! Started logfile: J1001-4438_S_2017_04_28_pus_uvs.log on Thu May 2 16:22:41 2019 obs J1001-4438_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1001-4438_S_2017_04_28_pus_uva.fits ! AN table 1: 77 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.615007 visibilities/baseline/integration-bin. ! Found source: J1001-4438 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 8524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1001-4438_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 493 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945834Jy sigma=0.023866 ! Fit after self-cal, rms=0.875460Jy sigma=0.023764 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.245 mas, bmaj=7.461 mas, bpa=-14.36 degrees ! Estimated noise=2905.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573541 Jy ! Component: 100 - total flux cleaned = 0.0865735 Jy ! Total flux subtracted in 100 components = 0.0865735 Jy ! Clean residual min=-0.021789 max=0.020136 Jy/beam ! Clean residual mean=0.000293 rms=0.006558 Jy/beam ! Combined flux in latest and established models = 0.0865735 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0865735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188462Jy sigma=0.001897 ! Fit after self-cal, rms=0.187952Jy sigma=0.001894 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=9.348 mas, bpa=-11.26 degrees ! Estimated noise=1080.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228488 Jy ! Component: 100 - total flux cleaned = 0.0314429 Jy ! Component: 150 - total flux cleaned = 0.0336445 Jy ! Component: 200 - total flux cleaned = 0.0336411 Jy ! Total flux subtracted in 200 components = 0.0336411 Jy ! Clean residual min=-0.035194 max=0.034322 Jy/beam ! Clean residual mean=0.001346 rms=0.014000 Jy/beam ! Combined flux in latest and established models = 0.120215 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 30 components and 0.120215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176511Jy sigma=0.002504 ! Fit after self-cal, rms=0.176439Jy sigma=0.002504 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.73 HN 1.00* KP 0.65 ! LA 0.61 MK 0.89 NL 1.27 OV 0.79 ! PT 0.68 SC 1.48 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.66 HN 1.00* KP 0.62 ! LA 0.61 MK 0.86 NL 1.42 OV 0.81 ! PT 0.67 SC 1.37 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.69 HN 1.00* KP 0.62 ! LA 0.61 MK 0.85 NL 1.28 OV 0.73 ! PT 0.69 SC 1.42 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.76 HN 1.00* KP 1.00* ! LA 24.06 MK 1.40 NL 1.00* OV 1.00* ! PT 0.72 SC 1.00* ! ! ! Fit before self-cal, rms=0.176439Jy sigma=0.002504 ! Fit after self-cal, rms=0.150254Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.293 mas, bmaj=9.394 mas, bpa=-9.766 degrees ! Estimated noise=1106.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171977 Jy ! Component: 100 - total flux cleaned = 0.00166116 Jy ! Component: 150 - total flux cleaned = 0.00166079 Jy ! Component: 200 - total flux cleaned = 0.00171465 Jy ! Total flux subtracted in 200 components = 0.00171465 Jy ! Clean residual min=-0.004316 max=0.005215 Jy/beam ! Clean residual mean=0.000005 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.121929 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.121929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150153Jy sigma=0.000659 ! Fit after self-cal, rms=0.151390Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151390Jy sigma=0.000653 ! Fit after self-cal, rms=0.152115Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=9.414 mas, bpa=-12 degrees ! Estimated noise=1073.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155776 Jy ! Component: 100 - total flux cleaned = 0.00149496 Jy ! Component: 150 - total flux cleaned = 0.00152666 Jy ! Component: 200 - total flux cleaned = 0.00155629 Jy ! Total flux subtracted in 200 components = 0.00155629 Jy ! Clean residual min=-0.003347 max=0.004985 Jy/beam ! Clean residual mean=0.000001 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.123486 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.123486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152055Jy sigma=0.000651 ! Fit after self-cal, rms=0.152050Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194977 Jy ! Component: 100 - total flux cleaned = 8.09831e-05 Jy ! Component: 150 - total flux cleaned = 8.16261e-05 Jy ! Component: 200 - total flux cleaned = 0.000147451 Jy ! Total flux subtracted in 200 components = 0.000147451 Jy ! Clean residual min=-0.003353 max=0.005085 Jy/beam ! Clean residual mean=0.000003 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.123633 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.123633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152010Jy sigma=0.000651 ! Fit after self-cal, rms=0.152020Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152020Jy sigma=0.000651 ! Fit after self-cal, rms=0.149952Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=9.35 mas, bpa=-12.27 degrees ! Estimated noise=1065.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138673 Jy ! Component: 100 - total flux cleaned = 0.00144437 Jy ! Component: 150 - total flux cleaned = 0.00149978 Jy ! Component: 200 - total flux cleaned = 0.00152608 Jy ! Total flux subtracted in 200 components = 0.00152608 Jy ! Clean residual min=-0.003289 max=0.004904 Jy/beam ! Clean residual mean=0.000000 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.125159 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.125159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149897Jy sigma=0.000651 ! Fit after self-cal, rms=0.149912Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178701 Jy ! Component: 100 - total flux cleaned = 8.4139e-05 Jy ! Component: 150 - total flux cleaned = 8.3366e-05 Jy ! Component: 200 - total flux cleaned = 0.000111407 Jy ! Total flux subtracted in 200 components = 0.000111407 Jy ! Clean residual min=-0.003369 max=0.004928 Jy/beam ! Clean residual mean=0.000001 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.125271 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.125271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149881Jy sigma=0.000651 ! Fit after self-cal, rms=0.149861Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149861Jy sigma=0.000651 ! Fit after self-cal, rms=0.149163Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.44 mas, bmaj=36.78 mas, bpa=-4.906 degrees ! Estimated noise=1223.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016014 Jy ! Component: 100 - total flux cleaned = 0.00191066 Jy ! Component: 150 - total flux cleaned = 0.00192832 Jy ! Component: 200 - total flux cleaned = 0.00194583 Jy ! Total flux subtracted in 200 components = 0.00194583 Jy ! Clean residual min=-0.003627 max=0.005435 Jy/beam ! Clean residual mean=0.000004 rms=0.001666 Jy/beam ! Combined flux in latest and established models = 0.127216 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.127216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149128Jy sigma=0.000651 ! Fit after self-cal, rms=0.149104Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.67962e-05 Jy ! Component: 100 - total flux cleaned = 3.44797e-05 Jy ! Component: 150 - total flux cleaned = 5.17331e-05 Jy ! Component: 200 - total flux cleaned = 6.86097e-05 Jy ! Total flux subtracted in 200 components = 6.86097e-05 Jy ! Clean residual min=-0.003608 max=0.005387 Jy/beam ! Clean residual mean=0.000005 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 0.127285 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 60 components and 0.127285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149095Jy sigma=0.000651 ! Fit after self-cal, rms=0.149090Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=9.321 mas, bpa=-12.58 degrees ! Estimated noise=1062.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 9.321 at -12.58 degrees (North through East) ! Clean map min=-0.0033438 max=0.087018 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.304 mas, bmaj=7.775 mas, bpa=-14.78 degrees ! Estimated noise=2757.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0548074 Jy ! Component: 100 - total flux cleaned = 0.0838176 Jy ! Component: 150 - total flux cleaned = 0.101336 Jy ! Component: 200 - total flux cleaned = 0.112103 Jy ! Total flux subtracted in 200 components = 0.112103 Jy ! Clean residual min=-0.006108 max=0.007635 Jy/beam ! Clean residual mean=-0.000040 rms=0.001886 Jy/beam ! Combined flux in latest and established models = 0.112103 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.112103 Jy ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=9.321 mas, bpa=-12.58 degrees ! Estimated noise=1062.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00908364 Jy ! Component: 100 - total flux cleaned = 0.0127938 Jy ! Component: 150 - total flux cleaned = 0.0144927 Jy ! Component: 200 - total flux cleaned = 0.0147389 Jy ! Total flux subtracted in 200 components = 0.0147389 Jy ! Clean residual min=-0.003292 max=0.004692 Jy/beam ! Clean residual mean=-0.000001 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.126841 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.126841 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.44 mas, bmaj=36.78 mas, bpa=-4.906 degrees ! Estimated noise=1223.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863479 Jy ! Component: 100 - total flux cleaned = 0.000882675 Jy ! Component: 150 - total flux cleaned = 0.000919922 Jy ! Component: 200 - total flux cleaned = 0.000937611 Jy ! Total flux subtracted in 200 components = 0.000937611 Jy ! Clean residual min=-0.003543 max=0.005271 Jy/beam ! Clean residual mean=0.000012 rms=0.001633 Jy/beam ! Combined flux in latest and established models = 0.127779 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.72576e-05 Jy ! Component: 100 - total flux cleaned = 3.46448e-05 Jy ! Component: 150 - total flux cleaned = 6.6611e-05 Jy ! Component: 200 - total flux cleaned = 8.27948e-05 Jy ! Total flux subtracted in 200 components = 8.27948e-05 Jy ! Clean residual min=-0.003546 max=0.005227 Jy/beam ! Clean residual mean=0.000013 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.127862 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 40 components and 0.127862 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=9.321 mas, bpa=-12.58 degrees ! Estimated noise=1062.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.61578e-06 Jy ! Component: 100 - total flux cleaned = -9.15576e-05 Jy ! Component: 150 - total flux cleaned = -0.000127726 Jy ! Component: 200 - total flux cleaned = -0.000161802 Jy ! Total flux subtracted in 200 components = -0.000161802 Jy ! Clean residual min=-0.003254 max=0.004460 Jy/beam ! Clean residual mean=0.000007 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.1277 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.1277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149032Jy sigma=0.000650 ! Fit after self-cal, rms=0.149042Jy sigma=0.000650 wmodel J1001-4438_S_2017_04_28_pus_map.mod ! Writing 44 model components to file: J1001-4438_S_2017_04_28_pus_map.mod wobs J1001-4438_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1001-4438_S_2017_04_28_pus_uvs.fits wwins J1001-4438_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J1001-4438_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195253 Jy ! Component: 100 - total flux cleaned = 0.00314097 Jy ! Component: 150 - total flux cleaned = 0.00353319 Jy ! Component: 200 - total flux cleaned = 0.00384009 Jy ! Component: 250 - total flux cleaned = 0.00431242 Jy ! Component: 300 - total flux cleaned = 0.00461789 Jy ! Component: 350 - total flux cleaned = 0.00478202 Jy ! Component: 400 - total flux cleaned = 0.0050148 Jy ! Component: 450 - total flux cleaned = 0.00523783 Jy ! Component: 500 - total flux cleaned = 0.00548749 Jy ! Component: 550 - total flux cleaned = 0.00559056 Jy ! Component: 600 - total flux cleaned = 0.00562469 Jy ! Component: 650 - total flux cleaned = 0.00578631 Jy ! Component: 700 - total flux cleaned = 0.00587994 Jy ! Component: 750 - total flux cleaned = 0.00597093 Jy ! Component: 800 - total flux cleaned = 0.00603066 Jy ! Component: 850 - total flux cleaned = 0.00617504 Jy ! Component: 900 - total flux cleaned = 0.00628773 Jy ! Component: 950 - total flux cleaned = 0.00639828 Jy ! Component: 1000 - total flux cleaned = 0.00650657 Jy ! Component: 1050 - total flux cleaned = 0.00658606 Jy ! Component: 1100 - total flux cleaned = 0.00666302 Jy ! Component: 1150 - total flux cleaned = 0.00666315 Jy ! Component: 1200 - total flux cleaned = 0.00668852 Jy ! Component: 1250 - total flux cleaned = 0.00668888 Jy ! Component: 1300 - total flux cleaned = 0.00676115 Jy ! Component: 1350 - total flux cleaned = 0.00671362 Jy ! Component: 1400 - total flux cleaned = 0.00671394 Jy ! Component: 1450 - total flux cleaned = 0.00669141 Jy ! Component: 1500 - total flux cleaned = 0.00660083 Jy ! Component: 1550 - total flux cleaned = 0.00653378 Jy ! Component: 1600 - total flux cleaned = 0.00644533 Jy ! Component: 1650 - total flux cleaned = 0.0063575 Jy ! Component: 1700 - total flux cleaned = 0.00627053 Jy ! Component: 1750 - total flux cleaned = 0.00614119 Jy ! Component: 1800 - total flux cleaned = 0.00605598 Jy ! Component: 1850 - total flux cleaned = 0.00597141 Jy ! Component: 1900 - total flux cleaned = 0.00592958 Jy ! Component: 1950 - total flux cleaned = 0.00586734 Jy ! Component: 2000 - total flux cleaned = 0.00580543 Jy ! Component: 2050 - total flux cleaned = 0.00576477 Jy ! Component: 2100 - total flux cleaned = 0.00576477 Jy ! Component: 2150 - total flux cleaned = 0.00572446 Jy ! Component: 2200 - total flux cleaned = 0.00568454 Jy ! Component: 2250 - total flux cleaned = 0.00568463 Jy ! Component: 2300 - total flux cleaned = 0.00564493 Jy ! Component: 2350 - total flux cleaned = 0.00558575 Jy ! Component: 2400 - total flux cleaned = 0.00554647 Jy ! Component: 2450 - total flux cleaned = 0.0055465 Jy ! Component: 2500 - total flux cleaned = 0.00548799 Jy ! Component: 2550 - total flux cleaned = 0.00544934 Jy ! Component: 2600 - total flux cleaned = 0.00546877 Jy ! Component: 2650 - total flux cleaned = 0.00544953 Jy ! Component: 2700 - total flux cleaned = 0.00544957 Jy ! Component: 2750 - total flux cleaned = 0.00543042 Jy ! Component: 2800 - total flux cleaned = 0.0054304 Jy ! Component: 2850 - total flux cleaned = 0.00541126 Jy ! Component: 2900 - total flux cleaned = 0.00543049 Jy ! Component: 2950 - total flux cleaned = 0.00546877 Jy ! Component: 3000 - total flux cleaned = 0.00541137 Jy ! Component: 3050 - total flux cleaned = 0.00539223 Jy ! Component: 3100 - total flux cleaned = 0.00535384 Jy ! Component: 3150 - total flux cleaned = 0.00527679 Jy ! Component: 3200 - total flux cleaned = 0.00525751 Jy ! Component: 3250 - total flux cleaned = 0.00523832 Jy ! Component: 3300 - total flux cleaned = 0.00519957 Jy ! Component: 3350 - total flux cleaned = 0.00519967 Jy ! Component: 3400 - total flux cleaned = 0.00518001 Jy ! Component: 3450 - total flux cleaned = 0.00516037 Jy ! Component: 3500 - total flux cleaned = 0.00512097 Jy ! Component: 3550 - total flux cleaned = 0.00508147 Jy ! Component: 3600 - total flux cleaned = 0.0050417 Jy ! Component: 3650 - total flux cleaned = 0.00502184 Jy ! Component: 3700 - total flux cleaned = 0.0050016 Jy ! Component: 3750 - total flux cleaned = 0.00496119 Jy ! Component: 3800 - total flux cleaned = 0.00496122 Jy ! Component: 3850 - total flux cleaned = 0.00496113 Jy ! Component: 3900 - total flux cleaned = 0.0049404 Jy ! Component: 3950 - total flux cleaned = 0.00494022 Jy ! Component: 4000 - total flux cleaned = 0.00491919 Jy ! Component: 4050 - total flux cleaned = 0.00491927 Jy ! Total flux subtracted in 4096 components = 0.00494043 Jy ! Clean residual min=-0.001201 max=0.001289 Jy/beam ! Clean residual mean=0.000037 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.13264 Jy keep ! Adding 208 model components to the UV plane model. ! The established model now contains 252 components and 0.132641 Jy ![Exited script file: muppet] wmap "J1001-4438_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 9.321 at -12.58 degrees (North through East) ! Clean map min=-0.0040439 max=0.083513 Jy/beam ! Writing clean map to FITS file: J1001-4438_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0835133 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000408448 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.46724 1.46724 2.93449 5.86898 11.738 23.4759 46.9518 93.9036 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 9.321 at -12.58 degrees (North through East) ! Clean map min=-0.0040439 max=0.083513 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1001-4438_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:22:45 2019