! Started logfile: J0958-2655_S_2017_10_09_pus_uvs.log on Sun May 12 13:09:27 2019 obs J0958-2655_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0958-2655_S_2017_10_09_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.711745 visibilities/baseline/integration-bin. ! Found source: J0958-2655 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0958-2655_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 267 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 611 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927305Jy sigma=0.006273 ! Fit after self-cal, rms=0.901650Jy sigma=0.006108 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.54 mas, bmaj=12.84 mas, bpa=-22.03 degrees ! Estimated noise=1753.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0734274 Jy ! Component: 100 - total flux cleaned = 0.0938924 Jy ! Total flux subtracted in 100 components = 0.0938924 Jy ! Clean residual min=-0.007315 max=0.010660 Jy/beam ! Clean residual mean=-0.000015 rms=0.002094 Jy/beam ! Combined flux in latest and established models = 0.0938924 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0938924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107217Jy sigma=0.000677 ! Fit after self-cal, rms=0.107199Jy sigma=0.000677 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=15.04 mas, bpa=-22.27 degrees ! Estimated noise=1156.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018886 Jy ! Component: 100 - total flux cleaned = 0.0290192 Jy ! Component: 150 - total flux cleaned = 0.0350949 Jy ! Component: 200 - total flux cleaned = 0.0391018 Jy ! Total flux subtracted in 200 components = 0.0391018 Jy ! Clean residual min=-0.005311 max=0.006286 Jy/beam ! Clean residual mean=-0.000026 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.132994 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 66 components and 0.132994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103811Jy sigma=0.000653 ! Fit after self-cal, rms=0.103810Jy sigma=0.000652 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.91 HN 1.02 KP 1.09 ! LA 0.97 MK 1.05 NL 0.90 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.11 KP 1.05 ! LA 0.93 MK 1.01 NL 1.06 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 0.99 HN 1.03 KP 0.92 ! LA 0.72 MK 1.03 NL 1.21 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.88 KP 1.00* ! LA 1.00* MK 1.09 NL 1.00* OV 1.00* ! PT 0.89 ! ! ! Fit before self-cal, rms=0.103810Jy sigma=0.000652 ! Fit after self-cal, rms=0.104106Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=15.37 mas, bpa=-22.27 degrees ! Estimated noise=1166.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516035 Jy ! Component: 100 - total flux cleaned = 0.00781573 Jy ! Component: 150 - total flux cleaned = 0.00897111 Jy ! Component: 200 - total flux cleaned = 0.00992378 Jy ! Total flux subtracted in 200 components = 0.00992378 Jy ! Clean residual min=-0.003063 max=0.002818 Jy/beam ! Clean residual mean=-0.000014 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.142918 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 102 components and 0.142918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103848Jy sigma=0.000643 ! Fit after self-cal, rms=0.103977Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103977Jy sigma=0.000642 ! Fit after self-cal, rms=0.104254Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=15.38 mas, bpa=-22.38 degrees ! Estimated noise=1159.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204272 Jy ! Component: 100 - total flux cleaned = 0.00222972 Jy ! Component: 150 - total flux cleaned = 0.00244025 Jy ! Component: 200 - total flux cleaned = 0.0026294 Jy ! Total flux subtracted in 200 components = 0.0026294 Jy ! Clean residual min=-0.002485 max=0.002919 Jy/beam ! Clean residual mean=-0.000004 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.145547 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 121 components and 0.145547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104183Jy sigma=0.000640 ! Fit after self-cal, rms=0.104242Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (90, 111). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533004 Jy ! Component: 100 - total flux cleaned = 9.12517e-05 Jy ! Component: 150 - total flux cleaned = -8.66027e-05 Jy ! Component: 200 - total flux cleaned = -0.000138749 Jy ! Total flux subtracted in 200 components = -0.000138749 Jy ! Clean residual min=-0.002345 max=0.002166 Jy/beam ! Clean residual mean=-0.000005 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.145409 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 137 components and 0.145409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104128Jy sigma=0.000639 ! Fit after self-cal, rms=0.104111Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104111Jy sigma=0.000639 ! Fit after self-cal, rms=0.104358Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=15.39 mas, bpa=-22.44 degrees ! Estimated noise=1156.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316448 Jy ! Component: 100 - total flux cleaned = 0.000314938 Jy ! Component: 150 - total flux cleaned = 0.000367259 Jy ! Component: 200 - total flux cleaned = 0.000413491 Jy ! Total flux subtracted in 200 components = 0.000413491 Jy ! Clean residual min=-0.002236 max=0.002106 Jy/beam ! Clean residual mean=0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.145822 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 151 components and 0.145822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104300Jy sigma=0.000639 ! Fit after self-cal, rms=0.104319Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28076e-05 Jy ! Component: 100 - total flux cleaned = 5.68754e-05 Jy ! Component: 150 - total flux cleaned = 5.5562e-05 Jy ! Component: 200 - total flux cleaned = 5.51839e-05 Jy ! Total flux subtracted in 200 components = 5.51839e-05 Jy ! Clean residual min=-0.002189 max=0.002015 Jy/beam ! Clean residual mean=0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.145877 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 155 components and 0.145877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104283Jy sigma=0.000639 ! Fit after self-cal, rms=0.104278Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104278Jy sigma=0.000639 ! Fit after self-cal, rms=0.104221Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.063 mas, bmaj=27.68 mas, bpa=-13.18 degrees ! Estimated noise=1401.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400238 Jy ! Component: 100 - total flux cleaned = 0.000477963 Jy ! Component: 150 - total flux cleaned = 0.000511949 Jy ! Component: 200 - total flux cleaned = 0.000450244 Jy ! Total flux subtracted in 200 components = 0.000450244 Jy ! Clean residual min=-0.002204 max=0.002322 Jy/beam ! Clean residual mean=0.000004 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.146328 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 187 components and 0.146328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104208Jy sigma=0.000639 ! Fit after self-cal, rms=0.104212Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105867 Jy ! Component: 100 - total flux cleaned = 7.56265e-05 Jy ! Component: 150 - total flux cleaned = 1.94768e-05 Jy ! Component: 200 - total flux cleaned = -5.78877e-05 Jy ! Total flux subtracted in 200 components = -5.78877e-05 Jy ! Clean residual min=-0.002212 max=0.002234 Jy/beam ! Clean residual mean=0.000005 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.14627 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 201 components and 0.14627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104205Jy sigma=0.000639 ! Fit after self-cal, rms=0.104203Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=15.38 mas, bpa=-22.45 degrees ! Estimated noise=1153.71 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.108 x 15.38 at -22.45 degrees (North through East) ! Clean map min=-0.0044379 max=0.097259 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.564 mas, bmaj=13.22 mas, bpa=-22.02 degrees ! Estimated noise=1815.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0741797 Jy ! Component: 100 - total flux cleaned = 0.0949987 Jy ! Component: 150 - total flux cleaned = 0.106567 Jy ! Component: 200 - total flux cleaned = 0.113451 Jy ! Total flux subtracted in 200 components = 0.113451 Jy ! Clean residual min=-0.005632 max=0.004925 Jy/beam ! Clean residual mean=-0.000006 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.113451 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.113451 Jy ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=15.38 mas, bpa=-22.45 degrees ! Estimated noise=1153.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081374 Jy ! Component: 100 - total flux cleaned = 0.0136559 Jy ! Component: 150 - total flux cleaned = 0.017679 Jy ! Component: 200 - total flux cleaned = 0.0198824 Jy ! Total flux subtracted in 200 components = 0.0198824 Jy ! Clean residual min=-0.003460 max=0.003208 Jy/beam ! Clean residual mean=-0.000016 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.133333 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 86 components and 0.133333 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.063 mas, bmaj=27.68 mas, bpa=-13.18 degrees ! Estimated noise=1401.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00462917 Jy ! Component: 100 - total flux cleaned = 0.00702391 Jy ! Component: 150 - total flux cleaned = 0.00786506 Jy ! Component: 200 - total flux cleaned = 0.00849339 Jy ! Total flux subtracted in 200 components = 0.00849339 Jy ! Clean residual min=-0.003045 max=0.002488 Jy/beam ! Clean residual mean=-0.000010 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.141827 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385033 Jy ! Component: 100 - total flux cleaned = 0.000728853 Jy ! Component: 150 - total flux cleaned = 0.000981799 Jy ! Component: 200 - total flux cleaned = 0.00115732 Jy ! Total flux subtracted in 200 components = 0.00115732 Jy ! Clean residual min=-0.002590 max=0.002119 Jy/beam ! Clean residual mean=-0.000006 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.142984 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 172 components and 0.142984 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=15.38 mas, bpa=-22.45 degrees ! Estimated noise=1153.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.78488e-05 Jy ! Component: 100 - total flux cleaned = 0.000157405 Jy ! Component: 150 - total flux cleaned = 0.000298898 Jy ! Component: 200 - total flux cleaned = 0.000426956 Jy ! Total flux subtracted in 200 components = 0.000426956 Jy ! Clean residual min=-0.002717 max=0.002202 Jy/beam ! Clean residual mean=-0.000004 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.143411 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 194 components and 0.143411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104294Jy sigma=0.000639 ! Fit after self-cal, rms=0.104269Jy sigma=0.000639 wmodel J0958-2655_S_2017_10_09_pus_map.mod ! Writing 194 model components to file: J0958-2655_S_2017_10_09_pus_map.mod wobs J0958-2655_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0958-2655_S_2017_10_09_pus_uvs.fits wwins J0958-2655_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J0958-2655_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000628034 Jy ! Component: 100 - total flux cleaned = -0.00090327 Jy ! Component: 150 - total flux cleaned = -0.00126802 Jy ! Component: 200 - total flux cleaned = -0.00153846 Jy ! Component: 250 - total flux cleaned = -0.00176231 Jy ! Component: 300 - total flux cleaned = -0.00215492 Jy ! Component: 350 - total flux cleaned = -0.00244511 Jy ! Component: 400 - total flux cleaned = -0.00272561 Jy ! Component: 450 - total flux cleaned = -0.00291576 Jy ! Component: 500 - total flux cleaned = -0.00317931 Jy ! Component: 550 - total flux cleaned = -0.00335913 Jy ! Component: 600 - total flux cleaned = -0.00353546 Jy ! Component: 650 - total flux cleaned = -0.00368226 Jy ! Component: 700 - total flux cleaned = -0.00373036 Jy ! Component: 750 - total flux cleaned = -0.00387122 Jy ! Component: 800 - total flux cleaned = -0.00391702 Jy ! Component: 850 - total flux cleaned = -0.00400714 Jy ! Component: 900 - total flux cleaned = -0.0040738 Jy ! Component: 950 - total flux cleaned = -0.00418243 Jy ! Component: 1000 - total flux cleaned = -0.00422523 Jy ! Component: 1050 - total flux cleaned = -0.00432914 Jy ! Component: 1100 - total flux cleaned = -0.00432944 Jy ! Component: 1150 - total flux cleaned = -0.00440996 Jy ! Component: 1200 - total flux cleaned = -0.00442991 Jy ! Component: 1250 - total flux cleaned = -0.00448834 Jy ! Component: 1300 - total flux cleaned = -0.00454556 Jy ! Component: 1350 - total flux cleaned = -0.00450803 Jy ! Component: 1400 - total flux cleaned = -0.00463761 Jy ! Component: 1450 - total flux cleaned = -0.00467396 Jy ! Component: 1500 - total flux cleaned = -0.00471007 Jy ! Component: 1550 - total flux cleaned = -0.00481685 Jy ! Component: 1600 - total flux cleaned = -0.00486961 Jy ! Component: 1650 - total flux cleaned = -0.0049042 Jy ! Component: 1700 - total flux cleaned = -0.00498967 Jy ! Component: 1750 - total flux cleaned = -0.00500663 Jy ! Component: 1800 - total flux cleaned = -0.00502324 Jy ! Component: 1850 - total flux cleaned = -0.00503989 Jy ! Component: 1900 - total flux cleaned = -0.00505616 Jy ! Component: 1950 - total flux cleaned = -0.00500749 Jy ! Component: 2000 - total flux cleaned = -0.00503977 Jy ! Component: 2050 - total flux cleaned = -0.0049917 Jy ! Component: 2100 - total flux cleaned = -0.00494421 Jy ! Component: 2150 - total flux cleaned = -0.00492852 Jy ! Component: 2200 - total flux cleaned = -0.00491304 Jy ! Component: 2250 - total flux cleaned = -0.00488219 Jy ! Component: 2300 - total flux cleaned = -0.00488208 Jy ! Component: 2350 - total flux cleaned = -0.00488209 Jy ! Component: 2400 - total flux cleaned = -0.00489698 Jy ! Component: 2450 - total flux cleaned = -0.00482262 Jy ! Component: 2500 - total flux cleaned = -0.00480788 Jy ! Component: 2550 - total flux cleaned = -0.00479335 Jy ! Component: 2600 - total flux cleaned = -0.00482241 Jy ! Component: 2650 - total flux cleaned = -0.00482252 Jy ! Component: 2700 - total flux cleaned = -0.00485105 Jy ! Component: 2750 - total flux cleaned = -0.00489353 Jy ! Component: 2800 - total flux cleaned = -0.00494998 Jy ! Component: 2850 - total flux cleaned = -0.00496392 Jy ! Component: 2900 - total flux cleaned = -0.00497785 Jy ! Component: 2950 - total flux cleaned = -0.00503319 Jy ! Component: 3000 - total flux cleaned = -0.00507448 Jy ! Component: 3050 - total flux cleaned = -0.00511541 Jy ! Component: 3100 - total flux cleaned = -0.00516956 Jy ! Component: 3150 - total flux cleaned = -0.00519648 Jy ! Component: 3200 - total flux cleaned = -0.00527692 Jy ! Component: 3250 - total flux cleaned = -0.00533018 Jy ! Component: 3300 - total flux cleaned = -0.0054097 Jy ! Component: 3350 - total flux cleaned = -0.00544914 Jy ! Component: 3400 - total flux cleaned = -0.0055277 Jy ! Component: 3450 - total flux cleaned = -0.00557971 Jy ! Component: 3500 - total flux cleaned = -0.00560567 Jy ! Component: 3550 - total flux cleaned = -0.0056444 Jy ! Component: 3600 - total flux cleaned = -0.00575996 Jy ! Component: 3650 - total flux cleaned = -0.00581107 Jy ! Component: 3700 - total flux cleaned = -0.00591287 Jy ! Component: 3750 - total flux cleaned = -0.00597623 Jy ! Component: 3800 - total flux cleaned = -0.00603939 Jy ! Component: 3850 - total flux cleaned = -0.00615249 Jy ! Component: 3900 - total flux cleaned = -0.00621507 Jy ! Component: 3950 - total flux cleaned = -0.00626503 Jy ! Component: 4000 - total flux cleaned = -0.00635219 Jy ! Component: 4050 - total flux cleaned = -0.00641429 Jy ! Total flux subtracted in 4096 components = -0.00650091 Jy ! Clean residual min=-0.000736 max=0.000679 Jy/beam ! Clean residual mean=-0.000004 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.13691 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 426 components and 0.13691 Jy ![Exited script file: muppet] wmap "J0958-2655_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.108 x 15.38 at -22.45 degrees (North through East) ! Clean map min=-0.0027579 max=0.098338 Jy/beam ! Writing clean map to FITS file: J0958-2655_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0983379 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221238 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.674931 0.674931 1.34986 2.69972 5.39945 10.7989 21.5978 43.1956 86.3912 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.108 x 15.38 at -22.45 degrees (North through East) ! Clean map min=-0.0027579 max=0.098338 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0958-2655_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:09:32 2019