! Started logfile: J1007-0207_S_2017_05_27_pus_uvs.log on Fri May 3 11:04:27 2019 obs J1007-0207_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1007-0207_S_2017_05_27_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.952075 visibilities/baseline/integration-bin. ! Found source: J1007-0207 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 14224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1007-0207_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 439 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.715036Jy sigma=0.005506 ! Fit after self-cal, rms=0.699167Jy sigma=0.005393 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.256 mas, bpa=-4.072 degrees ! Estimated noise=1131.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.225096 Jy ! Component: 100 - total flux cleaned = 0.300866 Jy ! Total flux subtracted in 100 components = 0.300866 Jy ! Clean residual min=-0.019169 max=0.050190 Jy/beam ! Clean residual mean=0.000098 rms=0.004864 Jy/beam ! Combined flux in latest and established models = 0.300866 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.300866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165218Jy sigma=0.001068 ! Fit after self-cal, rms=0.164916Jy sigma=0.001066 ! Inverting map ! Added new window around map position (-5.5, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507781 Jy ! Component: 100 - total flux cleaned = 0.0818845 Jy ! Total flux subtracted in 100 components = 0.0818845 Jy ! Clean residual min=-0.014067 max=0.020805 Jy/beam ! Clean residual mean=0.000060 rms=0.003136 Jy/beam ! Combined flux in latest and established models = 0.382751 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.382751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140090Jy sigma=0.000850 ! Fit after self-cal, rms=0.138572Jy sigma=0.000839 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246997 Jy ! Component: 100 - total flux cleaned = 0.0374039 Jy ! Total flux subtracted in 100 components = 0.0374039 Jy ! Clean residual min=-0.010372 max=0.015784 Jy/beam ! Clean residual mean=0.000042 rms=0.002438 Jy/beam ! Combined flux in latest and established models = 0.420155 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.420155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130938Jy sigma=0.000779 ! Fit after self-cal, rms=0.130507Jy sigma=0.000776 ! Inverting map ! Added new window around map position (-14.5, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160216 Jy ! Component: 100 - total flux cleaned = 0.0229477 Jy ! Total flux subtracted in 100 components = 0.0229477 Jy ! Clean residual min=-0.008319 max=0.008639 Jy/beam ! Clean residual mean=0.000030 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 0.443102 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 0.443102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127198Jy sigma=0.000750 ! Fit after self-cal, rms=0.127081Jy sigma=0.000750 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=8.13 mas, bpa=-3.79 degrees ! Estimated noise=889.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151133 Jy ! Component: 100 - total flux cleaned = 0.0251371 Jy ! Component: 150 - total flux cleaned = 0.0288621 Jy ! Component: 200 - total flux cleaned = 0.0317617 Jy ! Total flux subtracted in 200 components = 0.0317617 Jy ! Clean residual min=-0.008309 max=0.007773 Jy/beam ! Clean residual mean=0.000020 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.474864 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 70 components and 0.474864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123683Jy sigma=0.000732 ! Fit after self-cal, rms=0.123531Jy sigma=0.000731 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 1.00 KP 1.01 ! LA 0.97 MK 0.96 NL 0.96 OV 1.05 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.97 HN 1.05 KP 0.96 ! LA 0.93 MK 0.96 NL 1.09 OV 1.09 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.02 HN 1.05 KP 1.00 ! LA 0.98 MK 0.99 NL 1.01 OV 0.98 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.96 KP 1.00* ! LA 0.98 MK 1.05 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.123531Jy sigma=0.000731 ! Fit after self-cal, rms=0.110029Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=8.12 mas, bpa=-4.05 degrees ! Estimated noise=886.339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545645 Jy ! Component: 100 - total flux cleaned = 0.0069144 Jy ! Component: 150 - total flux cleaned = 0.00744304 Jy ! Component: 200 - total flux cleaned = 0.00762709 Jy ! Total flux subtracted in 200 components = 0.00762709 Jy ! Clean residual min=-0.006346 max=0.004923 Jy/beam ! Clean residual mean=-0.000000 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.482491 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.482491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109640Jy sigma=0.000707 ! Fit after self-cal, rms=0.109527Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109527Jy sigma=0.000706 ! Fit after self-cal, rms=0.099329Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=8.125 mas, bpa=-4.106 degrees ! Estimated noise=886.776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419436 Jy ! Component: 100 - total flux cleaned = 0.0048381 Jy ! Component: 150 - total flux cleaned = 0.00510668 Jy ! Component: 200 - total flux cleaned = 0.00526619 Jy ! Total flux subtracted in 200 components = 0.00526619 Jy ! Clean residual min=-0.004507 max=0.004198 Jy/beam ! Clean residual mean=0.000003 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.487757 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.487757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099029Jy sigma=0.000675 ! Fit after self-cal, rms=0.098972Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978952 Jy ! Component: 100 - total flux cleaned = 0.00105223 Jy ! Component: 150 - total flux cleaned = 0.000916418 Jy ! Component: 200 - total flux cleaned = 0.000915285 Jy ! Total flux subtracted in 200 components = 0.000915285 Jy ! Clean residual min=-0.004159 max=0.004200 Jy/beam ! Clean residual mean=0.000002 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.488673 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 110 components and 0.488673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098842Jy sigma=0.000674 ! Fit after self-cal, rms=0.098825Jy sigma=0.000674 ! Inverting map ! Added new window around map position (-26.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436198 Jy ! Component: 100 - total flux cleaned = 0.00674826 Jy ! Component: 150 - total flux cleaned = 0.00736326 Jy ! Component: 200 - total flux cleaned = 0.0075654 Jy ! Total flux subtracted in 200 components = 0.0075654 Jy ! Clean residual min=-0.003928 max=0.002933 Jy/beam ! Clean residual mean=-0.000003 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.496238 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 0.496238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098585Jy sigma=0.000672 ! Fit after self-cal, rms=0.098561Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098561Jy sigma=0.000672 ! Fit after self-cal, rms=0.095694Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=8.115 mas, bpa=-4.093 degrees ! Estimated noise=885.305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206953 Jy ! Component: 100 - total flux cleaned = 0.00334837 Jy ! Component: 150 - total flux cleaned = 0.00419693 Jy ! Component: 200 - total flux cleaned = 0.00429871 Jy ! Total flux subtracted in 200 components = 0.00429871 Jy ! Clean residual min=-0.002880 max=0.002489 Jy/beam ! Clean residual mean=0.000002 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.500537 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 153 components and 0.500537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095591Jy sigma=0.000666 ! Fit after self-cal, rms=0.095562Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501948 Jy ! Component: 100 - total flux cleaned = 0.00100483 Jy ! Component: 150 - total flux cleaned = 0.001184 Jy ! Component: 200 - total flux cleaned = 0.00138812 Jy ! Total flux subtracted in 200 components = 0.00138812 Jy ! Clean residual min=-0.002839 max=0.002388 Jy/beam ! Clean residual mean=0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.501925 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 163 components and 0.501925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095513Jy sigma=0.000665 ! Fit after self-cal, rms=0.095504Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095504Jy sigma=0.000665 ! Fit after self-cal, rms=0.095521Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.553 mas, bmaj=13.18 mas, bpa=-4.868 degrees ! Estimated noise=1096.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155725 Jy ! Component: 100 - total flux cleaned = 0.00168786 Jy ! Component: 150 - total flux cleaned = 0.00183523 Jy ! Component: 200 - total flux cleaned = 0.00194736 Jy ! Total flux subtracted in 200 components = 0.00194736 Jy ! Clean residual min=-0.002535 max=0.002616 Jy/beam ! Clean residual mean=0.000003 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.503872 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 171 components and 0.503872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095507Jy sigma=0.000665 ! Fit after self-cal, rms=0.095498Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423828 Jy ! Component: 100 - total flux cleaned = 0.000548113 Jy ! Component: 150 - total flux cleaned = 0.000463142 Jy ! Component: 200 - total flux cleaned = 0.000330894 Jy ! Total flux subtracted in 200 components = 0.000330894 Jy ! Clean residual min=-0.002523 max=0.002639 Jy/beam ! Clean residual mean=0.000001 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.504203 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 178 components and 0.504203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095498Jy sigma=0.000665 ! Fit after self-cal, rms=0.095495Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=8.113 mas, bpa=-4.045 degrees ! Estimated noise=885.754 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 8.113 at -4.045 degrees (North through East) ! Clean map min=-0.0034757 max=0.29727 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=7.229 mas, bpa=-4.303 degrees ! Estimated noise=1127.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222986 Jy ! Component: 100 - total flux cleaned = 0.309033 Jy ! Component: 150 - total flux cleaned = 0.361374 Jy ! Component: 200 - total flux cleaned = 0.39426 Jy ! Total flux subtracted in 200 components = 0.39426 Jy ! Clean residual min=-0.008725 max=0.017502 Jy/beam ! Clean residual mean=0.000057 rms=0.002283 Jy/beam ! Combined flux in latest and established models = 0.39426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.39426 Jy ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=8.113 mas, bpa=-4.045 degrees ! Estimated noise=885.754 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0308222 Jy ! Component: 100 - total flux cleaned = 0.050773 Jy ! Component: 150 - total flux cleaned = 0.0649691 Jy ! Component: 200 - total flux cleaned = 0.0753851 Jy ! Total flux subtracted in 200 components = 0.0753851 Jy ! Clean residual min=-0.004818 max=0.006511 Jy/beam ! Clean residual mean=0.000031 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.469645 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 67 components and 0.469645 Jy ! Inverting map ! Added new window around map position (-20, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795425 Jy ! Component: 100 - total flux cleaned = 0.0142875 Jy ! Component: 150 - total flux cleaned = 0.019515 Jy ! Component: 200 - total flux cleaned = 0.0228684 Jy ! Total flux subtracted in 200 components = 0.0228684 Jy ! Clean residual min=-0.003447 max=0.003111 Jy/beam ! Clean residual mean=0.000013 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.492513 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 99 components and 0.492513 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.553 mas, bmaj=13.18 mas, bpa=-4.868 degrees ! Estimated noise=1096.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579976 Jy ! Component: 100 - total flux cleaned = 0.00847385 Jy ! Component: 150 - total flux cleaned = 0.00970236 Jy ! Component: 200 - total flux cleaned = 0.0104259 Jy ! Total flux subtracted in 200 components = 0.0104259 Jy ! Clean residual min=-0.003202 max=0.003018 Jy/beam ! Clean residual mean=0.000009 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.502939 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000446255 Jy ! Component: 100 - total flux cleaned = 0.000910032 Jy ! Component: 150 - total flux cleaned = 0.00111528 Jy ! Component: 200 - total flux cleaned = 0.00129848 Jy ! Total flux subtracted in 200 components = 0.00129848 Jy ! Clean residual min=-0.002774 max=0.002606 Jy/beam ! Clean residual mean=0.000005 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.504237 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 176 components and 0.504238 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=8.113 mas, bpa=-4.045 degrees ! Estimated noise=885.754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.92361e-05 Jy ! Component: 100 - total flux cleaned = 0.000171402 Jy ! Component: 150 - total flux cleaned = 0.00023801 Jy ! Component: 200 - total flux cleaned = 0.000299319 Jy ! Total flux subtracted in 200 components = 0.000299319 Jy ! Clean residual min=-0.002911 max=0.002330 Jy/beam ! Clean residual mean=0.000002 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.504537 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 196 components and 0.504537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095620Jy sigma=0.000665 ! Fit after self-cal, rms=0.095578Jy sigma=0.000665 wmodel J1007-0207_S_2017_05_27_pus_map.mod ! Writing 196 model components to file: J1007-0207_S_2017_05_27_pus_map.mod wobs J1007-0207_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1007-0207_S_2017_05_27_pus_uvs.fits wwins J1007-0207_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J1007-0207_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123507 Jy ! Component: 100 - total flux cleaned = -0.00176911 Jy ! Component: 150 - total flux cleaned = -0.00168733 Jy ! Component: 200 - total flux cleaned = -0.00164713 Jy ! Component: 250 - total flux cleaned = -0.00149274 Jy ! Component: 300 - total flux cleaned = -0.00149161 Jy ! Component: 350 - total flux cleaned = -0.00152751 Jy ! Component: 400 - total flux cleaned = -0.00159834 Jy ! Component: 450 - total flux cleaned = -0.0016676 Jy ! Component: 500 - total flux cleaned = -0.00163375 Jy ! Component: 550 - total flux cleaned = -0.00160063 Jy ! Component: 600 - total flux cleaned = -0.00153599 Jy ! Component: 650 - total flux cleaned = -0.00153605 Jy ! Component: 700 - total flux cleaned = -0.00144159 Jy ! Component: 750 - total flux cleaned = -0.00144079 Jy ! Component: 800 - total flux cleaned = -0.00137939 Jy ! Component: 850 - total flux cleaned = -0.00137908 Jy ! Component: 900 - total flux cleaned = -0.00137892 Jy ! Component: 950 - total flux cleaned = -0.0013496 Jy ! Component: 1000 - total flux cleaned = -0.00134918 Jy ! Component: 1050 - total flux cleaned = -0.00129179 Jy ! Component: 1100 - total flux cleaned = -0.00134867 Jy ! Component: 1150 - total flux cleaned = -0.00148837 Jy ! Component: 1200 - total flux cleaned = -0.0015429 Jy ! Component: 1250 - total flux cleaned = -0.00135169 Jy ! Component: 1300 - total flux cleaned = -0.00143284 Jy ! Component: 1350 - total flux cleaned = -0.00143267 Jy ! Component: 1400 - total flux cleaned = -0.00143215 Jy ! Component: 1450 - total flux cleaned = -0.00138013 Jy ! Component: 1500 - total flux cleaned = -0.00140613 Jy ! Component: 1550 - total flux cleaned = -0.0013548 Jy ! Component: 1600 - total flux cleaned = -0.00140578 Jy ! Component: 1650 - total flux cleaned = -0.00130538 Jy ! Component: 1700 - total flux cleaned = -0.00137998 Jy ! Component: 1750 - total flux cleaned = -0.00145354 Jy ! Component: 1800 - total flux cleaned = -0.00140448 Jy ! Component: 1850 - total flux cleaned = -0.00142896 Jy ! Component: 1900 - total flux cleaned = -0.00142913 Jy ! Component: 1950 - total flux cleaned = -0.00140572 Jy ! Component: 2000 - total flux cleaned = -0.0014759 Jy ! Component: 2050 - total flux cleaned = -0.00145294 Jy ! Component: 2100 - total flux cleaned = -0.00147604 Jy ! Component: 2150 - total flux cleaned = -0.00145307 Jy ! Component: 2200 - total flux cleaned = -0.00152111 Jy ! Component: 2250 - total flux cleaned = -0.00149845 Jy ! Component: 2300 - total flux cleaned = -0.00149869 Jy ! Component: 2350 - total flux cleaned = -0.00143252 Jy ! Component: 2400 - total flux cleaned = -0.00154222 Jy ! Component: 2450 - total flux cleaned = -0.00152075 Jy ! Component: 2500 - total flux cleaned = -0.00160702 Jy ! Component: 2550 - total flux cleaned = -0.00162837 Jy ! Component: 2600 - total flux cleaned = -0.00162839 Jy ! Component: 2650 - total flux cleaned = -0.00156498 Jy ! Component: 2700 - total flux cleaned = -0.00156485 Jy ! Component: 2750 - total flux cleaned = -0.00164777 Jy ! Component: 2800 - total flux cleaned = -0.00168891 Jy ! Component: 2850 - total flux cleaned = -0.00168914 Jy ! Component: 2900 - total flux cleaned = -0.0017299 Jy ! Component: 2950 - total flux cleaned = -0.00181059 Jy ! Component: 3000 - total flux cleaned = -0.00179046 Jy ! Component: 3050 - total flux cleaned = -0.0018498 Jy ! Component: 3100 - total flux cleaned = -0.00183021 Jy ! Component: 3150 - total flux cleaned = -0.00188892 Jy ! Component: 3200 - total flux cleaned = -0.00192798 Jy ! Component: 3250 - total flux cleaned = -0.00198577 Jy ! Component: 3300 - total flux cleaned = -0.00206259 Jy ! Component: 3350 - total flux cleaned = -0.00211976 Jy ! Component: 3400 - total flux cleaned = -0.00208172 Jy ! Component: 3450 - total flux cleaned = -0.00215709 Jy ! Component: 3500 - total flux cleaned = -0.00213854 Jy ! Component: 3550 - total flux cleaned = -0.0022687 Jy ! Component: 3600 - total flux cleaned = -0.00230557 Jy ! Component: 3650 - total flux cleaned = -0.00226902 Jy ! Component: 3700 - total flux cleaned = -0.00234181 Jy ! Component: 3750 - total flux cleaned = -0.00232387 Jy ! Component: 3800 - total flux cleaned = -0.00248569 Jy ! Component: 3850 - total flux cleaned = -0.00246786 Jy ! Component: 3900 - total flux cleaned = -0.00246759 Jy ! Component: 3950 - total flux cleaned = -0.00246766 Jy ! Component: 4000 - total flux cleaned = -0.00262523 Jy ! Component: 4050 - total flux cleaned = -0.00255562 Jy ! Total flux subtracted in 4096 components = -0.0025383 Jy ! Clean residual min=-0.001067 max=0.000943 Jy/beam ! Clean residual mean=-0.000000 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.501999 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 465 components and 0.501999 Jy ![Exited script file: muppet] wmap "J1007-0207_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 8.113 at -4.045 degrees (North through East) ! Clean map min=-0.0024095 max=0.29588 Jy/beam ! Writing clean map to FITS file: J1007-0207_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.295882 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000321568 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.326044 0.326044 0.652088 1.30418 2.60835 5.21671 10.4334 20.8668 41.7337 83.4673 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.295 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 8.113 at -4.045 degrees (North through East) ! Clean map min=-0.0024095 max=0.29588 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1007-0207_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:04:32 2019