! Started logfile: J1008-1629_S_2017_10_09_pus_uvs.log on Sun May 12 13:09:42 2019 obs J1008-1629_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1008-1629_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.706763 visibilities/baseline/integration-bin. ! Found source: J1008-1629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1008-1629_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 758 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958150Jy sigma=0.007404 ! Fit after self-cal, rms=0.933062Jy sigma=0.007217 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=11.57 mas, bpa=-19.84 degrees ! Estimated noise=1609.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520326 Jy ! Component: 100 - total flux cleaned = 0.0643236 Jy ! Total flux subtracted in 100 components = 0.0643236 Jy ! Clean residual min=-0.005848 max=0.007279 Jy/beam ! Clean residual mean=-0.000069 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.0643236 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0643236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095784Jy sigma=0.000680 ! Fit after self-cal, rms=0.095511Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=14.03 mas, bpa=-19 degrees ! Estimated noise=1004.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010085 Jy ! Component: 100 - total flux cleaned = 0.0167161 Jy ! Component: 150 - total flux cleaned = 0.0214008 Jy ! Component: 200 - total flux cleaned = 0.0247247 Jy ! Total flux subtracted in 200 components = 0.0247247 Jy ! Clean residual min=-0.005401 max=0.008628 Jy/beam ! Clean residual mean=-0.000064 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.0890484 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 72 components and 0.0890484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094239Jy sigma=0.000668 ! Fit after self-cal, rms=0.094166Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.93 KP 1.22 ! LA 0.84 MK 1.05 NL 1.08 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.53 FD 0.95 HN 0.97 KP 1.10 ! LA 0.88 MK 1.07 NL 1.12 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.02 KP 1.08 ! LA 0.71 MK 1.10 NL 1.20 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.03 KP 1.00* ! LA 1.00* MK 1.07 NL 1.00* OV 1.00* ! PT 0.84 ! ! ! Fit before self-cal, rms=0.094166Jy sigma=0.000667 ! Fit after self-cal, rms=0.094658Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=14.43 mas, bpa=-19.14 degrees ! Estimated noise=1014.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (28, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608512 Jy ! Component: 100 - total flux cleaned = 0.00869712 Jy ! Component: 150 - total flux cleaned = 0.00989498 Jy ! Component: 200 - total flux cleaned = 0.0107264 Jy ! Total flux subtracted in 200 components = 0.0107264 Jy ! Clean residual min=-0.004626 max=0.003660 Jy/beam ! Clean residual mean=-0.000033 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.0997748 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 114 components and 0.0997748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094241Jy sigma=0.000660 ! Fit after self-cal, rms=0.094376Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094376Jy sigma=0.000658 ! Fit after self-cal, rms=0.093958Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=14.5 mas, bpa=-19.37 degrees ! Estimated noise=1011.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304069 Jy ! Component: 100 - total flux cleaned = 0.00412135 Jy ! Component: 150 - total flux cleaned = 0.00443269 Jy ! Component: 200 - total flux cleaned = 0.0043795 Jy ! Total flux subtracted in 200 components = 0.0043795 Jy ! Clean residual min=-0.004154 max=0.003451 Jy/beam ! Clean residual mean=-0.000011 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.104154 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 135 components and 0.104154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093819Jy sigma=0.000655 ! Fit after self-cal, rms=0.093795Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178416 Jy ! Component: 100 - total flux cleaned = 0.00202221 Jy ! Component: 150 - total flux cleaned = 0.00197344 Jy ! Component: 200 - total flux cleaned = 0.00197194 Jy ! Total flux subtracted in 200 components = 0.00197194 Jy ! Clean residual min=-0.003996 max=0.003338 Jy/beam ! Clean residual mean=-0.000013 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.106126 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 144 components and 0.106126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093723Jy sigma=0.000654 ! Fit after self-cal, rms=0.093691Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093691Jy sigma=0.000654 ! Fit after self-cal, rms=0.093301Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=14.51 mas, bpa=-19.46 degrees ! Estimated noise=1011.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169258 Jy ! Component: 100 - total flux cleaned = 0.00190684 Jy ! Component: 150 - total flux cleaned = 0.00186454 Jy ! Component: 200 - total flux cleaned = 0.00182551 Jy ! Total flux subtracted in 200 components = 0.00182551 Jy ! Clean residual min=-0.003923 max=0.003243 Jy/beam ! Clean residual mean=-0.000009 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.107952 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 164 components and 0.107952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093237Jy sigma=0.000654 ! Fit after self-cal, rms=0.093195Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000694078 Jy ! Component: 100 - total flux cleaned = 0.000607634 Jy ! Component: 150 - total flux cleaned = 0.000529219 Jy ! Component: 200 - total flux cleaned = 0.000456607 Jy ! Total flux subtracted in 200 components = 0.000456607 Jy ! Clean residual min=-0.003810 max=0.003184 Jy/beam ! Clean residual mean=-0.000010 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.108408 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 173 components and 0.108408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093157Jy sigma=0.000653 ! Fit after self-cal, rms=0.093137Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093137Jy sigma=0.000653 ! Fit after self-cal, rms=0.092947Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.261 mas, bmaj=19.15 mas, bpa=-13.46 degrees ! Estimated noise=1188.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137335 Jy ! Component: 100 - total flux cleaned = 0.00164842 Jy ! Component: 150 - total flux cleaned = 0.00152142 Jy ! Component: 200 - total flux cleaned = 0.00130752 Jy ! Total flux subtracted in 200 components = 0.00130752 Jy ! Clean residual min=-0.003207 max=0.002988 Jy/beam ! Clean residual mean=-0.000013 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.109716 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 182 components and 0.109716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092919Jy sigma=0.000653 ! Fit after self-cal, rms=0.092872Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071366 Jy ! Component: 100 - total flux cleaned = 0.000680457 Jy ! Component: 150 - total flux cleaned = 0.000551458 Jy ! Component: 200 - total flux cleaned = 0.000405292 Jy ! Total flux subtracted in 200 components = 0.000405292 Jy ! Clean residual min=-0.002965 max=0.002869 Jy/beam ! Clean residual mean=-0.000015 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.110121 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 191 components and 0.110121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092862Jy sigma=0.000653 ! Fit after self-cal, rms=0.092844Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=14.52 mas, bpa=-19.49 degrees ! Estimated noise=1012.05 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.484 x 14.52 at -19.49 degrees (North through East) ! Clean map min=-0.0033306 max=0.066444 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.757 mas, bmaj=11.99 mas, bpa=-20.08 degrees ! Estimated noise=1670.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524889 Jy ! Component: 100 - total flux cleaned = 0.0665472 Jy ! Component: 150 - total flux cleaned = 0.0743325 Jy ! Component: 200 - total flux cleaned = 0.0801194 Jy ! Total flux subtracted in 200 components = 0.0801194 Jy ! Clean residual min=-0.004996 max=0.005237 Jy/beam ! Clean residual mean=-0.000042 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.0801194 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.0801194 Jy ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=14.52 mas, bpa=-19.49 degrees ! Estimated noise=1012.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720595 Jy ! Component: 100 - total flux cleaned = 0.0121966 Jy ! Component: 150 - total flux cleaned = 0.0152247 Jy ! Component: 200 - total flux cleaned = 0.0176274 Jy ! Total flux subtracted in 200 components = 0.0176274 Jy ! Clean residual min=-0.004525 max=0.004568 Jy/beam ! Clean residual mean=-0.000035 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.0977468 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 76 components and 0.0977468 Jy ! Inverting map ! Added new window around map position (-46, 87). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383938 Jy ! Component: 100 - total flux cleaned = 0.005002 Jy ! Component: 150 - total flux cleaned = 0.0060798 Jy ! Component: 200 - total flux cleaned = 0.00686215 Jy ! Total flux subtracted in 200 components = 0.00686215 Jy ! Clean residual min=-0.003808 max=0.002771 Jy/beam ! Clean residual mean=-0.000020 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.104609 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 113 components and 0.104609 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.261 mas, bmaj=19.15 mas, bpa=-13.46 degrees ! Estimated noise=1188.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202245 Jy ! Component: 100 - total flux cleaned = 0.00291671 Jy ! Component: 150 - total flux cleaned = 0.00340666 Jy ! Component: 200 - total flux cleaned = 0.00362023 Jy ! Total flux subtracted in 200 components = 0.00362023 Jy ! Clean residual min=-0.003017 max=0.002612 Jy/beam ! Clean residual mean=-0.000018 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.108229 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.76151e-05 Jy ! Component: 100 - total flux cleaned = 0.000139468 Jy ! Component: 150 - total flux cleaned = 0.000140302 Jy ! Component: 200 - total flux cleaned = 6.8508e-05 Jy ! Total flux subtracted in 200 components = 6.8508e-05 Jy ! Clean residual min=-0.002784 max=0.002534 Jy/beam ! Clean residual mean=-0.000017 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.108298 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 160 components and 0.108298 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=14.52 mas, bpa=-19.49 degrees ! Estimated noise=1012.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000620491 Jy ! Component: 100 - total flux cleaned = -0.000681009 Jy ! Component: 150 - total flux cleaned = -0.000578299 Jy ! Component: 200 - total flux cleaned = -0.000488361 Jy ! Total flux subtracted in 200 components = -0.000488361 Jy ! Clean residual min=-0.003107 max=0.002540 Jy/beam ! Clean residual mean=-0.000011 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.107809 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 190 components and 0.107809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092781Jy sigma=0.000652 ! Fit after self-cal, rms=0.092728Jy sigma=0.000652 wmodel J1008-1629_S_2017_10_09_pus_map.mod ! Writing 190 model components to file: J1008-1629_S_2017_10_09_pus_map.mod wobs J1008-1629_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1008-1629_S_2017_10_09_pus_uvs.fits wwins J1008-1629_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J1008-1629_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000890405 Jy ! Component: 100 - total flux cleaned = -0.00120794 Jy ! Component: 150 - total flux cleaned = -0.00154768 Jy ! Component: 200 - total flux cleaned = -0.00174597 Jy ! Component: 250 - total flux cleaned = -0.00182149 Jy ! Component: 300 - total flux cleaned = -0.00174929 Jy ! Component: 350 - total flux cleaned = -0.00174988 Jy ! Component: 400 - total flux cleaned = -0.0015502 Jy ! Component: 450 - total flux cleaned = -0.00139027 Jy ! Component: 500 - total flux cleaned = -0.00126601 Jy ! Component: 550 - total flux cleaned = -0.00114614 Jy ! Component: 600 - total flux cleaned = -0.00100032 Jy ! Component: 650 - total flux cleaned = -0.000887763 Jy ! Component: 700 - total flux cleaned = -0.00072444 Jy ! Component: 750 - total flux cleaned = -0.000670796 Jy ! Component: 800 - total flux cleaned = -0.00051601 Jy ! Component: 850 - total flux cleaned = -0.000390442 Jy ! Component: 900 - total flux cleaned = -0.000267994 Jy ! Component: 950 - total flux cleaned = -0.000148771 Jy ! Component: 1000 - total flux cleaned = -3.30498e-05 Jy ! Component: 1050 - total flux cleaned = 7.99039e-05 Jy ! Component: 1100 - total flux cleaned = 0.000190107 Jy ! Component: 1150 - total flux cleaned = 0.000297608 Jy ! Component: 1200 - total flux cleaned = 0.00033933 Jy ! Component: 1250 - total flux cleaned = 0.000380576 Jy ! Component: 1300 - total flux cleaned = 0.000400301 Jy ! Component: 1350 - total flux cleaned = 0.000361307 Jy ! Component: 1400 - total flux cleaned = 0.000420319 Jy ! Component: 1450 - total flux cleaned = 0.000496561 Jy ! Component: 1500 - total flux cleaned = 0.000458577 Jy ! Component: 1550 - total flux cleaned = 0.000476841 Jy ! Component: 1600 - total flux cleaned = 0.00049445 Jy ! Component: 1650 - total flux cleaned = 0.000494657 Jy ! Component: 1700 - total flux cleaned = 0.000529449 Jy ! Component: 1750 - total flux cleaned = 0.00049485 Jy ! Component: 1800 - total flux cleaned = 0.000477818 Jy ! Component: 1850 - total flux cleaned = 0.000394713 Jy ! Component: 1900 - total flux cleaned = 0.000378112 Jy ! Component: 1950 - total flux cleaned = 0.000361751 Jy ! Component: 2000 - total flux cleaned = 0.000313731 Jy ! Component: 2050 - total flux cleaned = 0.000329557 Jy ! Component: 2100 - total flux cleaned = 0.000282447 Jy ! Component: 2150 - total flux cleaned = 0.000251556 Jy ! Component: 2200 - total flux cleaned = 0.000220793 Jy ! Component: 2250 - total flux cleaned = 0.000205656 Jy ! Component: 2300 - total flux cleaned = 0.000190863 Jy ! Component: 2350 - total flux cleaned = 0.000205592 Jy ! Component: 2400 - total flux cleaned = 0.000161798 Jy ! Component: 2450 - total flux cleaned = 0.000132909 Jy ! Component: 2500 - total flux cleaned = 0.00011868 Jy ! Component: 2550 - total flux cleaned = 0.00010469 Jy ! Component: 2600 - total flux cleaned = 0.000132713 Jy ! Component: 2650 - total flux cleaned = 0.00011891 Jy ! Component: 2700 - total flux cleaned = 7.79264e-05 Jy ! Component: 2750 - total flux cleaned = 9.13414e-05 Jy ! Component: 2800 - total flux cleaned = 7.79354e-05 Jy ! Component: 2850 - total flux cleaned = 6.45211e-05 Jy ! Component: 2900 - total flux cleaned = 3.80075e-05 Jy ! Component: 2950 - total flux cleaned = 2.47499e-05 Jy ! Component: 3000 - total flux cleaned = -1.3884e-05 Jy ! Component: 3050 - total flux cleaned = -1.38687e-05 Jy ! Component: 3100 - total flux cleaned = -1.37499e-05 Jy ! Component: 3150 - total flux cleaned = -3.88707e-05 Jy ! Component: 3200 - total flux cleaned = 1.10599e-05 Jy ! Component: 3250 - total flux cleaned = -2.59979e-05 Jy ! Component: 3300 - total flux cleaned = 3.54916e-05 Jy ! Component: 3350 - total flux cleaned = 4.76137e-05 Jy ! Component: 3400 - total flux cleaned = -7.66798e-07 Jy ! Component: 3450 - total flux cleaned = 2.33134e-05 Jy ! Component: 3500 - total flux cleaned = 3.52066e-05 Jy ! Component: 3550 - total flux cleaned = 3.51076e-05 Jy ! Component: 3600 - total flux cleaned = 2.33899e-05 Jy ! Component: 3650 - total flux cleaned = 6.99201e-05 Jy ! Component: 3700 - total flux cleaned = 4.68895e-05 Jy ! Component: 3750 - total flux cleaned = 9.28879e-05 Jy ! Component: 3800 - total flux cleaned = 8.15555e-05 Jy ! Component: 3850 - total flux cleaned = 8.15562e-05 Jy ! Component: 3900 - total flux cleaned = 8.15482e-05 Jy ! Component: 3950 - total flux cleaned = 0.000103956 Jy ! Component: 4000 - total flux cleaned = 9.28066e-05 Jy ! Component: 4050 - total flux cleaned = 8.1789e-05 Jy ! Total flux subtracted in 4096 components = 0.000103866 Jy ! Clean residual min=-0.000627 max=0.000584 Jy/beam ! Clean residual mean=0.000001 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.107913 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 451 components and 0.107913 Jy ![Exited script file: muppet] wmap "J1008-1629_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.484 x 14.52 at -19.49 degrees (North through East) ! Clean map min=-0.003095 max=0.067573 Jy/beam ! Writing clean map to FITS file: J1008-1629_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0675727 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000196161 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.87089 0.87089 1.74178 3.48356 6.96712 13.9342 27.8685 55.737 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.484 x 14.52 at -19.49 degrees (North through East) ! Clean map min=-0.003095 max=0.067573 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1008-1629_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:09:47 2019