! Started logfile: J1012-3740_S_2017_07_16_pus_uvs.log on Thu May 9 11:06:37 2019 obs J1012-3740_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1012-3740_S_2017_07_16_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.50977 visibilities/baseline/integration-bin. ! Found source: J1012-3740 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 10644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1012-3740_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 475 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 463 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 503 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1160 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993265Jy sigma=0.005921 ! Fit after self-cal, rms=0.926890Jy sigma=0.005563 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.197 mas, bmaj=6.156 mas, bpa=-1.061 degrees ! Estimated noise=2990.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.059129 Jy ! Component: 100 - total flux cleaned = 0.0742162 Jy ! Total flux subtracted in 100 components = 0.0742162 Jy ! Clean residual min=-0.006097 max=0.007739 Jy/beam ! Clean residual mean=-0.000015 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.0742161 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0742161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110966Jy sigma=0.000616 ! Fit after self-cal, rms=0.109831Jy sigma=0.000609 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=7.133 mas, bpa=-0.9175 degrees ! Estimated noise=1674.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00885201 Jy ! Component: 100 - total flux cleaned = 0.0121425 Jy ! Component: 150 - total flux cleaned = 0.0123545 Jy ! Component: 200 - total flux cleaned = 0.0124531 Jy ! Total flux subtracted in 200 components = 0.0124531 Jy ! Clean residual min=-0.004634 max=0.003841 Jy/beam ! Clean residual mean=0.000041 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.0866693 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.0866693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109146Jy sigma=0.000606 ! Fit after self-cal, rms=0.109084Jy sigma=0.000605 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.00* KP 1.00 ! LA 0.96 MK 1.11 NL 1.00* OV 1.02 ! PT 1.16 SC 0.94 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.74 KP 0.98 ! LA 0.99 MK 1.09 NL 1.00* OV 1.00 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 1.00* MK 0.97 NL 0.97 OV 0.89 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.109084Jy sigma=0.000605 ! Fit after self-cal, rms=0.105131Jy sigma=0.000604 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=7.19 mas, bpa=-0.5913 degrees ! Estimated noise=1671.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000669203 Jy ! Component: 100 - total flux cleaned = -0.000669201 Jy ! Component: 150 - total flux cleaned = -0.000632117 Jy ! Component: 200 - total flux cleaned = -0.000564939 Jy ! Total flux subtracted in 200 components = -0.000564939 Jy ! Clean residual min=-0.004061 max=0.003428 Jy/beam ! Clean residual mean=0.000006 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.0861044 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.0861044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105097Jy sigma=0.000604 ! Fit after self-cal, rms=0.104998Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104998Jy sigma=0.000603 ! Fit after self-cal, rms=0.104949Jy sigma=0.000602 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=7.162 mas, bpa=-0.6576 degrees ! Estimated noise=1673.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.78156e-05 Jy ! Component: 100 - total flux cleaned = -1.06215e-05 Jy ! Component: 150 - total flux cleaned = -1.10205e-05 Jy ! Component: 200 - total flux cleaned = 1.13016e-05 Jy ! Total flux subtracted in 200 components = 1.13016e-05 Jy ! Clean residual min=-0.003874 max=0.003424 Jy/beam ! Clean residual mean=0.000005 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.0861157 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0861157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104935Jy sigma=0.000602 ! Fit after self-cal, rms=0.104937Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.50588e-05 Jy ! Component: 100 - total flux cleaned = -2.11226e-06 Jy ! Component: 150 - total flux cleaned = 2.17762e-05 Jy ! Component: 200 - total flux cleaned = 4.3044e-05 Jy ! Total flux subtracted in 200 components = 4.3044e-05 Jy ! Clean residual min=-0.003941 max=0.003535 Jy/beam ! Clean residual mean=0.000005 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.0861587 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0861587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104924Jy sigma=0.000602 ! Fit after self-cal, rms=0.104917Jy sigma=0.000602 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104917Jy sigma=0.000602 ! Fit after self-cal, rms=0.105246Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=7.128 mas, bpa=-0.664 degrees ! Estimated noise=1671.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102617 Jy ! Component: 100 - total flux cleaned = 5.28386e-06 Jy ! Component: 150 - total flux cleaned = -3.4128e-05 Jy ! Component: 200 - total flux cleaned = -1.64562e-05 Jy ! Total flux subtracted in 200 components = -1.64562e-05 Jy ! Clean residual min=-0.003642 max=0.003724 Jy/beam ! Clean residual mean=0.000006 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.0861423 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.0861422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105235Jy sigma=0.000602 ! Fit after self-cal, rms=0.105282Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.13423e-05 Jy ! Component: 100 - total flux cleaned = -5.32831e-05 Jy ! Component: 150 - total flux cleaned = -5.40102e-05 Jy ! Component: 200 - total flux cleaned = -7.15149e-05 Jy ! Total flux subtracted in 200 components = -7.15149e-05 Jy ! Clean residual min=-0.003683 max=0.003756 Jy/beam ! Clean residual mean=0.000006 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.0860707 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0860707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105273Jy sigma=0.000602 ! Fit after self-cal, rms=0.105269Jy sigma=0.000602 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105269Jy sigma=0.000602 ! Fit after self-cal, rms=0.105351Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.533 mas, bmaj=23.21 mas, bpa=-1.327 degrees ! Estimated noise=2307.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525765 Jy ! Component: 100 - total flux cleaned = 0.000526731 Jy ! Component: 150 - total flux cleaned = 0.000527218 Jy ! Component: 200 - total flux cleaned = 0.000525766 Jy ! Total flux subtracted in 200 components = 0.000525766 Jy ! Clean residual min=-0.004314 max=0.004502 Jy/beam ! Clean residual mean=0.000020 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.0865965 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 0.0865965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105353Jy sigma=0.000602 ! Fit after self-cal, rms=0.105373Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.81752e-05 Jy ! Component: 100 - total flux cleaned = 4.76266e-05 Jy ! Component: 150 - total flux cleaned = 3.8378e-05 Jy ! Component: 200 - total flux cleaned = 3.71809e-05 Jy ! Total flux subtracted in 200 components = 3.71809e-05 Jy ! Clean residual min=-0.004327 max=0.004481 Jy/beam ! Clean residual mean=0.000021 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.0866337 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.0866337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105375Jy sigma=0.000602 ! Fit after self-cal, rms=0.105376Jy sigma=0.000602 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=7.119 mas, bpa=-0.6695 degrees ! Estimated noise=1669.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.703 x 7.119 at -0.6695 degrees (North through East) ! Clean map min=-0.003393 max=0.075803 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.228 mas, bmaj=6.121 mas, bpa=-1.062 degrees ! Estimated noise=3002.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0598541 Jy ! Component: 100 - total flux cleaned = 0.0759557 Jy ! Component: 150 - total flux cleaned = 0.0804141 Jy ! Component: 200 - total flux cleaned = 0.0817346 Jy ! Total flux subtracted in 200 components = 0.0817346 Jy ! Clean residual min=-0.005357 max=0.004991 Jy/beam ! Clean residual mean=-0.000013 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.0817346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0817346 Jy ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=7.119 mas, bpa=-0.6695 degrees ! Estimated noise=1669.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310048 Jy ! Component: 100 - total flux cleaned = 0.00332491 Jy ! Component: 150 - total flux cleaned = 0.00344656 Jy ! Component: 200 - total flux cleaned = 0.00360227 Jy ! Total flux subtracted in 200 components = 0.00360227 Jy ! Clean residual min=-0.003812 max=0.003803 Jy/beam ! Clean residual mean=0.000004 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.0853368 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.0853368 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.533 mas, bmaj=23.21 mas, bpa=-1.327 degrees ! Estimated noise=2307.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102672 Jy ! Component: 100 - total flux cleaned = 0.00112957 Jy ! Component: 150 - total flux cleaned = 0.00113204 Jy ! Component: 200 - total flux cleaned = 0.00113466 Jy ! Total flux subtracted in 200 components = 0.00113466 Jy ! Clean residual min=-0.004391 max=0.004459 Jy/beam ! Clean residual mean=0.000019 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.0864715 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.51322e-06 Jy ! Component: 100 - total flux cleaned = 4.8996e-06 Jy ! Component: 150 - total flux cleaned = 7.18476e-06 Jy ! Component: 200 - total flux cleaned = 7.38308e-06 Jy ! Total flux subtracted in 200 components = 7.38308e-06 Jy ! Clean residual min=-0.004368 max=0.004434 Jy/beam ! Clean residual mean=0.000019 rms=0.001531 Jy/beam ! Combined flux in latest and established models = 0.0864789 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 25 components and 0.0864789 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=7.119 mas, bpa=-0.6695 degrees ! Estimated noise=1669.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000766566 Jy ! Component: 100 - total flux cleaned = -0.000802288 Jy ! Component: 150 - total flux cleaned = -0.000742583 Jy ! Component: 200 - total flux cleaned = -0.000714622 Jy ! Total flux subtracted in 200 components = -0.000714622 Jy ! Clean residual min=-0.003709 max=0.003864 Jy/beam ! Clean residual mean=0.000006 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.0857643 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0857643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105382Jy sigma=0.000602 ! Fit after self-cal, rms=0.105375Jy sigma=0.000602 wmodel J1012-3740_S_2017_07_16_pus_map.mod ! Writing 34 model components to file: J1012-3740_S_2017_07_16_pus_map.mod wobs J1012-3740_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1012-3740_S_2017_07_16_pus_uvs.fits wwins J1012-3740_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1012-3740_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000329516 Jy ! Component: 100 - total flux cleaned = -0.000821538 Jy ! Component: 150 - total flux cleaned = -0.00127369 Jy ! Component: 200 - total flux cleaned = -0.00153639 Jy ! Component: 250 - total flux cleaned = -0.0014853 Jy ! Component: 300 - total flux cleaned = -0.00157986 Jy ! Component: 350 - total flux cleaned = -0.00157883 Jy ! Component: 400 - total flux cleaned = -0.00153464 Jy ! Component: 450 - total flux cleaned = -0.0014529 Jy ! Component: 500 - total flux cleaned = -0.00141405 Jy ! Component: 550 - total flux cleaned = -0.0014903 Jy ! Component: 600 - total flux cleaned = -0.00134545 Jy ! Component: 650 - total flux cleaned = -0.0014158 Jy ! Component: 700 - total flux cleaned = -0.00127971 Jy ! Component: 750 - total flux cleaned = -0.00127911 Jy ! Component: 800 - total flux cleaned = -0.00108824 Jy ! Component: 850 - total flux cleaned = -0.000965347 Jy ! Component: 900 - total flux cleaned = -0.000964954 Jy ! Component: 950 - total flux cleaned = -0.000877798 Jy ! Component: 1000 - total flux cleaned = -0.000765393 Jy ! Component: 1050 - total flux cleaned = -0.000710603 Jy ! Component: 1100 - total flux cleaned = -0.000656543 Jy ! Component: 1150 - total flux cleaned = -0.000630123 Jy ! Component: 1200 - total flux cleaned = -0.000551931 Jy ! Component: 1250 - total flux cleaned = -0.000577723 Jy ! Component: 1300 - total flux cleaned = -0.00067814 Jy ! Component: 1350 - total flux cleaned = -0.0006779 Jy ! Component: 1400 - total flux cleaned = -0.000678066 Jy ! Component: 1450 - total flux cleaned = -0.00067801 Jy ! Component: 1500 - total flux cleaned = -0.000677797 Jy ! Component: 1550 - total flux cleaned = -0.000585164 Jy ! Component: 1600 - total flux cleaned = -0.000607609 Jy ! Component: 1650 - total flux cleaned = -0.000540049 Jy ! Component: 1700 - total flux cleaned = -0.000473906 Jy ! Component: 1750 - total flux cleaned = -0.000408882 Jy ! Component: 1800 - total flux cleaned = -0.000301583 Jy ! Component: 1850 - total flux cleaned = -0.000259406 Jy ! Component: 1900 - total flux cleaned = -0.00015519 Jy ! Component: 1950 - total flux cleaned = -5.26611e-05 Jy ! Component: 2000 - total flux cleaned = -5.28372e-05 Jy ! Component: 2050 - total flux cleaned = 4.68668e-05 Jy ! Component: 2100 - total flux cleaned = 0.000105927 Jy ! Component: 2150 - total flux cleaned = 0.000184027 Jy ! Component: 2200 - total flux cleaned = 0.000280533 Jy ! Component: 2250 - total flux cleaned = 0.000356901 Jy ! Component: 2300 - total flux cleaned = 0.00045121 Jy ! Component: 2350 - total flux cleaned = 0.00052596 Jy ! Component: 2400 - total flux cleaned = 0.000581495 Jy ! Component: 2450 - total flux cleaned = 0.000691126 Jy ! Component: 2500 - total flux cleaned = 0.000763449 Jy ! Component: 2550 - total flux cleaned = 0.000817314 Jy ! Component: 2600 - total flux cleaned = 0.000942013 Jy ! Component: 2650 - total flux cleaned = 0.00108349 Jy ! Component: 2700 - total flux cleaned = 0.00117135 Jy ! Component: 2750 - total flux cleaned = 0.00129363 Jy ! Component: 2800 - total flux cleaned = 0.00143258 Jy ! Component: 2850 - total flux cleaned = 0.00160502 Jy ! Component: 2900 - total flux cleaned = 0.00169069 Jy ! Component: 2950 - total flux cleaned = 0.0018272 Jy ! Component: 3000 - total flux cleaned = 0.00194593 Jy ! Component: 3050 - total flux cleaned = 0.0020472 Jy ! Component: 3100 - total flux cleaned = 0.00223204 Jy ! Component: 3150 - total flux cleaned = 0.00231552 Jy ! Component: 3200 - total flux cleaned = 0.00243206 Jy ! Component: 3250 - total flux cleaned = 0.00254796 Jy ! Component: 3300 - total flux cleaned = 0.00264697 Jy ! Component: 3350 - total flux cleaned = 0.00279491 Jy ! Component: 3400 - total flux cleaned = 0.00289298 Jy ! Component: 3450 - total flux cleaned = 0.00297456 Jy ! Component: 3500 - total flux cleaned = 0.00310449 Jy ! Component: 3550 - total flux cleaned = 0.00320169 Jy ! Component: 3600 - total flux cleaned = 0.00333097 Jy ! Component: 3650 - total flux cleaned = 0.00342764 Jy ! Component: 3700 - total flux cleaned = 0.00357227 Jy ! Component: 3750 - total flux cleaned = 0.00368446 Jy ! Component: 3800 - total flux cleaned = 0.00378038 Jy ! Component: 3850 - total flux cleaned = 0.0038602 Jy ! Component: 3900 - total flux cleaned = 0.00398766 Jy ! Component: 3950 - total flux cleaned = 0.00406715 Jy ! Component: 4000 - total flux cleaned = 0.00421019 Jy ! Component: 4050 - total flux cleaned = 0.00430547 Jy ! Total flux subtracted in 4096 components = 0.00440065 Jy ! Clean residual min=-0.000864 max=0.001083 Jy/beam ! Clean residual mean=0.000008 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0901649 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 293 components and 0.0901649 Jy ![Exited script file: muppet] wmap "J1012-3740_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.703 x 7.119 at -0.6695 degrees (North through East) ! Clean map min=-0.0019851 max=0.076044 Jy/beam ! Writing clean map to FITS file: J1012-3740_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0760436 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000256291 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01109 1.01109 2.02219 4.04438 8.08876 16.1775 32.355 64.7101 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.703 x 7.119 at -0.6695 degrees (North through East) ! Clean map min=-0.0019851 max=0.076044 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1012-3740_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:06:42 2019