! Started logfile: J0947+5907_X_2017_05_31_pus_uvs.log on Tue Feb  5 10:47:32 2019
obs J0947+5907_X_2017_05_31_pus_uva.fits
! Reading UV FITS file: J0947+5907_X_2017_05_31_pus_uva.fits
! AN table 1: 113 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.902852 visibilities/baseline/integration-bin.
! Found source: J0947+5907
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1698 lines of history.
! 
! Reading 55092 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0947+5907_X_2017_05_31_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.925145Jy  sigma=0.007644
! Fit after  self-cal, rms=0.906668Jy  sigma=0.007507
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8191 mas, bmaj=0.9793 mas, bpa=34.95 degrees
! Estimated noise=931.538 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0655342 Jy
! Component: 100  -  total flux cleaned = 0.0914452 Jy
! Total flux subtracted in 100 components = 0.0914452 Jy
! Clean residual min=-0.005400 max=0.014986 Jy/beam
! Clean residual mean=-0.000007 rms=0.001764 Jy/beam
! Combined flux in latest and established models = 0.0914453 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0914453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094730Jy  sigma=0.000769
! Fit after  self-cal, rms=0.094573Jy  sigma=0.000768
! Inverting map 
! Added new window around map position (-0.6, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178445 Jy
! Component: 100  -  total flux cleaned = 0.029788 Jy
! Total flux subtracted in 100 components = 0.029788 Jy
! Clean residual min=-0.004478 max=0.007449 Jy/beam
! Clean residual mean=0.000001 rms=0.001184 Jy/beam
! Combined flux in latest and established models = 0.121233 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.121233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089133Jy  sigma=0.000718
! Fit after  self-cal, rms=0.088921Jy  sigma=0.000716
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00955195 Jy
! Component: 100  -  total flux cleaned = 0.0161192 Jy
! Total flux subtracted in 100 components = 0.0161192 Jy
! Clean residual min=-0.003885 max=0.005261 Jy/beam
! Clean residual mean=0.000005 rms=0.000949 Jy/beam
! Combined flux in latest and established models = 0.137352 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 27 components and 0.137352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087239Jy  sigma=0.000701
! Fit after  self-cal, rms=0.087167Jy  sigma=0.000700
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=1.272 mas, bpa=38.63 degrees
! Estimated noise=379.904 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00880526 Jy
! Component: 100  -  total flux cleaned = 0.0138022 Jy
! Component: 150  -  total flux cleaned = 0.0169232 Jy
! Component: 200  -  total flux cleaned = 0.0189502 Jy
! Total flux subtracted in 200 components = 0.0189502 Jy
! Clean residual min=-0.002615 max=0.003261 Jy/beam
! Clean residual mean=0.000018 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.156303 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 35 components and 0.156303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086296Jy  sigma=0.000692
! Fit after  self-cal, rms=0.086264Jy  sigma=0.000692
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.99     KP        0.99     
!   LA        0.94     MK        0.94     NL        0.98     OV        1.07     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.07     KP        0.95     
!   LA        0.95     MK        0.93     NL        0.97     OV        1.08     
!   PT        1.08     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.03     KP        0.88     
!   LA        0.96     MK        1.01     NL        0.97     OV        1.07     
!   PT        1.03     SC        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     HN        1.05     KP        0.98     
!   LA        0.97     MK        1.00     NL        0.94     OV        1.08     
!   PT        1.05     SC        1.12     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        0.99     KP        0.98     
!   LA        0.97     MK        0.99     NL        0.88     OV        1.07     
!   PT        1.03     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.08     KP        0.97     
!   LA        0.96     MK        0.96     NL        0.87     OV        1.00     
!   PT        1.01     SC        1.15     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.08     KP        0.95     
!   LA        0.95     MK        0.98     NL        0.87     OV        1.04     
!   PT        1.05     SC        1.09     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.05     KP        0.96     
!   LA        0.95     MK        0.98     NL        0.92     OV        1.02     
!   PT        1.05     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.19     KP        0.98     
!   LA        0.97     MK        0.95     NL        0.93     OV        1.01     
!   PT        1.05     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.23     KP        0.97     
!   LA        1.08     MK        0.91     NL        0.93     OV        1.03     
!   PT        1.06     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.00     KP        0.89     
!   LA        1.01     MK        0.96     NL        0.88     OV        1.03     
!   PT        1.06     SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.35     KP        0.91     
!   LA        0.99     MK        0.98     NL        0.93     OV        1.15     
!   PT        1.05     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.086264Jy  sigma=0.000692
! Fit after  self-cal, rms=0.086401Jy  sigma=0.000688
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=1.273 mas, bpa=38.12 degrees
! Estimated noise=378.228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363002 Jy
! Component: 100  -  total flux cleaned = 0.000364469 Jy
! Component: 150  -  total flux cleaned = 0.000429788 Jy
! Component: 200  -  total flux cleaned = 0.00048704 Jy
! Total flux subtracted in 200 components = 0.00048704 Jy
! Clean residual min=-0.001799 max=0.002758 Jy/beam
! Clean residual mean=0.000011 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.15679 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.15679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086369Jy  sigma=0.000688
! Fit after  self-cal, rms=0.086429Jy  sigma=0.000688
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086429Jy  sigma=0.000688
! Fit after  self-cal, rms=0.087806Jy  sigma=0.000685
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=1.266 mas, bpa=37.67 degrees
! Estimated noise=375.952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00085377 Jy
! Component: 100  -  total flux cleaned = 0.000999218 Jy
! Component: 150  -  total flux cleaned = 0.00104608 Jy
! Component: 200  -  total flux cleaned = 0.00106679 Jy
! Total flux subtracted in 200 components = 0.00106679 Jy
! Clean residual min=-0.001688 max=0.002518 Jy/beam
! Clean residual mean=0.000015 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.157857 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.157856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087786Jy  sigma=0.000685
! Fit after  self-cal, rms=0.087851Jy  sigma=0.000685
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105911 Jy
! Component: 100  -  total flux cleaned = 0.000621694 Jy
! Component: 150  -  total flux cleaned = 0.000360687 Jy
! Component: 200  -  total flux cleaned = 6.08403e-05 Jy
! Total flux subtracted in 200 components = 6.08403e-05 Jy
! Clean residual min=-0.001479 max=0.002139 Jy/beam
! Clean residual mean=0.000015 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.157917 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 63 components and 0.157917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087775Jy  sigma=0.000685
! Fit after  self-cal, rms=0.087767Jy  sigma=0.000684
! Inverting map 
! Added new window around map position (11.8, 15.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180631 Jy
! Component: 100  -  total flux cleaned = 0.00226009 Jy
! Component: 150  -  total flux cleaned = 0.00222824 Jy
! Component: 200  -  total flux cleaned = 0.00219575 Jy
! Total flux subtracted in 200 components = 0.00219575 Jy
! Clean residual min=-0.001406 max=0.001836 Jy/beam
! Clean residual mean=0.000011 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.160113 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 77 components and 0.160113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087726Jy  sigma=0.000684
! Fit after  self-cal, rms=0.087725Jy  sigma=0.000684
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087725Jy  sigma=0.000684
! Fit after  self-cal, rms=0.088049Jy  sigma=0.000684
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=1.273 mas, bpa=37.84 degrees
! Estimated noise=376.008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112219 Jy
! Component: 100  -  total flux cleaned = 0.00115688 Jy
! Component: 150  -  total flux cleaned = 0.00107092 Jy
! Component: 200  -  total flux cleaned = 0.00107095 Jy
! Total flux subtracted in 200 components = 0.00107095 Jy
! Clean residual min=-0.001280 max=0.001834 Jy/beam
! Clean residual mean=0.000014 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.161184 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 80 components and 0.161184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088025Jy  sigma=0.000684
! Fit after  self-cal, rms=0.088045Jy  sigma=0.000684
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238388 Jy
! Component: 100  -  total flux cleaned = 0.000190991 Jy
! Component: 150  -  total flux cleaned = 0.000169599 Jy
! Component: 200  -  total flux cleaned = 0.000168959 Jy
! Total flux subtracted in 200 components = 0.000168959 Jy
! Clean residual min=-0.001227 max=0.001771 Jy/beam
! Clean residual mean=0.000013 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.161353 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 85 components and 0.161353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088034Jy  sigma=0.000683
! Fit after  self-cal, rms=0.088035Jy  sigma=0.000683
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088035Jy  sigma=0.000683
! Fit after  self-cal, rms=0.088258Jy  sigma=0.000683
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.253 mas, bmaj=2.745 mas, bpa=68.14 degrees
! Estimated noise=479.281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235133 Jy
! Component: 100  -  total flux cleaned = 0.000236956 Jy
! Component: 150  -  total flux cleaned = 0.000260925 Jy
! Component: 200  -  total flux cleaned = 0.000239596 Jy
! Total flux subtracted in 200 components = 0.000239596 Jy
! Clean residual min=-0.001610 max=0.002146 Jy/beam
! Clean residual mean=0.000032 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.161593 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 92 components and 0.161593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088258Jy  sigma=0.000683
! Fit after  self-cal, rms=0.088270Jy  sigma=0.000683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130814 Jy
! Component: 100  -  total flux cleaned = 7.23812e-05 Jy
! Component: 150  -  total flux cleaned = 2.00261e-05 Jy
! Component: 200  -  total flux cleaned = -1.1298e-05 Jy
! Total flux subtracted in 200 components = -1.1298e-05 Jy
! Clean residual min=-0.001610 max=0.002107 Jy/beam
! Clean residual mean=0.000033 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.161581 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 102 components and 0.161581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088272Jy  sigma=0.000683
! Fit after  self-cal, rms=0.088270Jy  sigma=0.000683
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=1.278 mas, bpa=37.8 degrees
! Estimated noise=376.348 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.022 x 1.278 at 37.8 degrees (North through East)
! Clean map  min=-0.0017595  max=0.090411 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8158 mas, bmaj=0.9751 mas, bpa=34.06 degrees
! Estimated noise=930.85 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0647253 Jy
! Component: 100  -  total flux cleaned = 0.0936213 Jy
! Component: 150  -  total flux cleaned = 0.112204 Jy
! Component: 200  -  total flux cleaned = 0.125038 Jy
! Total flux subtracted in 200 components = 0.125038 Jy
! Clean residual min=-0.004045 max=0.007099 Jy/beam
! Clean residual mean=0.000002 rms=0.001070 Jy/beam
! Combined flux in latest and established models = 0.125038 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.125038 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=1.278 mas, bpa=37.8 degrees
! Estimated noise=376.348 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137663 Jy
! Component: 100  -  total flux cleaned = 0.0216207 Jy
! Component: 150  -  total flux cleaned = 0.0264949 Jy
! Component: 200  -  total flux cleaned = 0.0299172 Jy
! Total flux subtracted in 200 components = 0.0299172 Jy
! Clean residual min=-0.001729 max=0.002796 Jy/beam
! Clean residual mean=0.000010 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.154955 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.154955 Jy
! Inverting map 
! Added new window around map position (1.4, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00279638 Jy
! Component: 100  -  total flux cleaned = 0.00439303 Jy
! Component: 150  -  total flux cleaned = 0.00520374 Jy
! Component: 200  -  total flux cleaned = 0.00571914 Jy
! Total flux subtracted in 200 components = 0.00571914 Jy
! Clean residual min=-0.001433 max=0.001895 Jy/beam
! Clean residual mean=0.000015 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.160674 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 64 components and 0.160674 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.253 mas, bmaj=2.745 mas, bpa=68.14 degrees
! Estimated noise=479.281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000426041 Jy
! Component: 100  -  total flux cleaned = 0.000564299 Jy
! Component: 150  -  total flux cleaned = 0.000563041 Jy
! Component: 200  -  total flux cleaned = 0.000563326 Jy
! Total flux subtracted in 200 components = 0.000563326 Jy
! Clean residual min=-0.001604 max=0.002234 Jy/beam
! Clean residual mean=0.000031 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.161237 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.23995e-05 Jy
! Component: 100  -  total flux cleaned = 5.94202e-05 Jy
! Component: 150  -  total flux cleaned = 3.69067e-05 Jy
! Component: 200  -  total flux cleaned = 1.58588e-05 Jy
! Total flux subtracted in 200 components = 1.58588e-05 Jy
! Clean residual min=-0.001538 max=0.002165 Jy/beam
! Clean residual mean=0.000031 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.161253 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 88 components and 0.161253 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=1.278 mas, bpa=37.8 degrees
! Estimated noise=376.348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000304943 Jy
! Component: 100  -  total flux cleaned = -0.000276907 Jy
! Component: 150  -  total flux cleaned = -0.000175968 Jy
! Component: 200  -  total flux cleaned = -0.000131775 Jy
! Total flux subtracted in 200 components = -0.000131775 Jy
! Clean residual min=-0.001147 max=0.001773 Jy/beam
! Clean residual mean=0.000014 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.161121 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 105 components and 0.161121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088254Jy  sigma=0.000683
! Fit after  self-cal, rms=0.088237Jy  sigma=0.000683
wmodel J0947+5907_X_2017_05_31_pus_map.mod
! Writing 105 model components to file: J0947+5907_X_2017_05_31_pus_map.mod
wobs J0947+5907_X_2017_05_31_pus_uvs.fits
! Writing UV FITS file: J0947+5907_X_2017_05_31_pus_uvs.fits
wwins J0947+5907_X_2017_05_31_pus_map.win
! wwins: Wrote 5 windows to J0947+5907_X_2017_05_31_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000728616 Jy
! Component: 100  -  total flux cleaned = 0.00136317 Jy
! Component: 150  -  total flux cleaned = 0.00192759 Jy
! Component: 200  -  total flux cleaned = 0.0023713 Jy
! Component: 250  -  total flux cleaned = 0.00269 Jy
! Component: 300  -  total flux cleaned = 0.00295669 Jy
! Component: 350  -  total flux cleaned = 0.00313654 Jy
! Component: 400  -  total flux cleaned = 0.00334971 Jy
! Component: 450  -  total flux cleaned = 0.00351943 Jy
! Component: 500  -  total flux cleaned = 0.00363007 Jy
! Component: 550  -  total flux cleaned = 0.00381054 Jy
! Component: 600  -  total flux cleaned = 0.00393418 Jy
! Component: 650  -  total flux cleaned = 0.00410758 Jy
! Component: 700  -  total flux cleaned = 0.00427709 Jy
! Component: 750  -  total flux cleaned = 0.00442635 Jy
! Component: 800  -  total flux cleaned = 0.00458887 Jy
! Component: 850  -  total flux cleaned = 0.00465287 Jy
! Component: 900  -  total flux cleaned = 0.00477845 Jy
! Component: 950  -  total flux cleaned = 0.00490162 Jy
! Component: 1000  -  total flux cleaned = 0.00497731 Jy
! Component: 1050  -  total flux cleaned = 0.00502238 Jy
! Component: 1100  -  total flux cleaned = 0.00516932 Jy
! Component: 1150  -  total flux cleaned = 0.00524139 Jy
! Component: 1200  -  total flux cleaned = 0.00535494 Jy
! Component: 1250  -  total flux cleaned = 0.00536924 Jy
! Component: 1300  -  total flux cleaned = 0.00545222 Jy
! Component: 1350  -  total flux cleaned = 0.00547934 Jy
! Component: 1400  -  total flux cleaned = 0.00549291 Jy
! Component: 1450  -  total flux cleaned = 0.00551942 Jy
! Component: 1500  -  total flux cleaned = 0.00555851 Jy
! Component: 1550  -  total flux cleaned = 0.00557149 Jy
! Component: 1600  -  total flux cleaned = 0.00557156 Jy
! Component: 1650  -  total flux cleaned = 0.0055591 Jy
! Component: 1700  -  total flux cleaned = 0.00557157 Jy
! Component: 1750  -  total flux cleaned = 0.00553495 Jy
! Component: 1800  -  total flux cleaned = 0.00554717 Jy
! Component: 1850  -  total flux cleaned = 0.00555908 Jy
! Component: 1900  -  total flux cleaned = 0.00557067 Jy
! Component: 1950  -  total flux cleaned = 0.00557072 Jy
! Component: 2000  -  total flux cleaned = 0.00558221 Jy
! Total flux subtracted in 2048 components = 0.00555921 Jy
! Clean residual min=-0.000589 max=0.000715 Jy/beam
! Clean residual mean=0.000003 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.16668 Jy
keep
! Adding 180 model components to the UV plane model.
! The established model now contains 285 components and 0.166681 Jy
![Exited script file: muppet]
wmap "J0947+5907_X_2017_05_31_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.022 x 1.278 at 37.8 degrees (North through East)
! Clean map  min=-0.0011075  max=0.090832 Jy/beam
! Writing clean map to FITS file: J0947+5907_X_2017_05_31_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0908324 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225203 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.743797 0.743797 1.48759 2.97519 5.95037 11.9007 23.8015 47.603 95.206
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.09 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.022 x 1.278 at 37.8 degrees (North through East)
! Clean map  min=-0.0011075  max=0.090832 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0947+5907_X_2017_05_31_pus_uvs.log closed on Tue Feb  5 10:47:36 2019