! Started logfile: J0958+6533_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:45:17 2019 obs J0958+6533_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0958+6533_S_2017_05_31_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.709402 visibilities/baseline/integration-bin. ! Found source: J0958+6533 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 1660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0958+6533_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.291645Jy sigma=0.002049 ! Fit after self-cal, rms=0.273976Jy sigma=0.001927 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=19.2 mas, bpa=-56.48 degrees ! Estimated noise=4121.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.58351 Jy ! Component: 100 - total flux cleaned = 0.710762 Jy ! Total flux subtracted in 100 components = 0.710762 Jy ! Clean residual min=-0.018356 max=0.035536 Jy/beam ! Clean residual mean=-0.000126 rms=0.006300 Jy/beam ! Combined flux in latest and established models = 0.710762 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.710762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114896Jy sigma=0.000784 ! Fit after self-cal, rms=0.114899Jy sigma=0.000784 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=18.65 mas, bpa=-56.32 degrees ! Estimated noise=2796.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0324406 Jy ! Component: 100 - total flux cleaned = 0.0442419 Jy ! Component: 150 - total flux cleaned = 0.0479593 Jy ! Component: 200 - total flux cleaned = 0.0487193 Jy ! Total flux subtracted in 200 components = 0.0487193 Jy ! Clean residual min=-0.012852 max=0.011876 Jy/beam ! Clean residual mean=-0.000046 rms=0.003335 Jy/beam ! Combined flux in latest and established models = 0.759482 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.759482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105022Jy sigma=0.000716 ! Fit after self-cal, rms=0.104947Jy sigma=0.000716 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.96 KP 1.03 ! LA 0.99 MK 1.00* NL 0.88 OV 1.01 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.01 KP 1.00 ! LA 0.99 MK 1.00* NL 1.02 OV 1.01 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 1.00 KP 0.99 ! LA 0.96 MK 1.00* NL 0.97 OV 0.99 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.01 KP 1.00* ! LA 1.07 MK 1.00* NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.104947Jy sigma=0.000716 ! Fit after self-cal, rms=0.095136Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.879 mas, bmaj=18.63 mas, bpa=-56.27 degrees ! Estimated noise=2781.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731537 Jy ! Component: 100 - total flux cleaned = 0.0100421 Jy ! Component: 150 - total flux cleaned = 0.0115587 Jy ! Component: 200 - total flux cleaned = 0.0129079 Jy ! Total flux subtracted in 200 components = 0.0129079 Jy ! Clean residual min=-0.006075 max=0.006019 Jy/beam ! Clean residual mean=-0.000013 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 0.77239 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.77239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094497Jy sigma=0.000647 ! Fit after self-cal, rms=0.094473Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094473Jy sigma=0.000647 ! Fit after self-cal, rms=0.094382Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=18.62 mas, bpa=-56.27 degrees ! Estimated noise=2780.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287284 Jy ! Component: 100 - total flux cleaned = 0.00395607 Jy ! Component: 150 - total flux cleaned = 0.00495992 Jy ! Component: 200 - total flux cleaned = 0.00543661 Jy ! Total flux subtracted in 200 components = 0.00543661 Jy ! Clean residual min=-0.005884 max=0.005746 Jy/beam ! Clean residual mean=-0.000009 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.777826 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.777826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094229Jy sigma=0.000646 ! Fit after self-cal, rms=0.094223Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572532 Jy ! Component: 100 - total flux cleaned = 0.000744233 Jy ! Component: 150 - total flux cleaned = 0.000850715 Jy ! Component: 200 - total flux cleaned = 0.000900443 Jy ! Total flux subtracted in 200 components = 0.000900443 Jy ! Clean residual min=-0.006099 max=0.005870 Jy/beam ! Clean residual mean=-0.000005 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.778726 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 0.778726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094167Jy sigma=0.000645 ! Fit after self-cal, rms=0.094167Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094167Jy sigma=0.000645 ! Fit after self-cal, rms=0.094137Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=18.63 mas, bpa=-56.26 degrees ! Estimated noise=2780.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001585 Jy ! Component: 100 - total flux cleaned = 0.00217431 Jy ! Component: 150 - total flux cleaned = 0.00236835 Jy ! Component: 200 - total flux cleaned = 0.0025071 Jy ! Total flux subtracted in 200 components = 0.0025071 Jy ! Clean residual min=-0.005824 max=0.005941 Jy/beam ! Clean residual mean=-0.000004 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.781233 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 0.781233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094083Jy sigma=0.000645 ! Fit after self-cal, rms=0.094083Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133916 Jy ! Component: 100 - total flux cleaned = 0.000215667 Jy ! Component: 150 - total flux cleaned = 0.000294165 Jy ! Component: 200 - total flux cleaned = 0.000370212 Jy ! Total flux subtracted in 200 components = 0.000370212 Jy ! Clean residual min=-0.005891 max=0.005980 Jy/beam ! Clean residual mean=-0.000003 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.781604 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 0.781604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094054Jy sigma=0.000644 ! Fit after self-cal, rms=0.094054Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094054Jy sigma=0.000644 ! Fit after self-cal, rms=0.094065Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.349 mas, bmaj=19.3 mas, bpa=-52.83 degrees ! Estimated noise=3258.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204812 Jy ! Component: 100 - total flux cleaned = 0.00290139 Jy ! Component: 150 - total flux cleaned = 0.00331329 Jy ! Component: 200 - total flux cleaned = 0.00367593 Jy ! Total flux subtracted in 200 components = 0.00367593 Jy ! Clean residual min=-0.005977 max=0.006196 Jy/beam ! Clean residual mean=0.000002 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 0.78528 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.78528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094044Jy sigma=0.000644 ! Fit after self-cal, rms=0.094044Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157619 Jy ! Component: 100 - total flux cleaned = 0.000313012 Jy ! Component: 150 - total flux cleaned = 0.000456046 Jy ! Component: 200 - total flux cleaned = 0.000556544 Jy ! Total flux subtracted in 200 components = 0.000556544 Jy ! Clean residual min=-0.005917 max=0.006198 Jy/beam ! Clean residual mean=0.000005 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.785836 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 118 components and 0.785836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094045Jy sigma=0.000644 ! Fit after self-cal, rms=0.094044Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=18.62 mas, bpa=-56.26 degrees ! Estimated noise=2781.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.869 x 18.62 at -56.26 degrees (North through East) ! Clean map min=-0.0086724 max=0.74549 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094044Jy sigma=0.000644 ! Fit after self-cal, rms=0.086406Jy sigma=0.000588 ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=18.62 mas, bpa=-56.25 degrees ! Estimated noise=2780.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216719 Jy ! Component: 100 - total flux cleaned = -3.03256e-05 Jy ! Component: 150 - total flux cleaned = 1.0392e-05 Jy ! Component: 200 - total flux cleaned = 4.85239e-05 Jy ! Total flux subtracted in 200 components = 4.85239e-05 Jy ! Clean residual min=-0.005810 max=0.006037 Jy/beam ! Clean residual mean=0.000002 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.785885 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 0.785885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086363Jy sigma=0.000588 ! Fit after self-cal, rms=0.086363Jy sigma=0.000588 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.17529e-05 Jy ! Component: 100 - total flux cleaned = -1.11492e-05 Jy ! Component: 150 - total flux cleaned = -4.07081e-05 Jy ! Component: 200 - total flux cleaned = -4.1441e-05 Jy ! Total flux subtracted in 200 components = -4.1441e-05 Jy ! Clean residual min=-0.005673 max=0.005996 Jy/beam ! Clean residual mean=0.000003 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 0.785843 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 145 components and 0.785844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086345Jy sigma=0.000588 ! Fit after self-cal, rms=0.086345Jy sigma=0.000588 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086345Jy sigma=0.000588 ! Fit after self-cal, rms=0.086346Jy sigma=0.000588 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=19.21 mas, bpa=-56.41 degrees ! Estimated noise=4089.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.578354 Jy ! Component: 100 - total flux cleaned = 0.704489 Jy ! Component: 150 - total flux cleaned = 0.738261 Jy ! Component: 200 - total flux cleaned = 0.755614 Jy ! Total flux subtracted in 200 components = 0.755614 Jy ! Clean residual min=-0.011572 max=0.011109 Jy/beam ! Clean residual mean=-0.000063 rms=0.003524 Jy/beam ! Combined flux in latest and established models = 0.755614 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.755614 Jy ! Inverting map and beam ! Estimated beam: bmin=3.864 mas, bmaj=18.62 mas, bpa=-56.25 degrees ! Estimated noise=2781.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011466 Jy ! Component: 100 - total flux cleaned = 0.0154448 Jy ! Component: 150 - total flux cleaned = 0.0186313 Jy ! Component: 200 - total flux cleaned = 0.0212252 Jy ! Total flux subtracted in 200 components = 0.0212252 Jy ! Clean residual min=-0.006113 max=0.006431 Jy/beam ! Clean residual mean=-0.000030 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.77684 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 49 components and 0.77684 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.347 mas, bmaj=19.3 mas, bpa=-52.8 degrees ! Estimated noise=3260.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028023 Jy ! Component: 100 - total flux cleaned = 0.00395608 Jy ! Component: 150 - total flux cleaned = 0.00497635 Jy ! Component: 200 - total flux cleaned = 0.0057763 Jy ! Total flux subtracted in 200 components = 0.0057763 Jy ! Clean residual min=-0.006734 max=0.006029 Jy/beam ! Clean residual mean=-0.000021 rms=0.001918 Jy/beam ! Combined flux in latest and established models = 0.782616 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000818791 Jy ! Component: 100 - total flux cleaned = 0.00155071 Jy ! Component: 150 - total flux cleaned = 0.00212676 Jy ! Component: 200 - total flux cleaned = 0.00271915 Jy ! Total flux subtracted in 200 components = 0.00271915 Jy ! Clean residual min=-0.006435 max=0.006259 Jy/beam ! Clean residual mean=-0.000007 rms=0.001791 Jy/beam ! Combined flux in latest and established models = 0.785335 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 88 components and 0.785335 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.864 mas, bmaj=18.62 mas, bpa=-56.25 degrees ! Estimated noise=2781.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100496 Jy ! Component: 100 - total flux cleaned = 0.00108356 Jy ! Component: 150 - total flux cleaned = 0.00115 Jy ! Component: 200 - total flux cleaned = 0.00131697 Jy ! Total flux subtracted in 200 components = 0.00131697 Jy ! Clean residual min=-0.005858 max=0.005850 Jy/beam ! Clean residual mean=-0.000000 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.786652 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.786652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086420Jy sigma=0.000588 ! Fit after self-cal, rms=0.086418Jy sigma=0.000588 wmodel J0958+6533_S_2017_05_31_pus_map.mod ! Writing 102 model components to file: J0958+6533_S_2017_05_31_pus_map.mod wobs J0958+6533_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0958+6533_S_2017_05_31_pus_uvs.fits wwins J0958+6533_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J0958+6533_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.61976e-05 Jy ! Component: 100 - total flux cleaned = 0.000540693 Jy ! Component: 150 - total flux cleaned = 0.000380853 Jy ! Component: 200 - total flux cleaned = -0.000232553 Jy ! Component: 250 - total flux cleaned = -0.000813167 Jy ! Component: 300 - total flux cleaned = -0.000950897 Jy ! Component: 350 - total flux cleaned = -0.00101887 Jy ! Component: 400 - total flux cleaned = -0.00120993 Jy ! Component: 450 - total flux cleaned = -0.00127012 Jy ! Component: 500 - total flux cleaned = -0.00115508 Jy ! Component: 550 - total flux cleaned = -0.00126634 Jy ! Component: 600 - total flux cleaned = -0.00131947 Jy ! Component: 650 - total flux cleaned = -0.0014239 Jy ! Component: 700 - total flux cleaned = -0.0014226 Jy ! Component: 750 - total flux cleaned = -0.00152198 Jy ! Component: 800 - total flux cleaned = -0.00166778 Jy ! Component: 850 - total flux cleaned = -0.00190506 Jy ! Component: 900 - total flux cleaned = -0.00218272 Jy ! Component: 950 - total flux cleaned = -0.0023188 Jy ! Component: 1000 - total flux cleaned = -0.0025851 Jy ! Component: 1050 - total flux cleaned = -0.00275835 Jy ! Component: 1100 - total flux cleaned = -0.00275825 Jy ! Component: 1150 - total flux cleaned = -0.0029697 Jy ! Component: 1200 - total flux cleaned = -0.00313499 Jy ! Component: 1250 - total flux cleaned = -0.00325759 Jy ! Component: 1300 - total flux cleaned = -0.00341848 Jy ! Component: 1350 - total flux cleaned = -0.00361607 Jy ! Component: 1400 - total flux cleaned = -0.00388827 Jy ! Component: 1450 - total flux cleaned = -0.00407949 Jy ! Component: 1500 - total flux cleaned = -0.00411781 Jy ! Component: 1550 - total flux cleaned = -0.0043051 Jy ! Component: 1600 - total flux cleaned = -0.00445257 Jy ! Component: 1650 - total flux cleaned = -0.00466934 Jy ! Component: 1700 - total flux cleaned = -0.00474028 Jy ! Component: 1750 - total flux cleaned = -0.00488122 Jy ! Component: 1800 - total flux cleaned = -0.00502 Jy ! Component: 1850 - total flux cleaned = -0.0051225 Jy ! Component: 1900 - total flux cleaned = -0.00529145 Jy ! Component: 1950 - total flux cleaned = -0.00545831 Jy ! Component: 2000 - total flux cleaned = -0.00565672 Jy ! Component: 2050 - total flux cleaned = -0.00575475 Jy ! Component: 2100 - total flux cleaned = -0.00588434 Jy ! Component: 2150 - total flux cleaned = -0.00601239 Jy ! Component: 2200 - total flux cleaned = -0.00613921 Jy ! Component: 2250 - total flux cleaned = -0.00620198 Jy ! Component: 2300 - total flux cleaned = -0.00632604 Jy ! Component: 2350 - total flux cleaned = -0.00638724 Jy ! Component: 2400 - total flux cleaned = -0.00641771 Jy ! Component: 2450 - total flux cleaned = -0.00644815 Jy ! Component: 2500 - total flux cleaned = -0.00644832 Jy ! Component: 2550 - total flux cleaned = -0.00647818 Jy ! Component: 2600 - total flux cleaned = -0.00641945 Jy ! Component: 2650 - total flux cleaned = -0.00650711 Jy ! Component: 2700 - total flux cleaned = -0.00647781 Jy ! Component: 2750 - total flux cleaned = -0.00647757 Jy ! Component: 2800 - total flux cleaned = -0.00650627 Jy ! Component: 2850 - total flux cleaned = -0.00647792 Jy ! Component: 2900 - total flux cleaned = -0.00656264 Jy ! Component: 2950 - total flux cleaned = -0.00667479 Jy ! Component: 3000 - total flux cleaned = -0.00664702 Jy ! Component: 3050 - total flux cleaned = -0.00667491 Jy ! Component: 3100 - total flux cleaned = -0.00678529 Jy ! Component: 3150 - total flux cleaned = -0.00681279 Jy ! Component: 3200 - total flux cleaned = -0.00673076 Jy ! Component: 3250 - total flux cleaned = -0.00675799 Jy ! Component: 3300 - total flux cleaned = -0.006758 Jy ! Component: 3350 - total flux cleaned = -0.00673105 Jy ! Component: 3400 - total flux cleaned = -0.00673099 Jy ! Component: 3450 - total flux cleaned = -0.00667726 Jy ! Component: 3500 - total flux cleaned = -0.00675763 Jy ! Component: 3550 - total flux cleaned = -0.00673092 Jy ! Component: 3600 - total flux cleaned = -0.00673089 Jy ! Component: 3650 - total flux cleaned = -0.00673097 Jy ! Component: 3700 - total flux cleaned = -0.00675773 Jy ! Component: 3750 - total flux cleaned = -0.00675789 Jy ! Component: 3800 - total flux cleaned = -0.00675784 Jy ! Component: 3850 - total flux cleaned = -0.00681126 Jy ! Component: 3900 - total flux cleaned = -0.00681144 Jy ! Component: 3950 - total flux cleaned = -0.00681133 Jy ! Component: 4000 - total flux cleaned = -0.00683815 Jy ! Component: 4050 - total flux cleaned = -0.00686494 Jy ! Total flux subtracted in 4096 components = -0.00686513 Jy ! Clean residual min=-0.001472 max=0.001522 Jy/beam ! Clean residual mean=0.000011 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.779787 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 383 components and 0.779787 Jy ![Exited script file: muppet] wmap "J0958+6533_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.864 x 18.62 at -56.25 degrees (North through East) ! Clean map min=-0.008248 max=0.74226 Jy/beam ! Writing clean map to FITS file: J0958+6533_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.742258 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00044455 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.179675 0.179675 0.35935 0.718699 1.4374 2.8748 5.74959 11.4992 22.9984 45.9967 91.9935 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.742 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.864 x 18.62 at -56.25 degrees (North through East) ! Clean map min=-0.008248 max=0.74226 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0958+6533_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:45:23 2019