! Started logfile: J1009+0622_S_2017_07_09_pus_uvs.log on Wed May 8 14:46:55 2019 obs J1009+0622_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1009+0622_S_2017_07_09_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.941396 visibilities/baseline/integration-bin. ! Found source: J1009+0622 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 19148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1009+0622_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 637 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.835006Jy sigma=0.007722 ! Fit after self-cal, rms=0.809331Jy sigma=0.007510 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=6.913 mas, bpa=-3.931 degrees ! Estimated noise=974.428 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141896 Jy ! Component: 100 - total flux cleaned = 0.17479 Jy ! Total flux subtracted in 100 components = 0.17479 Jy ! Clean residual min=-0.008657 max=0.015230 Jy/beam ! Clean residual mean=0.000004 rms=0.002132 Jy/beam ! Combined flux in latest and established models = 0.17479 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.17479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086575Jy sigma=0.000760 ! Fit after self-cal, rms=0.086574Jy sigma=0.000760 ! Inverting map ! Added new window around map position (21, -45.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156647 Jy ! Component: 100 - total flux cleaned = 0.0236905 Jy ! Total flux subtracted in 100 components = 0.0236905 Jy ! Clean residual min=-0.006396 max=0.013506 Jy/beam ! Clean residual mean=0.000003 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.198481 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.198481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082926Jy sigma=0.000725 ! Fit after self-cal, rms=0.082798Jy sigma=0.000723 ! Inverting map ! Added new window around map position (-21, 45.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102734 Jy ! Component: 100 - total flux cleaned = 0.0140258 Jy ! Total flux subtracted in 100 components = 0.0140258 Jy ! Clean residual min=-0.006748 max=0.007247 Jy/beam ! Clean residual mean=0.000003 rms=0.001666 Jy/beam ! Combined flux in latest and established models = 0.212506 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.212506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081784Jy sigma=0.000714 ! Fit after self-cal, rms=0.081741Jy sigma=0.000714 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=8.048 mas, bpa=-3.369 degrees ! Estimated noise=654.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00850895 Jy ! Component: 100 - total flux cleaned = 0.0135041 Jy ! Component: 150 - total flux cleaned = 0.0149509 Jy ! Component: 200 - total flux cleaned = 0.0159075 Jy ! Total flux subtracted in 200 components = 0.0159075 Jy ! Clean residual min=-0.004160 max=0.004019 Jy/beam ! Clean residual mean=0.000004 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.228414 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 67 components and 0.228414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080699Jy sigma=0.000704 ! Fit after self-cal, rms=0.080651Jy sigma=0.000704 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.94 HN 0.96 KP 0.99 ! LA 1.01 MK 1.15 NL 0.94 OV 1.02 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.96 KP 0.96 ! LA 0.96 MK 0.99 NL 1.08 OV 1.04 ! PT 0.99 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.96 KP 0.96 ! LA 0.98 MK 1.07 NL 1.03 OV 0.95 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.89 KP 1.00* ! LA 0.97 MK 1.02 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.080651Jy sigma=0.000704 ! Fit after self-cal, rms=0.079527Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=8.096 mas, bpa=-3.101 degrees ! Estimated noise=652.932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000793845 Jy ! Component: 100 - total flux cleaned = -0.00143913 Jy ! Component: 150 - total flux cleaned = -0.00216384 Jy ! Component: 200 - total flux cleaned = -0.00248813 Jy ! Total flux subtracted in 200 components = -0.00248813 Jy ! Clean residual min=-0.003347 max=0.003482 Jy/beam ! Clean residual mean=0.000000 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.225926 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 88 components and 0.225926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079270Jy sigma=0.000691 ! Fit after self-cal, rms=0.079263Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079263Jy sigma=0.000691 ! Fit after self-cal, rms=0.078928Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=8.106 mas, bpa=-3.22 degrees ! Estimated noise=654.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000954342 Jy ! Component: 100 - total flux cleaned = 0.000701193 Jy ! Component: 150 - total flux cleaned = 0.000565127 Jy ! Component: 200 - total flux cleaned = 0.000561947 Jy ! Total flux subtracted in 200 components = 0.000561947 Jy ! Clean residual min=-0.002762 max=0.002918 Jy/beam ! Clean residual mean=0.000003 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.226488 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 0.226488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078774Jy sigma=0.000675 ! Fit after self-cal, rms=0.078791Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026484 Jy ! Component: 100 - total flux cleaned = 0.000150776 Jy ! Component: 150 - total flux cleaned = 4.47992e-05 Jy ! Component: 200 - total flux cleaned = -0.000148135 Jy ! Total flux subtracted in 200 components = -0.000148135 Jy ! Clean residual min=-0.002694 max=0.002815 Jy/beam ! Clean residual mean=0.000003 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.22634 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 123 components and 0.226339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078721Jy sigma=0.000674 ! Fit after self-cal, rms=0.078718Jy sigma=0.000674 ! Inverting map ! Added new window around map position (-30, -65). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801968 Jy ! Component: 100 - total flux cleaned = 0.000923034 Jy ! Component: 150 - total flux cleaned = 0.00108624 Jy ! Component: 200 - total flux cleaned = 0.000987397 Jy ! Total flux subtracted in 200 components = 0.000987397 Jy ! Clean residual min=-0.002507 max=0.002275 Jy/beam ! Clean residual mean=0.000004 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.227327 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 147 components and 0.227327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078601Jy sigma=0.000673 ! Fit after self-cal, rms=0.078600Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078600Jy sigma=0.000673 ! Fit after self-cal, rms=0.079089Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=8.109 mas, bpa=-3.218 degrees ! Estimated noise=653.773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00212548 Jy ! Component: 100 - total flux cleaned = -0.0022509 Jy ! Component: 150 - total flux cleaned = -0.00209771 Jy ! Component: 200 - total flux cleaned = -0.00195677 Jy ! Total flux subtracted in 200 components = -0.00195677 Jy ! Clean residual min=-0.002014 max=0.001711 Jy/beam ! Clean residual mean=0.000002 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.22537 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 164 components and 0.22537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078996Jy sigma=0.000667 ! Fit after self-cal, rms=0.079001Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.08409e-05 Jy ! Component: 100 - total flux cleaned = 0.000248714 Jy ! Component: 150 - total flux cleaned = 0.000443534 Jy ! Component: 200 - total flux cleaned = 0.000552715 Jy ! Total flux subtracted in 200 components = 0.000552715 Jy ! Clean residual min=-0.001958 max=0.001627 Jy/beam ! Clean residual mean=0.000002 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.225923 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 176 components and 0.225923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078962Jy sigma=0.000667 ! Fit after self-cal, rms=0.078962Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078962Jy sigma=0.000667 ! Fit after self-cal, rms=0.079114Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.395 mas, bmaj=12.74 mas, bpa=-6.656 degrees ! Estimated noise=810.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000651339 Jy ! Component: 100 - total flux cleaned = -0.000960003 Jy ! Component: 150 - total flux cleaned = -0.000994844 Jy ! Component: 200 - total flux cleaned = -0.000995495 Jy ! Total flux subtracted in 200 components = -0.000995495 Jy ! Clean residual min=-0.001919 max=0.001920 Jy/beam ! Clean residual mean=0.000003 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.224927 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 185 components and 0.224927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079080Jy sigma=0.000666 ! Fit after self-cal, rms=0.079080Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.70205e-05 Jy ! Component: 100 - total flux cleaned = 1.30685e-05 Jy ! Component: 150 - total flux cleaned = 1.31872e-05 Jy ! Component: 200 - total flux cleaned = 1.39501e-05 Jy ! Total flux subtracted in 200 components = 1.39501e-05 Jy ! Clean residual min=-0.001886 max=0.001926 Jy/beam ! Clean residual mean=0.000003 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.224941 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 200 components and 0.224941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079072Jy sigma=0.000666 ! Fit after self-cal, rms=0.079072Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=8.111 mas, bpa=-3.2 degrees ! Estimated noise=652.518 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 8.111 at -3.2 degrees (North through East) ! Clean map min=-0.0020098 max=0.18739 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=6.983 mas, bpa=-3.765 degrees ! Estimated noise=1000.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145572 Jy ! Component: 100 - total flux cleaned = 0.178416 Jy ! Component: 150 - total flux cleaned = 0.192223 Jy ! Component: 200 - total flux cleaned = 0.200498 Jy ! Total flux subtracted in 200 components = 0.200498 Jy ! Clean residual min=-0.004165 max=0.004555 Jy/beam ! Clean residual mean=0.000003 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.200498 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.200498 Jy ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=8.111 mas, bpa=-3.2 degrees ! Estimated noise=652.518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789785 Jy ! Component: 100 - total flux cleaned = 0.0124917 Jy ! Component: 150 - total flux cleaned = 0.0158551 Jy ! Component: 200 - total flux cleaned = 0.0183505 Jy ! Total flux subtracted in 200 components = 0.0183505 Jy ! Clean residual min=-0.002048 max=0.002902 Jy/beam ! Clean residual mean=0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.218848 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 38 components and 0.218848 Jy ! Inverting map ! Added new window around map position (12.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251833 Jy ! Component: 100 - total flux cleaned = 0.00395387 Jy ! Component: 150 - total flux cleaned = 0.00484841 Jy ! Component: 200 - total flux cleaned = 0.00541774 Jy ! Total flux subtracted in 200 components = 0.00541774 Jy ! Clean residual min=-0.001899 max=0.001654 Jy/beam ! Clean residual mean=0.000002 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.224266 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 73 components and 0.224266 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.395 mas, bmaj=12.74 mas, bpa=-6.656 degrees ! Estimated noise=810.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000862036 Jy ! Component: 100 - total flux cleaned = 0.00138731 Jy ! Component: 150 - total flux cleaned = 0.00168506 Jy ! Component: 200 - total flux cleaned = 0.00195199 Jy ! Total flux subtracted in 200 components = 0.00195199 Jy ! Clean residual min=-0.001964 max=0.002174 Jy/beam ! Clean residual mean=0.000002 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.226218 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243689 Jy ! Component: 100 - total flux cleaned = 0.000383379 Jy ! Component: 150 - total flux cleaned = 0.000513128 Jy ! Component: 200 - total flux cleaned = 0.000656851 Jy ! Total flux subtracted in 200 components = 0.000656851 Jy ! Clean residual min=-0.001916 max=0.002142 Jy/beam ! Clean residual mean=0.000002 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.226875 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 145 components and 0.226875 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=8.111 mas, bpa=-3.2 degrees ! Estimated noise=652.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.28824e-06 Jy ! Component: 100 - total flux cleaned = 0.000131365 Jy ! Component: 150 - total flux cleaned = 0.000168682 Jy ! Component: 200 - total flux cleaned = 0.000135248 Jy ! Total flux subtracted in 200 components = 0.000135248 Jy ! Clean residual min=-0.001825 max=0.001608 Jy/beam ! Clean residual mean=0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.22701 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 166 components and 0.22701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079091Jy sigma=0.000666 ! Fit after self-cal, rms=0.079068Jy sigma=0.000666 wmodel J1009+0622_S_2017_07_09_pus_map.mod ! Writing 166 model components to file: J1009+0622_S_2017_07_09_pus_map.mod wobs J1009+0622_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1009+0622_S_2017_07_09_pus_uvs.fits wwins J1009+0622_S_2017_07_09_pus_map.win ! wwins: Wrote 6 windows to J1009+0622_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000115542 Jy ! Component: 100 - total flux cleaned = 7.70636e-05 Jy ! Component: 150 - total flux cleaned = 0.00015499 Jy ! Component: 200 - total flux cleaned = 0.000256578 Jy ! Component: 250 - total flux cleaned = 0.000402794 Jy ! Component: 300 - total flux cleaned = 0.000472599 Jy ! Component: 350 - total flux cleaned = 0.000472547 Jy ! Component: 400 - total flux cleaned = 0.000494972 Jy ! Component: 450 - total flux cleaned = 0.000516736 Jy ! Component: 500 - total flux cleaned = 0.000431216 Jy ! Component: 550 - total flux cleaned = 0.000410088 Jy ! Component: 600 - total flux cleaned = 0.000306904 Jy ! Component: 650 - total flux cleaned = 0.000266389 Jy ! Component: 700 - total flux cleaned = 0.000246147 Jy ! Component: 750 - total flux cleaned = 0.000245842 Jy ! Component: 800 - total flux cleaned = 0.000284052 Jy ! Component: 850 - total flux cleaned = 0.00024557 Jy ! Component: 900 - total flux cleaned = 0.000264342 Jy ! Component: 950 - total flux cleaned = 0.000264305 Jy ! Component: 1000 - total flux cleaned = 0.000282906 Jy ! Component: 1050 - total flux cleaned = 0.000318995 Jy ! Component: 1100 - total flux cleaned = 0.000408772 Jy ! Component: 1150 - total flux cleaned = 0.000391154 Jy ! Component: 1200 - total flux cleaned = 0.000478779 Jy ! Component: 1250 - total flux cleaned = 0.000530757 Jy ! Component: 1300 - total flux cleaned = 0.00063337 Jy ! Component: 1350 - total flux cleaned = 0.000632915 Jy ! Component: 1400 - total flux cleaned = 0.000683175 Jy ! Component: 1450 - total flux cleaned = 0.000749387 Jy ! Component: 1500 - total flux cleaned = 0.00079824 Jy ! Component: 1550 - total flux cleaned = 0.000830578 Jy ! Component: 1600 - total flux cleaned = 0.000863005 Jy ! Component: 1650 - total flux cleaned = 0.000958734 Jy ! Component: 1700 - total flux cleaned = 0.0009747 Jy ! Component: 1750 - total flux cleaned = 0.00105299 Jy ! Component: 1800 - total flux cleaned = 0.00114582 Jy ! Component: 1850 - total flux cleaned = 0.001115 Jy ! Component: 1900 - total flux cleaned = 0.00123701 Jy ! Component: 1950 - total flux cleaned = 0.00129728 Jy ! Component: 2000 - total flux cleaned = 0.00135709 Jy ! Component: 2050 - total flux cleaned = 0.00140153 Jy ! Component: 2100 - total flux cleaned = 0.00144559 Jy ! Component: 2150 - total flux cleaned = 0.00151847 Jy ! Component: 2200 - total flux cleaned = 0.00160537 Jy ! Component: 2250 - total flux cleaned = 0.00167715 Jy ! Component: 2300 - total flux cleaned = 0.00170558 Jy ! Component: 2350 - total flux cleaned = 0.00179033 Jy ! Component: 2400 - total flux cleaned = 0.00187461 Jy ! Component: 2450 - total flux cleaned = 0.0019164 Jy ! Component: 2500 - total flux cleaned = 0.00198558 Jy ! Component: 2550 - total flux cleaned = 0.00209549 Jy ! Component: 2600 - total flux cleaned = 0.00212286 Jy ! Component: 2650 - total flux cleaned = 0.00219043 Jy ! Component: 2700 - total flux cleaned = 0.00225739 Jy ! Component: 2750 - total flux cleaned = 0.0023107 Jy ! Component: 2800 - total flux cleaned = 0.00235034 Jy ! Component: 2850 - total flux cleaned = 0.00245533 Jy ! Component: 2900 - total flux cleaned = 0.00249447 Jy ! Component: 2950 - total flux cleaned = 0.00257211 Jy ! Component: 3000 - total flux cleaned = 0.00263647 Jy ! Component: 3050 - total flux cleaned = 0.00266206 Jy ! Component: 3100 - total flux cleaned = 0.00272545 Jy ! Component: 3150 - total flux cleaned = 0.00273811 Jy ! Component: 3200 - total flux cleaned = 0.00281338 Jy ! Component: 3250 - total flux cleaned = 0.00291306 Jy ! Component: 3300 - total flux cleaned = 0.0029873 Jy ! Component: 3350 - total flux cleaned = 0.00298723 Jy ! Component: 3400 - total flux cleaned = 0.00308501 Jy ! Component: 3450 - total flux cleaned = 0.00314562 Jy ! Component: 3500 - total flux cleaned = 0.00314572 Jy ! Component: 3550 - total flux cleaned = 0.00324174 Jy ! Component: 3600 - total flux cleaned = 0.00324176 Jy ! Component: 3650 - total flux cleaned = 0.00334834 Jy ! Component: 3700 - total flux cleaned = 0.00332481 Jy ! Component: 3750 - total flux cleaned = 0.0033834 Jy ! Component: 3800 - total flux cleaned = 0.00348801 Jy ! Component: 3850 - total flux cleaned = 0.00349953 Jy ! Component: 3900 - total flux cleaned = 0.00355695 Jy ! Component: 3950 - total flux cleaned = 0.00356839 Jy ! Component: 4000 - total flux cleaned = 0.00362511 Jy ! Component: 4050 - total flux cleaned = 0.00364766 Jy ! Total flux subtracted in 4096 components = 0.00365879 Jy ! Clean residual min=-0.000592 max=0.000717 Jy/beam ! Clean residual mean=0.000001 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.230669 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 472 components and 0.230669 Jy ![Exited script file: muppet] wmap "J1009+0622_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 8.111 at -3.2 degrees (North through East) ! Clean map min=-0.0012221 max=0.18942 Jy/beam ! Writing clean map to FITS file: J1009+0622_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.189425 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207626 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.328826 0.328826 0.657651 1.3153 2.6306 5.26121 10.5224 21.0448 42.0897 84.1794 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.189 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 8.111 at -3.2 degrees (North through East) ! Clean map min=-0.0012221 max=0.18942 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1009+0622_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:47:00 2019