! Started logfile: J1013-2546_S_2017_07_16_pus_uvs.log on Thu May 9 11:06:42 2019 obs J1013-2546_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1013-2546_S_2017_07_16_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.522619 visibilities/baseline/integration-bin. ! Found source: J1013-2546 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 5268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1013-2546_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 485 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884128Jy sigma=0.005995 ! Fit after self-cal, rms=0.864370Jy sigma=0.005857 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.519 mas, bmaj=7.686 mas, bpa=-2.208 degrees ! Estimated noise=2202.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105617 Jy ! Component: 100 - total flux cleaned = 0.132291 Jy ! Total flux subtracted in 100 components = 0.132291 Jy ! Clean residual min=-0.007923 max=0.013523 Jy/beam ! Clean residual mean=-0.000013 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.132291 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.132291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104895Jy sigma=0.000678 ! Fit after self-cal, rms=0.104871Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=8.739 mas, bpa=-3.157 degrees ! Estimated noise=1659.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187699 Jy ! Component: 100 - total flux cleaned = 0.0287022 Jy ! Component: 150 - total flux cleaned = 0.0344356 Jy ! Component: 200 - total flux cleaned = 0.0379244 Jy ! Total flux subtracted in 200 components = 0.0379244 Jy ! Clean residual min=-0.005254 max=0.005652 Jy/beam ! Clean residual mean=0.000008 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.170216 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 62 components and 0.170216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101887Jy sigma=0.000653 ! Fit after self-cal, rms=0.101865Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.13 KP 1.00 ! LA 0.98 MK 1.07 NL 0.89 OV 1.03 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.16 KP 0.96 ! LA 0.96 MK 1.04 NL 1.07 OV 1.00 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.13 KP 0.97 ! LA 0.93 MK 1.02 NL 1.02 OV 0.96 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.101865Jy sigma=0.000653 ! Fit after self-cal, rms=0.104116Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=8.875 mas, bpa=-1.978 degrees ! Estimated noise=1673.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000857704 Jy ! Component: 100 - total flux cleaned = -0.00108235 Jy ! Component: 150 - total flux cleaned = -0.00116483 Jy ! Component: 200 - total flux cleaned = -0.00122839 Jy ! Total flux subtracted in 200 components = -0.00122839 Jy ! Clean residual min=-0.004030 max=0.004353 Jy/beam ! Clean residual mean=0.000012 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.168987 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.168987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104092Jy sigma=0.000649 ! Fit after self-cal, rms=0.104216Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104216Jy sigma=0.000649 ! Fit after self-cal, rms=0.105237Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=8.895 mas, bpa=-1.89 degrees ! Estimated noise=1672.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011426 Jy ! Component: 100 - total flux cleaned = -0.000230023 Jy ! Component: 150 - total flux cleaned = -0.000326568 Jy ! Component: 200 - total flux cleaned = -0.000392291 Jy ! Total flux subtracted in 200 components = -0.000392291 Jy ! Clean residual min=-0.004054 max=0.003706 Jy/beam ! Clean residual mean=0.000008 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.168595 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 70 components and 0.168595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105222Jy sigma=0.000648 ! Fit after self-cal, rms=0.105253Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.28719e-05 Jy ! Component: 100 - total flux cleaned = -6.01218e-05 Jy ! Component: 150 - total flux cleaned = -6.05356e-05 Jy ! Component: 200 - total flux cleaned = -7.41631e-05 Jy ! Total flux subtracted in 200 components = -7.41631e-05 Jy ! Clean residual min=-0.004044 max=0.003752 Jy/beam ! Clean residual mean=0.000008 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.168521 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.168521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105245Jy sigma=0.000648 ! Fit after self-cal, rms=0.105243Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105243Jy sigma=0.000648 ! Fit after self-cal, rms=0.105759Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=8.917 mas, bpa=-1.838 degrees ! Estimated noise=1671.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166646 Jy ! Component: 100 - total flux cleaned = -0.000229245 Jy ! Component: 150 - total flux cleaned = -0.000247984 Jy ! Component: 200 - total flux cleaned = -0.00024822 Jy ! Total flux subtracted in 200 components = -0.00024822 Jy ! Clean residual min=-0.004075 max=0.003421 Jy/beam ! Clean residual mean=0.000005 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.168273 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.168272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105746Jy sigma=0.000648 ! Fit after self-cal, rms=0.105760Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.43877e-05 Jy ! Component: 100 - total flux cleaned = -4.80534e-05 Jy ! Component: 150 - total flux cleaned = -4.83397e-05 Jy ! Component: 200 - total flux cleaned = -4.86629e-05 Jy ! Total flux subtracted in 200 components = -4.86629e-05 Jy ! Clean residual min=-0.004056 max=0.003458 Jy/beam ! Clean residual mean=0.000005 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.168224 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 78 components and 0.168224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105752Jy sigma=0.000648 ! Fit after self-cal, rms=0.105751Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105751Jy sigma=0.000648 ! Fit after self-cal, rms=0.105711Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.071 mas, bmaj=18.41 mas, bpa=-4.139 degrees ! Estimated noise=2119.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340442 Jy ! Component: 100 - total flux cleaned = -0.000359638 Jy ! Component: 150 - total flux cleaned = -0.000408922 Jy ! Component: 200 - total flux cleaned = -0.0004522 Jy ! Total flux subtracted in 200 components = -0.0004522 Jy ! Clean residual min=-0.003171 max=0.003550 Jy/beam ! Clean residual mean=0.000009 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.167772 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 80 components and 0.167772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105705Jy sigma=0.000648 ! Fit after self-cal, rms=0.105704Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.29108e-05 Jy ! Component: 100 - total flux cleaned = -9.24193e-05 Jy ! Component: 150 - total flux cleaned = -9.19332e-05 Jy ! Component: 200 - total flux cleaned = -9.15138e-05 Jy ! Total flux subtracted in 200 components = -9.15138e-05 Jy ! Clean residual min=-0.003177 max=0.003544 Jy/beam ! Clean residual mean=0.000009 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.16768 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 82 components and 0.16768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105700Jy sigma=0.000648 ! Fit after self-cal, rms=0.105697Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=8.927 mas, bpa=-1.783 degrees ! Estimated noise=1669.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.023 x 8.927 at -1.783 degrees (North through East) ! Clean map min=-0.003856 max=0.13748 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=7.791 mas, bpa=-0.9905 degrees ! Estimated noise=2226.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10594 Jy ! Component: 100 - total flux cleaned = 0.133077 Jy ! Component: 150 - total flux cleaned = 0.146209 Jy ! Component: 200 - total flux cleaned = 0.153933 Jy ! Total flux subtracted in 200 components = 0.153933 Jy ! Clean residual min=-0.005803 max=0.005842 Jy/beam ! Clean residual mean=-0.000004 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 0.153933 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.153933 Jy ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=8.927 mas, bpa=-1.783 degrees ! Estimated noise=1669.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641138 Jy ! Component: 100 - total flux cleaned = 0.00959091 Jy ! Component: 150 - total flux cleaned = 0.0113311 Jy ! Component: 200 - total flux cleaned = 0.0123327 Jy ! Total flux subtracted in 200 components = 0.0123327 Jy ! Clean residual min=-0.004112 max=0.003863 Jy/beam ! Clean residual mean=0.000003 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.166266 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 85 components and 0.166266 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.071 mas, bmaj=18.41 mas, bpa=-4.139 degrees ! Estimated noise=2119.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000995288 Jy ! Component: 100 - total flux cleaned = 0.0010843 Jy ! Component: 150 - total flux cleaned = 0.001112 Jy ! Component: 200 - total flux cleaned = 0.00112468 Jy ! Total flux subtracted in 200 components = 0.00112468 Jy ! Clean residual min=-0.003288 max=0.003475 Jy/beam ! Clean residual mean=0.000008 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.167391 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.20125e-05 Jy ! Component: 100 - total flux cleaned = 3.1728e-05 Jy ! Component: 150 - total flux cleaned = 4.09805e-05 Jy ! Component: 200 - total flux cleaned = 5.70945e-05 Jy ! Total flux subtracted in 200 components = 5.70945e-05 Jy ! Clean residual min=-0.003277 max=0.003488 Jy/beam ! Clean residual mean=0.000008 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.167448 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 94 components and 0.167448 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=8.927 mas, bpa=-1.783 degrees ! Estimated noise=1669.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000259263 Jy ! Component: 100 - total flux cleaned = -0.000159966 Jy ! Component: 150 - total flux cleaned = -0.000110015 Jy ! Component: 200 - total flux cleaned = -8.91241e-05 Jy ! Total flux subtracted in 200 components = -8.91241e-05 Jy ! Clean residual min=-0.003997 max=0.003612 Jy/beam ! Clean residual mean=0.000004 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.167359 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 101 components and 0.167359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105677Jy sigma=0.000648 ! Fit after self-cal, rms=0.105658Jy sigma=0.000647 wmodel J1013-2546_S_2017_07_16_pus_map.mod ! Writing 101 model components to file: J1013-2546_S_2017_07_16_pus_map.mod wobs J1013-2546_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1013-2546_S_2017_07_16_pus_uvs.fits wwins J1013-2546_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1013-2546_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456857 Jy ! Component: 100 - total flux cleaned = -0.00033429 Jy ! Component: 150 - total flux cleaned = -0.000167868 Jy ! Component: 200 - total flux cleaned = 9.88263e-05 Jy ! Component: 250 - total flux cleaned = 0.000500768 Jy ! Component: 300 - total flux cleaned = 0.000884102 Jy ! Component: 350 - total flux cleaned = 0.00139336 Jy ! Component: 400 - total flux cleaned = 0.00183832 Jy ! Component: 450 - total flux cleaned = 0.00231143 Jy ! Component: 500 - total flux cleaned = 0.00280844 Jy ! Component: 550 - total flux cleaned = 0.00308882 Jy ! Component: 600 - total flux cleaned = 0.0033227 Jy ! Component: 650 - total flux cleaned = 0.00339826 Jy ! Component: 700 - total flux cleaned = 0.00343507 Jy ! Component: 750 - total flux cleaned = 0.00350649 Jy ! Component: 800 - total flux cleaned = 0.00347185 Jy ! Component: 850 - total flux cleaned = 0.00343763 Jy ! Component: 900 - total flux cleaned = 0.00340525 Jy ! Component: 950 - total flux cleaned = 0.00337285 Jy ! Component: 1000 - total flux cleaned = 0.00337322 Jy ! Component: 1050 - total flux cleaned = 0.00340436 Jy ! Component: 1100 - total flux cleaned = 0.00340494 Jy ! Component: 1150 - total flux cleaned = 0.00340499 Jy ! Component: 1200 - total flux cleaned = 0.0033458 Jy ! Component: 1250 - total flux cleaned = 0.0034044 Jy ! Component: 1300 - total flux cleaned = 0.00346191 Jy ! Component: 1350 - total flux cleaned = 0.00357444 Jy ! Component: 1400 - total flux cleaned = 0.00354663 Jy ! Component: 1450 - total flux cleaned = 0.00365616 Jy ! Component: 1500 - total flux cleaned = 0.00379076 Jy ! Component: 1550 - total flux cleaned = 0.00384388 Jy ! Component: 1600 - total flux cleaned = 0.0038699 Jy ! Component: 1650 - total flux cleaned = 0.00394756 Jy ! Component: 1700 - total flux cleaned = 0.00394753 Jy ! Component: 1750 - total flux cleaned = 0.00409906 Jy ! Component: 1800 - total flux cleaned = 0.00409911 Jy ! Component: 1850 - total flux cleaned = 0.00419793 Jy ! Component: 1900 - total flux cleaned = 0.00429518 Jy ! Component: 1950 - total flux cleaned = 0.00434369 Jy ! Component: 2000 - total flux cleaned = 0.00441531 Jy ! Component: 2050 - total flux cleaned = 0.00448589 Jy ! Component: 2100 - total flux cleaned = 0.00455585 Jy ! Component: 2150 - total flux cleaned = 0.00460183 Jy ! Component: 2200 - total flux cleaned = 0.00469311 Jy ! Component: 2250 - total flux cleaned = 0.00471573 Jy ! Component: 2300 - total flux cleaned = 0.00476046 Jy ! Component: 2350 - total flux cleaned = 0.00487097 Jy ! Component: 2400 - total flux cleaned = 0.00487106 Jy ! Component: 2450 - total flux cleaned = 0.00495803 Jy ! Component: 2500 - total flux cleaned = 0.00502265 Jy ! Component: 2550 - total flux cleaned = 0.00504386 Jy ! Component: 2600 - total flux cleaned = 0.00512835 Jy ! Component: 2650 - total flux cleaned = 0.00508674 Jy ! Component: 2700 - total flux cleaned = 0.00521138 Jy ! Component: 2750 - total flux cleaned = 0.00527303 Jy ! Component: 2800 - total flux cleaned = 0.00531337 Jy ! Component: 2850 - total flux cleaned = 0.00525282 Jy ! Component: 2900 - total flux cleaned = 0.00527289 Jy ! Component: 2950 - total flux cleaned = 0.0052728 Jy ! Component: 3000 - total flux cleaned = 0.00525303 Jy ! Component: 3050 - total flux cleaned = 0.00527268 Jy ! Component: 3100 - total flux cleaned = 0.00523381 Jy ! Component: 3150 - total flux cleaned = 0.00529161 Jy ! Component: 3200 - total flux cleaned = 0.00529152 Jy ! Component: 3250 - total flux cleaned = 0.00527259 Jy ! Component: 3300 - total flux cleaned = 0.0052539 Jy ! Component: 3350 - total flux cleaned = 0.00527276 Jy ! Component: 3400 - total flux cleaned = 0.00531002 Jy ! Component: 3450 - total flux cleaned = 0.00532853 Jy ! Component: 3500 - total flux cleaned = 0.00531009 Jy ! Component: 3550 - total flux cleaned = 0.00527368 Jy ! Component: 3600 - total flux cleaned = 0.00529191 Jy ! Component: 3650 - total flux cleaned = 0.00532787 Jy ! Component: 3700 - total flux cleaned = 0.0052739 Jy ! Component: 3750 - total flux cleaned = 0.00530958 Jy ! Component: 3800 - total flux cleaned = 0.00534501 Jy ! Component: 3850 - total flux cleaned = 0.00536264 Jy ! Component: 3900 - total flux cleaned = 0.00538023 Jy ! Component: 3950 - total flux cleaned = 0.00539773 Jy ! Component: 4000 - total flux cleaned = 0.00545005 Jy ! Component: 4050 - total flux cleaned = 0.00541532 Jy ! Total flux subtracted in 4096 components = 0.00536386 Jy ! Clean residual min=-0.001171 max=0.001030 Jy/beam ! Clean residual mean=0.000004 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.172723 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 352 components and 0.172723 Jy ![Exited script file: muppet] wmap "J1013-2546_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.023 x 8.927 at -1.783 degrees (North through East) ! Clean map min=-0.0025461 max=0.13742 Jy/beam ! Writing clean map to FITS file: J1013-2546_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137421 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000301873 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.65901 0.65901 1.31802 2.63604 5.27208 10.5442 21.0883 42.1766 84.3532 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.023 x 8.927 at -1.783 degrees (North through East) ! Clean map min=-0.0025461 max=0.13742 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1013-2546_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:06:47 2019