! Started logfile: J1002+1232_S_2017_08_12_pus_uvs.log on Fri May 10 14:57:32 2019 obs J1002+1232_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1002+1232_S_2017_08_12_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.899415 visibilities/baseline/integration-bin. ! Found source: J1002+1232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 18456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1002+1232_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 801 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.967572Jy sigma=0.008659 ! Fit after self-cal, rms=0.935035Jy sigma=0.008402 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=6.653 mas, bpa=-0.8669 degrees ! Estimated noise=1056.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518553 Jy ! Component: 100 - total flux cleaned = 0.0650432 Jy ! Total flux subtracted in 100 components = 0.0650432 Jy ! Clean residual min=-0.003997 max=0.005227 Jy/beam ! Clean residual mean=-0.000011 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.0650432 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0650432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081386Jy sigma=0.000672 ! Fit after self-cal, rms=0.081311Jy sigma=0.000671 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=7.5 mas, bpa=-1.915 degrees ! Estimated noise=698.174 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00640337 Jy ! Component: 100 - total flux cleaned = 0.00946376 Jy ! Component: 150 - total flux cleaned = 0.0111067 Jy ! Component: 200 - total flux cleaned = 0.012005 Jy ! Total flux subtracted in 200 components = 0.012005 Jy ! Clean residual min=-0.002170 max=0.002016 Jy/beam ! Clean residual mean=-0.000004 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0770482 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.0770482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080842Jy sigma=0.000667 ! Fit after self-cal, rms=0.080849Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.97 KP 1.05 ! LA 0.99 MK 1.03 NL 0.87 OV 1.01 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.02 KP 1.01 ! LA 0.98 MK 1.22 NL 1.04 OV 1.05 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.99 KP 1.03 ! LA 0.93 MK 1.02 NL 1.02 OV 0.96 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! A total of 99 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.70 KP 1.00* ! LA 1.00* MK 0.88 NL 1.00* OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.080849Jy sigma=0.000667 ! Fit after self-cal, rms=0.080928Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=7.552 mas, bpa=-1.401 degrees ! Estimated noise=702.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.89749e-05 Jy ! Component: 100 - total flux cleaned = 4.16977e-05 Jy ! Component: 150 - total flux cleaned = 4.26014e-05 Jy ! Component: 200 - total flux cleaned = 5.9361e-05 Jy ! Total flux subtracted in 200 components = 5.9361e-05 Jy ! Clean residual min=-0.002440 max=0.001917 Jy/beam ! Clean residual mean=-0.000003 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0771075 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.0771076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080914Jy sigma=0.000665 ! Fit after self-cal, rms=0.080921Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080921Jy sigma=0.000665 ! Fit after self-cal, rms=0.081468Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=7.575 mas, bpa=-1.393 degrees ! Estimated noise=704.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100994 Jy ! Component: 100 - total flux cleaned = 0.000147289 Jy ! Component: 150 - total flux cleaned = 0.000171888 Jy ! Component: 200 - total flux cleaned = 0.000192611 Jy ! Total flux subtracted in 200 components = 0.000192611 Jy ! Clean residual min=-0.002249 max=0.001804 Jy/beam ! Clean residual mean=0.000001 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0773002 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0773002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081463Jy sigma=0.000664 ! Fit after self-cal, rms=0.081490Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110891 Jy ! Component: 100 - total flux cleaned = -8.05957e-05 Jy ! Component: 150 - total flux cleaned = -6.28174e-05 Jy ! Component: 200 - total flux cleaned = -6.25623e-05 Jy ! Total flux subtracted in 200 components = -6.25623e-05 Jy ! Clean residual min=-0.002278 max=0.001752 Jy/beam ! Clean residual mean=0.000000 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0772376 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.0772376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081487Jy sigma=0.000664 ! Fit after self-cal, rms=0.081480Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081480Jy sigma=0.000664 ! Fit after self-cal, rms=0.081847Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=7.565 mas, bpa=-1.396 degrees ! Estimated noise=704.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.71568e-05 Jy ! Component: 100 - total flux cleaned = 8.45608e-05 Jy ! Component: 150 - total flux cleaned = 0.000100091 Jy ! Component: 200 - total flux cleaned = 0.000114177 Jy ! Total flux subtracted in 200 components = 0.000114177 Jy ! Clean residual min=-0.002011 max=0.001782 Jy/beam ! Clean residual mean=0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0773518 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.0773518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081844Jy sigma=0.000663 ! Fit after self-cal, rms=0.081854Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.70079e-05 Jy ! Component: 100 - total flux cleaned = -4.77979e-05 Jy ! Component: 150 - total flux cleaned = -4.80427e-05 Jy ! Component: 200 - total flux cleaned = -4.23121e-05 Jy ! Total flux subtracted in 200 components = -4.23121e-05 Jy ! Clean residual min=-0.002011 max=0.001768 Jy/beam ! Clean residual mean=0.000001 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.0773095 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.0773095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081852Jy sigma=0.000663 ! Fit after self-cal, rms=0.081852Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081852Jy sigma=0.000663 ! Fit after self-cal, rms=0.081906Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.308 mas, bmaj=11.5 mas, bpa=-7.265 degrees ! Estimated noise=886.036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012924 Jy ! Component: 100 - total flux cleaned = 0.000152434 Jy ! Component: 150 - total flux cleaned = 0.000172455 Jy ! Component: 200 - total flux cleaned = 0.000190357 Jy ! Total flux subtracted in 200 components = 0.000190357 Jy ! Clean residual min=-0.002195 max=0.001926 Jy/beam ! Clean residual mean=0.000003 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0774998 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.0774998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081908Jy sigma=0.000663 ! Fit after self-cal, rms=0.081909Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21448e-05 Jy ! Component: 100 - total flux cleaned = 4.88097e-05 Jy ! Component: 150 - total flux cleaned = 6.4433e-05 Jy ! Component: 200 - total flux cleaned = 7.91915e-05 Jy ! Total flux subtracted in 200 components = 7.91915e-05 Jy ! Clean residual min=-0.002208 max=0.001927 Jy/beam ! Clean residual mean=0.000003 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.077579 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.077579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081910Jy sigma=0.000663 ! Fit after self-cal, rms=0.081910Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=7.552 mas, bpa=-1.345 degrees ! Estimated noise=705.028 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.33 x 7.552 at -1.345 degrees (North through East) ! Clean map min=-0.0019196 max=0.068139 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=6.719 mas, bpa=-0.4942 degrees ! Estimated noise=1059.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514324 Jy ! Component: 100 - total flux cleaned = 0.064916 Jy ! Component: 150 - total flux cleaned = 0.070909 Jy ! Component: 200 - total flux cleaned = 0.0738972 Jy ! Total flux subtracted in 200 components = 0.0738972 Jy ! Clean residual min=-0.003019 max=0.002929 Jy/beam ! Clean residual mean=-0.000003 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0738972 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0738972 Jy ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=7.552 mas, bpa=-1.345 degrees ! Estimated noise=705.028 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021691 Jy ! Component: 100 - total flux cleaned = 0.00263614 Jy ! Component: 150 - total flux cleaned = 0.00290118 Jy ! Component: 200 - total flux cleaned = 0.00307657 Jy ! Total flux subtracted in 200 components = 0.00307657 Jy ! Clean residual min=-0.002067 max=0.001745 Jy/beam ! Clean residual mean=0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0769738 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.0769738 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.308 mas, bmaj=11.5 mas, bpa=-7.265 degrees ! Estimated noise=886.036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568325 Jy ! Component: 100 - total flux cleaned = 0.000628248 Jy ! Component: 150 - total flux cleaned = 0.00066542 Jy ! Component: 200 - total flux cleaned = 0.000686836 Jy ! Total flux subtracted in 200 components = 0.000686836 Jy ! Clean residual min=-0.002214 max=0.001917 Jy/beam ! Clean residual mean=0.000003 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0776606 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.58436e-06 Jy ! Component: 100 - total flux cleaned = -9.58855e-06 Jy ! Component: 150 - total flux cleaned = -1.81842e-05 Jy ! Component: 200 - total flux cleaned = -1.86323e-05 Jy ! Total flux subtracted in 200 components = -1.86323e-05 Jy ! Clean residual min=-0.002219 max=0.001916 Jy/beam ! Clean residual mean=0.000003 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.077642 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.077642 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=7.552 mas, bpa=-1.345 degrees ! Estimated noise=705.028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.54291e-07 Jy ! Component: 100 - total flux cleaned = 3.79802e-07 Jy ! Component: 150 - total flux cleaned = -1.40817e-05 Jy ! Component: 200 - total flux cleaned = -2.62862e-05 Jy ! Total flux subtracted in 200 components = -2.62862e-05 Jy ! Clean residual min=-0.002027 max=0.001789 Jy/beam ! Clean residual mean=0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0776157 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.0776157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081913Jy sigma=0.000663 ! Fit after self-cal, rms=0.081915Jy sigma=0.000663 wmodel J1002+1232_S_2017_08_12_pus_map.mod ! Writing 49 model components to file: J1002+1232_S_2017_08_12_pus_map.mod wobs J1002+1232_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1002+1232_S_2017_08_12_pus_uvs.fits wwins J1002+1232_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1002+1232_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000657727 Jy ! Component: 100 - total flux cleaned = -0.00106748 Jy ! Component: 150 - total flux cleaned = -0.00121347 Jy ! Component: 200 - total flux cleaned = -0.00135012 Jy ! Component: 250 - total flux cleaned = -0.00142961 Jy ! Component: 300 - total flux cleaned = -0.00158486 Jy ! Component: 350 - total flux cleaned = -0.00168597 Jy ! Component: 400 - total flux cleaned = -0.00173555 Jy ! Component: 450 - total flux cleaned = -0.00183188 Jy ! Component: 500 - total flux cleaned = -0.00190272 Jy ! Component: 550 - total flux cleaned = -0.0019948 Jy ! Component: 600 - total flux cleaned = -0.0021066 Jy ! Component: 650 - total flux cleaned = -0.00204029 Jy ! Component: 700 - total flux cleaned = -0.00201809 Jy ! Component: 750 - total flux cleaned = -0.00201753 Jy ! Component: 800 - total flux cleaned = -0.00201762 Jy ! Component: 850 - total flux cleaned = -0.00199717 Jy ! Component: 900 - total flux cleaned = -0.00199727 Jy ! Component: 950 - total flux cleaned = -0.00197708 Jy ! Component: 1000 - total flux cleaned = -0.00191749 Jy ! Component: 1050 - total flux cleaned = -0.0018982 Jy ! Component: 1100 - total flux cleaned = -0.00182079 Jy ! Component: 1150 - total flux cleaned = -0.00176351 Jy ! Component: 1200 - total flux cleaned = -0.00176333 Jy ! Component: 1250 - total flux cleaned = -0.00168825 Jy ! Component: 1300 - total flux cleaned = -0.00165107 Jy ! Component: 1350 - total flux cleaned = -0.00159597 Jy ! Component: 1400 - total flux cleaned = -0.00150527 Jy ! Component: 1450 - total flux cleaned = -0.00148731 Jy ! Component: 1500 - total flux cleaned = -0.0013986 Jy ! Component: 1550 - total flux cleaned = -0.00132874 Jy ! Component: 1600 - total flux cleaned = -0.00127678 Jy ! Component: 1650 - total flux cleaned = -0.00119094 Jy ! Component: 1700 - total flux cleaned = -0.00112306 Jy ! Component: 1750 - total flux cleaned = -0.00105558 Jy ! Component: 1800 - total flux cleaned = -0.00100561 Jy ! Component: 1850 - total flux cleaned = -0.000955846 Jy ! Component: 1900 - total flux cleaned = -0.000890515 Jy ! Component: 1950 - total flux cleaned = -0.000841868 Jy ! Component: 2000 - total flux cleaned = -0.000825765 Jy ! Component: 2050 - total flux cleaned = -0.00077782 Jy ! Component: 2100 - total flux cleaned = -0.000699176 Jy ! Component: 2150 - total flux cleaned = -0.000683536 Jy ! Component: 2200 - total flux cleaned = -0.00065246 Jy ! Component: 2250 - total flux cleaned = -0.000606497 Jy ! Component: 2300 - total flux cleaned = -0.000606543 Jy ! Component: 2350 - total flux cleaned = -0.000561342 Jy ! Component: 2400 - total flux cleaned = -0.000561246 Jy ! Component: 2450 - total flux cleaned = -0.000560976 Jy ! Component: 2500 - total flux cleaned = -0.000501984 Jy ! Component: 2550 - total flux cleaned = -0.000458098 Jy ! Component: 2600 - total flux cleaned = -0.000501712 Jy ! Component: 2650 - total flux cleaned = -0.000444255 Jy ! Component: 2700 - total flux cleaned = -0.00048727 Jy ! Component: 2750 - total flux cleaned = -0.00051567 Jy ! Component: 2800 - total flux cleaned = -0.000515542 Jy ! Component: 2850 - total flux cleaned = -0.000529448 Jy ! Component: 2900 - total flux cleaned = -0.00054326 Jy ! Component: 2950 - total flux cleaned = -0.000543374 Jy ! Component: 3000 - total flux cleaned = -0.000543455 Jy ! Component: 3050 - total flux cleaned = -0.000584039 Jy ! Component: 3100 - total flux cleaned = -0.000570468 Jy ! Component: 3150 - total flux cleaned = -0.0005704 Jy ! Component: 3200 - total flux cleaned = -0.000557228 Jy ! Component: 3250 - total flux cleaned = -0.00058366 Jy ! Component: 3300 - total flux cleaned = -0.000609881 Jy ! Component: 3350 - total flux cleaned = -0.000622936 Jy ! Component: 3400 - total flux cleaned = -0.000661643 Jy ! Component: 3450 - total flux cleaned = -0.000661572 Jy ! Component: 3500 - total flux cleaned = -0.000674272 Jy ! Component: 3550 - total flux cleaned = -0.000712419 Jy ! Component: 3600 - total flux cleaned = -0.000737488 Jy ! Component: 3650 - total flux cleaned = -0.000774909 Jy ! Component: 3700 - total flux cleaned = -0.000787245 Jy ! Component: 3750 - total flux cleaned = -0.000799544 Jy ! Component: 3800 - total flux cleaned = -0.000873096 Jy ! Component: 3850 - total flux cleaned = -0.000873079 Jy ! Component: 3900 - total flux cleaned = -0.000921506 Jy ! Component: 3950 - total flux cleaned = -0.000933529 Jy ! Component: 4000 - total flux cleaned = -0.000981307 Jy ! Component: 4050 - total flux cleaned = -0.00100506 Jy ! Total flux subtracted in 4096 components = -0.00102866 Jy ! Clean residual min=-0.000753 max=0.000672 Jy/beam ! Clean residual mean=-0.000003 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0765871 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 341 components and 0.076587 Jy ![Exited script file: muppet] wmap "J1002+1232_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.33 x 7.552 at -1.345 degrees (North through East) ! Clean map min=-0.001781 max=0.06795 Jy/beam ! Writing clean map to FITS file: J1002+1232_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0679502 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216469 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.955711 0.955711 1.91142 3.82284 7.64569 15.2914 30.5827 61.1655 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.33 x 7.552 at -1.345 degrees (North through East) ! Clean map min=-0.001781 max=0.06795 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1002+1232_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:57:37 2019