! Started logfile: J0945-0153_S_2017_05_01_pus_uvs.log on Wed May 1 18:33:18 2019 obs J0945-0153_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0945-0153_S_2017_05_01_pus_uva.fits ! AN table 1: 111 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.734334 visibilities/baseline/integration-bin. ! Found source: J0945-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 14672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0945-0153_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 632 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.743581Jy sigma=0.022442 ! Fit after self-cal, rms=0.737145Jy sigma=0.022372 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=7.793 mas, bpa=-4.074 degrees ! Estimated noise=835.093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150875 Jy ! Component: 100 - total flux cleaned = 0.174161 Jy ! Total flux subtracted in 100 components = 0.174161 Jy ! Clean residual min=-0.041472 max=0.045626 Jy/beam ! Clean residual mean=0.000106 rms=0.013156 Jy/beam ! Combined flux in latest and established models = 0.174161 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.174161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150461Jy sigma=0.003824 ! Fit after self-cal, rms=0.150364Jy sigma=0.003823 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.542 mas, bmaj=8.6 mas, bpa=-4.568 degrees ! Estimated noise=622.601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218936 Jy ! Component: 100 - total flux cleaned = 0.0213714 Jy ! Component: 150 - total flux cleaned = 0.0195202 Jy ! Component: 200 - total flux cleaned = 0.0174923 Jy ! Total flux subtracted in 200 components = 0.0174923 Jy ! Clean residual min=-0.034715 max=0.044663 Jy/beam ! Clean residual mean=0.000096 rms=0.011885 Jy/beam ! Combined flux in latest and established models = 0.191653 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.191653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135274Jy sigma=0.004210 ! Fit after self-cal, rms=0.135242Jy sigma=0.004210 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.70 HN 0.90 KP 0.82 ! LA 0.78 MK 0.96 NL 0.80 OV 0.82 ! PT 0.82 SC 0.93 ! ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.73 HN 0.95 KP 0.79 ! LA 0.78 MK 0.95 NL 0.84 OV 0.85 ! PT 0.78 SC 0.99 ! ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.77 HN 0.94 KP 0.85 ! LA 0.87 MK 1.02 NL 0.89 OV 0.78 ! PT 0.84 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.83 HN 0.89 KP 1.00* ! LA 24.57 MK 1.04 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.135242Jy sigma=0.004210 ! Fit after self-cal, rms=0.944996Jy sigma=0.000778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=8.171 mas, bpa=-2.555 degrees ! Estimated noise=621.269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047975 Jy ! Component: 100 - total flux cleaned = 0.00733983 Jy ! Component: 150 - total flux cleaned = 0.00782311 Jy ! Component: 200 - total flux cleaned = 0.00829236 Jy ! Total flux subtracted in 200 components = 0.00829236 Jy ! Clean residual min=-0.003044 max=0.003318 Jy/beam ! Clean residual mean=0.000021 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.199946 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.199946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.944723Jy sigma=0.000776 ! Fit after self-cal, rms=0.945079Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.945079Jy sigma=0.000764 ! Fit after self-cal, rms=1.058987Jy sigma=0.000746 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=8.093 mas, bpa=-2.601 degrees ! Estimated noise=625.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347762 Jy ! Component: 100 - total flux cleaned = 0.00553208 Jy ! Component: 150 - total flux cleaned = 0.0063318 Jy ! Component: 200 - total flux cleaned = 0.00661771 Jy ! Total flux subtracted in 200 components = 0.00661771 Jy ! Clean residual min=-0.002782 max=0.002523 Jy/beam ! Clean residual mean=0.000030 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.206564 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 58 components and 0.206564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.058671Jy sigma=0.000746 ! Fit after self-cal, rms=1.058689Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159478 Jy ! Component: 100 - total flux cleaned = 0.000307639 Jy ! Component: 150 - total flux cleaned = 0.000407913 Jy ! Component: 200 - total flux cleaned = 0.000470024 Jy ! Total flux subtracted in 200 components = 0.000470024 Jy ! Clean residual min=-0.002690 max=0.002545 Jy/beam ! Clean residual mean=0.000029 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.207034 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 68 components and 0.207034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.058656Jy sigma=0.000745 ! Fit after self-cal, rms=1.058655Jy sigma=0.000745 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.058655Jy sigma=0.000745 ! Fit after self-cal, rms=0.560517Jy sigma=0.000724 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=8.058 mas, bpa=-2.589 degrees ! Estimated noise=626.272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153383 Jy ! Component: 100 - total flux cleaned = 0.00232301 Jy ! Component: 150 - total flux cleaned = 0.00251253 Jy ! Component: 200 - total flux cleaned = 0.00254153 Jy ! Total flux subtracted in 200 components = 0.00254153 Jy ! Clean residual min=-0.001766 max=0.002252 Jy/beam ! Clean residual mean=0.000005 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.209575 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.209575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.560459Jy sigma=0.000724 ! Fit after self-cal, rms=0.560442Jy sigma=0.000724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (99, 104). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136997 Jy ! Component: 100 - total flux cleaned = 0.00131833 Jy ! Component: 150 - total flux cleaned = 0.00142536 Jy ! Component: 200 - total flux cleaned = 0.00145399 Jy ! Total flux subtracted in 200 components = 0.00145399 Jy ! Clean residual min=-0.001758 max=0.001997 Jy/beam ! Clean residual mean=0.000005 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.211029 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 95 components and 0.211029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.560364Jy sigma=0.000723 ! Fit after self-cal, rms=0.560375Jy sigma=0.000723 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.560375Jy sigma=0.000723 ! Fit after self-cal, rms=0.565430Jy sigma=0.000723 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=12.62 mas, bpa=0.6737 degrees ! Estimated noise=748.151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012597 Jy ! Component: 100 - total flux cleaned = 0.00158284 Jy ! Component: 150 - total flux cleaned = 0.0017261 Jy ! Component: 200 - total flux cleaned = 0.00184612 Jy ! Total flux subtracted in 200 components = 0.00184612 Jy ! Clean residual min=-0.002005 max=0.002220 Jy/beam ! Clean residual mean=0.000010 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.212875 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 118 components and 0.212875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565398Jy sigma=0.000723 ! Fit after self-cal, rms=0.565396Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152693 Jy ! Component: 100 - total flux cleaned = 0.000209797 Jy ! Component: 150 - total flux cleaned = 0.000246885 Jy ! Component: 200 - total flux cleaned = 0.00026879 Jy ! Total flux subtracted in 200 components = 0.00026879 Jy ! Clean residual min=-0.002003 max=0.002159 Jy/beam ! Clean residual mean=0.000009 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.213144 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 134 components and 0.213144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565393Jy sigma=0.000723 ! Fit after self-cal, rms=0.565392Jy sigma=0.000723 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=8.036 mas, bpa=-2.55 degrees ! Estimated noise=628.101 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 8.036 at -2.55 degrees (North through East) ! Clean map min=-0.0016794 max=0.20694 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=7.198 mas, bpa=-3.115 degrees ! Estimated noise=883.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159435 Jy ! Component: 100 - total flux cleaned = 0.197183 Jy ! Component: 150 - total flux cleaned = 0.211102 Jy ! Component: 200 - total flux cleaned = 0.212856 Jy ! Total flux subtracted in 200 components = 0.212856 Jy ! Clean residual min=-0.004117 max=0.003895 Jy/beam ! Clean residual mean=0.000001 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.212856 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.212856 Jy ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=8.036 mas, bpa=-2.55 degrees ! Estimated noise=628.101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233936 Jy ! Component: 100 - total flux cleaned = 0.000584026 Jy ! Component: 150 - total flux cleaned = 0.000781507 Jy ! Component: 200 - total flux cleaned = 0.000866796 Jy ! Total flux subtracted in 200 components = 0.000866796 Jy ! Clean residual min=-0.001852 max=0.002057 Jy/beam ! Clean residual mean=0.000005 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.213723 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.213723 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=12.62 mas, bpa=0.6737 degrees ! Estimated noise=748.151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000624891 Jy ! Component: 100 - total flux cleaned = -0.000622041 Jy ! Component: 150 - total flux cleaned = -0.000677851 Jy ! Component: 200 - total flux cleaned = -0.000752097 Jy ! Total flux subtracted in 200 components = -0.000752097 Jy ! Clean residual min=-0.001954 max=0.002289 Jy/beam ! Clean residual mean=0.000010 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.21297 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.25229e-05 Jy ! Component: 100 - total flux cleaned = -6.10301e-05 Jy ! Component: 150 - total flux cleaned = -4.46299e-05 Jy ! Component: 200 - total flux cleaned = -4.46707e-05 Jy ! Total flux subtracted in 200 components = -4.46707e-05 Jy ! Clean residual min=-0.001969 max=0.002230 Jy/beam ! Clean residual mean=0.000010 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.212926 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 48 components and 0.212926 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=8.036 mas, bpa=-2.55 degrees ! Estimated noise=628.101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.37348e-05 Jy ! Component: 100 - total flux cleaned = -7.77009e-05 Jy ! Component: 150 - total flux cleaned = 3.23386e-05 Jy ! Component: 200 - total flux cleaned = 3.23055e-05 Jy ! Total flux subtracted in 200 components = 3.23055e-05 Jy ! Clean residual min=-0.001744 max=0.001940 Jy/beam ! Clean residual mean=0.000005 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.212958 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.212958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565342Jy sigma=0.000724 ! Fit after self-cal, rms=0.565341Jy sigma=0.000724 wmodel J0945-0153_S_2017_05_01_pus_map.mod ! Writing 61 model components to file: J0945-0153_S_2017_05_01_pus_map.mod wobs J0945-0153_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0945-0153_S_2017_05_01_pus_uvs.fits wwins J0945-0153_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0945-0153_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425614 Jy ! Component: 100 - total flux cleaned = 0.00071247 Jy ! Component: 150 - total flux cleaned = 0.000773583 Jy ! Component: 200 - total flux cleaned = 0.000773345 Jy ! Component: 250 - total flux cleaned = 0.000773016 Jy ! Component: 300 - total flux cleaned = 0.000801518 Jy ! Component: 350 - total flux cleaned = 0.000857472 Jy ! Component: 400 - total flux cleaned = 0.000992883 Jy ! Component: 450 - total flux cleaned = 0.00115189 Jy ! Component: 500 - total flux cleaned = 0.00117767 Jy ! Component: 550 - total flux cleaned = 0.00120277 Jy ! Component: 600 - total flux cleaned = 0.00125338 Jy ! Component: 650 - total flux cleaned = 0.00135289 Jy ! Component: 700 - total flux cleaned = 0.00145077 Jy ! Component: 750 - total flux cleaned = 0.00149914 Jy ! Component: 800 - total flux cleaned = 0.00164226 Jy ! Component: 850 - total flux cleaned = 0.00164219 Jy ! Component: 900 - total flux cleaned = 0.00164227 Jy ! Component: 950 - total flux cleaned = 0.00175717 Jy ! Component: 1000 - total flux cleaned = 0.00166619 Jy ! Component: 1050 - total flux cleaned = 0.00168905 Jy ! Component: 1100 - total flux cleaned = 0.00171162 Jy ! Component: 1150 - total flux cleaned = 0.00168968 Jy ! Component: 1200 - total flux cleaned = 0.00171171 Jy ! Component: 1250 - total flux cleaned = 0.00171171 Jy ! Component: 1300 - total flux cleaned = 0.0017119 Jy ! Component: 1350 - total flux cleaned = 0.00171224 Jy ! Component: 1400 - total flux cleaned = 0.00173308 Jy ! Component: 1450 - total flux cleaned = 0.00179538 Jy ! Component: 1500 - total flux cleaned = 0.00177466 Jy ! Component: 1550 - total flux cleaned = 0.00173398 Jy ! Component: 1600 - total flux cleaned = 0.00179448 Jy ! Component: 1650 - total flux cleaned = 0.00167414 Jy ! Component: 1700 - total flux cleaned = 0.00165436 Jy ! Component: 1750 - total flux cleaned = 0.00167402 Jy ! Component: 1800 - total flux cleaned = 0.00155677 Jy ! Component: 1850 - total flux cleaned = 0.00157645 Jy ! Component: 1900 - total flux cleaned = 0.00157634 Jy ! Component: 1950 - total flux cleaned = 0.00155731 Jy ! Component: 2000 - total flux cleaned = 0.00157593 Jy ! Component: 2050 - total flux cleaned = 0.00153831 Jy ! Component: 2100 - total flux cleaned = 0.00151954 Jy ! Component: 2150 - total flux cleaned = 0.00142718 Jy ! Component: 2200 - total flux cleaned = 0.0013906 Jy ! Component: 2250 - total flux cleaned = 0.00144518 Jy ! Component: 2300 - total flux cleaned = 0.00139083 Jy ! Component: 2350 - total flux cleaned = 0.00137273 Jy ! Component: 2400 - total flux cleaned = 0.00133696 Jy ! Component: 2450 - total flux cleaned = 0.00128382 Jy ! Component: 2500 - total flux cleaned = 0.00124877 Jy ! Component: 2550 - total flux cleaned = 0.00123109 Jy ! Component: 2600 - total flux cleaned = 0.00117898 Jy ! Component: 2650 - total flux cleaned = 0.00117881 Jy ! Component: 2700 - total flux cleaned = 0.00112756 Jy ! Component: 2750 - total flux cleaned = 0.0011615 Jy ! Component: 2800 - total flux cleaned = 0.00116147 Jy ! Component: 2850 - total flux cleaned = 0.00111089 Jy ! Component: 2900 - total flux cleaned = 0.00104399 Jy ! Component: 2950 - total flux cleaned = 0.00101077 Jy ! Component: 3000 - total flux cleaned = 0.000961249 Jy ! Component: 3050 - total flux cleaned = 0.00091202 Jy ! Component: 3100 - total flux cleaned = 0.000879483 Jy ! Component: 3150 - total flux cleaned = 0.000830897 Jy ! Component: 3200 - total flux cleaned = 0.000798785 Jy ! Component: 3250 - total flux cleaned = 0.000702685 Jy ! Component: 3300 - total flux cleaned = 0.000750699 Jy ! Component: 3350 - total flux cleaned = 0.00073481 Jy ! Component: 3400 - total flux cleaned = 0.000671922 Jy ! Component: 3450 - total flux cleaned = 0.000656357 Jy ! Component: 3500 - total flux cleaned = 0.000578561 Jy ! Component: 3550 - total flux cleaned = 0.000609556 Jy ! Component: 3600 - total flux cleaned = 0.000594213 Jy ! Component: 3650 - total flux cleaned = 0.000578899 Jy ! Component: 3700 - total flux cleaned = 0.000578866 Jy ! Component: 3750 - total flux cleaned = 0.000548577 Jy ! Component: 3800 - total flux cleaned = 0.000578678 Jy ! Component: 3850 - total flux cleaned = 0.000563695 Jy ! Component: 3900 - total flux cleaned = 0.000518887 Jy ! Component: 3950 - total flux cleaned = 0.00053368 Jy ! Component: 4000 - total flux cleaned = 0.000459865 Jy ! Component: 4050 - total flux cleaned = 0.000445112 Jy ! Total flux subtracted in 4096 components = 0.00041588 Jy ! Clean residual min=-0.000801 max=0.000735 Jy/beam ! Clean residual mean=0.000001 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.213374 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 365 components and 0.213374 Jy ![Exited script file: muppet] wmap "J0945-0153_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 8.036 at -2.55 degrees (North through East) ! Clean map min=-0.0015062 max=0.20452 Jy/beam ! Writing clean map to FITS file: J0945-0153_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.204525 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276228 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.405176 0.405176 0.810351 1.6207 3.24141 6.48281 12.9656 25.9312 51.8625 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.204 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 8.036 at -2.55 degrees (North through East) ! Clean map min=-0.0015062 max=0.20452 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0945-0153_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:33:23 2019