! Started logfile: J1005+4805_S_2017_04_28_pus_uvs.log on Thu May 2 16:22:45 2019 obs J1005+4805_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1005+4805_S_2017_04_28_pus_uva.fits ! AN table 1: 297 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.706622 visibilities/baseline/integration-bin. ! Found source: J1005+4805 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 37776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1005+4805_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 455 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 455 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 455 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1344 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994058Jy sigma=0.007913 ! Fit after self-cal, rms=0.955361Jy sigma=0.007619 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=9.909 mas, bpa=-88.62 degrees ! Estimated noise=1221.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355705 Jy ! Component: 100 - total flux cleaned = 0.0435178 Jy ! Total flux subtracted in 100 components = 0.0435178 Jy ! Clean residual min=-0.004177 max=0.004841 Jy/beam ! Clean residual mean=-0.000001 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.0435178 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0435178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086009Jy sigma=0.000649 ! Fit after self-cal, rms=0.084789Jy sigma=0.000639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.29 mas, bmaj=10.96 mas, bpa=85.9 degrees ! Estimated noise=503.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00553409 Jy ! Component: 100 - total flux cleaned = 0.0069775 Jy ! Component: 150 - total flux cleaned = 0.00698233 Jy ! Component: 200 - total flux cleaned = 0.00694832 Jy ! Total flux subtracted in 200 components = 0.00694832 Jy ! Clean residual min=-0.002340 max=0.002854 Jy/beam ! Clean residual mean=-0.000001 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0504661 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.0504661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084419Jy sigma=0.000637 ! Fit after self-cal, rms=0.084396Jy sigma=0.000636 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.91 HN 1.00 KP 1.03 ! LA 0.94 MK 1.07 NL 1.03 OV 1.04 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.88 HN 0.98 KP 0.95 ! LA 0.98 MK 1.02 NL 1.10 OV 1.21 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 0.98 KP 1.03 ! LA 0.95 MK 1.06 NL 1.10 OV 1.05 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.89 HN 0.88 KP 1.00* ! LA 0.80 MK 0.88 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.084396Jy sigma=0.000636 ! Fit after self-cal, rms=0.082465Jy sigma=0.000635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.299 mas, bmaj=10.81 mas, bpa=85.54 degrees ! Estimated noise=500.135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000566748 Jy ! Component: 100 - total flux cleaned = 0.00064432 Jy ! Component: 150 - total flux cleaned = 0.00071163 Jy ! Component: 200 - total flux cleaned = 0.000728004 Jy ! Total flux subtracted in 200 components = 0.000728004 Jy ! Clean residual min=-0.001707 max=0.002229 Jy/beam ! Clean residual mean=-0.000001 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0511941 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.0511942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082460Jy sigma=0.000635 ! Fit after self-cal, rms=0.082342Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082342Jy sigma=0.000634 ! Fit after self-cal, rms=0.082155Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.299 mas, bmaj=10.77 mas, bpa=85.39 degrees ! Estimated noise=499.909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043092 Jy ! Component: 100 - total flux cleaned = 0.000514401 Jy ! Component: 150 - total flux cleaned = 0.000568054 Jy ! Component: 200 - total flux cleaned = 0.000598329 Jy ! Total flux subtracted in 200 components = 0.000598329 Jy ! Clean residual min=-0.001797 max=0.002231 Jy/beam ! Clean residual mean=-0.000001 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0517925 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 0.0517925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082150Jy sigma=0.000634 ! Fit after self-cal, rms=0.082140Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.75458e-05 Jy ! Component: 100 - total flux cleaned = 9.50301e-05 Jy ! Component: 150 - total flux cleaned = 0.00011168 Jy ! Component: 200 - total flux cleaned = 0.000134889 Jy ! Total flux subtracted in 200 components = 0.000134889 Jy ! Clean residual min=-0.001807 max=0.002238 Jy/beam ! Clean residual mean=-0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0519274 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0519274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082138Jy sigma=0.000634 ! Fit after self-cal, rms=0.082133Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082133Jy sigma=0.000634 ! Fit after self-cal, rms=0.082341Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.28 mas, bmaj=10.74 mas, bpa=85.35 degrees ! Estimated noise=501.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043757 Jy ! Component: 100 - total flux cleaned = 0.000588043 Jy ! Component: 150 - total flux cleaned = 0.000639075 Jy ! Component: 200 - total flux cleaned = 0.000658209 Jy ! Total flux subtracted in 200 components = 0.000658209 Jy ! Clean residual min=-0.001792 max=0.002169 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0525856 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.0525856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082338Jy sigma=0.000634 ! Fit after self-cal, rms=0.082338Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.82435e-05 Jy ! Component: 100 - total flux cleaned = 7.48441e-05 Jy ! Component: 150 - total flux cleaned = 7.45998e-05 Jy ! Component: 200 - total flux cleaned = 8.0519e-05 Jy ! Total flux subtracted in 200 components = 8.0519e-05 Jy ! Clean residual min=-0.001786 max=0.002179 Jy/beam ! Clean residual mean=-0.000001 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0526661 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0526661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082337Jy sigma=0.000634 ! Fit after self-cal, rms=0.082336Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082336Jy sigma=0.000634 ! Fit after self-cal, rms=0.082550Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.276 mas, bmaj=15.96 mas, bpa=64.52 degrees ! Estimated noise=575.587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622571 Jy ! Component: 100 - total flux cleaned = 0.000843698 Jy ! Component: 150 - total flux cleaned = 0.000864542 Jy ! Component: 200 - total flux cleaned = 0.000882312 Jy ! Total flux subtracted in 200 components = 0.000882312 Jy ! Clean residual min=-0.002435 max=0.002797 Jy/beam ! Clean residual mean=-0.000001 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.0535484 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.0535484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082548Jy sigma=0.000634 ! Fit after self-cal, rms=0.082544Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.19763e-05 Jy ! Component: 100 - total flux cleaned = 0.000109722 Jy ! Component: 150 - total flux cleaned = 0.000119766 Jy ! Component: 200 - total flux cleaned = 0.000119581 Jy ! Total flux subtracted in 200 components = 0.000119581 Jy ! Clean residual min=-0.002447 max=0.002804 Jy/beam ! Clean residual mean=-0.000001 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.053668 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.053668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082544Jy sigma=0.000634 ! Fit after self-cal, rms=0.082544Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=10.72 mas, bpa=85.36 degrees ! Estimated noise=502.775 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.259 x 10.72 at 85.36 degrees (North through East) ! Clean map min=-0.0017522 max=0.050039 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=9.694 mas, bpa=-88.94 degrees ! Estimated noise=1204.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0376553 Jy ! Component: 100 - total flux cleaned = 0.0462726 Jy ! Component: 150 - total flux cleaned = 0.0496598 Jy ! Component: 200 - total flux cleaned = 0.0511998 Jy ! Total flux subtracted in 200 components = 0.0511998 Jy ! Clean residual min=-0.004205 max=0.003620 Jy/beam ! Clean residual mean=-0.000001 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.0511998 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0511998 Jy ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=10.72 mas, bpa=85.36 degrees ! Estimated noise=502.775 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015829 Jy ! Component: 100 - total flux cleaned = 0.00168974 Jy ! Component: 150 - total flux cleaned = 0.00186818 Jy ! Component: 200 - total flux cleaned = 0.00196856 Jy ! Total flux subtracted in 200 components = 0.00196856 Jy ! Clean residual min=-0.001900 max=0.002272 Jy/beam ! Clean residual mean=-0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0531683 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0531683 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.276 mas, bmaj=15.96 mas, bpa=64.52 degrees ! Estimated noise=575.587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470508 Jy ! Component: 100 - total flux cleaned = 0.000537254 Jy ! Component: 150 - total flux cleaned = 0.000578122 Jy ! Component: 200 - total flux cleaned = 0.000601616 Jy ! Total flux subtracted in 200 components = 0.000601616 Jy ! Clean residual min=-0.002437 max=0.002831 Jy/beam ! Clean residual mean=-0.000001 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.05377 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.84048e-07 Jy ! Component: 100 - total flux cleaned = 9.16081e-06 Jy ! Component: 150 - total flux cleaned = 9.25072e-06 Jy ! Component: 200 - total flux cleaned = 1.72719e-05 Jy ! Total flux subtracted in 200 components = 1.72719e-05 Jy ! Clean residual min=-0.002442 max=0.002829 Jy/beam ! Clean residual mean=-0.000001 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.0537872 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.0537872 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=10.72 mas, bpa=85.36 degrees ! Estimated noise=502.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179003 Jy ! Component: 100 - total flux cleaned = -0.000192282 Jy ! Component: 150 - total flux cleaned = -0.000204373 Jy ! Component: 200 - total flux cleaned = -0.00021637 Jy ! Total flux subtracted in 200 components = -0.00021637 Jy ! Clean residual min=-0.001833 max=0.002314 Jy/beam ! Clean residual mean=-0.000000 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0535709 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.0535709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082547Jy sigma=0.000634 ! Fit after self-cal, rms=0.082537Jy sigma=0.000634 wmodel J1005+4805_S_2017_04_28_pus_map.mod ! Writing 54 model components to file: J1005+4805_S_2017_04_28_pus_map.mod wobs J1005+4805_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1005+4805_S_2017_04_28_pus_uvs.fits wwins J1005+4805_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J1005+4805_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090032 Jy ! Component: 100 - total flux cleaned = 0.000902147 Jy ! Component: 150 - total flux cleaned = 0.000757128 Jy ! Component: 200 - total flux cleaned = 0.000702808 Jy ! Component: 250 - total flux cleaned = 0.00067647 Jy ! Component: 300 - total flux cleaned = 0.000699101 Jy ! Component: 350 - total flux cleaned = 0.000698474 Jy ! Component: 400 - total flux cleaned = 0.000739129 Jy ! Component: 450 - total flux cleaned = 0.000798233 Jy ! Component: 500 - total flux cleaned = 0.000817121 Jy ! Component: 550 - total flux cleaned = 0.000853241 Jy ! Component: 600 - total flux cleaned = 0.000869962 Jy ! Component: 650 - total flux cleaned = 0.000934554 Jy ! Component: 700 - total flux cleaned = 0.00091913 Jy ! Component: 750 - total flux cleaned = 0.000934338 Jy ! Component: 800 - total flux cleaned = 0.000949062 Jy ! Component: 850 - total flux cleaned = 0.000935765 Jy ! Component: 900 - total flux cleaned = 0.000922542 Jy ! Component: 950 - total flux cleaned = 0.000922732 Jy ! Component: 1000 - total flux cleaned = 0.000960592 Jy ! Component: 1050 - total flux cleaned = 0.00099732 Jy ! Component: 1100 - total flux cleaned = 0.00105639 Jy ! Component: 1150 - total flux cleaned = 0.00110221 Jy ! Component: 1200 - total flux cleaned = 0.00110227 Jy ! Component: 1250 - total flux cleaned = 0.00114631 Jy ! Component: 1300 - total flux cleaned = 0.00118917 Jy ! Component: 1350 - total flux cleaned = 0.00120994 Jy ! Component: 1400 - total flux cleaned = 0.00124057 Jy ! Component: 1450 - total flux cleaned = 0.00127058 Jy ! Component: 1500 - total flux cleaned = 0.00130998 Jy ! Component: 1550 - total flux cleaned = 0.00134849 Jy ! Component: 1600 - total flux cleaned = 0.00138626 Jy ! Component: 1650 - total flux cleaned = 0.00146042 Jy ! Component: 1700 - total flux cleaned = 0.0015332 Jy ! Component: 1750 - total flux cleaned = 0.00157806 Jy ! Component: 1800 - total flux cleaned = 0.00164001 Jy ! Component: 1850 - total flux cleaned = 0.00168369 Jy ! Component: 1900 - total flux cleaned = 0.00174381 Jy ! Component: 1950 - total flux cleaned = 0.00180299 Jy ! Component: 2000 - total flux cleaned = 0.0018448 Jy ! Component: 2050 - total flux cleaned = 0.00188593 Jy ! Component: 2100 - total flux cleaned = 0.00194274 Jy ! Component: 2150 - total flux cleaned = 0.00200693 Jy ! Component: 2200 - total flux cleaned = 0.00206233 Jy ! Component: 2250 - total flux cleaned = 0.00208582 Jy ! Component: 2300 - total flux cleaned = 0.0021322 Jy ! Component: 2350 - total flux cleaned = 0.0021551 Jy ! Component: 2400 - total flux cleaned = 0.00220048 Jy ! Component: 2450 - total flux cleaned = 0.00222286 Jy ! Component: 2500 - total flux cleaned = 0.00223775 Jy ! Component: 2550 - total flux cleaned = 0.00226712 Jy ! Component: 2600 - total flux cleaned = 0.00230366 Jy ! Component: 2650 - total flux cleaned = 0.00234699 Jy ! Component: 2700 - total flux cleaned = 0.0023828 Jy ! Component: 2750 - total flux cleaned = 0.00241124 Jy ! Component: 2800 - total flux cleaned = 0.00245358 Jy ! Component: 2850 - total flux cleaned = 0.0024816 Jy ! Component: 2900 - total flux cleaned = 0.00251641 Jy ! Component: 2950 - total flux cleaned = 0.00256479 Jy ! Component: 3000 - total flux cleaned = 0.00260592 Jy ! Component: 3050 - total flux cleaned = 0.00261276 Jy ! Component: 3100 - total flux cleaned = 0.00265348 Jy ! Component: 3150 - total flux cleaned = 0.00269387 Jy ! Component: 3200 - total flux cleaned = 0.00272065 Jy ! Component: 3250 - total flux cleaned = 0.00276724 Jy ! Component: 3300 - total flux cleaned = 0.00282019 Jy ! Component: 3350 - total flux cleaned = 0.00285307 Jy ! Component: 3400 - total flux cleaned = 0.00288587 Jy ! Component: 3450 - total flux cleaned = 0.00293157 Jy ! Component: 3500 - total flux cleaned = 0.00295755 Jy ! Component: 3550 - total flux cleaned = 0.00300283 Jy ! Component: 3600 - total flux cleaned = 0.00304144 Jy ! Component: 3650 - total flux cleaned = 0.00306069 Jy ! Component: 3700 - total flux cleaned = 0.00310539 Jy ! Component: 3750 - total flux cleaned = 0.00313082 Jy ! Component: 3800 - total flux cleaned = 0.00315618 Jy ! Component: 3850 - total flux cleaned = 0.00320038 Jy ! Component: 3900 - total flux cleaned = 0.00323188 Jy ! Component: 3950 - total flux cleaned = 0.00326948 Jy ! Component: 4000 - total flux cleaned = 0.00329452 Jy ! Component: 4050 - total flux cleaned = 0.00332564 Jy ! Total flux subtracted in 4096 components = 0.0033691 Jy ! Clean residual min=-0.000369 max=0.000446 Jy/beam ! Clean residual mean=0.000002 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.05694 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 363 components and 0.0569399 Jy ![Exited script file: muppet] wmap "J1005+4805_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.259 x 10.72 at 85.36 degrees (North through East) ! Clean map min=-0.00081406 max=0.049781 Jy/beam ! Writing clean map to FITS file: J1005+4805_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0497813 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00010093 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.608243 0.608243 1.21649 2.43297 4.86595 9.73189 19.4638 38.9276 77.8551 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.259 x 10.72 at 85.36 degrees (North through East) ! Clean map min=-0.00081406 max=0.049781 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1005+4805_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:22:51 2019