! Started logfile: J0958+3224_S_2017_01_21_pus_uvs.log on Sun May 5 15:51:40 2019 obs J0958+3224_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0958+3224_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.854167 visibilities/baseline/integration-bin. ! Found source: J0958+3224 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0958+3224_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.572128Jy sigma=0.004949 ! Fit after self-cal, rms=0.568299Jy sigma=0.004919 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=7.931 mas, bpa=24.64 degrees ! Estimated noise=3229.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.361125 Jy ! Component: 100 - total flux cleaned = 0.478367 Jy ! Total flux subtracted in 100 components = 0.478367 Jy ! Clean residual min=-0.045832 max=0.069627 Jy/beam ! Clean residual mean=-0.000207 rms=0.013984 Jy/beam ! Combined flux in latest and established models = 0.478367 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.478367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169134Jy sigma=0.001524 ! Fit after self-cal, rms=0.168579Jy sigma=0.001522 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=8.536 mas, bpa=27.7 degrees ! Estimated noise=2735.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0718025 Jy ! Component: 100 - total flux cleaned = 0.11248 Jy ! Component: 150 - total flux cleaned = 0.140348 Jy ! Component: 200 - total flux cleaned = 0.160493 Jy ! Total flux subtracted in 200 components = 0.160493 Jy ! Clean residual min=-0.032799 max=0.072163 Jy/beam ! Clean residual mean=-0.000091 rms=0.011465 Jy/beam ! Combined flux in latest and established models = 0.63886 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 0.63886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138012Jy sigma=0.001157 ! Fit after self-cal, rms=0.137376Jy sigma=0.001154 ! Inverting map ! Added new window around map position (-2, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0642039 Jy ! Component: 100 - total flux cleaned = 0.090791 Jy ! Component: 150 - total flux cleaned = 0.0996894 Jy ! Component: 200 - total flux cleaned = 0.105613 Jy ! Total flux subtracted in 200 components = 0.105613 Jy ! Clean residual min=-0.022227 max=0.031155 Jy/beam ! Clean residual mean=-0.000011 rms=0.006019 Jy/beam ! Combined flux in latest and established models = 0.744473 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 69 components and 0.744473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106016Jy sigma=0.000855 ! Fit after self-cal, rms=0.097940Jy sigma=0.000788 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.93 LA 1.00 ! MK 1.00 NL 0.97 OV 1.01 PT 0.96 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.99 LA 0.96 ! MK 1.06 NL 0.99 OV 1.05 PT 0.95 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 0.97 LA 1.00 ! MK 1.09 NL 0.98 OV 0.93 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.10 HN 1.01 LA 1.07 ! MK 1.05 NL 1.00* OV 1.06 PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.097940Jy sigma=0.000788 ! Fit after self-cal, rms=0.093733Jy sigma=0.000726 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=8.547 mas, bpa=27.95 degrees ! Estimated noise=2714.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35, 36). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204099 Jy ! Component: 100 - total flux cleaned = 0.0234174 Jy ! Component: 150 - total flux cleaned = 0.0206836 Jy ! Component: 200 - total flux cleaned = 0.018051 Jy ! Total flux subtracted in 200 components = 0.018051 Jy ! Clean residual min=-0.010622 max=0.010317 Jy/beam ! Clean residual mean=0.000022 rms=0.002721 Jy/beam ! Combined flux in latest and established models = 0.762524 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 99 components and 0.762524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088201Jy sigma=0.000677 ! Fit after self-cal, rms=0.087767Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087767Jy sigma=0.000674 ! Fit after self-cal, rms=0.087851Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.524 mas, bmaj=8.54 mas, bpa=27.94 degrees ! Estimated noise=2717.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050141 Jy ! Component: 100 - total flux cleaned = 0.0047539 Jy ! Component: 150 - total flux cleaned = 0.0039186 Jy ! Component: 200 - total flux cleaned = 0.00296374 Jy ! Total flux subtracted in 200 components = 0.00296374 Jy ! Clean residual min=-0.009453 max=0.008685 Jy/beam ! Clean residual mean=0.000018 rms=0.002255 Jy/beam ! Combined flux in latest and established models = 0.765488 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 119 components and 0.765488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086522Jy sigma=0.000662 ! Fit after self-cal, rms=0.086316Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000807862 Jy ! Component: 100 - total flux cleaned = -0.000383175 Jy ! Component: 150 - total flux cleaned = -0.000535814 Jy ! Component: 200 - total flux cleaned = -0.0011089 Jy ! Total flux subtracted in 200 components = -0.0011089 Jy ! Clean residual min=-0.008654 max=0.008367 Jy/beam ! Clean residual mean=0.000016 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 0.764379 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 133 components and 0.764379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085692Jy sigma=0.000656 ! Fit after self-cal, rms=0.085584Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085584Jy sigma=0.000655 ! Fit after self-cal, rms=0.085685Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=8.544 mas, bpa=27.92 degrees ! Estimated noise=2719.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162052 Jy ! Component: 100 - total flux cleaned = 0.00162622 Jy ! Component: 150 - total flux cleaned = 0.00137833 Jy ! Component: 200 - total flux cleaned = 0.00115247 Jy ! Total flux subtracted in 200 components = 0.00115247 Jy ! Clean residual min=-0.008065 max=0.007655 Jy/beam ! Clean residual mean=0.000017 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 0.765531 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 150 components and 0.765532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085283Jy sigma=0.000652 ! Fit after self-cal, rms=0.085225Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265283 Jy ! Component: 100 - total flux cleaned = 5.09567e-05 Jy ! Component: 150 - total flux cleaned = -0.000246702 Jy ! Component: 200 - total flux cleaned = -0.000720579 Jy ! Total flux subtracted in 200 components = -0.000720579 Jy ! Clean residual min=-0.007429 max=0.007376 Jy/beam ! Clean residual mean=0.000015 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.764811 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 160 components and 0.764811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084965Jy sigma=0.000649 ! Fit after self-cal, rms=0.084931Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084931Jy sigma=0.000649 ! Fit after self-cal, rms=0.084940Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.118 mas, bmaj=10.36 mas, bpa=19.52 degrees ! Estimated noise=3230.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00218233 Jy ! Component: 100 - total flux cleaned = -0.00306869 Jy ! Component: 150 - total flux cleaned = -0.00387041 Jy ! Component: 200 - total flux cleaned = -0.00436112 Jy ! Total flux subtracted in 200 components = -0.00436112 Jy ! Clean residual min=-0.005931 max=0.006738 Jy/beam ! Clean residual mean=0.000025 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.76045 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 176 components and 0.76045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084800Jy sigma=0.000648 ! Fit after self-cal, rms=0.084750Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.23945e-05 Jy ! Component: 100 - total flux cleaned = 0.000123931 Jy ! Component: 150 - total flux cleaned = 2.65436e-06 Jy ! Component: 200 - total flux cleaned = -0.000112082 Jy ! Total flux subtracted in 200 components = -0.000112082 Jy ! Clean residual min=-0.005944 max=0.006356 Jy/beam ! Clean residual mean=0.000024 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.760338 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 195 components and 0.760338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084678Jy sigma=0.000648 ! Fit after self-cal, rms=0.084649Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=8.549 mas, bpa=27.93 degrees ! Estimated noise=2718.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.521 x 8.549 at 27.93 degrees (North through East) ! Clean map min=-0.008862 max=0.45772 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=7.937 mas, bpa=24.9 degrees ! Estimated noise=3208.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.357313 Jy ! Component: 100 - total flux cleaned = 0.484242 Jy ! Component: 150 - total flux cleaned = 0.560084 Jy ! Component: 200 - total flux cleaned = 0.611515 Jy ! Total flux subtracted in 200 components = 0.611515 Jy ! Clean residual min=-0.022217 max=0.028372 Jy/beam ! Clean residual mean=-0.000105 rms=0.007419 Jy/beam ! Combined flux in latest and established models = 0.611516 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.611516 Jy ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=8.549 mas, bpa=27.93 degrees ! Estimated noise=2718.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.045591 Jy ! Component: 100 - total flux cleaned = 0.0760176 Jy ! Component: 150 - total flux cleaned = 0.0975787 Jy ! Component: 200 - total flux cleaned = 0.113465 Jy ! Total flux subtracted in 200 components = 0.113465 Jy ! Clean residual min=-0.011514 max=0.012084 Jy/beam ! Clean residual mean=-0.000043 rms=0.003306 Jy/beam ! Combined flux in latest and established models = 0.724981 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 71 components and 0.724981 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.118 mas, bmaj=10.36 mas, bpa=19.52 degrees ! Estimated noise=3230.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181866 Jy ! Component: 100 - total flux cleaned = 0.0273355 Jy ! Component: 150 - total flux cleaned = 0.0312927 Jy ! Component: 200 - total flux cleaned = 0.0338372 Jy ! Total flux subtracted in 200 components = 0.0338372 Jy ! Clean residual min=-0.008732 max=0.007498 Jy/beam ! Clean residual mean=0.000018 rms=0.002449 Jy/beam ! Combined flux in latest and established models = 0.758818 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562498 Jy ! Component: 100 - total flux cleaned = 0.000390695 Jy ! Component: 150 - total flux cleaned = 0.000243279 Jy ! Component: 200 - total flux cleaned = 0.000103579 Jy ! Total flux subtracted in 200 components = 0.000103579 Jy ! Clean residual min=-0.007071 max=0.006587 Jy/beam ! Clean residual mean=0.000021 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.758922 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 144 components and 0.758922 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=8.549 mas, bpa=27.93 degrees ! Estimated noise=2718.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000534715 Jy ! Component: 100 - total flux cleaned = -0.000207996 Jy ! Component: 150 - total flux cleaned = 0.00023284 Jy ! Component: 200 - total flux cleaned = 0.000483404 Jy ! Total flux subtracted in 200 components = 0.000483404 Jy ! Clean residual min=-0.007181 max=0.007116 Jy/beam ! Clean residual mean=0.000009 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 0.759405 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 165 components and 0.759405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085000Jy sigma=0.000650 ! Fit after self-cal, rms=0.084834Jy sigma=0.000648 wmodel J0958+3224_S_2017_01_21_pus_map.mod ! Writing 165 model components to file: J0958+3224_S_2017_01_21_pus_map.mod wobs J0958+3224_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0958+3224_S_2017_01_21_pus_uvs.fits wwins J0958+3224_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J0958+3224_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161928 Jy ! Component: 100 - total flux cleaned = 0.00218738 Jy ! Component: 150 - total flux cleaned = 0.00239131 Jy ! Component: 200 - total flux cleaned = 0.00238821 Jy ! Component: 250 - total flux cleaned = 0.00220266 Jy ! Component: 300 - total flux cleaned = 0.00211319 Jy ! Component: 350 - total flux cleaned = 0.0018624 Jy ! Component: 400 - total flux cleaned = 0.00201947 Jy ! Component: 450 - total flux cleaned = 0.00217206 Jy ! Component: 500 - total flux cleaned = 0.00209829 Jy ! Component: 550 - total flux cleaned = 0.00209705 Jy ! Component: 600 - total flux cleaned = 0.00188875 Jy ! Component: 650 - total flux cleaned = 0.00195716 Jy ! Component: 700 - total flux cleaned = 0.00202159 Jy ! Component: 750 - total flux cleaned = 0.0018281 Jy ! Component: 800 - total flux cleaned = 0.00188954 Jy ! Component: 850 - total flux cleaned = 0.00176779 Jy ! Component: 900 - total flux cleaned = 0.00159081 Jy ! Component: 950 - total flux cleaned = 0.00159121 Jy ! Component: 1000 - total flux cleaned = 0.0014224 Jy ! Component: 1050 - total flux cleaned = 0.00136682 Jy ! Component: 1100 - total flux cleaned = 0.0013125 Jy ! Component: 1150 - total flux cleaned = 0.00115395 Jy ! Component: 1200 - total flux cleaned = 0.00105078 Jy ! Component: 1250 - total flux cleaned = 0.0008999 Jy ! Component: 1300 - total flux cleaned = 0.000850438 Jy ! Component: 1350 - total flux cleaned = 0.000850229 Jy ! Component: 1400 - total flux cleaned = 0.000754703 Jy ! Component: 1450 - total flux cleaned = 0.000568428 Jy ! Component: 1500 - total flux cleaned = 0.000522498 Jy ! Component: 1550 - total flux cleaned = 0.000521985 Jy ! Component: 1600 - total flux cleaned = 0.00047884 Jy ! Component: 1650 - total flux cleaned = 0.000478896 Jy ! Component: 1700 - total flux cleaned = 0.00060711 Jy ! Component: 1750 - total flux cleaned = 0.000521956 Jy ! Component: 1800 - total flux cleaned = 0.000646484 Jy ! Component: 1850 - total flux cleaned = 0.000481928 Jy ! Component: 1900 - total flux cleaned = 0.000522618 Jy ! Component: 1950 - total flux cleaned = 0.000522224 Jy ! Component: 2000 - total flux cleaned = 0.000442304 Jy ! Component: 2050 - total flux cleaned = 0.00036428 Jy ! Component: 2100 - total flux cleaned = 0.000363824 Jy ! Component: 2150 - total flux cleaned = 0.000363104 Jy ! Component: 2200 - total flux cleaned = 0.000325302 Jy ! Component: 2250 - total flux cleaned = 0.000399225 Jy ! Component: 2300 - total flux cleaned = 0.000288863 Jy ! Component: 2350 - total flux cleaned = 0.000325352 Jy ! Component: 2400 - total flux cleaned = 0.000289673 Jy ! Component: 2450 - total flux cleaned = 0.000360499 Jy ! Component: 2500 - total flux cleaned = 0.00036031 Jy ! Component: 2550 - total flux cleaned = 0.000360966 Jy ! Component: 2600 - total flux cleaned = 0.000326586 Jy ! Component: 2650 - total flux cleaned = 0.000258139 Jy ! Component: 2700 - total flux cleaned = 0.000190283 Jy ! Component: 2750 - total flux cleaned = 2.19394e-05 Jy ! Component: 2800 - total flux cleaned = -0.000145116 Jy ! Component: 2850 - total flux cleaned = -0.000244437 Jy ! Component: 2900 - total flux cleaned = -0.000375937 Jy ! Component: 2950 - total flux cleaned = -0.000538989 Jy ! Component: 3000 - total flux cleaned = -0.000765339 Jy ! Component: 3050 - total flux cleaned = -0.000797747 Jy ! Component: 3100 - total flux cleaned = -0.00102099 Jy ! Component: 3150 - total flux cleaned = -0.00114796 Jy ! Component: 3200 - total flux cleaned = -0.00127389 Jy ! Component: 3250 - total flux cleaned = -0.00143033 Jy ! Component: 3300 - total flux cleaned = -0.00142997 Jy ! Component: 3350 - total flux cleaned = -0.00152279 Jy ! Component: 3400 - total flux cleaned = -0.00158447 Jy ! Component: 3450 - total flux cleaned = -0.00176797 Jy ! Component: 3500 - total flux cleaned = -0.00195038 Jy ! Component: 3550 - total flux cleaned = -0.00210175 Jy ! Component: 3600 - total flux cleaned = -0.00225206 Jy ! Component: 3650 - total flux cleaned = -0.00243186 Jy ! Component: 3700 - total flux cleaned = -0.00264069 Jy ! Component: 3750 - total flux cleaned = -0.00281883 Jy ! Component: 3800 - total flux cleaned = -0.00299651 Jy ! Component: 3850 - total flux cleaned = -0.00314403 Jy ! Component: 3900 - total flux cleaned = -0.00332027 Jy ! Component: 3950 - total flux cleaned = -0.00340808 Jy ! Component: 4000 - total flux cleaned = -0.00346647 Jy ! Component: 4050 - total flux cleaned = -0.00355375 Jy ! Total flux subtracted in 4096 components = -0.00366965 Jy ! Clean residual min=-0.001808 max=0.001725 Jy/beam ! Clean residual mean=-0.000002 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.755735 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 408 components and 0.755735 Jy ![Exited script file: muppet] wmap "J0958+3224_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.521 x 8.549 at 27.93 degrees (North through East) ! Clean map min=-0.0064269 max=0.45768 Jy/beam ! Writing clean map to FITS file: J0958+3224_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.457677 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000504806 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.330892 0.330892 0.661784 1.32357 2.64714 5.29427 10.5885 21.1771 42.3542 84.7084 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.457 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.521 x 8.549 at 27.93 degrees (North through East) ! Clean map min=-0.0064269 max=0.45768 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0958+3224_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:51:44 2019