! Started logfile: J1008-1629_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:38:28 2019 obs J1008-1629_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1008-1629_S_2017_03_27_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97037 visibilities/baseline/integration-bin. ! Found source: J1008-1629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 25152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1008-1629_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 503 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963210Jy sigma=0.007202 ! Fit after self-cal, rms=0.937246Jy sigma=0.007037 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=6.855 mas, bpa=-2.157 degrees ! Estimated noise=1039.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507395 Jy ! Component: 100 - total flux cleaned = 0.0621286 Jy ! Total flux subtracted in 100 components = 0.0621286 Jy ! Clean residual min=-0.004151 max=0.007972 Jy/beam ! Clean residual mean=-0.000022 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.0621286 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0621286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101062Jy sigma=0.000683 ! Fit after self-cal, rms=0.100814Jy sigma=0.000681 ! Inverting map ! Added new window around map position (27.5, 7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00700683 Jy ! Component: 100 - total flux cleaned = 0.011388 Jy ! Total flux subtracted in 100 components = 0.011388 Jy ! Clean residual min=-0.003402 max=0.005905 Jy/beam ! Clean residual mean=-0.000019 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.0735166 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.0735166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100131Jy sigma=0.000675 ! Fit after self-cal, rms=0.100056Jy sigma=0.000675 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=8.165 mas, bpa=-1.181 degrees ! Estimated noise=669.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00881407 Jy ! Component: 100 - total flux cleaned = 0.0147937 Jy ! Component: 150 - total flux cleaned = 0.019384 Jy ! Component: 200 - total flux cleaned = 0.023006 Jy ! Total flux subtracted in 200 components = 0.023006 Jy ! Clean residual min=-0.002628 max=0.003345 Jy/beam ! Clean residual mean=-0.000016 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.0965225 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 66 components and 0.0965226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099113Jy sigma=0.000666 ! Fit after self-cal, rms=0.098955Jy sigma=0.000665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.90 HN 0.97 KP 1.08 ! LA 0.91 MK 1.02 NL 0.97 OV 1.08 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.90 HN 1.21 KP 0.99 ! LA 0.92 MK 1.09 NL 1.00 OV 1.07 ! PT 0.92 SC 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.18 KP 1.01 ! LA 0.97 MK 1.09 NL 1.06 OV 0.99 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.94 KP 1.00* ! LA 0.82 MK 0.92 NL 1.00* OV 0.79 ! PT 0.95 SC 0.82 ! ! ! Fit before self-cal, rms=0.098955Jy sigma=0.000665 ! Fit after self-cal, rms=0.096351Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=8.366 mas, bpa=-1.06 degrees ! Estimated noise=658.239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339471 Jy ! Component: 100 - total flux cleaned = 0.00541114 Jy ! Component: 150 - total flux cleaned = 0.00613336 Jy ! Component: 200 - total flux cleaned = 0.00651958 Jy ! Total flux subtracted in 200 components = 0.00651958 Jy ! Clean residual min=-0.002111 max=0.002214 Jy/beam ! Clean residual mean=0.000007 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.103042 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 94 components and 0.103042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096217Jy sigma=0.000660 ! Fit after self-cal, rms=0.096277Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096277Jy sigma=0.000660 ! Fit after self-cal, rms=0.099678Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=8.411 mas, bpa=-1.307 degrees ! Estimated noise=668.525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219583 Jy ! Component: 100 - total flux cleaned = 0.00347401 Jy ! Component: 150 - total flux cleaned = 0.00373115 Jy ! Component: 200 - total flux cleaned = 0.00382313 Jy ! Total flux subtracted in 200 components = 0.00382313 Jy ! Clean residual min=-0.002072 max=0.001831 Jy/beam ! Clean residual mean=0.000004 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.106865 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 112 components and 0.106865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099623Jy sigma=0.000657 ! Fit after self-cal, rms=0.099708Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936828 Jy ! Component: 100 - total flux cleaned = 0.00127304 Jy ! Component: 150 - total flux cleaned = 0.00141036 Jy ! Component: 200 - total flux cleaned = 0.00148204 Jy ! Total flux subtracted in 200 components = 0.00148204 Jy ! Clean residual min=-0.002120 max=0.001749 Jy/beam ! Clean residual mean=0.000005 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.108347 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 0.108347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099686Jy sigma=0.000657 ! Fit after self-cal, rms=0.099675Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099675Jy sigma=0.000657 ! Fit after self-cal, rms=0.101209Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=8.399 mas, bpa=-1.294 degrees ! Estimated noise=665.579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116023 Jy ! Component: 100 - total flux cleaned = 0.00143622 Jy ! Component: 150 - total flux cleaned = 0.00153242 Jy ! Component: 200 - total flux cleaned = 0.00157448 Jy ! Total flux subtracted in 200 components = 0.00157448 Jy ! Clean residual min=-0.001830 max=0.001649 Jy/beam ! Clean residual mean=0.000002 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.109922 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 146 components and 0.109922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101190Jy sigma=0.000656 ! Fit after self-cal, rms=0.101239Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440122 Jy ! Component: 100 - total flux cleaned = 0.000595293 Jy ! Component: 150 - total flux cleaned = 0.000615797 Jy ! Component: 200 - total flux cleaned = 0.000616311 Jy ! Total flux subtracted in 200 components = 0.000616311 Jy ! Clean residual min=-0.001882 max=0.001605 Jy/beam ! Clean residual mean=0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.110538 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 158 components and 0.110538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101229Jy sigma=0.000656 ! Fit after self-cal, rms=0.101228Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101228Jy sigma=0.000656 ! Fit after self-cal, rms=0.101649Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.913 mas, bmaj=16 mas, bpa=2.911 degrees ! Estimated noise=795.165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000830292 Jy ! Component: 100 - total flux cleaned = 0.00100229 Jy ! Component: 150 - total flux cleaned = 0.000945081 Jy ! Component: 200 - total flux cleaned = 0.000893019 Jy ! Total flux subtracted in 200 components = 0.000893019 Jy ! Clean residual min=-0.001479 max=0.001696 Jy/beam ! Clean residual mean=0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.111431 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 169 components and 0.111431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101647Jy sigma=0.000656 ! Fit after self-cal, rms=0.101644Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226268 Jy ! Component: 100 - total flux cleaned = 0.000270023 Jy ! Component: 150 - total flux cleaned = 0.000221648 Jy ! Component: 200 - total flux cleaned = 0.000161901 Jy ! Total flux subtracted in 200 components = 0.000161901 Jy ! Clean residual min=-0.001456 max=0.001721 Jy/beam ! Clean residual mean=0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.111593 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 174 components and 0.111593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101644Jy sigma=0.000656 ! Fit after self-cal, rms=0.101642Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=8.402 mas, bpa=-1.374 degrees ! Estimated noise=664.833 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 8.402 at -1.374 degrees (North through East) ! Clean map min=-0.0017112 max=0.063109 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.684 mas, bmaj=6.913 mas, bpa=-2.119 degrees ! Estimated noise=1027.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491545 Jy ! Component: 100 - total flux cleaned = 0.0648415 Jy ! Component: 150 - total flux cleaned = 0.0740378 Jy ! Component: 200 - total flux cleaned = 0.0806632 Jy ! Total flux subtracted in 200 components = 0.0806632 Jy ! Clean residual min=-0.002735 max=0.004016 Jy/beam ! Clean residual mean=-0.000016 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0806632 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0806632 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=8.402 mas, bpa=-1.374 degrees ! Estimated noise=664.833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804133 Jy ! Component: 100 - total flux cleaned = 0.0135962 Jy ! Component: 150 - total flux cleaned = 0.0176813 Jy ! Component: 200 - total flux cleaned = 0.0207756 Jy ! Total flux subtracted in 200 components = 0.0207756 Jy ! Clean residual min=-0.001935 max=0.003007 Jy/beam ! Clean residual mean=-0.000010 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.101439 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 56 components and 0.101439 Jy ! Inverting map ! Added new window around map position (23.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285529 Jy ! Component: 100 - total flux cleaned = 0.00486156 Jy ! Component: 150 - total flux cleaned = 0.0064425 Jy ! Component: 200 - total flux cleaned = 0.00769443 Jy ! Total flux subtracted in 200 components = 0.00769443 Jy ! Clean residual min=-0.001709 max=0.001718 Jy/beam ! Clean residual mean=-0.000002 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.109133 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 82 components and 0.109133 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.913 mas, bmaj=16 mas, bpa=2.911 degrees ! Estimated noise=795.165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013833 Jy ! Component: 100 - total flux cleaned = 0.00227399 Jy ! Component: 150 - total flux cleaned = 0.0025389 Jy ! Component: 200 - total flux cleaned = 0.0027572 Jy ! Total flux subtracted in 200 components = 0.0027572 Jy ! Clean residual min=-0.001482 max=0.001715 Jy/beam ! Clean residual mean=0.000002 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.11189 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.23658e-05 Jy ! Component: 100 - total flux cleaned = 0.000143633 Jy ! Component: 150 - total flux cleaned = 0.000190678 Jy ! Component: 200 - total flux cleaned = 0.000233829 Jy ! Total flux subtracted in 200 components = 0.000233829 Jy ! Clean residual min=-0.001443 max=0.001697 Jy/beam ! Clean residual mean=0.000003 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.112124 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 123 components and 0.112124 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=8.402 mas, bpa=-1.374 degrees ! Estimated noise=664.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114482 Jy ! Component: 100 - total flux cleaned = 1.32123e-05 Jy ! Component: 150 - total flux cleaned = 3.45909e-05 Jy ! Component: 200 - total flux cleaned = 7.49215e-05 Jy ! Total flux subtracted in 200 components = 7.49215e-05 Jy ! Clean residual min=-0.001787 max=0.001599 Jy/beam ! Clean residual mean=0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.112199 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 140 components and 0.112199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101607Jy sigma=0.000655 ! Fit after self-cal, rms=0.101585Jy sigma=0.000655 wmodel J1008-1629_S_2017_03_27_pus_map.mod ! Writing 140 model components to file: J1008-1629_S_2017_03_27_pus_map.mod wobs J1008-1629_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1008-1629_S_2017_03_27_pus_uvs.fits wwins J1008-1629_S_2017_03_27_pus_map.win ! wwins: Wrote 4 windows to J1008-1629_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.8064e-05 Jy ! Component: 100 - total flux cleaned = 0.000135812 Jy ! Component: 150 - total flux cleaned = 0.000213403 Jy ! Component: 200 - total flux cleaned = 0.000288812 Jy ! Component: 250 - total flux cleaned = 0.000338438 Jy ! Component: 300 - total flux cleaned = 0.000361886 Jy ! Component: 350 - total flux cleaned = 0.000222959 Jy ! Component: 400 - total flux cleaned = 0.000223558 Jy ! Component: 450 - total flux cleaned = 0.000156936 Jy ! Component: 500 - total flux cleaned = 4.81061e-05 Jy ! Component: 550 - total flux cleaned = 5.52213e-06 Jy ! Component: 600 - total flux cleaned = -5.72485e-05 Jy ! Component: 650 - total flux cleaned = -3.6689e-05 Jy ! Component: 700 - total flux cleaned = -5.72335e-05 Jy ! Component: 750 - total flux cleaned = -0.000117449 Jy ! Component: 800 - total flux cleaned = -9.81078e-05 Jy ! Component: 850 - total flux cleaned = -9.83142e-05 Jy ! Component: 900 - total flux cleaned = -0.000117595 Jy ! Component: 950 - total flux cleaned = -0.000193454 Jy ! Component: 1000 - total flux cleaned = -0.000193358 Jy ! Component: 1050 - total flux cleaned = -0.00024903 Jy ! Component: 1100 - total flux cleaned = -0.000193886 Jy ! Component: 1150 - total flux cleaned = -0.000211978 Jy ! Component: 1200 - total flux cleaned = -0.000247827 Jy ! Component: 1250 - total flux cleaned = -0.000194575 Jy ! Component: 1300 - total flux cleaned = -0.000229827 Jy ! Component: 1350 - total flux cleaned = -0.000299273 Jy ! Component: 1400 - total flux cleaned = -0.000298854 Jy ! Component: 1450 - total flux cleaned = -0.000315771 Jy ! Component: 1500 - total flux cleaned = -0.000366322 Jy ! Component: 1550 - total flux cleaned = -0.000399493 Jy ! Component: 1600 - total flux cleaned = -0.000399239 Jy ! Component: 1650 - total flux cleaned = -0.000481168 Jy ! Component: 1700 - total flux cleaned = -0.000497429 Jy ! Component: 1750 - total flux cleaned = -0.000561845 Jy ! Component: 1800 - total flux cleaned = -0.000593811 Jy ! Component: 1850 - total flux cleaned = -0.000609813 Jy ! Component: 1900 - total flux cleaned = -0.000719607 Jy ! Component: 1950 - total flux cleaned = -0.000735098 Jy ! Component: 2000 - total flux cleaned = -0.000843253 Jy ! Component: 2050 - total flux cleaned = -0.000904469 Jy ! Component: 2100 - total flux cleaned = -0.000965175 Jy ! Component: 2150 - total flux cleaned = -0.00098043 Jy ! Component: 2200 - total flux cleaned = -0.00105537 Jy ! Component: 2250 - total flux cleaned = -0.00117403 Jy ! Component: 2300 - total flux cleaned = -0.00121823 Jy ! Component: 2350 - total flux cleaned = -0.00127668 Jy ! Component: 2400 - total flux cleaned = -0.00133473 Jy ! Component: 2450 - total flux cleaned = -0.00143554 Jy ! Component: 2500 - total flux cleaned = -0.00146406 Jy ! Component: 2550 - total flux cleaned = -0.00153507 Jy ! Component: 2600 - total flux cleaned = -0.00157724 Jy ! Component: 2650 - total flux cleaned = -0.00164694 Jy ! Component: 2700 - total flux cleaned = -0.00173027 Jy ! Component: 2750 - total flux cleaned = -0.00178534 Jy ! Component: 2800 - total flux cleaned = -0.00182638 Jy ! Component: 2850 - total flux cleaned = -0.00190802 Jy ! Component: 2900 - total flux cleaned = -0.00197542 Jy ! Component: 2950 - total flux cleaned = -0.00208248 Jy ! Component: 3000 - total flux cleaned = -0.00205585 Jy ! Component: 3050 - total flux cleaned = -0.00220145 Jy ! Component: 3100 - total flux cleaned = -0.00224086 Jy ! Component: 3150 - total flux cleaned = -0.00228008 Jy ! Component: 3200 - total flux cleaned = -0.00233206 Jy ! Component: 3250 - total flux cleaned = -0.00242226 Jy ! Component: 3300 - total flux cleaned = -0.00243523 Jy ! Component: 3350 - total flux cleaned = -0.00246067 Jy ! Component: 3400 - total flux cleaned = -0.00252411 Jy ! Component: 3450 - total flux cleaned = -0.0026124 Jy ! Component: 3500 - total flux cleaned = -0.00266237 Jy ! Component: 3550 - total flux cleaned = -0.00271206 Jy ! Component: 3600 - total flux cleaned = -0.00268732 Jy ! Component: 3650 - total flux cleaned = -0.00279812 Jy ! Component: 3700 - total flux cleaned = -0.00287146 Jy ! Component: 3750 - total flux cleaned = -0.00287156 Jy ! Component: 3800 - total flux cleaned = -0.00288372 Jy ! Component: 3850 - total flux cleaned = -0.00294396 Jy ! Component: 3900 - total flux cleaned = -0.00297985 Jy ! Component: 3950 - total flux cleaned = -0.00297981 Jy ! Component: 4000 - total flux cleaned = -0.00296792 Jy ! Component: 4050 - total flux cleaned = -0.00306216 Jy ! Total flux subtracted in 4096 components = -0.00310896 Jy ! Clean residual min=-0.000640 max=0.000663 Jy/beam ! Clean residual mean=0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.10909 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 415 components and 0.10909 Jy ![Exited script file: muppet] wmap "J1008-1629_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 8.402 at -1.374 degrees (North through East) ! Clean map min=-0.0014339 max=0.062276 Jy/beam ! Writing clean map to FITS file: J1008-1629_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0622763 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021941 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05695 1.05695 2.11391 4.22781 8.45562 16.9112 33.8225 67.645 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 8.402 at -1.374 degrees (North through East) ! Clean map min=-0.0014339 max=0.062276 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1008-1629_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:38:33 2019