! Started logfile: J0950-2844_S_2017_07_09_pus_uvs.log on Wed May 8 14:46:42 2019 obs J0950-2844_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0950-2844_S_2017_07_09_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.717295 visibilities/baseline/integration-bin. ! Found source: J0950-2844 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 14848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0950-2844_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 238 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 281 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 281 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 841 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993972Jy sigma=0.006977 ! Fit after self-cal, rms=0.950817Jy sigma=0.006680 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=6.634 mas, bpa=-7.842 degrees ! Estimated noise=1596.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412412 Jy ! Component: 100 - total flux cleaned = 0.0504315 Jy ! Total flux subtracted in 100 components = 0.0504315 Jy ! Clean residual min=-0.004796 max=0.004243 Jy/beam ! Clean residual mean=0.000005 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.0504315 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0504315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093600Jy sigma=0.000620 ! Fit after self-cal, rms=0.092124Jy sigma=0.000610 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=8.538 mas, bpa=-2.477 degrees ! Estimated noise=1053.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475424 Jy ! Component: 100 - total flux cleaned = 0.00637232 Jy ! Component: 150 - total flux cleaned = 0.00702188 Jy ! Component: 200 - total flux cleaned = 0.0070955 Jy ! Total flux subtracted in 200 components = 0.0070955 Jy ! Clean residual min=-0.002684 max=0.002608 Jy/beam ! Clean residual mean=0.000002 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.057527 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.057527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091874Jy sigma=0.000608 ! Fit after self-cal, rms=0.091839Jy sigma=0.000608 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.98 HN 1.00* KP 0.99 ! LA 1.04 MK 1.05 NL 0.83 OV 1.09 ! PT 1.21 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 1.02 ! LA 1.06 MK 1.01 NL 0.90 OV 1.03 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.02 ! LA 0.97 MK 1.01 NL 0.94 OV 0.97 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.00* ! LA 0.76 MK 0.85 NL 1.00* OV 1.00* ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.091839Jy sigma=0.000608 ! Fit after self-cal, rms=0.089918Jy sigma=0.000607 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=8.446 mas, bpa=-2.767 degrees ! Estimated noise=1057.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216974 Jy ! Component: 100 - total flux cleaned = 0.000216991 Jy ! Component: 150 - total flux cleaned = 0.000202863 Jy ! Component: 200 - total flux cleaned = 0.000178297 Jy ! Total flux subtracted in 200 components = 0.000178297 Jy ! Clean residual min=-0.002352 max=0.002535 Jy/beam ! Clean residual mean=-0.000004 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0577052 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.0577053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089912Jy sigma=0.000607 ! Fit after self-cal, rms=0.089825Jy sigma=0.000607 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089825Jy sigma=0.000607 ! Fit after self-cal, rms=0.089712Jy sigma=0.000607 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=8.417 mas, bpa=-3.024 degrees ! Estimated noise=1056.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281312 Jy ! Component: 100 - total flux cleaned = 0.000256337 Jy ! Component: 150 - total flux cleaned = 0.000267255 Jy ! Component: 200 - total flux cleaned = 0.000267642 Jy ! Total flux subtracted in 200 components = 0.000267642 Jy ! Clean residual min=-0.002492 max=0.002476 Jy/beam ! Clean residual mean=-0.000005 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0579729 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.0579729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089707Jy sigma=0.000607 ! Fit after self-cal, rms=0.089678Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79765e-05 Jy ! Component: 100 - total flux cleaned = 2.80161e-05 Jy ! Component: 150 - total flux cleaned = 2.81605e-05 Jy ! Component: 200 - total flux cleaned = 2.77872e-05 Jy ! Total flux subtracted in 200 components = 2.77872e-05 Jy ! Clean residual min=-0.002530 max=0.002404 Jy/beam ! Clean residual mean=-0.000006 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0580007 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.0580007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089674Jy sigma=0.000606 ! Fit after self-cal, rms=0.089668Jy sigma=0.000606 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089668Jy sigma=0.000606 ! Fit after self-cal, rms=0.089800Jy sigma=0.000606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=8.374 mas, bpa=-3.1 degrees ! Estimated noise=1055.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.7518e-05 Jy ! Component: 100 - total flux cleaned = 0.000146315 Jy ! Component: 150 - total flux cleaned = 0.000145505 Jy ! Component: 200 - total flux cleaned = 0.000145752 Jy ! Total flux subtracted in 200 components = 0.000145752 Jy ! Clean residual min=-0.002239 max=0.002366 Jy/beam ! Clean residual mean=-0.000006 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0581464 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0581464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089794Jy sigma=0.000606 ! Fit after self-cal, rms=0.089808Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.83852e-05 Jy ! Component: 100 - total flux cleaned = 1.83652e-05 Jy ! Component: 150 - total flux cleaned = 3.11563e-05 Jy ! Component: 200 - total flux cleaned = 4.15987e-05 Jy ! Total flux subtracted in 200 components = 4.15987e-05 Jy ! Clean residual min=-0.002236 max=0.002372 Jy/beam ! Clean residual mean=-0.000006 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.058188 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.058188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089804Jy sigma=0.000606 ! Fit after self-cal, rms=0.089802Jy sigma=0.000606 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089802Jy sigma=0.000606 ! Fit after self-cal, rms=0.090047Jy sigma=0.000605 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.983 mas, bmaj=22.65 mas, bpa=-4.3 degrees ! Estimated noise=1360.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296844 Jy ! Component: 100 - total flux cleaned = 0.000311731 Jy ! Component: 150 - total flux cleaned = 0.000312459 Jy ! Component: 200 - total flux cleaned = 0.000324026 Jy ! Total flux subtracted in 200 components = 0.000324026 Jy ! Clean residual min=-0.002575 max=0.002299 Jy/beam ! Clean residual mean=-0.000011 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.0585121 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.0585121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090045Jy sigma=0.000605 ! Fit after self-cal, rms=0.090061Jy sigma=0.000605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.95362e-05 Jy ! Component: 100 - total flux cleaned = 3.54661e-05 Jy ! Component: 150 - total flux cleaned = 4.8191e-05 Jy ! Component: 200 - total flux cleaned = 5.86055e-05 Jy ! Total flux subtracted in 200 components = 5.86055e-05 Jy ! Clean residual min=-0.002419 max=0.002322 Jy/beam ! Clean residual mean=-0.000010 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.0585707 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.0585707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090061Jy sigma=0.000605 ! Fit after self-cal, rms=0.090054Jy sigma=0.000605 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.347 mas, bpa=-3.224 degrees ! Estimated noise=1054.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.165 x 8.347 at -3.224 degrees (North through East) ! Clean map min=-0.0021124 max=0.055335 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=6.6 mas, bpa=-8.631 degrees ! Estimated noise=1533.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042315 Jy ! Component: 100 - total flux cleaned = 0.0519855 Jy ! Component: 150 - total flux cleaned = 0.0557504 Jy ! Component: 200 - total flux cleaned = 0.0567863 Jy ! Total flux subtracted in 200 components = 0.0567863 Jy ! Clean residual min=-0.003457 max=0.003622 Jy/beam ! Clean residual mean=-0.000010 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.0567863 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0567863 Jy ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.347 mas, bpa=-3.224 degrees ! Estimated noise=1054.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129689 Jy ! Component: 100 - total flux cleaned = 0.00146649 Jy ! Component: 150 - total flux cleaned = 0.00156784 Jy ! Component: 200 - total flux cleaned = 0.00167825 Jy ! Total flux subtracted in 200 components = 0.00167825 Jy ! Clean residual min=-0.002301 max=0.002317 Jy/beam ! Clean residual mean=-0.000005 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0584645 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.0584645 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.983 mas, bmaj=22.65 mas, bpa=-4.3 degrees ! Estimated noise=1360.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290374 Jy ! Component: 100 - total flux cleaned = 0.000291468 Jy ! Component: 150 - total flux cleaned = 0.000292353 Jy ! Component: 200 - total flux cleaned = 0.000293441 Jy ! Total flux subtracted in 200 components = 0.000293441 Jy ! Clean residual min=-0.002379 max=0.002237 Jy/beam ! Clean residual mean=-0.000009 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.058758 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.33251e-05 Jy ! Component: 100 - total flux cleaned = 1.43451e-05 Jy ! Component: 150 - total flux cleaned = 1.48249e-05 Jy ! Component: 200 - total flux cleaned = 2.2383e-05 Jy ! Total flux subtracted in 200 components = 2.2383e-05 Jy ! Clean residual min=-0.002385 max=0.002266 Jy/beam ! Clean residual mean=-0.000009 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0587804 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.0587804 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.347 mas, bpa=-3.224 degrees ! Estimated noise=1054.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.58826e-05 Jy ! Component: 100 - total flux cleaned = -8.48386e-05 Jy ! Component: 150 - total flux cleaned = -7.01007e-05 Jy ! Component: 200 - total flux cleaned = -8.447e-05 Jy ! Total flux subtracted in 200 components = -8.447e-05 Jy ! Clean residual min=-0.002284 max=0.002369 Jy/beam ! Clean residual mean=-0.000005 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0586959 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0586959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090057Jy sigma=0.000605 ! Fit after self-cal, rms=0.090052Jy sigma=0.000605 wmodel J0950-2844_S_2017_07_09_pus_map.mod ! Writing 36 model components to file: J0950-2844_S_2017_07_09_pus_map.mod wobs J0950-2844_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0950-2844_S_2017_07_09_pus_uvs.fits wwins J0950-2844_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J0950-2844_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000611938 Jy ! Component: 100 - total flux cleaned = 0.000690424 Jy ! Component: 150 - total flux cleaned = 0.000691587 Jy ! Component: 200 - total flux cleaned = 0.000589954 Jy ! Component: 250 - total flux cleaned = 0.000591079 Jy ! Component: 300 - total flux cleaned = 0.000714615 Jy ! Component: 350 - total flux cleaned = 0.000773643 Jy ! Component: 400 - total flux cleaned = 0.000831427 Jy ! Component: 450 - total flux cleaned = 0.000831791 Jy ! Component: 500 - total flux cleaned = 0.000832052 Jy ! Component: 550 - total flux cleaned = 0.000883697 Jy ! Component: 600 - total flux cleaned = 0.000857816 Jy ! Component: 650 - total flux cleaned = 0.000957188 Jy ! Component: 700 - total flux cleaned = 0.00102935 Jy ! Component: 750 - total flux cleaned = 0.00117001 Jy ! Component: 800 - total flux cleaned = 0.00123854 Jy ! Component: 850 - total flux cleaned = 0.00121608 Jy ! Component: 900 - total flux cleaned = 0.00123813 Jy ! Component: 950 - total flux cleaned = 0.00125978 Jy ! Component: 1000 - total flux cleaned = 0.00132237 Jy ! Component: 1050 - total flux cleaned = 0.00128127 Jy ! Component: 1100 - total flux cleaned = 0.00140177 Jy ! Component: 1150 - total flux cleaned = 0.00136153 Jy ! Component: 1200 - total flux cleaned = 0.00140041 Jy ! Component: 1250 - total flux cleaned = 0.00134361 Jy ! Component: 1300 - total flux cleaned = 0.00138137 Jy ! Component: 1350 - total flux cleaned = 0.00132567 Jy ! Component: 1400 - total flux cleaned = 0.00134367 Jy ! Component: 1450 - total flux cleaned = 0.00132584 Jy ! Component: 1500 - total flux cleaned = 0.00127312 Jy ! Component: 1550 - total flux cleaned = 0.00125602 Jy ! Component: 1600 - total flux cleaned = 0.00122172 Jy ! Component: 1650 - total flux cleaned = 0.00115444 Jy ! Component: 1700 - total flux cleaned = 0.0011876 Jy ! Component: 1750 - total flux cleaned = 0.00110585 Jy ! Component: 1800 - total flux cleaned = 0.00115419 Jy ! Component: 1850 - total flux cleaned = 0.00117004 Jy ! Component: 1900 - total flux cleaned = 0.00110725 Jy ! Component: 1950 - total flux cleaned = 0.00118484 Jy ! Component: 2000 - total flux cleaned = 0.00121542 Jy ! Component: 2050 - total flux cleaned = 0.00116969 Jy ! Component: 2100 - total flux cleaned = 0.00122973 Jy ! Component: 2150 - total flux cleaned = 0.00119981 Jy ! Component: 2200 - total flux cleaned = 0.00122939 Jy ! Component: 2250 - total flux cleaned = 0.00128763 Jy ! Component: 2300 - total flux cleaned = 0.00125907 Jy ! Component: 2350 - total flux cleaned = 0.00127351 Jy ! Component: 2400 - total flux cleaned = 0.00135854 Jy ! Component: 2450 - total flux cleaned = 0.0013864 Jy ! Component: 2500 - total flux cleaned = 0.00145597 Jy ! Component: 2550 - total flux cleaned = 0.00151083 Jy ! Component: 2600 - total flux cleaned = 0.00157899 Jy ! Component: 2650 - total flux cleaned = 0.00159231 Jy ! Component: 2700 - total flux cleaned = 0.00161917 Jy ! Component: 2750 - total flux cleaned = 0.00168558 Jy ! Component: 2800 - total flux cleaned = 0.00168549 Jy ! Component: 2850 - total flux cleaned = 0.00172467 Jy ! Component: 2900 - total flux cleaned = 0.00176353 Jy ! Component: 2950 - total flux cleaned = 0.00175068 Jy ! Component: 3000 - total flux cleaned = 0.00173795 Jy ! Component: 3050 - total flux cleaned = 0.00173774 Jy ! Component: 3100 - total flux cleaned = 0.00167508 Jy ! Component: 3150 - total flux cleaned = 0.00168753 Jy ! Component: 3200 - total flux cleaned = 0.00166283 Jy ! Component: 3250 - total flux cleaned = 0.00163833 Jy ! Component: 3300 - total flux cleaned = 0.00165041 Jy ! Component: 3350 - total flux cleaned = 0.00158985 Jy ! Component: 3400 - total flux cleaned = 0.00161398 Jy ! Component: 3450 - total flux cleaned = 0.00160203 Jy ! Component: 3500 - total flux cleaned = 0.0015783 Jy ! Component: 3550 - total flux cleaned = 0.00153111 Jy ! Component: 3600 - total flux cleaned = 0.00156625 Jy ! Component: 3650 - total flux cleaned = 0.00150797 Jy ! Component: 3700 - total flux cleaned = 0.00148493 Jy ! Component: 3750 - total flux cleaned = 0.00146206 Jy ! Component: 3800 - total flux cleaned = 0.00141657 Jy ! Component: 3850 - total flux cleaned = 0.00140528 Jy ! Component: 3900 - total flux cleaned = 0.00138288 Jy ! Component: 3950 - total flux cleaned = 0.00134935 Jy ! Component: 4000 - total flux cleaned = 0.0013827 Jy ! Component: 4050 - total flux cleaned = 0.00138274 Jy ! Total flux subtracted in 4096 components = 0.00138269 Jy ! Clean residual min=-0.000645 max=0.000611 Jy/beam ! Clean residual mean=-0.000006 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0600786 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 299 components and 0.0600786 Jy ![Exited script file: muppet] wmap "J0950-2844_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.165 x 8.347 at -3.224 degrees (North through East) ! Clean map min=-0.00145 max=0.054273 Jy/beam ! Writing clean map to FITS file: J0950-2844_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0542733 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191749 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05991 1.05991 2.11981 4.23963 8.47926 16.9585 33.917 67.8341 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.165 x 8.347 at -3.224 degrees (North through East) ! Clean map min=-0.00145 max=0.054273 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0950-2844_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:46:46 2019