! Started logfile: J1007+0708_S_2017_10_09_pus_uvs.log on Sun May 12 13:09:37 2019 obs J1007+0708_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1007+0708_S_2017_10_09_pus_uva.fits ! AN table 1: 195 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.747578 visibilities/baseline/integration-bin. ! Found source: J1007+0708 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 20992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1007+0708_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 519 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1013 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.795633Jy sigma=0.006850 ! Fit after self-cal, rms=0.777679Jy sigma=0.006694 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=12.58 mas, bpa=-19.72 degrees ! Estimated noise=1051.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173693 Jy ! Component: 100 - total flux cleaned = 0.211767 Jy ! Total flux subtracted in 100 components = 0.211767 Jy ! Clean residual min=-0.007552 max=0.011996 Jy/beam ! Clean residual mean=-0.000036 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.211767 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.211767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092065Jy sigma=0.000689 ! Fit after self-cal, rms=0.092063Jy sigma=0.000689 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=13.66 mas, bpa=-20.04 degrees ! Estimated noise=693.144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129707 Jy ! Component: 100 - total flux cleaned = 0.0188634 Jy ! Component: 150 - total flux cleaned = 0.0207998 Jy ! Component: 200 - total flux cleaned = 0.0212375 Jy ! Total flux subtracted in 200 components = 0.0212375 Jy ! Clean residual min=-0.004839 max=0.005935 Jy/beam ! Clean residual mean=-0.000031 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.233005 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.233005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089588Jy sigma=0.000678 ! Fit after self-cal, rms=0.089573Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.99 KP 1.08 ! LA 1.03 MK 0.99 NL 0.92 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.02 KP 1.03 ! LA 1.01 MK 0.98 NL 0.96 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.08 HN 1.00 KP 0.91 ! LA 0.79 MK 1.01 NL 1.15 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.96 KP 1.00* ! LA 1.00* MK 1.13 NL 1.00* OV 1.00* ! PT 1.04 ! ! ! Fit before self-cal, rms=0.089573Jy sigma=0.000678 ! Fit after self-cal, rms=0.084046Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=13.49 mas, bpa=-20.09 degrees ! Estimated noise=691.082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000935003 Jy ! Component: 100 - total flux cleaned = -0.000862508 Jy ! Component: 150 - total flux cleaned = -0.000830978 Jy ! Component: 200 - total flux cleaned = -0.000775629 Jy ! Total flux subtracted in 200 components = -0.000775629 Jy ! Clean residual min=-0.002694 max=0.003016 Jy/beam ! Clean residual mean=-0.000018 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.232229 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 0.232229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084009Jy sigma=0.000655 ! Fit after self-cal, rms=0.083978Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083978Jy sigma=0.000655 ! Fit after self-cal, rms=0.085631Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.374 mas, bmaj=13.46 mas, bpa=-20.05 degrees ! Estimated noise=691.864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000522476 Jy ! Component: 100 - total flux cleaned = -0.000700434 Jy ! Component: 150 - total flux cleaned = -0.000875279 Jy ! Component: 200 - total flux cleaned = -0.000989279 Jy ! Total flux subtracted in 200 components = -0.000989279 Jy ! Clean residual min=-0.001809 max=0.001726 Jy/beam ! Clean residual mean=-0.000010 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.23124 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.23124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085606Jy sigma=0.000651 ! Fit after self-cal, rms=0.085657Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225511 Jy ! Component: 100 - total flux cleaned = -0.000210675 Jy ! Component: 150 - total flux cleaned = -0.000171905 Jy ! Component: 200 - total flux cleaned = -0.000148439 Jy ! Total flux subtracted in 200 components = -0.000148439 Jy ! Clean residual min=-0.001766 max=0.001684 Jy/beam ! Clean residual mean=-0.000011 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.231091 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.231091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085649Jy sigma=0.000651 ! Fit after self-cal, rms=0.085647Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085647Jy sigma=0.000651 ! Fit after self-cal, rms=0.086072Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=13.47 mas, bpa=-20.05 degrees ! Estimated noise=693.508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.69252e-05 Jy ! Component: 100 - total flux cleaned = -0.000106785 Jy ! Component: 150 - total flux cleaned = -0.000216283 Jy ! Component: 200 - total flux cleaned = -0.000270449 Jy ! Total flux subtracted in 200 components = -0.000270449 Jy ! Clean residual min=-0.001674 max=0.001683 Jy/beam ! Clean residual mean=-0.000010 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.230821 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.230821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086054Jy sigma=0.000651 ! Fit after self-cal, rms=0.086060Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106616 Jy ! Component: 100 - total flux cleaned = -9.53542e-05 Jy ! Component: 150 - total flux cleaned = -9.55246e-05 Jy ! Component: 200 - total flux cleaned = -9.60883e-05 Jy ! Total flux subtracted in 200 components = -9.60883e-05 Jy ! Clean residual min=-0.001652 max=0.001663 Jy/beam ! Clean residual mean=-0.000010 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.230725 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.230725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086054Jy sigma=0.000651 ! Fit after self-cal, rms=0.086052Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086052Jy sigma=0.000651 ! Fit after self-cal, rms=0.086344Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.908 mas, bmaj=13.8 mas, bpa=-21.72 degrees ! Estimated noise=864.202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.16801e-05 Jy ! Component: 100 - total flux cleaned = -8.29354e-05 Jy ! Component: 150 - total flux cleaned = -0.000106628 Jy ! Component: 200 - total flux cleaned = -0.000124458 Jy ! Total flux subtracted in 200 components = -0.000124458 Jy ! Clean residual min=-0.001921 max=0.001803 Jy/beam ! Clean residual mean=-0.000019 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.2306 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.2306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086335Jy sigma=0.000650 ! Fit after self-cal, rms=0.086338Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.7377e-05 Jy ! Component: 100 - total flux cleaned = -9.12025e-06 Jy ! Component: 150 - total flux cleaned = -8.94303e-06 Jy ! Component: 200 - total flux cleaned = -2.36121e-06 Jy ! Total flux subtracted in 200 components = -2.36121e-06 Jy ! Clean residual min=-0.001946 max=0.001765 Jy/beam ! Clean residual mean=-0.000019 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.230598 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 86 components and 0.230598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086337Jy sigma=0.000650 ! Fit after self-cal, rms=0.086337Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=13.48 mas, bpa=-20.05 degrees ! Estimated noise=695.227 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 13.48 at -20.05 degrees (North through East) ! Clean map min=-0.0016202 max=0.2244 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=12.37 mas, bpa=-19.74 degrees ! Estimated noise=1055.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174106 Jy ! Component: 100 - total flux cleaned = 0.212073 Jy ! Component: 150 - total flux cleaned = 0.222992 Jy ! Component: 200 - total flux cleaned = 0.227533 Jy ! Total flux subtracted in 200 components = 0.227533 Jy ! Clean residual min=-0.002825 max=0.002857 Jy/beam ! Clean residual mean=-0.000007 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.227533 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.227533 Jy ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=13.48 mas, bpa=-20.05 degrees ! Estimated noise=695.227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235553 Jy ! Component: 100 - total flux cleaned = 0.00292366 Jy ! Component: 150 - total flux cleaned = 0.00315838 Jy ! Component: 200 - total flux cleaned = 0.00320407 Jy ! Total flux subtracted in 200 components = 0.00320407 Jy ! Clean residual min=-0.001739 max=0.001697 Jy/beam ! Clean residual mean=-0.000010 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.230737 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.230737 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.908 mas, bmaj=13.8 mas, bpa=-21.72 degrees ! Estimated noise=864.202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140586 Jy ! Component: 100 - total flux cleaned = 9.13276e-05 Jy ! Component: 150 - total flux cleaned = 5.04696e-05 Jy ! Component: 200 - total flux cleaned = 1.45579e-05 Jy ! Total flux subtracted in 200 components = 1.45579e-05 Jy ! Clean residual min=-0.001995 max=0.001794 Jy/beam ! Clean residual mean=-0.000018 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.230752 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.30378e-05 Jy ! Component: 100 - total flux cleaned = -6.33221e-05 Jy ! Component: 150 - total flux cleaned = -9.1022e-05 Jy ! Component: 200 - total flux cleaned = -0.000103132 Jy ! Total flux subtracted in 200 components = -0.000103132 Jy ! Clean residual min=-0.001968 max=0.001800 Jy/beam ! Clean residual mean=-0.000018 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.230649 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 77 components and 0.230649 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=13.48 mas, bpa=-20.05 degrees ! Estimated noise=695.227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.75642e-05 Jy ! Component: 100 - total flux cleaned = -2.06062e-05 Jy ! Component: 150 - total flux cleaned = -0.000104785 Jy ! Component: 200 - total flux cleaned = -0.000122831 Jy ! Total flux subtracted in 200 components = -0.000122831 Jy ! Clean residual min=-0.001633 max=0.001670 Jy/beam ! Clean residual mean=-0.000010 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.230526 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.230526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086340Jy sigma=0.000651 ! Fit after self-cal, rms=0.086338Jy sigma=0.000651 wmodel J1007+0708_S_2017_10_09_pus_map.mod ! Writing 93 model components to file: J1007+0708_S_2017_10_09_pus_map.mod wobs J1007+0708_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1007+0708_S_2017_10_09_pus_uvs.fits wwins J1007+0708_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1007+0708_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.40112e-05 Jy ! Component: 100 - total flux cleaned = 2.46925e-05 Jy ! Component: 150 - total flux cleaned = 7.63019e-05 Jy ! Component: 200 - total flux cleaned = 0.00017085 Jy ! Component: 250 - total flux cleaned = 0.000101586 Jy ! Component: 300 - total flux cleaned = 5.73994e-05 Jy ! Component: 350 - total flux cleaned = -6.79576e-05 Jy ! Component: 400 - total flux cleaned = -0.000168457 Jy ! Component: 450 - total flux cleaned = -0.000285153 Jy ! Component: 500 - total flux cleaned = -0.000341729 Jy ! Component: 550 - total flux cleaned = -0.000433443 Jy ! Component: 600 - total flux cleaned = -0.000469019 Jy ! Component: 650 - total flux cleaned = -0.000538727 Jy ! Component: 700 - total flux cleaned = -0.000589563 Jy ! Component: 750 - total flux cleaned = -0.00063962 Jy ! Component: 800 - total flux cleaned = -0.000639951 Jy ! Component: 850 - total flux cleaned = -0.000703892 Jy ! Component: 900 - total flux cleaned = -0.000750325 Jy ! Component: 950 - total flux cleaned = -0.000749828 Jy ! Component: 1000 - total flux cleaned = -0.000734596 Jy ! Component: 1050 - total flux cleaned = -0.000778567 Jy ! Component: 1100 - total flux cleaned = -0.000778543 Jy ! Component: 1150 - total flux cleaned = -0.000778667 Jy ! Component: 1200 - total flux cleaned = -0.000820654 Jy ! Component: 1250 - total flux cleaned = -0.000889066 Jy ! Component: 1300 - total flux cleaned = -0.000902415 Jy ! Component: 1350 - total flux cleaned = -0.000902201 Jy ! Component: 1400 - total flux cleaned = -0.000889771 Jy ! Component: 1450 - total flux cleaned = -0.000953925 Jy ! Component: 1500 - total flux cleaned = -0.00102975 Jy ! Component: 1550 - total flux cleaned = -0.00101723 Jy ! Component: 1600 - total flux cleaned = -0.00100485 Jy ! Component: 1650 - total flux cleaned = -0.0010169 Jy ! Component: 1700 - total flux cleaned = -0.00101675 Jy ! Component: 1750 - total flux cleaned = -0.00100493 Jy ! Component: 1800 - total flux cleaned = -0.000981727 Jy ! Component: 1850 - total flux cleaned = -0.000993306 Jy ! Component: 1900 - total flux cleaned = -0.00097084 Jy ! Component: 1950 - total flux cleaned = -0.000948484 Jy ! Component: 2000 - total flux cleaned = -0.000882184 Jy ! Component: 2050 - total flux cleaned = -0.000882173 Jy ! Component: 2100 - total flux cleaned = -0.000828325 Jy ! Component: 2150 - total flux cleaned = -0.000785864 Jy ! Component: 2200 - total flux cleaned = -0.00076483 Jy ! Component: 2250 - total flux cleaned = -0.000733909 Jy ! Component: 2300 - total flux cleaned = -0.00072353 Jy ! Component: 2350 - total flux cleaned = -0.000652578 Jy ! Component: 2400 - total flux cleaned = -0.000622423 Jy ! Component: 2450 - total flux cleaned = -0.000572815 Jy ! Component: 2500 - total flux cleaned = -0.000563068 Jy ! Component: 2550 - total flux cleaned = -0.000514409 Jy ! Component: 2600 - total flux cleaned = -0.000466297 Jy ! Component: 2650 - total flux cleaned = -0.000466123 Jy ! Component: 2700 - total flux cleaned = -0.000456577 Jy ! Component: 2750 - total flux cleaned = -0.000409578 Jy ! Component: 2800 - total flux cleaned = -0.000372494 Jy ! Component: 2850 - total flux cleaned = -0.000344805 Jy ! Component: 2900 - total flux cleaned = -0.000317439 Jy ! Component: 2950 - total flux cleaned = -0.000299219 Jy ! Component: 3000 - total flux cleaned = -0.000236254 Jy ! Component: 3050 - total flux cleaned = -0.000156156 Jy ! Component: 3100 - total flux cleaned = -0.00012961 Jy ! Component: 3150 - total flux cleaned = -5.95177e-05 Jy ! Component: 3200 - total flux cleaned = 1.00348e-05 Jy ! Component: 3250 - total flux cleaned = 4.44649e-05 Jy ! Component: 3300 - total flux cleaned = 7.8645e-05 Jy ! Component: 3350 - total flux cleaned = 0.000163525 Jy ! Component: 3400 - total flux cleaned = 0.000197231 Jy ! Component: 3450 - total flux cleaned = 0.000230651 Jy ! Component: 3500 - total flux cleaned = 0.000288693 Jy ! Component: 3550 - total flux cleaned = 0.000346332 Jy ! Component: 3600 - total flux cleaned = 0.000370945 Jy ! Component: 3650 - total flux cleaned = 0.000387163 Jy ! Component: 3700 - total flux cleaned = 0.000435513 Jy ! Component: 3750 - total flux cleaned = 0.000515516 Jy ! Component: 3800 - total flux cleaned = 0.000499563 Jy ! Component: 3850 - total flux cleaned = 0.000531188 Jy ! Component: 3900 - total flux cleaned = 0.000570423 Jy ! Component: 3950 - total flux cleaned = 0.00061717 Jy ! Component: 4000 - total flux cleaned = 0.000640323 Jy ! Component: 4050 - total flux cleaned = 0.000678858 Jy ! Total flux subtracted in 4096 components = 0.000724715 Jy ! Clean residual min=-0.000421 max=0.000474 Jy/beam ! Clean residual mean=-0.000001 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.231251 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 399 components and 0.231251 Jy ![Exited script file: muppet] wmap "J1007+0708_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 13.48 at -20.05 degrees (North through East) ! Clean map min=-0.0010342 max=0.22426 Jy/beam ! Writing clean map to FITS file: J1007+0708_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.224261 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000145243 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.194296 0.194296 0.388592 0.777184 1.55437 3.10874 6.21748 12.435 24.8699 49.7398 99.4796 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.224 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 13.48 at -20.05 degrees (North through East) ! Clean map min=-0.0010342 max=0.22426 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1007+0708_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:09:42 2019