! Started logfile: J0953-0840_S_2017_10_09_pus_uvs.log on Sun May 12 13:09:22 2019 obs J0953-0840_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0953-0840_S_2017_10_09_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.719349 visibilities/baseline/integration-bin. ! Found source: J0953-0840 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0953-0840_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 223 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 791 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003846Jy sigma=0.008059 ! Fit after self-cal, rms=0.952448Jy sigma=0.007660 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=13.35 mas, bpa=-17.29 degrees ! Estimated noise=1607.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390653 Jy ! Component: 100 - total flux cleaned = 0.0480827 Jy ! Total flux subtracted in 100 components = 0.0480827 Jy ! Clean residual min=-0.004068 max=0.003797 Jy/beam ! Clean residual mean=0.000000 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.0480827 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0480827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084929Jy sigma=0.000639 ! Fit after self-cal, rms=0.083356Jy sigma=0.000627 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=14.97 mas, bpa=-17.26 degrees ! Estimated noise=968.503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480626 Jy ! Component: 100 - total flux cleaned = 0.00529403 Jy ! Component: 150 - total flux cleaned = 0.00552097 Jy ! Component: 200 - total flux cleaned = 0.00552046 Jy ! Total flux subtracted in 200 components = 0.00552046 Jy ! Clean residual min=-0.002244 max=0.002431 Jy/beam ! Clean residual mean=-0.000005 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0536032 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.0536032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083015Jy sigma=0.000625 ! Fit after self-cal, rms=0.082970Jy sigma=0.000625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.97 KP 1.04 ! LA 1.05 MK 1.02 NL 0.98 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.96 HN 1.02 KP 1.10 ! LA 0.99 MK 1.05 NL 0.97 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.07 HN 0.99 KP 0.83 ! LA 0.82 MK 1.04 NL 1.09 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.76 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 0.80 ! ! ! Fit before self-cal, rms=0.082970Jy sigma=0.000625 ! Fit after self-cal, rms=0.081266Jy sigma=0.000625 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.373 mas, bmaj=14.94 mas, bpa=-17.21 degrees ! Estimated noise=972.006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277003 Jy ! Component: 100 - total flux cleaned = -0.000441197 Jy ! Component: 150 - total flux cleaned = -0.000526447 Jy ! Component: 200 - total flux cleaned = -0.000582187 Jy ! Total flux subtracted in 200 components = -0.000582187 Jy ! Clean residual min=-0.001898 max=0.002098 Jy/beam ! Clean residual mean=-0.000006 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.053021 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.053021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081249Jy sigma=0.000624 ! Fit after self-cal, rms=0.081133Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081133Jy sigma=0.000624 ! Fit after self-cal, rms=0.080381Jy sigma=0.000623 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.379 mas, bmaj=14.98 mas, bpa=-17.32 degrees ! Estimated noise=967.435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000485993 Jy ! Component: 100 - total flux cleaned = -0.000621068 Jy ! Component: 150 - total flux cleaned = -0.000639454 Jy ! Component: 200 - total flux cleaned = -0.000667528 Jy ! Total flux subtracted in 200 components = -0.000667528 Jy ! Clean residual min=-0.001714 max=0.001886 Jy/beam ! Clean residual mean=-0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0523535 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.0523535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080369Jy sigma=0.000623 ! Fit after self-cal, rms=0.080389Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032396 Jy ! Component: 100 - total flux cleaned = -0.000339205 Jy ! Component: 150 - total flux cleaned = -0.000392027 Jy ! Component: 200 - total flux cleaned = -0.000403613 Jy ! Total flux subtracted in 200 components = -0.000403613 Jy ! Clean residual min=-0.001796 max=0.001891 Jy/beam ! Clean residual mean=-0.000004 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0519498 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0519498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080384Jy sigma=0.000622 ! Fit after self-cal, rms=0.080382Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080382Jy sigma=0.000622 ! Fit after self-cal, rms=0.080933Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=14.99 mas, bpa=-17.3 degrees ! Estimated noise=968.917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161122 Jy ! Component: 100 - total flux cleaned = -0.000227496 Jy ! Component: 150 - total flux cleaned = -0.000228325 Jy ! Component: 200 - total flux cleaned = -0.000216765 Jy ! Total flux subtracted in 200 components = -0.000216765 Jy ! Clean residual min=-0.001729 max=0.001884 Jy/beam ! Clean residual mean=-0.000002 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0517331 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.0517331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080927Jy sigma=0.000622 ! Fit after self-cal, rms=0.080925Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165821 Jy ! Component: 100 - total flux cleaned = -0.000191843 Jy ! Component: 150 - total flux cleaned = -0.00019116 Jy ! Component: 200 - total flux cleaned = -0.000180395 Jy ! Total flux subtracted in 200 components = -0.000180395 Jy ! Clean residual min=-0.001817 max=0.001829 Jy/beam ! Clean residual mean=-0.000003 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0515527 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0515527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080920Jy sigma=0.000622 ! Fit after self-cal, rms=0.080913Jy sigma=0.000622 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080913Jy sigma=0.000622 ! Fit after self-cal, rms=0.081253Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.851 mas, bmaj=16.5 mas, bpa=-12.47 degrees ! Estimated noise=1181.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.2453e-05 Jy ! Component: 100 - total flux cleaned = 7.81756e-05 Jy ! Component: 150 - total flux cleaned = 5.72888e-05 Jy ! Component: 200 - total flux cleaned = 5.0021e-05 Jy ! Total flux subtracted in 200 components = 5.0021e-05 Jy ! Clean residual min=-0.001676 max=0.001738 Jy/beam ! Clean residual mean=-0.000004 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0516027 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.0516027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081250Jy sigma=0.000622 ! Fit after self-cal, rms=0.081267Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.10762e-05 Jy ! Component: 100 - total flux cleaned = 3.11158e-05 Jy ! Component: 150 - total flux cleaned = 3.10803e-05 Jy ! Component: 200 - total flux cleaned = 3.84271e-05 Jy ! Total flux subtracted in 200 components = 3.84271e-05 Jy ! Clean residual min=-0.001680 max=0.001721 Jy/beam ! Clean residual mean=-0.000004 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0516411 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.0516411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081268Jy sigma=0.000622 ! Fit after self-cal, rms=0.081269Jy sigma=0.000622 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=14.98 mas, bpa=-17.28 degrees ! Estimated noise=969.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.378 x 14.98 at -17.28 degrees (North through East) ! Clean map min=-0.0055045 max=0.053441 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=13.3 mas, bpa=-17.29 degrees ! Estimated noise=1589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405129 Jy ! Component: 100 - total flux cleaned = 0.0478787 Jy ! Component: 150 - total flux cleaned = 0.0489741 Jy ! Component: 200 - total flux cleaned = 0.0492334 Jy ! Total flux subtracted in 200 components = 0.0492334 Jy ! Clean residual min=-0.003540 max=0.003076 Jy/beam ! Clean residual mean=-0.000003 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.0492334 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0492334 Jy ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=14.98 mas, bpa=-17.28 degrees ! Estimated noise=969.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018828 Jy ! Component: 100 - total flux cleaned = 0.00213886 Jy ! Component: 150 - total flux cleaned = 0.00218391 Jy ! Component: 200 - total flux cleaned = 0.00222211 Jy ! Total flux subtracted in 200 components = 0.00222211 Jy ! Clean residual min=-0.001731 max=0.001787 Jy/beam ! Clean residual mean=-0.000003 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0514555 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.0514555 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.851 mas, bmaj=16.5 mas, bpa=-12.47 degrees ! Estimated noise=1181.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397287 Jy ! Component: 100 - total flux cleaned = 0.000350848 Jy ! Component: 150 - total flux cleaned = 0.000315221 Jy ! Component: 200 - total flux cleaned = 0.0002879 Jy ! Total flux subtracted in 200 components = 0.0002879 Jy ! Clean residual min=-0.001651 max=0.001740 Jy/beam ! Clean residual mean=-0.000004 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0517434 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.1261e-05 Jy ! Component: 100 - total flux cleaned = -2.9277e-05 Jy ! Component: 150 - total flux cleaned = -3.67278e-05 Jy ! Component: 200 - total flux cleaned = -4.28826e-05 Jy ! Total flux subtracted in 200 components = -4.28826e-05 Jy ! Clean residual min=-0.001676 max=0.001760 Jy/beam ! Clean residual mean=-0.000004 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0517005 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 64 components and 0.0517005 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=14.98 mas, bpa=-17.28 degrees ! Estimated noise=969.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165523 Jy ! Component: 100 - total flux cleaned = -0.000258663 Jy ! Component: 150 - total flux cleaned = -0.000257866 Jy ! Component: 200 - total flux cleaned = -0.000271911 Jy ! Total flux subtracted in 200 components = -0.000271911 Jy ! Clean residual min=-0.001699 max=0.001787 Jy/beam ! Clean residual mean=-0.000003 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0514286 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.0514286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081271Jy sigma=0.000622 ! Fit after self-cal, rms=0.081259Jy sigma=0.000622 wmodel J0953-0840_S_2017_10_09_pus_map.mod ! Writing 80 model components to file: J0953-0840_S_2017_10_09_pus_map.mod wobs J0953-0840_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0953-0840_S_2017_10_09_pus_uvs.fits wwins J0953-0840_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0953-0840_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551982 Jy ! Component: 100 - total flux cleaned = 0.000676394 Jy ! Component: 150 - total flux cleaned = 0.000792452 Jy ! Component: 200 - total flux cleaned = 0.000792949 Jy ! Component: 250 - total flux cleaned = 0.00082018 Jy ! Component: 300 - total flux cleaned = 0.000845701 Jy ! Component: 350 - total flux cleaned = 0.000942901 Jy ! Component: 400 - total flux cleaned = 0.000942625 Jy ! Component: 450 - total flux cleaned = 0.000965323 Jy ! Component: 500 - total flux cleaned = 0.000987042 Jy ! Component: 550 - total flux cleaned = 0.00102947 Jy ! Component: 600 - total flux cleaned = 0.00100899 Jy ! Component: 650 - total flux cleaned = 0.00104966 Jy ! Component: 700 - total flux cleaned = 0.00106952 Jy ! Component: 750 - total flux cleaned = 0.00108886 Jy ! Component: 800 - total flux cleaned = 0.00112669 Jy ! Component: 850 - total flux cleaned = 0.00118203 Jy ! Component: 900 - total flux cleaned = 0.00123587 Jy ! Component: 950 - total flux cleaned = 0.0012358 Jy ! Component: 1000 - total flux cleaned = 0.00125361 Jy ! Component: 1050 - total flux cleaned = 0.00132283 Jy ! Component: 1100 - total flux cleaned = 0.00140746 Jy ! Component: 1150 - total flux cleaned = 0.00142384 Jy ! Component: 1200 - total flux cleaned = 0.00150571 Jy ! Component: 1250 - total flux cleaned = 0.00161879 Jy ! Component: 1300 - total flux cleaned = 0.0016821 Jy ! Component: 1350 - total flux cleaned = 0.00176036 Jy ! Component: 1400 - total flux cleaned = 0.00185288 Jy ! Component: 1450 - total flux cleaned = 0.00189815 Jy ! Component: 1500 - total flux cleaned = 0.00191295 Jy ! Component: 1550 - total flux cleaned = 0.0019279 Jy ! Component: 1600 - total flux cleaned = 0.00200105 Jy ! Component: 1650 - total flux cleaned = 0.00201568 Jy ! Component: 1700 - total flux cleaned = 0.00205844 Jy ! Component: 1750 - total flux cleaned = 0.00208647 Jy ! Component: 1800 - total flux cleaned = 0.00211413 Jy ! Component: 1850 - total flux cleaned = 0.00214146 Jy ! Component: 1900 - total flux cleaned = 0.00220865 Jy ! Component: 1950 - total flux cleaned = 0.00224848 Jy ! Component: 2000 - total flux cleaned = 0.00230108 Jy ! Component: 2050 - total flux cleaned = 0.00235308 Jy ! Component: 2100 - total flux cleaned = 0.00239163 Jy ! Component: 2150 - total flux cleaned = 0.00237895 Jy ! Component: 2200 - total flux cleaned = 0.00241695 Jy ! Component: 2250 - total flux cleaned = 0.00246689 Jy ! Component: 2300 - total flux cleaned = 0.0025039 Jy ! Component: 2350 - total flux cleaned = 0.00254042 Jy ! Component: 2400 - total flux cleaned = 0.00256459 Jy ! Component: 2450 - total flux cleaned = 0.00261255 Jy ! Component: 2500 - total flux cleaned = 0.00264812 Jy ! Component: 2550 - total flux cleaned = 0.00268328 Jy ! Component: 2600 - total flux cleaned = 0.00269494 Jy ! Component: 2650 - total flux cleaned = 0.00270654 Jy ! Component: 2700 - total flux cleaned = 0.0027408 Jy ! Component: 2750 - total flux cleaned = 0.00276351 Jy ! Component: 2800 - total flux cleaned = 0.00279713 Jy ! Component: 2850 - total flux cleaned = 0.00281929 Jy ! Component: 2900 - total flux cleaned = 0.00286333 Jy ! Component: 2950 - total flux cleaned = 0.00290688 Jy ! Component: 3000 - total flux cleaned = 0.00296077 Jy ! Component: 3050 - total flux cleaned = 0.00299283 Jy ! Component: 3100 - total flux cleaned = 0.00304604 Jy ! Component: 3150 - total flux cleaned = 0.00307764 Jy ! Component: 3200 - total flux cleaned = 0.00315104 Jy ! Component: 3250 - total flux cleaned = 0.00318214 Jy ! Component: 3300 - total flux cleaned = 0.00326472 Jy ! Component: 3350 - total flux cleaned = 0.00329542 Jy ! Component: 3400 - total flux cleaned = 0.00335644 Jy ! Component: 3450 - total flux cleaned = 0.00338679 Jy ! Component: 3500 - total flux cleaned = 0.00342697 Jy ! Component: 3550 - total flux cleaned = 0.00346689 Jy ! Component: 3600 - total flux cleaned = 0.00351648 Jy ! Component: 3650 - total flux cleaned = 0.00356573 Jy ! Component: 3700 - total flux cleaned = 0.00358531 Jy ! Component: 3750 - total flux cleaned = 0.00362435 Jy ! Component: 3800 - total flux cleaned = 0.00366309 Jy ! Component: 3850 - total flux cleaned = 0.00367275 Jy ! Component: 3900 - total flux cleaned = 0.00371114 Jy ! Component: 3950 - total flux cleaned = 0.00374928 Jy ! Component: 4000 - total flux cleaned = 0.00376821 Jy ! Component: 4050 - total flux cleaned = 0.00380608 Jy ! Total flux subtracted in 4096 components = 0.00385306 Jy ! Clean residual min=-0.000526 max=0.000573 Jy/beam ! Clean residual mean=0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.0552817 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 338 components and 0.0552816 Jy ![Exited script file: muppet] wmap "J0953-0840_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.378 x 14.98 at -17.28 degrees (North through East) ! Clean map min=-0.005356 max=0.053627 Jy/beam ! Writing clean map to FITS file: J0953-0840_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0536274 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000168398 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.942046 0.942046 1.88409 3.76819 7.53637 15.0727 30.1455 60.291 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.378 x 14.98 at -17.28 degrees (North through East) ! Clean map min=-0.005356 max=0.053627 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0953-0840_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:09:26 2019