! Started logfile: J1011-0423_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:45:29 2019 obs J1011-0423_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1011-0423_S_2017_05_31_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.914679 visibilities/baseline/integration-bin. ! Found source: J1011-0423 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 35892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1011-0423_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1072 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959955Jy sigma=0.007322 ! Fit after self-cal, rms=0.935044Jy sigma=0.007185 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=6.831 mas, bpa=-4.24 degrees ! Estimated noise=1042.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0501944 Jy ! Component: 100 - total flux cleaned = 0.0628743 Jy ! Total flux subtracted in 100 components = 0.0628743 Jy ! Clean residual min=-0.004963 max=0.009360 Jy/beam ! Clean residual mean=-0.000001 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.0628743 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0628743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140008Jy sigma=0.000702 ! Fit after self-cal, rms=0.139819Jy sigma=0.000700 ! Inverting map ! Added new window around map position (-5, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00886737 Jy ! Component: 100 - total flux cleaned = 0.0141829 Jy ! Total flux subtracted in 100 components = 0.0141829 Jy ! Clean residual min=-0.004575 max=0.005845 Jy/beam ! Clean residual mean=-0.000002 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.0770573 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.0770573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138532Jy sigma=0.000693 ! Fit after self-cal, rms=0.138395Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=8.14 mas, bpa=-2.889 degrees ! Estimated noise=570.977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791395 Jy ! Component: 100 - total flux cleaned = 0.011665 Jy ! Component: 150 - total flux cleaned = 0.0140849 Jy ! Component: 200 - total flux cleaned = 0.0156879 Jy ! Total flux subtracted in 200 components = 0.0156879 Jy ! Clean residual min=-0.003230 max=0.004217 Jy/beam ! Clean residual mean=0.000002 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.0927451 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 57 components and 0.0927451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137510Jy sigma=0.000689 ! Fit after self-cal, rms=0.137349Jy sigma=0.000687 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.94 HN 1.25 KP 1.01 ! LA 1.00 MK 1.05 NL 0.96 OV 1.12 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.44 FD 0.97 HN 1.04 KP 1.14 ! LA 1.00 MK 0.97 NL 1.14 OV 1.14 ! PT 1.09 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.06 KP 0.97 ! LA 0.97 MK 1.06 NL 1.02 OV 1.02 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.77 KP 0.69 ! LA 0.56 MK 0.92 NL 1.00* OV 1.00* ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.137349Jy sigma=0.000687 ! Fit after self-cal, rms=0.120743Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=8.189 mas, bpa=-2.977 degrees ! Estimated noise=588.456 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349518 Jy ! Component: 100 - total flux cleaned = 0.00423995 Jy ! Component: 150 - total flux cleaned = 0.00448235 Jy ! Component: 200 - total flux cleaned = 0.00469329 Jy ! Total flux subtracted in 200 components = 0.00469329 Jy ! Clean residual min=-0.002362 max=0.001994 Jy/beam ! Clean residual mean=0.000004 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0974384 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 0.0974384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120547Jy sigma=0.000680 ! Fit after self-cal, rms=0.120501Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120501Jy sigma=0.000679 ! Fit after self-cal, rms=0.108712Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.097 mas, bpa=-2.686 degrees ! Estimated noise=585.651 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230115 Jy ! Component: 100 - total flux cleaned = 0.00316821 Jy ! Component: 150 - total flux cleaned = 0.0033487 Jy ! Component: 200 - total flux cleaned = 0.00335118 Jy ! Total flux subtracted in 200 components = 0.00335118 Jy ! Clean residual min=-0.002184 max=0.001588 Jy/beam ! Clean residual mean=0.000005 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.10079 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 108 components and 0.10079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108628Jy sigma=0.000676 ! Fit after self-cal, rms=0.108549Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102239 Jy ! Component: 100 - total flux cleaned = 0.00102834 Jy ! Component: 150 - total flux cleaned = 0.000950218 Jy ! Component: 200 - total flux cleaned = 0.000880619 Jy ! Total flux subtracted in 200 components = 0.000880619 Jy ! Clean residual min=-0.002201 max=0.001605 Jy/beam ! Clean residual mean=0.000006 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.10167 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 119 components and 0.10167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108515Jy sigma=0.000676 ! Fit after self-cal, rms=0.108507Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108507Jy sigma=0.000676 ! Fit after self-cal, rms=0.107159Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=8.051 mas, bpa=-2.669 degrees ! Estimated noise=587.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131294 Jy ! Component: 100 - total flux cleaned = 0.0016382 Jy ! Component: 150 - total flux cleaned = 0.00161695 Jy ! Component: 200 - total flux cleaned = 0.00159674 Jy ! Total flux subtracted in 200 components = 0.00159674 Jy ! Clean residual min=-0.001764 max=0.001430 Jy/beam ! Clean residual mean=0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.103267 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 130 components and 0.103267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107128Jy sigma=0.000673 ! Fit after self-cal, rms=0.107170Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455306 Jy ! Component: 100 - total flux cleaned = 0.000389675 Jy ! Component: 150 - total flux cleaned = 0.000331225 Jy ! Component: 200 - total flux cleaned = 0.00027978 Jy ! Total flux subtracted in 200 components = 0.00027978 Jy ! Clean residual min=-0.001826 max=0.001424 Jy/beam ! Clean residual mean=0.000002 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.103547 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 135 components and 0.103547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107155Jy sigma=0.000672 ! Fit after self-cal, rms=0.107153Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107153Jy sigma=0.000672 ! Fit after self-cal, rms=0.108291Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.543 mas, bmaj=13.75 mas, bpa=-2.691 degrees ! Estimated noise=762.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136419 Jy ! Component: 100 - total flux cleaned = 0.0018662 Jy ! Component: 150 - total flux cleaned = 0.00197849 Jy ! Component: 200 - total flux cleaned = 0.00199332 Jy ! Total flux subtracted in 200 components = 0.00199332 Jy ! Clean residual min=-0.002015 max=0.001630 Jy/beam ! Clean residual mean=0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.10554 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 147 components and 0.10554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108267Jy sigma=0.000672 ! Fit after self-cal, rms=0.108344Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121392 Jy ! Component: 100 - total flux cleaned = 3.63935e-05 Jy ! Component: 150 - total flux cleaned = -2.12786e-05 Jy ! Component: 200 - total flux cleaned = -7.29267e-05 Jy ! Total flux subtracted in 200 components = -7.29267e-05 Jy ! Clean residual min=-0.001888 max=0.001591 Jy/beam ! Clean residual mean=0.000003 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.105467 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 155 components and 0.105467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108337Jy sigma=0.000672 ! Fit after self-cal, rms=0.108327Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.029 mas, bpa=-2.673 degrees ! Estimated noise=589.863 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.232 x 8.029 at -2.673 degrees (North through East) ! Clean map min=-0.0022136 max=0.064772 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=6.78 mas, bpa=-4.16 degrees ! Estimated noise=1040.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0494423 Jy ! Component: 100 - total flux cleaned = 0.0676685 Jy ! Component: 150 - total flux cleaned = 0.077374 Jy ! Component: 200 - total flux cleaned = 0.083992 Jy ! Total flux subtracted in 200 components = 0.083992 Jy ! Clean residual min=-0.003081 max=0.003693 Jy/beam ! Clean residual mean=0.000002 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.0839919 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0839919 Jy ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.029 mas, bpa=-2.673 degrees ! Estimated noise=589.863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00770912 Jy ! Component: 100 - total flux cleaned = 0.0124017 Jy ! Component: 150 - total flux cleaned = 0.0156898 Jy ! Component: 200 - total flux cleaned = 0.0178736 Jy ! Total flux subtracted in 200 components = 0.0178736 Jy ! Clean residual min=-0.002008 max=0.002107 Jy/beam ! Clean residual mean=0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.101866 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 65 components and 0.101865 Jy ! Inverting map ! Added new window around map position (-39.5, 41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117998 Jy ! Component: 100 - total flux cleaned = 0.00168797 Jy ! Component: 150 - total flux cleaned = 0.00201438 Jy ! Component: 200 - total flux cleaned = 0.00211091 Jy ! Total flux subtracted in 200 components = 0.00211091 Jy ! Clean residual min=-0.001856 max=0.001540 Jy/beam ! Clean residual mean=0.000002 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.103976 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 88 components and 0.103976 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.543 mas, bmaj=13.75 mas, bpa=-2.691 degrees ! Estimated noise=762.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936176 Jy ! Component: 100 - total flux cleaned = 0.000988215 Jy ! Component: 150 - total flux cleaned = 0.00102752 Jy ! Component: 200 - total flux cleaned = 0.0010283 Jy ! Total flux subtracted in 200 components = 0.0010283 Jy ! Clean residual min=-0.001894 max=0.001586 Jy/beam ! Clean residual mean=0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.105005 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.48162e-05 Jy ! Component: 100 - total flux cleaned = -4.54597e-05 Jy ! Component: 150 - total flux cleaned = -4.51569e-05 Jy ! Component: 200 - total flux cleaned = -7.85806e-05 Jy ! Total flux subtracted in 200 components = -7.85806e-05 Jy ! Clean residual min=-0.001870 max=0.001568 Jy/beam ! Clean residual mean=0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.104926 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 131 components and 0.104926 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.029 mas, bpa=-2.673 degrees ! Estimated noise=589.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250629 Jy ! Component: 100 - total flux cleaned = -0.000283472 Jy ! Component: 150 - total flux cleaned = -0.000312934 Jy ! Component: 200 - total flux cleaned = -0.000365016 Jy ! Total flux subtracted in 200 components = -0.000365016 Jy ! Clean residual min=-0.001634 max=0.001300 Jy/beam ! Clean residual mean=0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.104561 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 158 components and 0.104561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108330Jy sigma=0.000672 ! Fit after self-cal, rms=0.108337Jy sigma=0.000672 wmodel J1011-0423_S_2017_05_31_pus_map.mod ! Writing 158 model components to file: J1011-0423_S_2017_05_31_pus_map.mod wobs J1011-0423_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1011-0423_S_2017_05_31_pus_uvs.fits wwins J1011-0423_S_2017_05_31_pus_map.win ! wwins: Wrote 4 windows to J1011-0423_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000713814 Jy ! Component: 100 - total flux cleaned = -0.00125601 Jy ! Component: 150 - total flux cleaned = -0.00147309 Jy ! Component: 200 - total flux cleaned = -0.00147321 Jy ! Component: 250 - total flux cleaned = -0.00160706 Jy ! Component: 300 - total flux cleaned = -0.00160688 Jy ! Component: 350 - total flux cleaned = -0.00160675 Jy ! Component: 400 - total flux cleaned = -0.00152408 Jy ! Component: 450 - total flux cleaned = -0.0015241 Jy ! Component: 500 - total flux cleaned = -0.00150416 Jy ! Component: 550 - total flux cleaned = -0.00146557 Jy ! Component: 600 - total flux cleaned = -0.00142742 Jy ! Component: 650 - total flux cleaned = -0.0013329 Jy ! Component: 700 - total flux cleaned = -0.00125831 Jy ! Component: 750 - total flux cleaned = -0.00116609 Jy ! Component: 800 - total flux cleaned = -0.00107548 Jy ! Component: 850 - total flux cleaned = -0.00105755 Jy ! Component: 900 - total flux cleaned = -0.00103961 Jy ! Component: 950 - total flux cleaned = -0.00095221 Jy ! Component: 1000 - total flux cleaned = -0.000952303 Jy ! Component: 1050 - total flux cleaned = -0.000935669 Jy ! Component: 1100 - total flux cleaned = -0.000919061 Jy ! Component: 1150 - total flux cleaned = -0.000952516 Jy ! Component: 1200 - total flux cleaned = -0.00091971 Jy ! Component: 1250 - total flux cleaned = -0.000951953 Jy ! Component: 1300 - total flux cleaned = -0.000919781 Jy ! Component: 1350 - total flux cleaned = -0.000872673 Jy ! Component: 1400 - total flux cleaned = -0.000919617 Jy ! Component: 1450 - total flux cleaned = -0.000842239 Jy ! Component: 1500 - total flux cleaned = -0.000857829 Jy ! Component: 1550 - total flux cleaned = -0.000827496 Jy ! Component: 1600 - total flux cleaned = -0.000842647 Jy ! Component: 1650 - total flux cleaned = -0.00081272 Jy ! Component: 1700 - total flux cleaned = -0.000753606 Jy ! Component: 1750 - total flux cleaned = -0.000768236 Jy ! Component: 1800 - total flux cleaned = -0.000696243 Jy ! Component: 1850 - total flux cleaned = -0.000724892 Jy ! Component: 1900 - total flux cleaned = -0.000767436 Jy ! Component: 1950 - total flux cleaned = -0.000781411 Jy ! Component: 2000 - total flux cleaned = -0.000809204 Jy ! Component: 2050 - total flux cleaned = -0.000836788 Jy ! Component: 2100 - total flux cleaned = -0.000823114 Jy ! Component: 2150 - total flux cleaned = -0.000836685 Jy ! Component: 2200 - total flux cleaned = -0.00085 Jy ! Component: 2250 - total flux cleaned = -0.000823334 Jy ! Component: 2300 - total flux cleaned = -0.000876287 Jy ! Component: 2350 - total flux cleaned = -0.000863176 Jy ! Component: 2400 - total flux cleaned = -0.00087625 Jy ! Component: 2450 - total flux cleaned = -0.000902132 Jy ! Component: 2500 - total flux cleaned = -0.000902079 Jy ! Component: 2550 - total flux cleaned = -0.000902101 Jy ! Component: 2600 - total flux cleaned = -0.00092723 Jy ! Component: 2650 - total flux cleaned = -0.000927121 Jy ! Component: 2700 - total flux cleaned = -0.000852716 Jy ! Component: 2750 - total flux cleaned = -0.000938945 Jy ! Component: 2800 - total flux cleaned = -0.000914358 Jy ! Component: 2850 - total flux cleaned = -0.000914537 Jy ! Component: 2900 - total flux cleaned = -0.000962594 Jy ! Component: 2950 - total flux cleaned = -0.000974395 Jy ! Component: 3000 - total flux cleaned = -0.0009744 Jy ! Component: 3050 - total flux cleaned = -0.000915659 Jy ! Component: 3100 - total flux cleaned = -0.000939034 Jy ! Component: 3150 - total flux cleaned = -0.000939128 Jy ! Component: 3200 - total flux cleaned = -0.000962102 Jy ! Component: 3250 - total flux cleaned = -0.000996225 Jy ! Component: 3300 - total flux cleaned = -0.00100759 Jy ! Component: 3350 - total flux cleaned = -0.00100761 Jy ! Component: 3400 - total flux cleaned = -0.000996427 Jy ! Component: 3450 - total flux cleaned = -0.00105223 Jy ! Component: 3500 - total flux cleaned = -0.00111844 Jy ! Component: 3550 - total flux cleaned = -0.00109641 Jy ! Component: 3600 - total flux cleaned = -0.00112923 Jy ! Component: 3650 - total flux cleaned = -0.00111853 Jy ! Component: 3700 - total flux cleaned = -0.00118314 Jy ! Component: 3750 - total flux cleaned = -0.00122589 Jy ! Component: 3800 - total flux cleaned = -0.00120465 Jy ! Component: 3850 - total flux cleaned = -0.00121535 Jy ! Component: 3900 - total flux cleaned = -0.00125732 Jy ! Component: 3950 - total flux cleaned = -0.00125739 Jy ! Component: 4000 - total flux cleaned = -0.00136119 Jy ! Component: 4050 - total flux cleaned = -0.00138175 Jy ! Total flux subtracted in 4096 components = -0.00138174 Jy ! Clean residual min=-0.000775 max=0.000666 Jy/beam ! Clean residual mean=0.000001 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.103179 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 450 components and 0.103179 Jy ![Exited script file: muppet] wmap "J1011-0423_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.232 x 8.029 at -2.673 degrees (North through East) ! Clean map min=-0.0014742 max=0.064322 Jy/beam ! Writing clean map to FITS file: J1011-0423_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0643223 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192524 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.897935 0.897935 1.79587 3.59174 7.18348 14.367 28.7339 57.4679 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.232 x 8.029 at -2.673 degrees (North through East) ! Clean map min=-0.0014742 max=0.064322 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1011-0423_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:45:36 2019