! Started logfile: J1011-3223_S_2017_07_16_pus_uvs.log on Thu May 9 11:06:32 2019 obs J1011-3223_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1011-3223_S_2017_07_16_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.690268 visibilities/baseline/integration-bin. ! Found source: J1011-3223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 18016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1011-3223_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 430 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1159 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.922429Jy sigma=0.005652 ! Fit after self-cal, rms=0.888258Jy sigma=0.005448 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=6.333 mas, bpa=-5.25 degrees ! Estimated noise=1966.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0893672 Jy ! Component: 100 - total flux cleaned = 0.109112 Jy ! Total flux subtracted in 100 components = 0.109112 Jy ! Clean residual min=-0.007498 max=0.008237 Jy/beam ! Clean residual mean=-0.000067 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.109112 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.109112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118929Jy sigma=0.000670 ! Fit after self-cal, rms=0.118889Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=7.131 mas, bpa=-5.229 degrees ! Estimated noise=1111.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103127 Jy ! Component: 100 - total flux cleaned = 0.0145735 Jy ! Component: 150 - total flux cleaned = 0.0166329 Jy ! Component: 200 - total flux cleaned = 0.0174711 Jy ! Total flux subtracted in 200 components = 0.0174711 Jy ! Clean residual min=-0.004138 max=0.004773 Jy/beam ! Clean residual mean=-0.000030 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.126583 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.126583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118194Jy sigma=0.000664 ! Fit after self-cal, rms=0.118201Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 1.00* HN 1.06 KP 1.01 ! LA 0.98 MK 1.01 NL 0.84 OV 0.96 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.15 KP 0.99 ! LA 0.94 MK 1.02 NL 1.06 OV 0.98 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.23 KP 0.96 ! LA 0.95 MK 1.03 NL 1.02 OV 0.94 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.00* ! LA 0.87 MK 0.86 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.118201Jy sigma=0.000664 ! Fit after self-cal, rms=0.125290Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=7.17 mas, bpa=-4.786 degrees ! Estimated noise=1121.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000505019 Jy ! Component: 100 - total flux cleaned = -0.000533467 Jy ! Component: 150 - total flux cleaned = -0.000509099 Jy ! Component: 200 - total flux cleaned = -0.00051052 Jy ! Total flux subtracted in 200 components = -0.00051052 Jy ! Clean residual min=-0.003496 max=0.003544 Jy/beam ! Clean residual mean=-0.000002 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.126073 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.126073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125282Jy sigma=0.000662 ! Fit after self-cal, rms=0.125541Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125541Jy sigma=0.000662 ! Fit after self-cal, rms=0.126684Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=7.181 mas, bpa=-4.787 degrees ! Estimated noise=1125.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347818 Jy ! Component: 100 - total flux cleaned = -0.000350235 Jy ! Component: 150 - total flux cleaned = -0.000352033 Jy ! Component: 200 - total flux cleaned = -0.000352986 Jy ! Total flux subtracted in 200 components = -0.000352986 Jy ! Clean residual min=-0.002856 max=0.002980 Jy/beam ! Clean residual mean=0.000010 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.12572 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.12572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126676Jy sigma=0.000661 ! Fit after self-cal, rms=0.126721Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.69412e-05 Jy ! Component: 100 - total flux cleaned = 1.29109e-05 Jy ! Component: 150 - total flux cleaned = -2.93174e-06 Jy ! Component: 200 - total flux cleaned = -2.99426e-06 Jy ! Total flux subtracted in 200 components = -2.99426e-06 Jy ! Clean residual min=-0.002838 max=0.002990 Jy/beam ! Clean residual mean=0.000010 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.125717 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.125717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126716Jy sigma=0.000661 ! Fit after self-cal, rms=0.126717Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126717Jy sigma=0.000661 ! Fit after self-cal, rms=0.127941Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=7.186 mas, bpa=-4.777 degrees ! Estimated noise=1129.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.11867e-05 Jy ! Component: 100 - total flux cleaned = -1.2343e-05 Jy ! Component: 150 - total flux cleaned = -1.20492e-05 Jy ! Component: 200 - total flux cleaned = 4.24162e-06 Jy ! Total flux subtracted in 200 components = 4.24162e-06 Jy ! Clean residual min=-0.002676 max=0.002684 Jy/beam ! Clean residual mean=0.000020 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.125721 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.125721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127935Jy sigma=0.000661 ! Fit after self-cal, rms=0.127966Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.63046e-06 Jy ! Component: 100 - total flux cleaned = -2.21006e-05 Jy ! Component: 150 - total flux cleaned = -3.54024e-05 Jy ! Component: 200 - total flux cleaned = -3.52611e-05 Jy ! Total flux subtracted in 200 components = -3.52611e-05 Jy ! Clean residual min=-0.002681 max=0.002687 Jy/beam ! Clean residual mean=0.000020 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.125686 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.125686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127962Jy sigma=0.000661 ! Fit after self-cal, rms=0.127962Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127962Jy sigma=0.000661 ! Fit after self-cal, rms=0.128397Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.754 mas, bmaj=20.97 mas, bpa=-3.171 degrees ! Estimated noise=1533.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297624 Jy ! Component: 100 - total flux cleaned = -0.000296224 Jy ! Component: 150 - total flux cleaned = -0.000295555 Jy ! Component: 200 - total flux cleaned = -0.000295161 Jy ! Total flux subtracted in 200 components = -0.000295161 Jy ! Clean residual min=-0.002969 max=0.003284 Jy/beam ! Clean residual mean=0.000044 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.125391 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.125391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128398Jy sigma=0.000661 ! Fit after self-cal, rms=0.128402Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.27376e-06 Jy ! Component: 100 - total flux cleaned = -3.20447e-06 Jy ! Component: 150 - total flux cleaned = -2.25199e-06 Jy ! Component: 200 - total flux cleaned = -2.37122e-06 Jy ! Total flux subtracted in 200 components = -2.37122e-06 Jy ! Clean residual min=-0.002939 max=0.003277 Jy/beam ! Clean residual mean=0.000044 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.125388 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.125388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128403Jy sigma=0.000661 ! Fit after self-cal, rms=0.128402Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.729 mas, bmaj=7.188 mas, bpa=-4.749 degrees ! Estimated noise=1133.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.729 x 7.188 at -4.749 degrees (North through East) ! Clean map min=-0.0024861 max=0.12154 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=6.257 mas, bpa=-5.019 degrees ! Estimated noise=2074.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0933092 Jy ! Component: 100 - total flux cleaned = 0.114157 Jy ! Component: 150 - total flux cleaned = 0.121377 Jy ! Component: 200 - total flux cleaned = 0.124084 Jy ! Total flux subtracted in 200 components = 0.124084 Jy ! Clean residual min=-0.005559 max=0.005481 Jy/beam ! Clean residual mean=-0.000003 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.124084 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.124084 Jy ! Inverting map and beam ! Estimated beam: bmin=2.729 mas, bmaj=7.188 mas, bpa=-4.749 degrees ! Estimated noise=1133.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248226 Jy ! Component: 100 - total flux cleaned = 0.00254199 Jy ! Component: 150 - total flux cleaned = 0.00244228 Jy ! Component: 200 - total flux cleaned = 0.00240118 Jy ! Total flux subtracted in 200 components = 0.00240118 Jy ! Clean residual min=-0.002813 max=0.002869 Jy/beam ! Clean residual mean=0.000024 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.126485 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.126485 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.754 mas, bmaj=20.97 mas, bpa=-3.171 degrees ! Estimated noise=1533.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00083593 Jy ! Component: 100 - total flux cleaned = -0.000897748 Jy ! Component: 150 - total flux cleaned = -0.00091138 Jy ! Component: 200 - total flux cleaned = -0.000934977 Jy ! Total flux subtracted in 200 components = -0.000934977 Jy ! Clean residual min=-0.002989 max=0.003336 Jy/beam ! Clean residual mean=0.000046 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.12555 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.07421e-05 Jy ! Component: 100 - total flux cleaned = -3.07162e-05 Jy ! Component: 150 - total flux cleaned = -3.98294e-05 Jy ! Component: 200 - total flux cleaned = -4.7949e-05 Jy ! Total flux subtracted in 200 components = -4.7949e-05 Jy ! Clean residual min=-0.002962 max=0.003332 Jy/beam ! Clean residual mean=0.000045 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.125502 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.125502 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.729 mas, bmaj=7.188 mas, bpa=-4.749 degrees ! Estimated noise=1133.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838694 Jy ! Component: 100 - total flux cleaned = 0.000799982 Jy ! Component: 150 - total flux cleaned = 0.000732272 Jy ! Component: 200 - total flux cleaned = 0.000671813 Jy ! Total flux subtracted in 200 components = 0.000671813 Jy ! Clean residual min=-0.002674 max=0.002792 Jy/beam ! Clean residual mean=0.000022 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.126174 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.126174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128416Jy sigma=0.000661 ! Fit after self-cal, rms=0.128404Jy sigma=0.000661 wmodel J1011-3223_S_2017_07_16_pus_map.mod ! Writing 44 model components to file: J1011-3223_S_2017_07_16_pus_map.mod wobs J1011-3223_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1011-3223_S_2017_07_16_pus_uvs.fits wwins J1011-3223_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1011-3223_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728425 Jy ! Component: 100 - total flux cleaned = 0.00119676 Jy ! Component: 150 - total flux cleaned = 0.00159422 Jy ! Component: 200 - total flux cleaned = 0.00180346 Jy ! Component: 250 - total flux cleaned = 0.00188266 Jy ! Component: 300 - total flux cleaned = 0.00207327 Jy ! Component: 350 - total flux cleaned = 0.00225769 Jy ! Component: 400 - total flux cleaned = 0.00243637 Jy ! Component: 450 - total flux cleaned = 0.00257485 Jy ! Component: 500 - total flux cleaned = 0.00277564 Jy ! Component: 550 - total flux cleaned = 0.00290497 Jy ! Component: 600 - total flux cleaned = 0.0030312 Jy ! Component: 650 - total flux cleaned = 0.00318441 Jy ! Component: 700 - total flux cleaned = 0.00336283 Jy ! Component: 750 - total flux cleaned = 0.00350756 Jy ! Component: 800 - total flux cleaned = 0.00359299 Jy ! Component: 850 - total flux cleaned = 0.00375858 Jy ! Component: 900 - total flux cleaned = 0.00386608 Jy ! Component: 950 - total flux cleaned = 0.00394463 Jy ! Component: 1000 - total flux cleaned = 0.00410027 Jy ! Component: 1050 - total flux cleaned = 0.00422751 Jy ! Component: 1100 - total flux cleaned = 0.00437785 Jy ! Component: 1150 - total flux cleaned = 0.00432824 Jy ! Component: 1200 - total flux cleaned = 0.00449848 Jy ! Component: 1250 - total flux cleaned = 0.00461877 Jy ! Component: 1300 - total flux cleaned = 0.00483041 Jy ! Component: 1350 - total flux cleaned = 0.00499249 Jy ! Component: 1400 - total flux cleaned = 0.00506085 Jy ! Component: 1450 - total flux cleaned = 0.00530819 Jy ! Component: 1500 - total flux cleaned = 0.00537454 Jy ! Component: 1550 - total flux cleaned = 0.00546186 Jy ! Component: 1600 - total flux cleaned = 0.00552636 Jy ! Component: 1650 - total flux cleaned = 0.00559019 Jy ! Component: 1700 - total flux cleaned = 0.0056949 Jy ! Component: 1750 - total flux cleaned = 0.00581905 Jy ! Component: 1800 - total flux cleaned = 0.00594157 Jy ! Component: 1850 - total flux cleaned = 0.00598182 Jy ! Component: 1900 - total flux cleaned = 0.00610136 Jy ! Component: 1950 - total flux cleaned = 0.00616001 Jy ! Component: 2000 - total flux cleaned = 0.00623759 Jy ! Component: 2050 - total flux cleaned = 0.00627613 Jy ! Component: 2100 - total flux cleaned = 0.00644735 Jy ! Component: 2150 - total flux cleaned = 0.00648469 Jy ! Component: 2200 - total flux cleaned = 0.00659609 Jy ! Component: 2250 - total flux cleaned = 0.0066696 Jy ! Component: 2300 - total flux cleaned = 0.00674262 Jy ! Component: 2350 - total flux cleaned = 0.0069049 Jy ! Component: 2400 - total flux cleaned = 0.00695856 Jy ! Component: 2450 - total flux cleaned = 0.00706473 Jy ! Component: 2500 - total flux cleaned = 0.00713453 Jy ! Component: 2550 - total flux cleaned = 0.00723856 Jy ! Component: 2600 - total flux cleaned = 0.00730719 Jy ! Component: 2650 - total flux cleaned = 0.00740933 Jy ! Component: 2700 - total flux cleaned = 0.00744289 Jy ! Component: 2750 - total flux cleaned = 0.00754314 Jy ! Component: 2800 - total flux cleaned = 0.00760942 Jy ! Component: 2850 - total flux cleaned = 0.00767531 Jy ! Component: 2900 - total flux cleaned = 0.00772434 Jy ! Component: 2950 - total flux cleaned = 0.00780511 Jy ! Component: 3000 - total flux cleaned = 0.00790117 Jy ! Component: 3050 - total flux cleaned = 0.00794878 Jy ! Component: 3100 - total flux cleaned = 0.0080592 Jy ! Component: 3150 - total flux cleaned = 0.00810613 Jy ! Component: 3200 - total flux cleaned = 0.00821495 Jy ! Component: 3250 - total flux cleaned = 0.00833819 Jy ! Component: 3300 - total flux cleaned = 0.00846065 Jy ! Component: 3350 - total flux cleaned = 0.00855185 Jy ! Component: 3400 - total flux cleaned = 0.00861226 Jy ! Component: 3450 - total flux cleaned = 0.00871743 Jy ! Component: 3500 - total flux cleaned = 0.00882171 Jy ! Component: 3550 - total flux cleaned = 0.00894013 Jy ! Component: 3600 - total flux cleaned = 0.00902828 Jy ! Component: 3650 - total flux cleaned = 0.00914493 Jy ! Component: 3700 - total flux cleaned = 0.00920292 Jy ! Component: 3750 - total flux cleaned = 0.00930398 Jy ! Component: 3800 - total flux cleaned = 0.00939002 Jy ! Component: 3850 - total flux cleaned = 0.00947562 Jy ! Component: 3900 - total flux cleaned = 0.00954653 Jy ! Component: 3950 - total flux cleaned = 0.00961704 Jy ! Component: 4000 - total flux cleaned = 0.00970135 Jy ! Component: 4050 - total flux cleaned = 0.00974331 Jy ! Total flux subtracted in 4096 components = 0.00984069 Jy ! Clean residual min=-0.000760 max=0.000791 Jy/beam ! Clean residual mean=0.000008 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.136014 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 309 components and 0.136014 Jy ![Exited script file: muppet] wmap "J1011-3223_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.729 x 7.188 at -4.749 degrees (North through East) ! Clean map min=-0.0019071 max=0.12112 Jy/beam ! Writing clean map to FITS file: J1011-3223_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121118 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228295 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.565468 0.565468 1.13094 2.26187 4.52375 9.0475 18.095 36.19 72.38 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.729 x 7.188 at -4.749 degrees (North through East) ! Clean map min=-0.0019071 max=0.12112 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1011-3223_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:06:37 2019