=0.169692Jy sigma=0.000749 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.564 mas, bpa=-4.651 degrees ! Estimated noise=1518.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.564 at -4.651 degrees (North through East) ! Clean map min=-0.0043965 max=0.11223 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=7.539 mas, bpa=-6.015 degrees ! Estimated noise=1772.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0863246 Jy ! Component: 100 - total flux cleaned = 0.107894 Jy ! Component: 150 - total flux cleaned = 0.115619 Jy ! Component: 200 - total flux cleaned = 0.119468 Jy ! Total flux subtracted in 200 components = 0.119468 Jy ! Clean residual min=-0.004934 max=0.004604 Jy/beam ! Clean residual mean=-0.000001 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.119468 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.119468 Jy ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.564 mas, bpa=-4.651 degrees ! Estimated noise=1518.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039591 Jy ! Component: 100 - total flux cleaned = 0.00598032 Jy ! Component: 150 - total flux cleaned = 0.00661991 Jy ! Component: 200 - total flux cleaned = 0.00687565 Jy ! Total flux subtracted in 200 components = 0.00687565 Jy ! Clean residual min=-0.004446 max=0.004111 Jy/beam ! Clean residual mean=-0.000003 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.126344 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 0.126344 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.259 mas, bmaj=14.07 mas, bpa=-9.644 degrees ! Estimated noise=1918.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137967 Jy ! Component: 100 - total flux cleaned = 0.00141164 Jy ! Component: 150 - total flux cleaned = 0.00141102 Jy ! Component: 200 - total flux cleaned = 0.00143214 Jy ! Total flux subtracted in 200 components = 0.00143214 Jy ! Clean residual min=-0.005641 max=0.004811 Jy/beam ! Clean residual mean=-0.000007 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.127776 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.78522e-07 Jy ! Component: 100 - total flux cleaned = -1.42003e-06 Jy ! Component: 150 - total flux cleaned = -1.4889e-07 Jy ! Component: 200 - total flux cleaned = 3.36245e-08 Jy ! Total flux subtracted in 200 components = 3.36245e-08 Jy ! Clean residual min=-0.005666 max=0.004776 Jy/beam ! Clean residual mean=-0.000007 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.127776 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.127776 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.564 mas, bpa=-4.651 degrees ! Estimated noise=1518.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000399059 Jy ! Component: 100 - total flux cleaned = -0.000526171 Jy ! Component: 150 - total flux cleaned = -0.000548383 Jy ! Component: 200 - total flux cleaned = -0.000549639 Jy ! Total flux subtracted in 200 components = -0.000549639 Jy ! Clean residual min=-0.004469 max=0.004165 Jy/beam ! Clean residual mean=-0.000004 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.127226 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.127227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169661Jy sigma=0.000749 ! Fit after self-cal, rms=0.169683Jy sigma=0.000749 wmodel J1016+0513_S_2017_07_09_pus_map.mod ! Writing 68 model components to file: J1016+0513_S_2017_07_09_pus_map.mod wobs J1016+0513_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1016+0513_S_2017_07_09_pus_uvs.fits wwins J1016+0513_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J1016+0513_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000889816 Jy ! Component: 100 - total flux cleaned = -0.00162548 Jy ! Component: 150 - total flux cleaned = -0.00245689 Jy ! Component: 200 - total flux cleaned = -0.00325506 Jy ! Component: 250 - total flux cleaned = -0.00357549 Jy ! Component: 300 - total flux cleaned = -0.00401247 Jy ! Component: 350 - total flux cleaned = -0.00449872 Jy ! Component: 400 - total flux cleaned = -0.00473662 Jy ! Component: 450 - total flux cleaned = -0.00519849 Jy ! Component: 500 - total flux cleaned = -0.00559444 Jy ! Component: 550 - total flux cleaned = -0.00609184 Jy ! Component: 600 - total flux cleaned = -0.00641697 Jy ! Component: 650 - total flux cleaned = -0.00662996 Jy ! Component: 700 - total flux cleaned = -0.00699525 Jy ! Component: 750 - total flux cleaned = -0.0071997 Jy ! Component: 800 - total flux cleaned = -0.00745247 Jy ! Component: 850 - total flux cleaned = -0.00755173 Jy ! Component: 900 - total flux cleaned = -0.00784397 Jy ! Component: 950 - total flux cleaned = -0.00793921 Jy ! Component: 1000 - total flux cleaned = -0.0079394 Jy ! Component: 1050 - total flux cleaned = -0.00821869 Jy ! Component: 1100 - total flux cleaned = -0.00817223 Jy ! Component: 1150 - total flux cleaned = -0.00826292 Jy ! Component: 1200 - total flux cleaned = -0.00835197 Jy ! Component: 1250 - total flux cleaned = -0.00843965 Jy ! Component: 1300 - total flux cleaned = -0.00848319 Jy ! Component: 1350 - total flux cleaned = -0.00848291 Jy ! Component: 1400 - total flux cleaned = -0.00852508 Jy ! Component: 1450 - total flux cleaned = -0.00848371 Jy ! Component: 1500 - total flux cleaned = -0.00856719 Jy ! Component: 1550 - total flux cleaned = -0.00848425 Jy ! Component: 1600 - total flux cleaned = -0.00832064 Jy ! Component: 1650 - total flux cleaned = -0.00848208 Jy ! Component: 1700 - total flux cleaned = -0.00844142 Jy ! Component: 1750 - total flux cleaned = -0.00836183 Jy ! Component: 1800 - total flux cleaned = -0.00808735 Jy ! Component: 1850 - total flux cleaned = -0.00812669 Jy ! Component: 1900 - total flux cleaned = -0.00804903 Jy ! Component: 1950 - total flux cleaned = -0.00778257 Jy ! Component: 2000 - total flux cleaned = -0.00774477 Jy ! Component: 2050 - total flux cleaned = -0.00774476 Jy ! Component: 2100 - total flux cleaned = -0.00767099 Jy ! Component: 2150 - total flux cleaned = -0.00763439 Jy ! Component: 2200 - total flux cleaned = -0.00756175 Jy ! Component: 2250 - total flux cleaned = -0.00745399 Jy ! Component: 2300 - total flux cleaned = -0.0073823 Jy ! Component: 2350 - total flux cleaned = -0.00731134 Jy ! Component: 2400 - total flux cleaned = -0.00724134 Jy ! Component: 2450 - total flux cleaned = -0.00727641 Jy ! Component: 2500 - total flux cleaned = -0.00710383 Jy ! Component: 2550 - total flux cleaned = -0.00703558 Jy ! Component: 2600 - total flux cleaned = -0.00700192 Jy ! Component: 2650 - total flux cleaned = -0.00703541 Jy ! Component: 2700 - total flux cleaned = -0.00696832 Jy ! Component: 2750 - total flux cleaned = -0.0069015 Jy ! Component: 2800 - total flux cleaned = -0.00683561 Jy ! Component: 2850 - total flux cleaned = -0.00676996 Jy ! Component: 2900 - total flux cleaned = -0.00670492 Jy ! Component: 2950 - total flux cleaned = -0.00680197 Jy ! Component: 3000 - total flux cleaned = -0.00686626 Jy ! Component: 3050 - total flux cleaned = -0.00683432 Jy ! Component: 3100 - total flux cleaned = -0.00680265 Jy ! Component: 3150 - total flux cleaned = -0.00680244 Jy ! Component: 3200 - total flux cleaned = -0.0067399 Jy ! Component: 3250 - total flux cleaned = -0.00686432 Jy ! Component: 3300 - total flux cleaned = -0.00689511 Jy ! Component: 3350 - total flux cleaned = -0.00686452 Jy ! Component: 3400 - total flux cleaned = -0.00701718 Jy ! Component: 3450 - total flux cleaned = -0.00695648 Jy ! Component: 3500 - total flux cleaned = -0.00719801 Jy ! Component: 3550 - total flux cleaned = -0.00716792 Jy ! Component: 3600 - total flux cleaned = -0.00719776 Jy ! Component: 3650 - total flux cleaned = -0.00725719 Jy ! Component: 3700 - total flux cleaned = -0.00728688 Jy ! Component: 3750 - total flux cleaned = -0.00731639 Jy ! Component: 3800 - total flux cleaned = -0.00752046 Jy ! Component: 3850 - total flux cleaned = -0.00749142 Jy ! Component: 3900 - total flux cleaned = -0.00752008 Jy ! Component: 3950 - total flux cleaned = -0.00749157 Jy ! Component: 4000 - total flux cleaned = -0.00754875 Jy ! Component: 4050 - total flux cleaned = -0.0075772 Jy ! Total flux subtracted in 4096 components = -0.0076055 Jy ! Clean residual min=-0.001574 max=0.001977 Jy/beam ! Clean residual mean=-0.000006 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.119621 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 343 components and 0.119621 Jy ![Exited script file: muppet] wmap "J1016+0513_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.564 at -4.651 degrees (North through East) ! Clean map min=-0.0032721 max=0.11098 Jy/beam ! Writing clean map to FITS file: J1016+0513_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11098 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000535777 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.4483 1.4483 2.8966 5.7932 11.5864 23.1728 46.3456 92.6913 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.564 at -4.651 degrees (North through East) ! Clean map min=-0.0032721 max=0.11098 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1016+0513_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:47:18 2019