! Started logfile: J1012+2312_S_2017_02_19_pus_uvs.log on Sat May 4 18:48:26 2019 obs J1012+2312_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1012+2312_S_2017_02_19_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.576923 visibilities/baseline/integration-bin. ! Found source: J1012+2312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 10800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1012+2312_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 527 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.872913Jy sigma=0.008026 ! Fit after self-cal, rms=0.865069Jy sigma=0.007961 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=7.049 mas, bpa=11.74 degrees ! Estimated noise=1291.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105721 Jy ! Component: 100 - total flux cleaned = 0.128921 Jy ! Total flux subtracted in 100 components = 0.128921 Jy ! Clean residual min=-0.004793 max=0.007230 Jy/beam ! Clean residual mean=-0.000020 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.128921 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.128921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082362Jy sigma=0.000694 ! Fit after self-cal, rms=0.082352Jy sigma=0.000694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.93 mas, bmaj=7.801 mas, bpa=10.77 degrees ! Estimated noise=821.511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00852808 Jy ! Component: 100 - total flux cleaned = 0.0127272 Jy ! Component: 150 - total flux cleaned = 0.0149418 Jy ! Component: 200 - total flux cleaned = 0.0162625 Jy ! Total flux subtracted in 200 components = 0.0162625 Jy ! Clean residual min=-0.003663 max=0.004079 Jy/beam ! Clean residual mean=-0.000017 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.145183 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 28 components and 0.145183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081269Jy sigma=0.000689 ! Fit after self-cal, rms=0.081244Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.08 HN 0.97 KP 1.09 ! LA 1.01 MK 1.05 NL 0.88 OV 1.05 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.02 KP 1.01 ! LA 0.98 MK 1.03 NL 1.10 OV 1.07 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.99 KP 0.91 ! LA 0.75 MK 1.07 NL 1.31 OV 0.97 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.91 KP 1.00* ! LA 0.77 MK 1.10 NL 1.00* OV 1.05 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.081244Jy sigma=0.000688 ! Fit after self-cal, rms=0.077559Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.941 mas, bmaj=7.806 mas, bpa=10.84 degrees ! Estimated noise=821.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.08969e-05 Jy ! Component: 100 - total flux cleaned = 7.43807e-05 Jy ! Component: 150 - total flux cleaned = 0.000164784 Jy ! Component: 200 - total flux cleaned = 0.000150683 Jy ! Total flux subtracted in 200 components = 0.000150683 Jy ! Clean residual min=-0.002458 max=0.002873 Jy/beam ! Clean residual mean=-0.000006 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.145334 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.145334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077539Jy sigma=0.000669 ! Fit after self-cal, rms=0.077528Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077528Jy sigma=0.000668 ! Fit after self-cal, rms=0.077443Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=7.808 mas, bpa=10.91 degrees ! Estimated noise=822.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.6953e-05 Jy ! Component: 100 - total flux cleaned = 9.38469e-05 Jy ! Component: 150 - total flux cleaned = 0.000106961 Jy ! Component: 200 - total flux cleaned = 0.000107076 Jy ! Total flux subtracted in 200 components = 0.000107076 Jy ! Clean residual min=-0.002007 max=0.002033 Jy/beam ! Clean residual mean=-0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.145441 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.145441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077437Jy sigma=0.000661 ! Fit after self-cal, rms=0.077464Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (65.5, -53.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971067 Jy ! Component: 100 - total flux cleaned = 0.00104392 Jy ! Component: 150 - total flux cleaned = 0.000963904 Jy ! Component: 200 - total flux cleaned = 0.0010112 Jy ! Total flux subtracted in 200 components = 0.0010112 Jy ! Clean residual min=-0.001850 max=0.001784 Jy/beam ! Clean residual mean=-0.000002 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.146452 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.146452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077418Jy sigma=0.000661 ! Fit after self-cal, rms=0.077414Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077414Jy sigma=0.000661 ! Fit after self-cal, rms=0.077564Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=7.812 mas, bpa=10.95 degrees ! Estimated noise=823.502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291844 Jy ! Component: 100 - total flux cleaned = 0.000291205 Jy ! Component: 150 - total flux cleaned = 0.000353315 Jy ! Component: 200 - total flux cleaned = 0.000410265 Jy ! Total flux subtracted in 200 components = 0.000410265 Jy ! Clean residual min=-0.001850 max=0.001736 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.146863 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 90 components and 0.146862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077549Jy sigma=0.000661 ! Fit after self-cal, rms=0.077550Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109051 Jy ! Component: 100 - total flux cleaned = 0.000144133 Jy ! Component: 150 - total flux cleaned = 0.000194023 Jy ! Component: 200 - total flux cleaned = 0.000240704 Jy ! Total flux subtracted in 200 components = 0.000240704 Jy ! Clean residual min=-0.001811 max=0.001702 Jy/beam ! Clean residual mean=-0.000000 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.147103 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 100 components and 0.147103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077542Jy sigma=0.000661 ! Fit after self-cal, rms=0.077542Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077542Jy sigma=0.000661 ! Fit after self-cal, rms=0.077575Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.002 mas, bmaj=9.326 mas, bpa=1.824 degrees ! Estimated noise=986.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125721 Jy ! Component: 100 - total flux cleaned = 7.50616e-05 Jy ! Component: 150 - total flux cleaned = 0.000288692 Jy ! Component: 200 - total flux cleaned = 0.000416522 Jy ! Total flux subtracted in 200 components = 0.000416522 Jy ! Clean residual min=-0.001814 max=0.001672 Jy/beam ! Clean residual mean=0.000002 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.14752 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.14752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077570Jy sigma=0.000661 ! Fit after self-cal, rms=0.077569Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.86339e-05 Jy ! Component: 100 - total flux cleaned = 0.000130685 Jy ! Component: 150 - total flux cleaned = 0.000226968 Jy ! Component: 200 - total flux cleaned = 0.000312796 Jy ! Total flux subtracted in 200 components = 0.000312796 Jy ! Clean residual min=-0.001820 max=0.001660 Jy/beam ! Clean residual mean=0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.147832 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 113 components and 0.147832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077567Jy sigma=0.000661 ! Fit after self-cal, rms=0.077566Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=7.812 mas, bpa=10.95 degrees ! Estimated noise=823.858 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.942 x 7.812 at 10.95 degrees (North through East) ! Clean map min=-0.0017107 max=0.13662 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=7.058 mas, bpa=11.87 degrees ! Estimated noise=1291.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105683 Jy ! Component: 100 - total flux cleaned = 0.128917 Jy ! Component: 150 - total flux cleaned = 0.136783 Jy ! Component: 200 - total flux cleaned = 0.140845 Jy ! Total flux subtracted in 200 components = 0.140845 Jy ! Clean residual min=-0.002717 max=0.002751 Jy/beam ! Clean residual mean=-0.000003 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.140845 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.140845 Jy ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=7.812 mas, bpa=10.95 degrees ! Estimated noise=823.858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257087 Jy ! Component: 100 - total flux cleaned = 0.00363931 Jy ! Component: 150 - total flux cleaned = 0.00408218 Jy ! Component: 200 - total flux cleaned = 0.00433547 Jy ! Total flux subtracted in 200 components = 0.00433547 Jy ! Clean residual min=-0.002030 max=0.001786 Jy/beam ! Clean residual mean=-0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.145181 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.145181 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.002 mas, bmaj=9.326 mas, bpa=1.824 degrees ! Estimated noise=986.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00098021 Jy ! Component: 100 - total flux cleaned = 0.00152816 Jy ! Component: 150 - total flux cleaned = 0.00194668 Jy ! Component: 200 - total flux cleaned = 0.00227412 Jy ! Total flux subtracted in 200 components = 0.00227412 Jy ! Clean residual min=-0.001841 max=0.001759 Jy/beam ! Clean residual mean=0.000001 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.147455 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155401 Jy ! Component: 100 - total flux cleaned = 0.000255629 Jy ! Component: 150 - total flux cleaned = 0.000365273 Jy ! Component: 200 - total flux cleaned = 0.000479894 Jy ! Total flux subtracted in 200 components = 0.000479894 Jy ! Clean residual min=-0.001823 max=0.001696 Jy/beam ! Clean residual mean=0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.147935 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 63 components and 0.147935 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=7.812 mas, bpa=10.95 degrees ! Estimated noise=823.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000349373 Jy ! Component: 100 - total flux cleaned = -0.000395785 Jy ! Component: 150 - total flux cleaned = -0.000457076 Jy ! Component: 200 - total flux cleaned = -0.000475685 Jy ! Total flux subtracted in 200 components = -0.000475685 Jy ! Clean residual min=-0.001800 max=0.001688 Jy/beam ! Clean residual mean=-0.000000 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.147459 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.147459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077580Jy sigma=0.000661 ! Fit after self-cal, rms=0.077577Jy sigma=0.000661 wmodel J1012+2312_S_2017_02_19_pus_map.mod ! Writing 83 model components to file: J1012+2312_S_2017_02_19_pus_map.mod wobs J1012+2312_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1012+2312_S_2017_02_19_pus_uvs.fits wwins J1012+2312_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J1012+2312_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000263712 Jy ! Component: 100 - total flux cleaned = -0.000320925 Jy ! Component: 150 - total flux cleaned = -0.000375909 Jy ! Component: 200 - total flux cleaned = -0.000482363 Jy ! Component: 250 - total flux cleaned = -0.000558591 Jy ! Component: 300 - total flux cleaned = -0.000582971 Jy ! Component: 350 - total flux cleaned = -0.000558597 Jy ! Component: 400 - total flux cleaned = -0.000488297 Jy ! Component: 450 - total flux cleaned = -0.000419251 Jy ! Component: 500 - total flux cleaned = -0.000441431 Jy ! Component: 550 - total flux cleaned = -0.000353238 Jy ! Component: 600 - total flux cleaned = -0.000353692 Jy ! Component: 650 - total flux cleaned = -0.000353902 Jy ! Component: 700 - total flux cleaned = -0.000353507 Jy ! Component: 750 - total flux cleaned = -0.000332963 Jy ! Component: 800 - total flux cleaned = -0.000352934 Jy ! Component: 850 - total flux cleaned = -0.000273058 Jy ! Component: 900 - total flux cleaned = -0.000214332 Jy ! Component: 950 - total flux cleaned = -0.000194982 Jy ! Component: 1000 - total flux cleaned = -0.00017598 Jy ! Component: 1050 - total flux cleaned = -0.000176148 Jy ! Component: 1100 - total flux cleaned = -0.000213316 Jy ! Component: 1150 - total flux cleaned = -0.000213247 Jy ! Component: 1200 - total flux cleaned = -0.000249355 Jy ! Component: 1250 - total flux cleaned = -0.000231397 Jy ! Component: 1300 - total flux cleaned = -0.000249113 Jy ! Component: 1350 - total flux cleaned = -0.00024921 Jy ! Component: 1400 - total flux cleaned = -0.000180483 Jy ! Component: 1450 - total flux cleaned = -0.000282467 Jy ! Component: 1500 - total flux cleaned = -0.000265727 Jy ! Component: 1550 - total flux cleaned = -0.000265535 Jy ! Component: 1600 - total flux cleaned = -0.000281655 Jy ! Component: 1650 - total flux cleaned = -0.000249283 Jy ! Component: 1700 - total flux cleaned = -0.000281251 Jy ! Component: 1750 - total flux cleaned = -0.000297368 Jy ! Component: 1800 - total flux cleaned = -0.000297287 Jy ! Component: 1850 - total flux cleaned = -0.000312659 Jy ! Component: 1900 - total flux cleaned = -0.000343343 Jy ! Component: 1950 - total flux cleaned = -0.000297422 Jy ! Component: 2000 - total flux cleaned = -0.000342535 Jy ! Component: 2050 - total flux cleaned = -0.000297613 Jy ! Component: 2100 - total flux cleaned = -0.000312641 Jy ! Component: 2150 - total flux cleaned = -0.000312535 Jy ! Component: 2200 - total flux cleaned = -0.000355763 Jy ! Component: 2250 - total flux cleaned = -0.000312381 Jy ! Component: 2300 - total flux cleaned = -0.000326529 Jy ! Component: 2350 - total flux cleaned = -0.000284411 Jy ! Component: 2400 - total flux cleaned = -0.000242619 Jy ! Component: 2450 - total flux cleaned = -0.000311582 Jy ! Component: 2500 - total flux cleaned = -0.000229513 Jy ! Component: 2550 - total flux cleaned = -0.000243021 Jy ! Component: 2600 - total flux cleaned = -0.000229676 Jy ! Component: 2650 - total flux cleaned = -0.000176455 Jy ! Component: 2700 - total flux cleaned = -0.000189537 Jy ! Component: 2750 - total flux cleaned = -0.000163158 Jy ! Component: 2800 - total flux cleaned = -0.000124192 Jy ! Component: 2850 - total flux cleaned = -8.54878e-05 Jy ! Component: 2900 - total flux cleaned = -2.16517e-05 Jy ! Component: 2950 - total flux cleaned = -4.71828e-05 Jy ! Component: 3000 - total flux cleaned = -3.4513e-05 Jy ! Component: 3050 - total flux cleaned = 2.8083e-05 Jy ! Component: 3100 - total flux cleaned = 9.01137e-05 Jy ! Component: 3150 - total flux cleaned = 0.000102412 Jy ! Component: 3200 - total flux cleaned = 0.000126872 Jy ! Component: 3250 - total flux cleaned = 9.05332e-05 Jy ! Component: 3300 - total flux cleaned = 0.000162886 Jy ! Component: 3350 - total flux cleaned = 0.000210816 Jy ! Component: 3400 - total flux cleaned = 0.000187092 Jy ! Component: 3450 - total flux cleaned = 0.00021068 Jy ! Component: 3500 - total flux cleaned = 0.00025732 Jy ! Component: 3550 - total flux cleaned = 0.000199213 Jy ! Component: 3600 - total flux cleaned = 0.000245292 Jy ! Component: 3650 - total flux cleaned = 0.000256727 Jy ! Component: 3700 - total flux cleaned = 0.000279459 Jy ! Component: 3750 - total flux cleaned = 0.000222975 Jy ! Component: 3800 - total flux cleaned = 0.00025659 Jy ! Component: 3850 - total flux cleaned = 0.000256453 Jy ! Component: 3900 - total flux cleaned = 0.000234321 Jy ! Component: 3950 - total flux cleaned = 0.000245356 Jy ! Component: 4000 - total flux cleaned = 0.000234389 Jy ! Component: 4050 - total flux cleaned = 0.000212597 Jy ! Total flux subtracted in 4096 components = 0.000169351 Jy ! Clean residual min=-0.000618 max=0.000625 Jy/beam ! Clean residual mean=-0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.147628 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 417 components and 0.147628 Jy ![Exited script file: muppet] wmap "J1012+2312_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.942 x 7.812 at 10.95 degrees (North through East) ! Clean map min=-0.0014529 max=0.13655 Jy/beam ! Writing clean map to FITS file: J1012+2312_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136551 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203401 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.446866 0.446866 0.893733 1.78747 3.57493 7.14986 14.2997 28.5995 57.1989 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.942 x 7.812 at 10.95 degrees (North through East) ! Clean map min=-0.0014529 max=0.13655 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1012+2312_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:48:30 2019