! Started logfile: J0950+0615_S_2017_06_15_pus_uvs.log on Tue May 7 15:16:28 2019 obs J0950+0615_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0950+0615_S_2017_06_15_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.952575 visibilities/baseline/integration-bin. ! Found source: J0950+0615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 14060 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0950+0615_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 475 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932817Jy sigma=0.008394 ! Fit after self-cal, rms=0.918208Jy sigma=0.008279 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=7.175 mas, bpa=-4.316 degrees ! Estimated noise=1086.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0658179 Jy ! Component: 100 - total flux cleaned = 0.0807964 Jy ! Total flux subtracted in 100 components = 0.0807964 Jy ! Clean residual min=-0.003694 max=0.005456 Jy/beam ! Clean residual mean=0.000003 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.0807964 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0807964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081221Jy sigma=0.000690 ! Fit after self-cal, rms=0.081203Jy sigma=0.000689 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.81 mas, bpa=-3.762 degrees ! Estimated noise=759.633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612938 Jy ! Component: 100 - total flux cleaned = 0.00920006 Jy ! Component: 150 - total flux cleaned = 0.0109757 Jy ! Component: 200 - total flux cleaned = 0.0120538 Jy ! Total flux subtracted in 200 components = 0.0120538 Jy ! Clean residual min=-0.002930 max=0.003804 Jy/beam ! Clean residual mean=0.000003 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.0928503 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 40 components and 0.0928503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080749Jy sigma=0.000685 ! Fit after self-cal, rms=0.080762Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.93 KP 0.99 ! LA 1.01 MK 1.12 NL 0.88 OV 1.05 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 0.96 HN 0.94 KP 1.00 ! LA 0.96 MK 1.17 NL 1.04 OV 1.01 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.96 KP 0.99 ! LA 0.95 MK 1.06 NL 1.00 OV 0.98 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.86 KP 1.00* ! LA 1.01 MK 0.95 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.080762Jy sigma=0.000685 ! Fit after self-cal, rms=0.082199Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=7.867 mas, bpa=-3.353 degrees ! Estimated noise=759.129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260317 Jy ! Component: 100 - total flux cleaned = -0.00026032 Jy ! Component: 150 - total flux cleaned = -0.000290994 Jy ! Component: 200 - total flux cleaned = -0.000343195 Jy ! Total flux subtracted in 200 components = -0.000343195 Jy ! Clean residual min=-0.002870 max=0.003575 Jy/beam ! Clean residual mean=0.000002 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.0925071 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.0925071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082173Jy sigma=0.000682 ! Fit after self-cal, rms=0.082239Jy sigma=0.000682 ! Inverting map ! Added new window around map position (18.5, -39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017014 Jy ! Component: 100 - total flux cleaned = 0.00103168 Jy ! Component: 150 - total flux cleaned = 0.000959136 Jy ! Component: 200 - total flux cleaned = 0.000957203 Jy ! Total flux subtracted in 200 components = 0.000957203 Jy ! Clean residual min=-0.002649 max=0.002784 Jy/beam ! Clean residual mean=0.000002 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0934643 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.0934643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082032Jy sigma=0.000681 ! Fit after self-cal, rms=0.082025Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082025Jy sigma=0.000681 ! Fit after self-cal, rms=0.088000Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=7.826 mas, bpa=-3.72 degrees ! Estimated noise=759.529 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.20734e-05 Jy ! Component: 100 - total flux cleaned = 0.000178455 Jy ! Component: 150 - total flux cleaned = 0.00020646 Jy ! Component: 200 - total flux cleaned = 0.000231785 Jy ! Total flux subtracted in 200 components = 0.000231785 Jy ! Clean residual min=-0.002110 max=0.002115 Jy/beam ! Clean residual mean=0.000001 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0936961 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.0936961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087976Jy sigma=0.000675 ! Fit after self-cal, rms=0.088085Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.61904e-05 Jy ! Component: 100 - total flux cleaned = 9.66321e-05 Jy ! Component: 150 - total flux cleaned = 9.61091e-05 Jy ! Component: 200 - total flux cleaned = 7.36849e-05 Jy ! Total flux subtracted in 200 components = 7.36849e-05 Jy ! Clean residual min=-0.002122 max=0.002129 Jy/beam ! Clean residual mean=0.000002 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0937698 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.0937698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088073Jy sigma=0.000674 ! Fit after self-cal, rms=0.088073Jy sigma=0.000674 ! Inverting map ! Added new window around map position (-43.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184058 Jy ! Component: 100 - total flux cleaned = 0.00252116 Jy ! Component: 150 - total flux cleaned = 0.00276162 Jy ! Component: 200 - total flux cleaned = 0.00289817 Jy ! Total flux subtracted in 200 components = 0.00289817 Jy ! Clean residual min=-0.001971 max=0.001790 Jy/beam ! Clean residual mean=0.000002 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0966679 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 109 components and 0.0966679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088026Jy sigma=0.000674 ! Fit after self-cal, rms=0.088023Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088023Jy sigma=0.000674 ! Fit after self-cal, rms=0.089502Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=7.817 mas, bpa=-3.651 degrees ! Estimated noise=757.435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494348 Jy ! Component: 100 - total flux cleaned = 0.000727075 Jy ! Component: 150 - total flux cleaned = 0.000777863 Jy ! Component: 200 - total flux cleaned = 0.000801813 Jy ! Total flux subtracted in 200 components = 0.000801813 Jy ! Clean residual min=-0.001877 max=0.001717 Jy/beam ! Clean residual mean=0.000003 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0974698 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 0.0974697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089482Jy sigma=0.000673 ! Fit after self-cal, rms=0.089495Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150233 Jy ! Component: 100 - total flux cleaned = 0.000172708 Jy ! Component: 150 - total flux cleaned = 0.000194314 Jy ! Component: 200 - total flux cleaned = 0.000215839 Jy ! Total flux subtracted in 200 components = 0.000215839 Jy ! Clean residual min=-0.001867 max=0.001689 Jy/beam ! Clean residual mean=0.000003 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0976856 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 123 components and 0.0976856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089483Jy sigma=0.000673 ! Fit after self-cal, rms=0.089483Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089483Jy sigma=0.000673 ! Fit after self-cal, rms=0.089744Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.521 mas, bmaj=11.95 mas, bpa=-5.361 degrees ! Estimated noise=935.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465376 Jy ! Component: 100 - total flux cleaned = 0.000524028 Jy ! Component: 150 - total flux cleaned = 0.000559213 Jy ! Component: 200 - total flux cleaned = 0.000575103 Jy ! Total flux subtracted in 200 components = 0.000575103 Jy ! Clean residual min=-0.002019 max=0.001984 Jy/beam ! Clean residual mean=0.000006 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0982607 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 137 components and 0.0982607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089739Jy sigma=0.000673 ! Fit after self-cal, rms=0.089743Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010228 Jy ! Component: 100 - total flux cleaned = 0.000117616 Jy ! Component: 150 - total flux cleaned = 0.000160547 Jy ! Component: 200 - total flux cleaned = 0.00018738 Jy ! Total flux subtracted in 200 components = 0.00018738 Jy ! Clean residual min=-0.002022 max=0.001950 Jy/beam ! Clean residual mean=0.000006 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0984481 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 146 components and 0.0984481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089742Jy sigma=0.000673 ! Fit after self-cal, rms=0.089742Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=7.814 mas, bpa=-3.613 degrees ! Estimated noise=756.449 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.31 x 7.814 at -3.613 degrees (North through East) ! Clean map min=-0.0017718 max=0.083771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=7.151 mas, bpa=-4.346 degrees ! Estimated noise=1079.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0651005 Jy ! Component: 100 - total flux cleaned = 0.0799652 Jy ! Component: 150 - total flux cleaned = 0.0857578 Jy ! Component: 200 - total flux cleaned = 0.0895174 Jy ! Total flux subtracted in 200 components = 0.0895174 Jy ! Clean residual min=-0.002494 max=0.002620 Jy/beam ! Clean residual mean=0.000002 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.0895174 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0895174 Jy ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=7.814 mas, bpa=-3.613 degrees ! Estimated noise=756.449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253468 Jy ! Component: 100 - total flux cleaned = 0.00439257 Jy ! Component: 150 - total flux cleaned = 0.00589 Jy ! Component: 200 - total flux cleaned = 0.0068886 Jy ! Total flux subtracted in 200 components = 0.0068886 Jy ! Clean residual min=-0.001976 max=0.001817 Jy/beam ! Clean residual mean=0.000003 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.096406 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 0.096406 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.521 mas, bmaj=11.95 mas, bpa=-5.361 degrees ! Estimated noise=935.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109394 Jy ! Component: 100 - total flux cleaned = 0.0014728 Jy ! Component: 150 - total flux cleaned = 0.00159576 Jy ! Component: 200 - total flux cleaned = 0.00170177 Jy ! Total flux subtracted in 200 components = 0.00170177 Jy ! Clean residual min=-0.002084 max=0.002072 Jy/beam ! Clean residual mean=0.000006 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0981077 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.37621e-05 Jy ! Component: 100 - total flux cleaned = 0.000115602 Jy ! Component: 150 - total flux cleaned = 0.000155385 Jy ! Component: 200 - total flux cleaned = 0.000136641 Jy ! Total flux subtracted in 200 components = 0.000136641 Jy ! Clean residual min=-0.002021 max=0.002002 Jy/beam ! Clean residual mean=0.000006 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0982444 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 68 components and 0.0982444 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=7.814 mas, bpa=-3.613 degrees ! Estimated noise=756.449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000436781 Jy ! Component: 100 - total flux cleaned = -0.000557693 Jy ! Component: 150 - total flux cleaned = -0.000522085 Jy ! Component: 200 - total flux cleaned = -0.00052072 Jy ! Total flux subtracted in 200 components = -0.00052072 Jy ! Clean residual min=-0.001906 max=0.001791 Jy/beam ! Clean residual mean=0.000003 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0977236 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 90 components and 0.0977236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089797Jy sigma=0.000674 ! Fit after self-cal, rms=0.089788Jy sigma=0.000674 wmodel J0950+0615_S_2017_06_15_pus_map.mod ! Writing 90 model components to file: J0950+0615_S_2017_06_15_pus_map.mod wobs J0950+0615_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0950+0615_S_2017_06_15_pus_uvs.fits wwins J0950+0615_S_2017_06_15_pus_map.win ! wwins: Wrote 3 windows to J0950+0615_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139564 Jy ! Component: 100 - total flux cleaned = -0.000294822 Jy ! Component: 150 - total flux cleaned = -0.000383408 Jy ! Component: 200 - total flux cleaned = -0.00038258 Jy ! Component: 250 - total flux cleaned = -0.000354548 Jy ! Component: 300 - total flux cleaned = -0.000246638 Jy ! Component: 350 - total flux cleaned = -0.000220577 Jy ! Component: 400 - total flux cleaned = -0.000142442 Jy ! Component: 450 - total flux cleaned = 1.00249e-05 Jy ! Component: 500 - total flux cleaned = 8.45298e-05 Jy ! Component: 550 - total flux cleaned = 0.000182586 Jy ! Component: 600 - total flux cleaned = 0.000230247 Jy ! Component: 650 - total flux cleaned = 0.000277063 Jy ! Component: 700 - total flux cleaned = 0.00030036 Jy ! Component: 750 - total flux cleaned = 0.000324232 Jy ! Component: 800 - total flux cleaned = 0.000369903 Jy ! Component: 850 - total flux cleaned = 0.000459486 Jy ! Component: 900 - total flux cleaned = 0.000503394 Jy ! Component: 950 - total flux cleaned = 0.00050313 Jy ! Component: 1000 - total flux cleaned = 0.000481937 Jy ! Component: 1050 - total flux cleaned = 0.000567125 Jy ! Component: 1100 - total flux cleaned = 0.000630089 Jy ! Component: 1150 - total flux cleaned = 0.000609453 Jy ! Component: 1200 - total flux cleaned = 0.000670947 Jy ! Component: 1250 - total flux cleaned = 0.000711667 Jy ! Component: 1300 - total flux cleaned = 0.00079201 Jy ! Component: 1350 - total flux cleaned = 0.000732361 Jy ! Component: 1400 - total flux cleaned = 0.000850441 Jy ! Component: 1450 - total flux cleaned = 0.000831073 Jy ! Component: 1500 - total flux cleaned = 0.000830928 Jy ! Component: 1550 - total flux cleaned = 0.000849919 Jy ! Component: 1600 - total flux cleaned = 0.000793237 Jy ! Component: 1650 - total flux cleaned = 0.000774868 Jy ! Component: 1700 - total flux cleaned = 0.000812035 Jy ! Component: 1750 - total flux cleaned = 0.000756937 Jy ! Component: 1800 - total flux cleaned = 0.000793501 Jy ! Component: 1850 - total flux cleaned = 0.00081157 Jy ! Component: 1900 - total flux cleaned = 0.000739979 Jy ! Component: 1950 - total flux cleaned = 0.000775607 Jy ! Component: 2000 - total flux cleaned = 0.000722593 Jy ! Component: 2050 - total flux cleaned = 0.000722729 Jy ! Component: 2100 - total flux cleaned = 0.000739849 Jy ! Component: 2150 - total flux cleaned = 0.000653601 Jy ! Component: 2200 - total flux cleaned = 0.000602344 Jy ! Component: 2250 - total flux cleaned = 0.000619214 Jy ! Component: 2300 - total flux cleaned = 0.000568555 Jy ! Component: 2350 - total flux cleaned = 0.000602043 Jy ! Component: 2400 - total flux cleaned = 0.000552162 Jy ! Component: 2450 - total flux cleaned = 0.000486251 Jy ! Component: 2500 - total flux cleaned = 0.000453676 Jy ! Component: 2550 - total flux cleaned = 0.000421144 Jy ! Component: 2600 - total flux cleaned = 0.000469655 Jy ! Component: 2650 - total flux cleaned = 0.000389359 Jy ! Component: 2700 - total flux cleaned = 0.000389421 Jy ! Component: 2750 - total flux cleaned = 0.000389385 Jy ! Component: 2800 - total flux cleaned = 0.000357813 Jy ! Component: 2850 - total flux cleaned = 0.000357769 Jy ! Component: 2900 - total flux cleaned = 0.000326684 Jy ! Component: 2950 - total flux cleaned = 0.000311296 Jy ! Component: 3000 - total flux cleaned = 0.000372753 Jy ! Component: 3050 - total flux cleaned = 0.000357527 Jy ! Component: 3100 - total flux cleaned = 0.000342397 Jy ! Component: 3150 - total flux cleaned = 0.000357502 Jy ! Component: 3200 - total flux cleaned = 0.000372403 Jy ! Component: 3250 - total flux cleaned = 0.000357442 Jy ! Component: 3300 - total flux cleaned = 0.000327905 Jy ! Component: 3350 - total flux cleaned = 0.000357396 Jy ! Component: 3400 - total flux cleaned = 0.000401509 Jy ! Component: 3450 - total flux cleaned = 0.00043052 Jy ! Component: 3500 - total flux cleaned = 0.000445057 Jy ! Component: 3550 - total flux cleaned = 0.00043076 Jy ! Component: 3600 - total flux cleaned = 0.000473847 Jy ! Component: 3650 - total flux cleaned = 0.00048806 Jy ! Component: 3700 - total flux cleaned = 0.000502227 Jy ! Component: 3750 - total flux cleaned = 0.000530508 Jy ! Component: 3800 - total flux cleaned = 0.000474338 Jy ! Component: 3850 - total flux cleaned = 0.000502354 Jy ! Component: 3900 - total flux cleaned = 0.000530103 Jy ! Component: 3950 - total flux cleaned = 0.000585348 Jy ! Component: 4000 - total flux cleaned = 0.000612787 Jy ! Component: 4050 - total flux cleaned = 0.000667507 Jy ! Total flux subtracted in 4096 components = 0.000599378 Jy ! Clean residual min=-0.000847 max=0.000893 Jy/beam ! Clean residual mean=0.000003 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.098323 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 363 components and 0.0983231 Jy ![Exited script file: muppet] wmap "J0950+0615_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.31 x 7.814 at -3.613 degrees (North through East) ! Clean map min=-0.0016716 max=0.083401 Jy/beam ! Writing clean map to FITS file: J0950+0615_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0834008 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246723 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.887483 0.887483 1.77497 3.54993 7.09987 14.1997 28.3995 56.7989 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.31 x 7.814 at -3.613 degrees (North through East) ! Clean map min=-0.0016716 max=0.083401 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0950+0615_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:16:33 2019