! Started logfile: J0949+1752_S_2017_09_26_pus_uvs.log on Sat May 11 12:59:34 2019 obs J0949+1752_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0949+1752_S_2017_09_26_pus_uva.fits ! AN table 1: 175 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.766508 visibilities/baseline/integration-bin. ! Found source: J0949+1752 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 19316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0949+1752_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 845 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.892223Jy sigma=0.008346 ! Fit after self-cal, rms=0.865049Jy sigma=0.008101 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=11.58 mas, bpa=-20.32 degrees ! Estimated noise=899.462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106562 Jy ! Component: 100 - total flux cleaned = 0.130573 Jy ! Total flux subtracted in 100 components = 0.130573 Jy ! Clean residual min=-0.005127 max=0.008559 Jy/beam ! Clean residual mean=-0.000009 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.130573 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.130573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079101Jy sigma=0.000690 ! Fit after self-cal, rms=0.079034Jy sigma=0.000690 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=11.47 mas, bpa=-18.08 degrees ! Estimated noise=609.797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121987 Jy ! Component: 100 - total flux cleaned = 0.0187806 Jy ! Component: 150 - total flux cleaned = 0.0230127 Jy ! Component: 200 - total flux cleaned = 0.0258296 Jy ! Total flux subtracted in 200 components = 0.0258296 Jy ! Clean residual min=-0.003598 max=0.003826 Jy/beam ! Clean residual mean=0.000003 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.156403 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 47 components and 0.156403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077244Jy sigma=0.000670 ! Fit after self-cal, rms=0.077209Jy sigma=0.000669 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.96 KP 1.05 ! LA 0.99 MK 1.03 NL 0.90 OV 1.03 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.00* HN 0.98 KP 1.00 ! LA 0.98 MK 1.02 NL 1.02 OV 1.07 ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.99 KP 0.98 ! LA 0.97 MK 1.07 NL 1.00 OV 0.95 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 186 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.95 KP 1.00* ! LA 0.92 MK 1.13 NL 1.00* OV 1.30 ! PT 0.98 ! ! ! Fit before self-cal, rms=0.077209Jy sigma=0.000669 ! Fit after self-cal, rms=0.079247Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=11.59 mas, bpa=-17.92 degrees ! Estimated noise=611.416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00134751 Jy ! Component: 100 - total flux cleaned = -0.00124154 Jy ! Component: 150 - total flux cleaned = -0.00118064 Jy ! Component: 200 - total flux cleaned = -0.00118118 Jy ! Total flux subtracted in 200 components = -0.00118118 Jy ! Clean residual min=-0.002905 max=0.002611 Jy/beam ! Clean residual mean=-0.000003 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.155222 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.155222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079201Jy sigma=0.000661 ! Fit after self-cal, rms=0.079384Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079384Jy sigma=0.000661 ! Fit after self-cal, rms=0.083899Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=11.61 mas, bpa=-17.76 degrees ! Estimated noise=611.329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360413 Jy ! Component: 100 - total flux cleaned = 4.54876e-05 Jy ! Component: 150 - total flux cleaned = -0.000197157 Jy ! Component: 200 - total flux cleaned = -0.000295519 Jy ! Total flux subtracted in 200 components = -0.000295519 Jy ! Clean residual min=-0.001803 max=0.002047 Jy/beam ! Clean residual mean=-0.000001 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.154926 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.154926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083882Jy sigma=0.000657 ! Fit after self-cal, rms=0.084104Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187984 Jy ! Component: 100 - total flux cleaned = 0.00284712 Jy ! Component: 150 - total flux cleaned = 0.00321603 Jy ! Component: 200 - total flux cleaned = 0.00321475 Jy ! Total flux subtracted in 200 components = 0.00321475 Jy ! Clean residual min=-0.001633 max=0.001412 Jy/beam ! Clean residual mean=-0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.158141 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 113 components and 0.158141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084048Jy sigma=0.000656 ! Fit after self-cal, rms=0.084028Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084028Jy sigma=0.000656 ! Fit after self-cal, rms=0.084468Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=11.61 mas, bpa=-17.81 degrees ! Estimated noise=610.701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202735 Jy ! Component: 100 - total flux cleaned = 0.000312494 Jy ! Component: 150 - total flux cleaned = 0.000314583 Jy ! Component: 200 - total flux cleaned = 0.000314613 Jy ! Total flux subtracted in 200 components = 0.000314613 Jy ! Clean residual min=-0.001645 max=0.001408 Jy/beam ! Clean residual mean=-0.000002 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.158456 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 136 components and 0.158456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084455Jy sigma=0.000656 ! Fit after self-cal, rms=0.084481Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.80385e-05 Jy ! Component: 100 - total flux cleaned = 1.17924e-05 Jy ! Component: 150 - total flux cleaned = -2.07651e-05 Jy ! Component: 200 - total flux cleaned = 9.40391e-06 Jy ! Total flux subtracted in 200 components = 9.40391e-06 Jy ! Clean residual min=-0.001616 max=0.001370 Jy/beam ! Clean residual mean=-0.000002 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.158465 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 147 components and 0.158465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084475Jy sigma=0.000656 ! Fit after self-cal, rms=0.084474Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084474Jy sigma=0.000656 ! Fit after self-cal, rms=0.084463Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.064 mas, bmaj=12.64 mas, bpa=-14.74 degrees ! Estimated noise=716.048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.22945e-05 Jy ! Component: 100 - total flux cleaned = -0.000159043 Jy ! Component: 150 - total flux cleaned = -0.00021751 Jy ! Component: 200 - total flux cleaned = -0.000270108 Jy ! Total flux subtracted in 200 components = -0.000270108 Jy ! Clean residual min=-0.001617 max=0.001724 Jy/beam ! Clean residual mean=-0.000003 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.158195 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 167 components and 0.158195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084463Jy sigma=0.000656 ! Fit after self-cal, rms=0.084469Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.38289e-07 Jy ! Component: 100 - total flux cleaned = -1.79031e-05 Jy ! Component: 150 - total flux cleaned = -5.99569e-05 Jy ! Component: 200 - total flux cleaned = -0.000105245 Jy ! Total flux subtracted in 200 components = -0.000105245 Jy ! Clean residual min=-0.001574 max=0.001678 Jy/beam ! Clean residual mean=-0.000003 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.15809 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 183 components and 0.15809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084470Jy sigma=0.000656 ! Fit after self-cal, rms=0.084470Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=11.62 mas, bpa=-17.84 degrees ! Estimated noise=610.178 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.63 x 11.62 at -17.84 degrees (North through East) ! Clean map min=-0.0015162 max=0.13735 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=11.68 mas, bpa=-20.11 degrees ! Estimated noise=910.165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106663 Jy ! Component: 100 - total flux cleaned = 0.130626 Jy ! Component: 150 - total flux cleaned = 0.139292 Jy ! Component: 200 - total flux cleaned = 0.14418 Jy ! Total flux subtracted in 200 components = 0.14418 Jy ! Clean residual min=-0.002703 max=0.002681 Jy/beam ! Clean residual mean=-0.000005 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.14418 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.14418 Jy ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=11.62 mas, bpa=-17.84 degrees ! Estimated noise=610.178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458795 Jy ! Component: 100 - total flux cleaned = 0.00747174 Jy ! Component: 150 - total flux cleaned = 0.009532 Jy ! Component: 200 - total flux cleaned = 0.0110564 Jy ! Total flux subtracted in 200 components = 0.0110564 Jy ! Clean residual min=-0.001895 max=0.001444 Jy/beam ! Clean residual mean=-0.000002 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.155237 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 78 components and 0.155237 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.064 mas, bmaj=12.64 mas, bpa=-14.74 degrees ! Estimated noise=716.048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151373 Jy ! Component: 100 - total flux cleaned = 0.00221075 Jy ! Component: 150 - total flux cleaned = 0.00243184 Jy ! Component: 200 - total flux cleaned = 0.00254683 Jy ! Total flux subtracted in 200 components = 0.00254683 Jy ! Clean residual min=-0.001761 max=0.001670 Jy/beam ! Clean residual mean=-0.000003 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.157783 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.76535e-05 Jy ! Component: 100 - total flux cleaned = 0.000149455 Jy ! Component: 150 - total flux cleaned = 0.000196143 Jy ! Component: 200 - total flux cleaned = 0.000224877 Jy ! Total flux subtracted in 200 components = 0.000224877 Jy ! Clean residual min=-0.001623 max=0.001645 Jy/beam ! Clean residual mean=-0.000003 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.158008 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 149 components and 0.158008 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=11.62 mas, bpa=-17.84 degrees ! Estimated noise=610.178 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378645 Jy ! Component: 100 - total flux cleaned = 0.000445315 Jy ! Component: 150 - total flux cleaned = 0.000426522 Jy ! Component: 200 - total flux cleaned = 0.000426595 Jy ! Total flux subtracted in 200 components = 0.000426595 Jy ! Clean residual min=-0.001539 max=0.001367 Jy/beam ! Clean residual mean=-0.000002 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.158435 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 173 components and 0.158435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084473Jy sigma=0.000656 ! Fit after self-cal, rms=0.084473Jy sigma=0.000656 wmodel J0949+1752_S_2017_09_26_pus_map.mod ! Writing 173 model components to file: J0949+1752_S_2017_09_26_pus_map.mod wobs J0949+1752_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0949+1752_S_2017_09_26_pus_uvs.fits wwins J0949+1752_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J0949+1752_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015074 Jy ! Component: 100 - total flux cleaned = -2.17857e-05 Jy ! Component: 150 - total flux cleaned = 0.000118158 Jy ! Component: 200 - total flux cleaned = 0.000289409 Jy ! Component: 250 - total flux cleaned = 0.000453682 Jy ! Component: 300 - total flux cleaned = 0.00062795 Jy ! Component: 350 - total flux cleaned = 0.000761991 Jy ! Component: 400 - total flux cleaned = 0.00089126 Jy ! Component: 450 - total flux cleaned = 0.000890935 Jy ! Component: 500 - total flux cleaned = 0.000921571 Jy ! Component: 550 - total flux cleaned = 0.000980875 Jy ! Component: 600 - total flux cleaned = 0.000980508 Jy ! Component: 650 - total flux cleaned = 0.00102218 Jy ! Component: 700 - total flux cleaned = 0.00103605 Jy ! Component: 750 - total flux cleaned = 0.00108981 Jy ! Component: 800 - total flux cleaned = 0.00112946 Jy ! Component: 850 - total flux cleaned = 0.00118106 Jy ! Component: 900 - total flux cleaned = 0.00124407 Jy ! Component: 950 - total flux cleaned = 0.00130546 Jy ! Component: 1000 - total flux cleaned = 0.00134188 Jy ! Component: 1050 - total flux cleaned = 0.00140153 Jy ! Component: 1100 - total flux cleaned = 0.00148363 Jy ! Component: 1150 - total flux cleaned = 0.00148353 Jy ! Component: 1200 - total flux cleaned = 0.00152929 Jy ! Component: 1250 - total flux cleaned = 0.0015852 Jy ! Component: 1300 - total flux cleaned = 0.00159608 Jy ! Component: 1350 - total flux cleaned = 0.00165051 Jy ! Component: 1400 - total flux cleaned = 0.00167169 Jy ! Component: 1450 - total flux cleaned = 0.00170345 Jy ! Component: 1500 - total flux cleaned = 0.00169304 Jy ! Component: 1550 - total flux cleaned = 0.00173411 Jy ! Component: 1600 - total flux cleaned = 0.00173395 Jy ! Component: 1650 - total flux cleaned = 0.00174382 Jy ! Component: 1700 - total flux cleaned = 0.0017141 Jy ! Component: 1750 - total flux cleaned = 0.00171416 Jy ! Component: 1800 - total flux cleaned = 0.00171425 Jy ! Component: 1850 - total flux cleaned = 0.0016856 Jy ! Component: 1900 - total flux cleaned = 0.00169514 Jy ! Component: 1950 - total flux cleaned = 0.00166695 Jy ! Component: 2000 - total flux cleaned = 0.00164842 Jy ! Component: 2050 - total flux cleaned = 0.0016301 Jy ! Component: 2100 - total flux cleaned = 0.00160298 Jy ! Component: 2150 - total flux cleaned = 0.00156721 Jy ! Component: 2200 - total flux cleaned = 0.00153178 Jy ! Component: 2250 - total flux cleaned = 0.00147033 Jy ! Component: 2300 - total flux cleaned = 0.00143561 Jy ! Component: 2350 - total flux cleaned = 0.00139261 Jy ! Component: 2400 - total flux cleaned = 0.00135853 Jy ! Component: 2450 - total flux cleaned = 0.00132479 Jy ! Component: 2500 - total flux cleaned = 0.00127449 Jy ! Component: 2550 - total flux cleaned = 0.00123288 Jy ! Component: 2600 - total flux cleaned = 0.00119156 Jy ! Component: 2650 - total flux cleaned = 0.00113425 Jy ! Component: 2700 - total flux cleaned = 0.00109358 Jy ! Component: 2750 - total flux cleaned = 0.00107752 Jy ! Component: 2800 - total flux cleaned = 0.00102952 Jy ! Component: 2850 - total flux cleaned = 0.00100563 Jy ! Component: 2900 - total flux cleaned = 0.000950543 Jy ! Component: 2950 - total flux cleaned = 0.000911538 Jy ! Component: 3000 - total flux cleaned = 0.000911573 Jy ! Component: 3050 - total flux cleaned = 0.000873023 Jy ! Component: 3100 - total flux cleaned = 0.000850039 Jy ! Component: 3150 - total flux cleaned = 0.000827226 Jy ! Component: 3200 - total flux cleaned = 0.000804516 Jy ! Component: 3250 - total flux cleaned = 0.000789579 Jy ! Component: 3300 - total flux cleaned = 0.000759748 Jy ! Component: 3350 - total flux cleaned = 0.000730072 Jy ! Component: 3400 - total flux cleaned = 0.000715319 Jy ! Component: 3450 - total flux cleaned = 0.00072265 Jy ! Component: 3500 - total flux cleaned = 0.000693491 Jy ! Component: 3550 - total flux cleaned = 0.000678939 Jy ! Component: 3600 - total flux cleaned = 0.000635759 Jy ! Component: 3650 - total flux cleaned = 0.000592808 Jy ! Component: 3700 - total flux cleaned = 0.000578613 Jy ! Component: 3750 - total flux cleaned = 0.000557455 Jy ! Component: 3800 - total flux cleaned = 0.000557397 Jy ! Component: 3850 - total flux cleaned = 0.000522335 Jy ! Component: 3900 - total flux cleaned = 0.000466609 Jy ! Component: 3950 - total flux cleaned = 0.000473623 Jy ! Component: 4000 - total flux cleaned = 0.000473667 Jy ! Component: 4050 - total flux cleaned = 0.000453064 Jy ! Total flux subtracted in 4096 components = 0.000473562 Jy ! Clean residual min=-0.000397 max=0.000460 Jy/beam ! Clean residual mean=-0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.158908 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 468 components and 0.158908 Jy ![Exited script file: muppet] wmap "J0949+1752_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.63 x 11.62 at -17.84 degrees (North through East) ! Clean map min=-0.0010324 max=0.13761 Jy/beam ! Writing clean map to FITS file: J0949+1752_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13761 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000125158 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.272853 0.272853 0.545705 1.09141 2.18282 4.36564 8.73129 17.4626 34.9252 69.8503 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.63 x 11.62 at -17.84 degrees (North through East) ! Clean map min=-0.0010324 max=0.13761 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0949+1752_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:59:39 2019