! Started logfile: J1001+2911_S_2017_02_19_pus_uvs.log on Sat May 4 18:48:21 2019 obs J1001+2911_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1001+2911_S_2017_02_19_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.609722 visibilities/baseline/integration-bin. ! Found source: J1001+2911 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 12292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1001+2911_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 616 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.758876Jy sigma=0.006923 ! Fit after self-cal, rms=0.745963Jy sigma=0.006809 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=7.271 mas, bpa=11.46 degrees ! Estimated noise=1211.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197524 Jy ! Component: 100 - total flux cleaned = 0.240598 Jy ! Total flux subtracted in 100 components = 0.240598 Jy ! Clean residual min=-0.010851 max=0.012084 Jy/beam ! Clean residual mean=-0.000020 rms=0.003194 Jy/beam ! Combined flux in latest and established models = 0.240598 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.240598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097750Jy sigma=0.000810 ! Fit after self-cal, rms=0.097694Jy sigma=0.000810 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=7.495 mas, bpa=11.59 degrees ! Estimated noise=786.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014237 Jy ! Component: 100 - total flux cleaned = 0.0215072 Jy ! Component: 150 - total flux cleaned = 0.0262445 Jy ! Component: 200 - total flux cleaned = 0.0296038 Jy ! Total flux subtracted in 200 components = 0.0296038 Jy ! Clean residual min=-0.009260 max=0.008004 Jy/beam ! Clean residual mean=-0.000019 rms=0.002095 Jy/beam ! Combined flux in latest and established models = 0.270202 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.270202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094880Jy sigma=0.000795 ! Fit after self-cal, rms=0.094854Jy sigma=0.000795 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.87 HN 0.99 KP 1.41 ! LA 1.04 MK 0.98 NL 0.90 OV 1.03 ! PT 1.00* SC 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.02 KP 1.04 ! LA 0.98 MK 1.02 NL 1.06 OV 1.06 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00 HN 0.98 KP 0.88 ! LA 0.78 MK 1.05 NL 1.18 OV 1.00 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.92 KP 1.00* ! LA 0.81 MK 1.13 NL 1.00* OV 1.03 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.094854Jy sigma=0.000795 ! Fit after self-cal, rms=0.090162Jy sigma=0.000731 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.651 mas, bmaj=7.501 mas, bpa=11.56 degrees ! Estimated noise=785.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191904 Jy ! Component: 100 - total flux cleaned = 0.0022007 Jy ! Component: 150 - total flux cleaned = 0.00234297 Jy ! Component: 200 - total flux cleaned = 0.00246508 Jy ! Total flux subtracted in 200 components = 0.00246508 Jy ! Clean residual min=-0.005777 max=0.006677 Jy/beam ! Clean residual mean=0.000004 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.272667 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.272667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090078Jy sigma=0.000730 ! Fit after self-cal, rms=0.090131Jy sigma=0.000730 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090131Jy sigma=0.000730 ! Fit after self-cal, rms=0.098429Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=7.473 mas, bpa=11.78 degrees ! Estimated noise=788.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233984 Jy ! Component: 100 - total flux cleaned = -7.36009e-05 Jy ! Component: 150 - total flux cleaned = -0.000218668 Jy ! Component: 200 - total flux cleaned = -0.000345338 Jy ! Total flux subtracted in 200 components = -0.000345338 Jy ! Clean residual min=-0.002013 max=0.001989 Jy/beam ! Clean residual mean=0.000003 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.272321 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.272321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098402Jy sigma=0.000676 ! Fit after self-cal, rms=0.099040Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162034 Jy ! Component: 100 - total flux cleaned = -0.000220223 Jy ! Component: 150 - total flux cleaned = -0.000272571 Jy ! Component: 200 - total flux cleaned = -0.000336241 Jy ! Total flux subtracted in 200 components = -0.000336241 Jy ! Clean residual min=-0.002018 max=0.001929 Jy/beam ! Clean residual mean=0.000003 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.271985 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.271985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099035Jy sigma=0.000675 ! Fit after self-cal, rms=0.099039Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099039Jy sigma=0.000675 ! Fit after self-cal, rms=0.101708Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=7.473 mas, bpa=11.79 degrees ! Estimated noise=789.254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230401 Jy ! Component: 100 - total flux cleaned = -0.000440505 Jy ! Component: 150 - total flux cleaned = -0.000616015 Jy ! Component: 200 - total flux cleaned = -0.000716412 Jy ! Total flux subtracted in 200 components = -0.000716412 Jy ! Clean residual min=-0.002010 max=0.001903 Jy/beam ! Clean residual mean=0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.271269 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.271269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101701Jy sigma=0.000675 ! Fit after self-cal, rms=0.101730Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114917 Jy ! Component: 100 - total flux cleaned = -0.000180014 Jy ! Component: 150 - total flux cleaned = -0.000214865 Jy ! Component: 200 - total flux cleaned = -0.00024749 Jy ! Total flux subtracted in 200 components = -0.00024749 Jy ! Clean residual min=-0.002031 max=0.001870 Jy/beam ! Clean residual mean=0.000003 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.271021 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.271021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101727Jy sigma=0.000674 ! Fit after self-cal, rms=0.101727Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101727Jy sigma=0.000674 ! Fit after self-cal, rms=0.102007Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.709 mas, bmaj=8.922 mas, bpa=1.255 degrees ! Estimated noise=975.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547656 Jy ! Component: 100 - total flux cleaned = -0.000603547 Jy ! Component: 150 - total flux cleaned = -0.000654571 Jy ! Component: 200 - total flux cleaned = -0.000696816 Jy ! Total flux subtracted in 200 components = -0.000696816 Jy ! Clean residual min=-0.001809 max=0.002051 Jy/beam ! Clean residual mean=0.000005 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.270324 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.270324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102008Jy sigma=0.000674 ! Fit after self-cal, rms=0.102003Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.29921e-05 Jy ! Component: 100 - total flux cleaned = -5.09283e-05 Jy ! Component: 150 - total flux cleaned = -6.38565e-05 Jy ! Component: 200 - total flux cleaned = -7.88022e-05 Jy ! Total flux subtracted in 200 components = -7.88022e-05 Jy ! Clean residual min=-0.001794 max=0.002078 Jy/beam ! Clean residual mean=0.000005 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.270246 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 80 components and 0.270246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102004Jy sigma=0.000674 ! Fit after self-cal, rms=0.102002Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=7.475 mas, bpa=11.8 degrees ! Estimated noise=790.691 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.666 x 7.475 at 11.8 degrees (North through East) ! Clean map min=-0.0019394 max=0.25768 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=7.212 mas, bpa=11.66 degrees ! Estimated noise=1234.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200946 Jy ! Component: 100 - total flux cleaned = 0.244846 Jy ! Component: 150 - total flux cleaned = 0.256451 Jy ! Component: 200 - total flux cleaned = 0.262207 Jy ! Total flux subtracted in 200 components = 0.262207 Jy ! Clean residual min=-0.003895 max=0.003296 Jy/beam ! Clean residual mean=-0.000001 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.262208 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.262208 Jy ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=7.475 mas, bpa=11.8 degrees ! Estimated noise=790.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353403 Jy ! Component: 100 - total flux cleaned = 0.00568682 Jy ! Component: 150 - total flux cleaned = 0.00649847 Jy ! Component: 200 - total flux cleaned = 0.00704337 Jy ! Total flux subtracted in 200 components = 0.00704337 Jy ! Clean residual min=-0.002058 max=0.001907 Jy/beam ! Clean residual mean=0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.269251 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.269251 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.709 mas, bmaj=8.922 mas, bpa=1.255 degrees ! Estimated noise=975.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235932 Jy ! Component: 100 - total flux cleaned = 0.000412218 Jy ! Component: 150 - total flux cleaned = 0.00051218 Jy ! Component: 200 - total flux cleaned = 0.000527227 Jy ! Total flux subtracted in 200 components = 0.000527227 Jy ! Clean residual min=-0.001780 max=0.002084 Jy/beam ! Clean residual mean=0.000005 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.269778 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.82121e-08 Jy ! Component: 100 - total flux cleaned = 9.8725e-06 Jy ! Component: 150 - total flux cleaned = 9.79949e-06 Jy ! Component: 200 - total flux cleaned = 9.81528e-06 Jy ! Total flux subtracted in 200 components = 9.81528e-06 Jy ! Clean residual min=-0.001780 max=0.002091 Jy/beam ! Clean residual mean=0.000005 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.269788 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.269788 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=7.475 mas, bpa=11.8 degrees ! Estimated noise=790.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210108 Jy ! Component: 100 - total flux cleaned = -0.000184687 Jy ! Component: 150 - total flux cleaned = -0.000184535 Jy ! Component: 200 - total flux cleaned = -0.000165618 Jy ! Total flux subtracted in 200 components = -0.000165618 Jy ! Clean residual min=-0.002060 max=0.001801 Jy/beam ! Clean residual mean=0.000002 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.269622 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.269622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102012Jy sigma=0.000674 ! Fit after self-cal, rms=0.102017Jy sigma=0.000674 wmodel J1001+2911_S_2017_02_19_pus_map.mod ! Writing 59 model components to file: J1001+2911_S_2017_02_19_pus_map.mod wobs J1001+2911_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1001+2911_S_2017_02_19_pus_uvs.fits wwins J1001+2911_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J1001+2911_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000371442 Jy ! Component: 100 - total flux cleaned = -0.000370197 Jy ! Component: 150 - total flux cleaned = -0.000309064 Jy ! Component: 200 - total flux cleaned = -0.000220927 Jy ! Component: 250 - total flux cleaned = -7.80493e-05 Jy ! Component: 300 - total flux cleaned = -2.2518e-05 Jy ! Component: 350 - total flux cleaned = 4.58964e-06 Jy ! Component: 400 - total flux cleaned = 8.25713e-05 Jy ! Component: 450 - total flux cleaned = 0.000108041 Jy ! Component: 500 - total flux cleaned = 0.000157285 Jy ! Component: 550 - total flux cleaned = 0.000181221 Jy ! Component: 600 - total flux cleaned = 0.00013454 Jy ! Component: 650 - total flux cleaned = 8.91084e-05 Jy ! Component: 700 - total flux cleaned = 4.41024e-05 Jy ! Component: 750 - total flux cleaned = -6.51045e-05 Jy ! Component: 800 - total flux cleaned = -0.000215018 Jy ! Component: 850 - total flux cleaned = -0.000214815 Jy ! Component: 900 - total flux cleaned = -0.000318646 Jy ! Component: 950 - total flux cleaned = -0.000440858 Jy ! Component: 1000 - total flux cleaned = -0.000480576 Jy ! Component: 1050 - total flux cleaned = -0.000559063 Jy ! Component: 1100 - total flux cleaned = -0.000578526 Jy ! Component: 1150 - total flux cleaned = -0.000636015 Jy ! Component: 1200 - total flux cleaned = -0.000673807 Jy ! Component: 1250 - total flux cleaned = -0.000710817 Jy ! Component: 1300 - total flux cleaned = -0.000765699 Jy ! Component: 1350 - total flux cleaned = -0.000783707 Jy ! Component: 1400 - total flux cleaned = -0.00078385 Jy ! Component: 1450 - total flux cleaned = -0.000853743 Jy ! Component: 1500 - total flux cleaned = -0.000836409 Jy ! Component: 1550 - total flux cleaned = -0.000853336 Jy ! Component: 1600 - total flux cleaned = -0.000836493 Jy ! Component: 1650 - total flux cleaned = -0.000819969 Jy ! Component: 1700 - total flux cleaned = -0.000869319 Jy ! Component: 1750 - total flux cleaned = -0.00086955 Jy ! Component: 1800 - total flux cleaned = -0.000853706 Jy ! Component: 1850 - total flux cleaned = -0.000916745 Jy ! Component: 1900 - total flux cleaned = -0.000838395 Jy ! Component: 1950 - total flux cleaned = -0.000776798 Jy ! Component: 2000 - total flux cleaned = -0.000807607 Jy ! Component: 2050 - total flux cleaned = -0.000792386 Jy ! Component: 2100 - total flux cleaned = -0.000747641 Jy ! Component: 2150 - total flux cleaned = -0.000762382 Jy ! Component: 2200 - total flux cleaned = -0.000718291 Jy ! Component: 2250 - total flux cleaned = -0.000703916 Jy ! Component: 2300 - total flux cleaned = -0.000675226 Jy ! Component: 2350 - total flux cleaned = -0.000717982 Jy ! Component: 2400 - total flux cleaned = -0.000647323 Jy ! Component: 2450 - total flux cleaned = -0.000633354 Jy ! Component: 2500 - total flux cleaned = -0.000647122 Jy ! Component: 2550 - total flux cleaned = -0.000606055 Jy ! Component: 2600 - total flux cleaned = -0.000592471 Jy ! Component: 2650 - total flux cleaned = -0.000511444 Jy ! Component: 2700 - total flux cleaned = -0.000578431 Jy ! Component: 2750 - total flux cleaned = -0.000525317 Jy ! Component: 2800 - total flux cleaned = -0.000512267 Jy ! Component: 2850 - total flux cleaned = -0.000551406 Jy ! Component: 2900 - total flux cleaned = -0.000499634 Jy ! Component: 2950 - total flux cleaned = -0.000525326 Jy ! Component: 3000 - total flux cleaned = -0.000512643 Jy ! Component: 3050 - total flux cleaned = -0.000499999 Jy ! Component: 3100 - total flux cleaned = -0.000512393 Jy ! Component: 3150 - total flux cleaned = -0.000499958 Jy ! Component: 3200 - total flux cleaned = -0.000500036 Jy ! Component: 3250 - total flux cleaned = -0.000524594 Jy ! Component: 3300 - total flux cleaned = -0.000524629 Jy ! Component: 3350 - total flux cleaned = -0.000548727 Jy ! Component: 3400 - total flux cleaned = -0.000524713 Jy ! Component: 3450 - total flux cleaned = -0.000548737 Jy ! Component: 3500 - total flux cleaned = -0.000572272 Jy ! Component: 3550 - total flux cleaned = -0.000560559 Jy ! Component: 3600 - total flux cleaned = -0.000583761 Jy ! Component: 3650 - total flux cleaned = -0.000595482 Jy ! Component: 3700 - total flux cleaned = -0.000595471 Jy ! Component: 3750 - total flux cleaned = -0.000641265 Jy ! Component: 3800 - total flux cleaned = -0.000607246 Jy ! Component: 3850 - total flux cleaned = -0.000629731 Jy ! Component: 3900 - total flux cleaned = -0.000629848 Jy ! Component: 3950 - total flux cleaned = -0.000696735 Jy ! Component: 4000 - total flux cleaned = -0.000652377 Jy ! Component: 4050 - total flux cleaned = -0.000641449 Jy ! Total flux subtracted in 4096 components = -0.000696189 Jy ! Clean residual min=-0.000607 max=0.000767 Jy/beam ! Clean residual mean=0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.268926 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 352 components and 0.268926 Jy ![Exited script file: muppet] wmap "J1001+2911_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.666 x 7.475 at 11.8 degrees (North through East) ! Clean map min=-0.0012449 max=0.25789 Jy/beam ! Writing clean map to FITS file: J1001+2911_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.25789 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201447 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.23434 0.23434 0.46868 0.93736 1.87472 3.74944 7.49888 14.9978 29.9955 59.991 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.257 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.666 x 7.475 at 11.8 degrees (North through East) ! Clean map min=-0.0012449 max=0.25789 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1001+2911_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:48:25 2019