! Started logfile: J1001+1015_S_2017_08_12_pus_uvs.log on Fri May 10 14:57:23 2019 obs J1001+1015_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1001+1015_S_2017_08_12_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.893762 visibilities/baseline/integration-bin. ! Found source: J1001+1015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 18340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1001+1015_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 840 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952885Jy sigma=0.008341 ! Fit after self-cal, rms=0.902341Jy sigma=0.007908 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=6.522 mas, bpa=-1.837 degrees ! Estimated noise=1076.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0740787 Jy ! Component: 100 - total flux cleaned = 0.0952068 Jy ! Total flux subtracted in 100 components = 0.0952068 Jy ! Clean residual min=-0.011549 max=0.050274 Jy/beam ! Clean residual mean=-0.000072 rms=0.003476 Jy/beam ! Combined flux in latest and established models = 0.0952068 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0952068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112985Jy sigma=0.000951 ! Fit after self-cal, rms=0.112539Jy sigma=0.000948 ! Inverting map ! Added new window around map position (-3.5, -11). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408394 Jy ! Component: 100 - total flux cleaned = 0.0566305 Jy ! Total flux subtracted in 100 components = 0.0566305 Jy ! Clean residual min=-0.006314 max=0.015899 Jy/beam ! Clean residual mean=-0.000039 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 0.151837 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.151837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096128Jy sigma=0.000784 ! Fit after self-cal, rms=0.091685Jy sigma=0.000747 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186202 Jy ! Component: 100 - total flux cleaned = 0.0275971 Jy ! Total flux subtracted in 100 components = 0.0275971 Jy ! Clean residual min=-0.004475 max=0.005761 Jy/beam ! Clean residual mean=-0.000019 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.179434 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.179434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087252Jy sigma=0.000702 ! Fit after self-cal, rms=0.086856Jy sigma=0.000699 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00770587 Jy ! Component: 100 - total flux cleaned = 0.0124764 Jy ! Total flux subtracted in 100 components = 0.0124764 Jy ! Clean residual min=-0.004094 max=0.004318 Jy/beam ! Clean residual mean=-0.000010 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.191911 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 58 components and 0.191911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085973Jy sigma=0.000689 ! Fit after self-cal, rms=0.085925Jy sigma=0.000689 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=7.48 mas, bpa=-1.983 degrees ! Estimated noise=704.317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533274 Jy ! Component: 100 - total flux cleaned = 0.00877 Jy ! Component: 150 - total flux cleaned = 0.010627 Jy ! Component: 200 - total flux cleaned = 0.0116632 Jy ! Total flux subtracted in 200 components = 0.0116632 Jy ! Clean residual min=-0.002833 max=0.002850 Jy/beam ! Clean residual mean=-0.000005 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.203574 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 82 components and 0.203574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085563Jy sigma=0.000685 ! Fit after self-cal, rms=0.085555Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.93 HN 0.97 KP 1.01 ! LA 1.00 MK 1.05 NL 0.85 OV 1.00 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.98 KP 0.99 ! LA 0.95 MK 1.03 NL 1.03 OV 1.05 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.02 KP 0.99 ! LA 1.00 MK 1.00 NL 0.96 OV 0.95 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 228 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 0.70 KP 1.00* ! LA 1.00* MK 0.83 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.085555Jy sigma=0.000685 ! Fit after self-cal, rms=0.084794Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=7.541 mas, bpa=-1.553 degrees ! Estimated noise=703.785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129414 Jy ! Component: 100 - total flux cleaned = -0.00151918 Jy ! Component: 150 - total flux cleaned = -0.00148527 Jy ! Component: 200 - total flux cleaned = -0.00142636 Jy ! Total flux subtracted in 200 components = -0.00142636 Jy ! Clean residual min=-0.002510 max=0.002625 Jy/beam ! Clean residual mean=-0.000004 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.202148 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.202148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084748Jy sigma=0.000682 ! Fit after self-cal, rms=0.084731Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084731Jy sigma=0.000682 ! Fit after self-cal, rms=0.087121Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=7.553 mas, bpa=-1.316 degrees ! Estimated noise=704.228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.14084e-05 Jy ! Component: 100 - total flux cleaned = 0.000129617 Jy ! Component: 150 - total flux cleaned = 0.000181627 Jy ! Component: 200 - total flux cleaned = 0.000205823 Jy ! Total flux subtracted in 200 components = 0.000205823 Jy ! Clean residual min=-0.002036 max=0.001965 Jy/beam ! Clean residual mean=0.000003 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.202353 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 98 components and 0.202353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087104Jy sigma=0.000680 ! Fit after self-cal, rms=0.087148Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.3986e-05 Jy ! Component: 100 - total flux cleaned = -4.34459e-05 Jy ! Component: 150 - total flux cleaned = -8.09944e-05 Jy ! Component: 200 - total flux cleaned = -9.81605e-05 Jy ! Total flux subtracted in 200 components = -9.81605e-05 Jy ! Clean residual min=-0.002015 max=0.001926 Jy/beam ! Clean residual mean=0.000002 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.202255 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 0.202255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087140Jy sigma=0.000680 ! Fit after self-cal, rms=0.087140Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087140Jy sigma=0.000680 ! Fit after self-cal, rms=0.087876Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=7.546 mas, bpa=-1.306 degrees ! Estimated noise=702.792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235859 Jy ! Component: 100 - total flux cleaned = -0.000257191 Jy ! Component: 150 - total flux cleaned = -0.000294206 Jy ! Component: 200 - total flux cleaned = -0.000329331 Jy ! Total flux subtracted in 200 components = -0.000329331 Jy ! Clean residual min=-0.001759 max=0.001611 Jy/beam ! Clean residual mean=0.000002 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.201926 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 104 components and 0.201926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087868Jy sigma=0.000678 ! Fit after self-cal, rms=0.087880Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.36183e-05 Jy ! Component: 100 - total flux cleaned = -8.51576e-05 Jy ! Component: 150 - total flux cleaned = -0.000114247 Jy ! Component: 200 - total flux cleaned = -0.000154376 Jy ! Total flux subtracted in 200 components = -0.000154376 Jy ! Clean residual min=-0.001749 max=0.001603 Jy/beam ! Clean residual mean=0.000002 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.201771 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 106 components and 0.201771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087875Jy sigma=0.000678 ! Fit after self-cal, rms=0.087875Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087875Jy sigma=0.000678 ! Fit after self-cal, rms=0.087963Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.353 mas, bmaj=11.54 mas, bpa=-6.729 degrees ! Estimated noise=882.001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331014 Jy ! Component: 100 - total flux cleaned = -0.000354712 Jy ! Component: 150 - total flux cleaned = -0.000364762 Jy ! Component: 200 - total flux cleaned = -0.000374027 Jy ! Total flux subtracted in 200 components = -0.000374027 Jy ! Clean residual min=-0.001597 max=0.001631 Jy/beam ! Clean residual mean=0.000005 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.201397 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 116 components and 0.201397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087962Jy sigma=0.000678 ! Fit after self-cal, rms=0.087964Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3108e-05 Jy ! Component: 100 - total flux cleaned = 4.19637e-06 Jy ! Component: 150 - total flux cleaned = 4.26423e-06 Jy ! Component: 200 - total flux cleaned = -2.89756e-06 Jy ! Total flux subtracted in 200 components = -2.89756e-06 Jy ! Clean residual min=-0.001600 max=0.001636 Jy/beam ! Clean residual mean=0.000005 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.201395 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 122 components and 0.201395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087964Jy sigma=0.000678 ! Fit after self-cal, rms=0.087964Jy sigma=0.000678 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=7.541 mas, bpa=-1.279 degrees ! Estimated noise=702.668 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 7.541 at -1.279 degrees (North through East) ! Clean map min=-0.0016446 max=0.099266 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=6.558 mas, bpa=-0.9816 degrees ! Estimated noise=1016.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0853338 Jy ! Component: 100 - total flux cleaned = 0.12662 Jy ! Component: 150 - total flux cleaned = 0.148634 Jy ! Component: 200 - total flux cleaned = 0.162958 Jy ! Total flux subtracted in 200 components = 0.162958 Jy ! Clean residual min=-0.004439 max=0.007828 Jy/beam ! Clean residual mean=-0.000024 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.162958 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.162958 Jy ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=7.541 mas, bpa=-1.279 degrees ! Estimated noise=702.668 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139833 Jy ! Component: 100 - total flux cleaned = 0.0226722 Jy ! Component: 150 - total flux cleaned = 0.0282727 Jy ! Component: 200 - total flux cleaned = 0.0319747 Jy ! Total flux subtracted in 200 components = 0.0319747 Jy ! Clean residual min=-0.001900 max=0.001981 Jy/beam ! Clean residual mean=-0.000004 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.194933 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 59 components and 0.194933 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.353 mas, bmaj=11.54 mas, bpa=-6.729 degrees ! Estimated noise=882.001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003268 Jy ! Component: 100 - total flux cleaned = 0.00488886 Jy ! Component: 150 - total flux cleaned = 0.00576344 Jy ! Component: 200 - total flux cleaned = 0.00625176 Jy ! Total flux subtracted in 200 components = 0.00625176 Jy ! Clean residual min=-0.001608 max=0.001682 Jy/beam ! Clean residual mean=0.000005 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.201185 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.07404e-05 Jy ! Component: 100 - total flux cleaned = 0.000149755 Jy ! Component: 150 - total flux cleaned = 0.000199573 Jy ! Component: 200 - total flux cleaned = 0.000218 Jy ! Total flux subtracted in 200 components = 0.000218 Jy ! Clean residual min=-0.001603 max=0.001681 Jy/beam ! Clean residual mean=0.000005 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.201403 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 91 components and 0.201403 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=7.541 mas, bpa=-1.279 degrees ! Estimated noise=702.668 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.17363e-05 Jy ! Component: 100 - total flux cleaned = 9.30647e-05 Jy ! Component: 150 - total flux cleaned = 0.000202022 Jy ! Component: 200 - total flux cleaned = 0.000227273 Jy ! Total flux subtracted in 200 components = 0.000227273 Jy ! Clean residual min=-0.001719 max=0.001841 Jy/beam ! Clean residual mean=0.000003 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.20163 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 104 components and 0.20163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088008Jy sigma=0.000678 ! Fit after self-cal, rms=0.088003Jy sigma=0.000678 wmodel J1001+1015_S_2017_08_12_pus_map.mod ! Writing 104 model components to file: J1001+1015_S_2017_08_12_pus_map.mod wobs J1001+1015_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1001+1015_S_2017_08_12_pus_uvs.fits wwins J1001+1015_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1001+1015_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109574 Jy ! Component: 100 - total flux cleaned = 4.78729e-05 Jy ! Component: 150 - total flux cleaned = -6.92532e-05 Jy ! Component: 200 - total flux cleaned = -0.000210458 Jy ! Component: 250 - total flux cleaned = -0.000292042 Jy ! Component: 300 - total flux cleaned = -0.000292044 Jy ! Component: 350 - total flux cleaned = -0.000395335 Jy ! Component: 400 - total flux cleaned = -0.000470259 Jy ! Component: 450 - total flux cleaned = -0.000470012 Jy ! Component: 500 - total flux cleaned = -0.000542243 Jy ! Component: 550 - total flux cleaned = -0.000612815 Jy ! Component: 600 - total flux cleaned = -0.000705145 Jy ! Component: 650 - total flux cleaned = -0.000750797 Jy ! Component: 700 - total flux cleaned = -0.000773434 Jy ! Component: 750 - total flux cleaned = -0.000729958 Jy ! Component: 800 - total flux cleaned = -0.000860899 Jy ! Component: 850 - total flux cleaned = -0.000882016 Jy ! Component: 900 - total flux cleaned = -0.000882184 Jy ! Component: 950 - total flux cleaned = -0.000882211 Jy ! Component: 1000 - total flux cleaned = -0.00090295 Jy ! Component: 1050 - total flux cleaned = -0.00094356 Jy ! Component: 1100 - total flux cleaned = -0.000862427 Jy ! Component: 1150 - total flux cleaned = -0.000862686 Jy ! Component: 1200 - total flux cleaned = -0.000823115 Jy ! Component: 1250 - total flux cleaned = -0.000764522 Jy ! Component: 1300 - total flux cleaned = -0.00068736 Jy ! Component: 1350 - total flux cleaned = -0.000610988 Jy ! Component: 1400 - total flux cleaned = -0.000516248 Jy ! Component: 1450 - total flux cleaned = -0.000478659 Jy ! Component: 1500 - total flux cleaned = -0.00036734 Jy ! Component: 1550 - total flux cleaned = -0.000294211 Jy ! Component: 1600 - total flux cleaned = -0.00025743 Jy ! Component: 1650 - total flux cleaned = -0.000149116 Jy ! Component: 1700 - total flux cleaned = -9.5601e-05 Jy ! Component: 1750 - total flux cleaned = -4.24312e-05 Jy ! Component: 1800 - total flux cleaned = -2.47262e-05 Jy ! Component: 1850 - total flux cleaned = -7.23847e-06 Jy ! Component: 1900 - total flux cleaned = 9.62332e-05 Jy ! Component: 1950 - total flux cleaned = 7.91479e-05 Jy ! Component: 2000 - total flux cleaned = 0.000198074 Jy ! Component: 2050 - total flux cleaned = 0.000231539 Jy ! Component: 2100 - total flux cleaned = 0.00024829 Jy ! Component: 2150 - total flux cleaned = 0.00034768 Jy ! Component: 2200 - total flux cleaned = 0.000347297 Jy ! Component: 2250 - total flux cleaned = 0.000412547 Jy ! Component: 2300 - total flux cleaned = 0.000461075 Jy ! Component: 2350 - total flux cleaned = 0.000412806 Jy ! Component: 2400 - total flux cleaned = 0.000444763 Jy ! Component: 2450 - total flux cleaned = 0.000444937 Jy ! Component: 2500 - total flux cleaned = 0.000492218 Jy ! Component: 2550 - total flux cleaned = 0.00050773 Jy ! Component: 2600 - total flux cleaned = 0.000507789 Jy ! Component: 2650 - total flux cleaned = 0.000538703 Jy ! Component: 2700 - total flux cleaned = 0.000538795 Jy ! Component: 2750 - total flux cleaned = 0.000614776 Jy ! Component: 2800 - total flux cleaned = 0.00064497 Jy ! Component: 2850 - total flux cleaned = 0.000690037 Jy ! Component: 2900 - total flux cleaned = 0.000705099 Jy ! Component: 2950 - total flux cleaned = 0.000794075 Jy ! Component: 3000 - total flux cleaned = 0.000793964 Jy ! Component: 3050 - total flux cleaned = 0.000808678 Jy ! Component: 3100 - total flux cleaned = 0.000866833 Jy ! Component: 3150 - total flux cleaned = 0.000895769 Jy ! Component: 3200 - total flux cleaned = 0.000867052 Jy ! Component: 3250 - total flux cleaned = 0.000924224 Jy ! Component: 3300 - total flux cleaned = 0.000924184 Jy ! Component: 3350 - total flux cleaned = 0.000980662 Jy ! Component: 3400 - total flux cleaned = 0.00103673 Jy ! Component: 3450 - total flux cleaned = 0.00105054 Jy ! Component: 3500 - total flux cleaned = 0.00102285 Jy ! Component: 3550 - total flux cleaned = 0.00109173 Jy ! Component: 3600 - total flux cleaned = 0.001037 Jy ! Component: 3650 - total flux cleaned = 0.00107785 Jy ! Component: 3700 - total flux cleaned = 0.00110491 Jy ! Component: 3750 - total flux cleaned = 0.00115875 Jy ! Component: 3800 - total flux cleaned = 0.00114544 Jy ! Component: 3850 - total flux cleaned = 0.00113211 Jy ! Component: 3900 - total flux cleaned = 0.00121143 Jy ! Component: 3950 - total flux cleaned = 0.00122458 Jy ! Component: 4000 - total flux cleaned = 0.00121146 Jy ! Component: 4050 - total flux cleaned = 0.00128926 Jy ! Total flux subtracted in 4096 components = 0.00127632 Jy ! Clean residual min=-0.000686 max=0.000937 Jy/beam ! Clean residual mean=-0.000000 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.202906 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 380 components and 0.202906 Jy ![Exited script file: muppet] wmap "J1001+1015_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 7.541 at -1.279 degrees (North through East) ! Clean map min=-0.0016391 max=0.099534 Jy/beam ! Writing clean map to FITS file: J1001+1015_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0995338 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236014 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.711358 0.711358 1.42272 2.84543 5.69086 11.3817 22.7634 45.5269 91.0538 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 7.541 at -1.279 degrees (North through East) ! Clean map min=-0.0016391 max=0.099534 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1001+1015_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:57:27 2019