! Started logfile: J0958+6533_S_2017_01_21_pus_uvs.log on Sun May 5 15:51:49 2019 obs J0958+6533_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0958+6533_S_2017_01_21_pus_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.659722 visibilities/baseline/integration-bin. ! Found source: J0958+6533 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0958+6533_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.387795Jy sigma=0.002192 ! Fit after self-cal, rms=0.381797Jy sigma=0.002154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=20.11 mas, bpa=-43.94 degrees ! Estimated noise=4251.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.515532 Jy ! Component: 100 - total flux cleaned = 0.629164 Jy ! Total flux subtracted in 100 components = 0.629164 Jy ! Clean residual min=-0.022262 max=0.036288 Jy/beam ! Clean residual mean=0.000001 rms=0.007201 Jy/beam ! Combined flux in latest and established models = 0.629165 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.629165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141507Jy sigma=0.000802 ! Fit after self-cal, rms=0.141181Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=19.94 mas, bpa=-43.01 degrees ! Estimated noise=3333.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271185 Jy ! Component: 100 - total flux cleaned = 0.0217957 Jy ! Component: 150 - total flux cleaned = 0.0175339 Jy ! Component: 200 - total flux cleaned = 0.0136554 Jy ! Total flux subtracted in 200 components = 0.0136554 Jy ! Clean residual min=-0.018640 max=0.026652 Jy/beam ! Clean residual mean=0.000102 rms=0.005954 Jy/beam ! Combined flux in latest and established models = 0.64282 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 51 components and 0.64282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133449Jy sigma=0.000741 ! Fit after self-cal, rms=0.133403Jy sigma=0.000740 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 0.94 LA 1.18 ! MK 1.00* NL 0.97 OV 1.00 PT 0.95 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.99 LA 1.14 ! MK 1.00* NL 0.96 OV 1.02 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.98 LA 1.10 ! MK 1.00* NL 0.96 OV 0.93 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 0.98 LA 1.24 ! MK 1.00* NL 1.00* OV 0.94 PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.133403Jy sigma=0.000740 ! Fit after self-cal, rms=0.123533Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.752 mas, bmaj=20.1 mas, bpa=-43.12 degrees ! Estimated noise=3305.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00917602 Jy ! Component: 100 - total flux cleaned = 0.0118219 Jy ! Component: 150 - total flux cleaned = 0.0136733 Jy ! Component: 200 - total flux cleaned = 0.0148932 Jy ! Total flux subtracted in 200 components = 0.0148932 Jy ! Clean residual min=-0.006909 max=0.007931 Jy/beam ! Clean residual mean=0.000031 rms=0.002054 Jy/beam ! Combined flux in latest and established models = 0.657713 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 85 components and 0.657713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122595Jy sigma=0.000654 ! Fit after self-cal, rms=0.122754Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122754Jy sigma=0.000653 ! Fit after self-cal, rms=0.122703Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=20.11 mas, bpa=-43.13 degrees ! Estimated noise=3301.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260721 Jy ! Component: 100 - total flux cleaned = 0.00405195 Jy ! Component: 150 - total flux cleaned = 0.00518093 Jy ! Component: 200 - total flux cleaned = 0.00575903 Jy ! Total flux subtracted in 200 components = 0.00575903 Jy ! Clean residual min=-0.006639 max=0.008038 Jy/beam ! Clean residual mean=0.000030 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 0.663472 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.663472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122508Jy sigma=0.000652 ! Fit after self-cal, rms=0.122507Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345104 Jy ! Component: 100 - total flux cleaned = 0.000793037 Jy ! Component: 150 - total flux cleaned = 0.000795599 Jy ! Component: 200 - total flux cleaned = 0.000859374 Jy ! Total flux subtracted in 200 components = 0.000859374 Jy ! Clean residual min=-0.006675 max=0.007977 Jy/beam ! Clean residual mean=0.000029 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.664332 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.664332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122421Jy sigma=0.000652 ! Fit after self-cal, rms=0.122423Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122423Jy sigma=0.000652 ! Fit after self-cal, rms=0.122574Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=20.12 mas, bpa=-43.13 degrees ! Estimated noise=3303.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013842 Jy ! Component: 100 - total flux cleaned = 0.00181908 Jy ! Component: 150 - total flux cleaned = 0.0019326 Jy ! Component: 200 - total flux cleaned = 0.00204224 Jy ! Total flux subtracted in 200 components = 0.00204224 Jy ! Clean residual min=-0.006653 max=0.007871 Jy/beam ! Clean residual mean=0.000028 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.666374 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 127 components and 0.666374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122509Jy sigma=0.000651 ! Fit after self-cal, rms=0.122515Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-121.5, 73). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00690962 Jy ! Component: 100 - total flux cleaned = 0.00926393 Jy ! Component: 150 - total flux cleaned = 0.0101095 Jy ! Component: 200 - total flux cleaned = 0.0109211 Jy ! Total flux subtracted in 200 components = 0.0109211 Jy ! Clean residual min=-0.007381 max=0.007092 Jy/beam ! Clean residual mean=0.000018 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.677295 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 158 components and 0.677295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121925Jy sigma=0.000648 ! Fit after self-cal, rms=0.121904Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121904Jy sigma=0.000648 ! Fit after self-cal, rms=0.121867Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.981 mas, bmaj=20.69 mas, bpa=-37.99 degrees ! Estimated noise=3954.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169083 Jy ! Component: 100 - total flux cleaned = 0.00350913 Jy ! Component: 150 - total flux cleaned = 0.0049006 Jy ! Component: 200 - total flux cleaned = 0.00591121 Jy ! Total flux subtracted in 200 components = 0.00591121 Jy ! Clean residual min=-0.005821 max=0.006690 Jy/beam ! Clean residual mean=0.000030 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 0.683206 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 194 components and 0.683206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121771Jy sigma=0.000647 ! Fit after self-cal, rms=0.121765Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691054 Jy ! Component: 100 - total flux cleaned = 0.00138144 Jy ! Component: 150 - total flux cleaned = 0.00173424 Jy ! Component: 200 - total flux cleaned = 0.0022882 Jy ! Total flux subtracted in 200 components = 0.0022882 Jy ! Clean residual min=-0.005620 max=0.006539 Jy/beam ! Clean residual mean=0.000029 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.685495 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 221 components and 0.685494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121723Jy sigma=0.000647 ! Fit after self-cal, rms=0.121719Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=20.12 mas, bpa=-43.14 degrees ! Estimated noise=3300.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.742 x 20.12 at -43.14 degrees (North through East) ! Clean map min=-0.0083822 max=0.64867 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121719Jy sigma=0.000647 ! Fit after self-cal, rms=0.112967Jy sigma=0.000589 ! Inverting map and beam ! Estimated beam: bmin=3.743 mas, bmaj=20.11 mas, bpa=-43.14 degrees ! Estimated noise=3300.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246394 Jy ! Component: 100 - total flux cleaned = 0.00022309 Jy ! Component: 150 - total flux cleaned = 0.000806591 Jy ! Component: 200 - total flux cleaned = 0.0013465 Jy ! Total flux subtracted in 200 components = 0.0013465 Jy ! Clean residual min=-0.007017 max=0.007341 Jy/beam ! Clean residual mean=0.000017 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.686841 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 251 components and 0.686841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112867Jy sigma=0.000588 ! Fit after self-cal, rms=0.112862Jy sigma=0.000588 ! Inverting map ! Added new window around map position (33, 105). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436485 Jy ! Component: 100 - total flux cleaned = -1.17975e-05 Jy ! Component: 150 - total flux cleaned = -0.000551426 Jy ! Component: 200 - total flux cleaned = -0.000706069 Jy ! Total flux subtracted in 200 components = -0.000706069 Jy ! Clean residual min=-0.004823 max=0.005149 Jy/beam ! Clean residual mean=0.000015 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.686135 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 289 components and 0.686135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112065Jy sigma=0.000583 ! Fit after self-cal, rms=0.112027Jy sigma=0.000583 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112027Jy sigma=0.000583 ! Fit after self-cal, rms=0.112069Jy sigma=0.000583 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=20.34 mas, bpa=-44.01 degrees ! Estimated noise=4163.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.504196 Jy ! Component: 100 - total flux cleaned = 0.61449 Jy ! Component: 150 - total flux cleaned = 0.646122 Jy ! Component: 200 - total flux cleaned = 0.662724 Jy ! Total flux subtracted in 200 components = 0.662724 Jy ! Clean residual min=-0.010989 max=0.012440 Jy/beam ! Clean residual mean=-0.000004 rms=0.003133 Jy/beam ! Combined flux in latest and established models = 0.662724 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.662724 Jy ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=20.11 mas, bpa=-43.15 degrees ! Estimated noise=3299.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114108 Jy ! Component: 100 - total flux cleaned = 0.0165122 Jy ! Component: 150 - total flux cleaned = 0.0198116 Jy ! Component: 200 - total flux cleaned = 0.0218288 Jy ! Total flux subtracted in 200 components = 0.0218288 Jy ! Clean residual min=-0.007452 max=0.007454 Jy/beam ! Clean residual mean=0.000024 rms=0.001968 Jy/beam ! Combined flux in latest and established models = 0.684553 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 85 components and 0.684553 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.978 mas, bmaj=20.68 mas, bpa=-38 degrees ! Estimated noise=3954.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195422 Jy ! Component: 100 - total flux cleaned = 4.18624e-05 Jy ! Component: 150 - total flux cleaned = -0.00218679 Jy ! Component: 200 - total flux cleaned = -0.0031649 Jy ! Total flux subtracted in 200 components = -0.0031649 Jy ! Clean residual min=-0.005568 max=0.006827 Jy/beam ! Clean residual mean=0.000039 rms=0.001595 Jy/beam ! Combined flux in latest and established models = 0.681388 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (127.5, -56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418627 Jy ! Component: 100 - total flux cleaned = 0.0060039 Jy ! Component: 150 - total flux cleaned = 0.00680567 Jy ! Component: 200 - total flux cleaned = 0.0080526 Jy ! Total flux subtracted in 200 components = 0.0080526 Jy ! Clean residual min=-0.004912 max=0.004594 Jy/beam ! Clean residual mean=0.000028 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.68944 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 175 components and 0.68944 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=20.11 mas, bpa=-43.15 degrees ! Estimated noise=3299.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405683 Jy ! Component: 100 - total flux cleaned = 0.0052615 Jy ! Component: 150 - total flux cleaned = 0.0061942 Jy ! Component: 200 - total flux cleaned = 0.00736594 Jy ! Total flux subtracted in 200 components = 0.00736594 Jy ! Clean residual min=-0.004509 max=0.005506 Jy/beam ! Clean residual mean=0.000013 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.696806 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 213 components and 0.696806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112307Jy sigma=0.000585 ! Fit after self-cal, rms=0.112265Jy sigma=0.000584 wmodel J0958+6533_S_2017_01_21_pus_map.mod ! Writing 213 model components to file: J0958+6533_S_2017_01_21_pus_map.mod wobs J0958+6533_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0958+6533_S_2017_01_21_pus_uvs.fits wwins J0958+6533_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J0958+6533_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560925 Jy ! Component: 100 - total flux cleaned = 0.00055971 Jy ! Component: 150 - total flux cleaned = 0.000791965 Jy ! Component: 200 - total flux cleaned = 0.00043104 Jy ! Component: 250 - total flux cleaned = 8.24246e-05 Jy ! Component: 300 - total flux cleaned = -0.000255223 Jy ! Component: 350 - total flux cleaned = -0.000385521 Jy ! Component: 400 - total flux cleaned = -0.00038441 Jy ! Component: 450 - total flux cleaned = -0.000322739 Jy ! Component: 500 - total flux cleaned = -0.000323422 Jy ! Component: 550 - total flux cleaned = -0.000499594 Jy ! Component: 600 - total flux cleaned = -0.000613788 Jy ! Component: 650 - total flux cleaned = -0.000613287 Jy ! Component: 700 - total flux cleaned = -0.000559289 Jy ! Component: 750 - total flux cleaned = -0.000669628 Jy ! Component: 800 - total flux cleaned = -0.000722632 Jy ! Component: 850 - total flux cleaned = -0.000669564 Jy ! Component: 900 - total flux cleaned = -0.000618092 Jy ! Component: 950 - total flux cleaned = -0.000618386 Jy ! Component: 1000 - total flux cleaned = -0.000569067 Jy ! Component: 1050 - total flux cleaned = -0.000667385 Jy ! Component: 1100 - total flux cleaned = -0.000618349 Jy ! Component: 1150 - total flux cleaned = -0.000523421 Jy ! Component: 1200 - total flux cleaned = -0.000570853 Jy ! Component: 1250 - total flux cleaned = -0.000616898 Jy ! Component: 1300 - total flux cleaned = -0.000571159 Jy ! Component: 1350 - total flux cleaned = -0.000571623 Jy ! Component: 1400 - total flux cleaned = -0.000660764 Jy ! Component: 1450 - total flux cleaned = -0.000748003 Jy ! Component: 1500 - total flux cleaned = -0.000877702 Jy ! Component: 1550 - total flux cleaned = -0.000962992 Jy ! Component: 1600 - total flux cleaned = -0.00109038 Jy ! Component: 1650 - total flux cleaned = -0.00117423 Jy ! Component: 1700 - total flux cleaned = -0.00117474 Jy ! Component: 1750 - total flux cleaned = -0.00129809 Jy ! Component: 1800 - total flux cleaned = -0.0011756 Jy ! Component: 1850 - total flux cleaned = -0.00121631 Jy ! Component: 1900 - total flux cleaned = -0.00125594 Jy ! Component: 1950 - total flux cleaned = -0.00105845 Jy ! Component: 2000 - total flux cleaned = -0.00105829 Jy ! Component: 2050 - total flux cleaned = -0.000864942 Jy ! Component: 2100 - total flux cleaned = -0.00086521 Jy ! Component: 2150 - total flux cleaned = -0.000826918 Jy ! Component: 2200 - total flux cleaned = -0.00075125 Jy ! Component: 2250 - total flux cleaned = -0.000714354 Jy ! Component: 2300 - total flux cleaned = -0.000677534 Jy ! Component: 2350 - total flux cleaned = -0.000750694 Jy ! Component: 2400 - total flux cleaned = -0.000750835 Jy ! Component: 2450 - total flux cleaned = -0.000823439 Jy ! Component: 2500 - total flux cleaned = -0.00085929 Jy ! Component: 2550 - total flux cleaned = -0.000929868 Jy ! Component: 2600 - total flux cleaned = -0.00099987 Jy ! Component: 2650 - total flux cleaned = -0.00110389 Jy ! Component: 2700 - total flux cleaned = -0.00117264 Jy ! Component: 2750 - total flux cleaned = -0.00130906 Jy ! Component: 2800 - total flux cleaned = -0.00124142 Jy ! Component: 2850 - total flux cleaned = -0.00140924 Jy ! Component: 2900 - total flux cleaned = -0.00140896 Jy ! Component: 2950 - total flux cleaned = -0.00150818 Jy ! Component: 3000 - total flux cleaned = -0.00157404 Jy ! Component: 3050 - total flux cleaned = -0.00170376 Jy ! Component: 3100 - total flux cleaned = -0.0017038 Jy ! Component: 3150 - total flux cleaned = -0.00179974 Jy ! Component: 3200 - total flux cleaned = -0.0017998 Jy ! Component: 3250 - total flux cleaned = -0.00189461 Jy ! Component: 3300 - total flux cleaned = -0.00189517 Jy ! Component: 3350 - total flux cleaned = -0.0020502 Jy ! Component: 3400 - total flux cleaned = -0.00205015 Jy ! Component: 3450 - total flux cleaned = -0.00211131 Jy ! Component: 3500 - total flux cleaned = -0.00214186 Jy ! Component: 3550 - total flux cleaned = -0.00223251 Jy ! Component: 3600 - total flux cleaned = -0.00229292 Jy ! Component: 3650 - total flux cleaned = -0.00235209 Jy ! Component: 3700 - total flux cleaned = -0.00229339 Jy ! Component: 3750 - total flux cleaned = -0.00238179 Jy ! Component: 3800 - total flux cleaned = -0.00243994 Jy ! Component: 3850 - total flux cleaned = -0.00249784 Jy ! Component: 3900 - total flux cleaned = -0.0025266 Jy ! Component: 3950 - total flux cleaned = -0.00249813 Jy ! Component: 4000 - total flux cleaned = -0.00261154 Jy ! Component: 4050 - total flux cleaned = -0.00261177 Jy ! Total flux subtracted in 4096 components = -0.0027235 Jy ! Clean residual min=-0.001546 max=0.001532 Jy/beam ! Clean residual mean=0.000007 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.694082 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 520 components and 0.694082 Jy ![Exited script file: muppet] wmap "J0958+6533_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.741 x 20.11 at -43.15 degrees (North through East) ! Clean map min=-0.0049713 max=0.64499 Jy/beam ! Writing clean map to FITS file: J0958+6533_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.644995 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000572077 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.266084 0.266084 0.532169 1.06434 2.12867 4.25735 8.5147 17.0294 34.0588 68.1176 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.644 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.741 x 20.11 at -43.15 degrees (North through East) ! Clean map min=-0.0049713 max=0.64499 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0958+6533_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:51:54 2019